Shriram Shaligram Sonawane
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Shriram Shaligram Sonawane has a total of 100 co-authors. Here are the top co-authors by number of shared publications:
- Kailas Lachchhuram Wasewar
Advanced Separation and Analytical Laboratory (ASAL), Department of Chemical Engineering Visvesvaraya National Institute of Technology (VNIT) Nagpur India
13 shared publications - Ajit Pralhad Rathod
Department of Chemical Engineering Visvesvaraya National Institute of Technology Nagpur India
11 shared publications Manjakuppam Malika
Department of Chemical Engineering, B V Raju Institute of Technology, Narsapur, Medak District, India
11 shared publicationsMahesh N. Varma
Department of Chemical Engineering, Visvesvaraya National Institute of Technology (VNIT), South Ambazari Road, Nagpur (M.H.) 440010, India
10 shared publications- Rohit Sunil Khedkar
Department of Chemical Engineering, Sigma Institute of Engineering, Sigma University, Vadodara, Gujrat, 390019, India
8 shared publications Abhijit Gadhe
6 shared publications
Latest Publications
- Open Access
- 25 August 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (33) , e74267
Mechanistically Guided Machine Learning Modeling of Azithromycin Extraction Using TiO 2 Pickering‐Stabilized Emulsion Nanofluid Membranes
Azithromycin is a widely prescribed antibiotic frequently detected in aquatic environments due to its extensive consumption and incomplete removal by conventional wastewater treatment processes. In this study, a novel TiO 2 Pickering‐stabilized emulsion nanofluid membrane (ENM) system was developed for the selective extraction of azithromycin from aqueous solutions. The membrane phase consisted of n‐hexane as the diluent, tri‐octylamine (TOA) as the carrier/extractant, Span‐80 as the surfactant, and TiO 2 nanoparticles as stabilizing agents. The incorporation of TiO 2 nanoparticles enhanced emulsion stability, interfacial rigidity, and mass‐transfer characteristics through Pickering stabilization. The effects of nanoparticle concentration, ultrasonication time, and extractant concentration on extraction efficiency were optimized using response surface methodology (RSM). Under the optimized conditions, the ENM system achieved a maximum azithromycin extraction efficiency of 99.5% within only 3 min of contact time. Artificial neural network (ANN) modeling was employed to validate the experimental results and demonstrated excellent predictive capability, with correlation coefficients exceeding 0.99 for the training, testing, and validation datasets. The developed TiO 2 Pickering‐stabilized ENM system offers a rapid, stable, and sustainable approach for pharmaceutical wastewater treatment and selective antibiotic recovery from aqueous environments.
- 25 August 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (33) , e74267
Open AccessMechanistically Guided Machine Learning Modeling of Azithromycin Extraction Using TiO 2 Pickering‐Stabilized Emulsion Nanofluid Membranes
Azithromycin is a widely prescribed antibiotic frequently detected in aquatic environments due to its extensive consumption and incomplete removal by conventional wastewater treatment processes. In this study, a novel TiO 2 Pickering‐stabilized emulsion nanofluid membrane (ENM) system was developed for the selective extraction of azithromycin from aqueous solutions. The membrane phase consisted of n‐hexane as the diluent, tri‐octylamine (TOA) as the carrier/extractant, Span‐80 as the surfactant, and TiO 2 nanoparticles as stabilizing agents. The incorporation of TiO 2 nanoparticles enhanced emulsion stability, interfacial rigidity, and mass‐transfer characteristics through Pickering stabilization. The effects of nanoparticle concentration, ultrasonication time, and extractant concentration on extraction efficiency were optimized using response surface methodology (RSM). Under the optimized conditions, the ENM system achieved a maximum azithromycin extraction efficiency of 99.5% within only 3 min of contact time. Artificial neural network (ANN) modeling was employed to validate the experimental results and demonstrated excellent predictive capability, with correlation coefficients exceeding 0.99 for the training, testing, and validation datasets. The developed TiO 2 Pickering‐stabilized ENM system offers a rapid, stable, and sustainable approach for pharmaceutical wastewater treatment and selective antibiotic recovery from aqueous environments.
- 7 July 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
Development and performance evaluation of waste‐derived red mud–fly ash ceramic membranes for dye‐contaminated wastewater treatment
In this study, low‐cost ceramic membranes were fabricated from industrial wastes (red mud and fly ash) for the removal of methylene blue (MB) dye from aqueous solutions. Ceramic membranes were produced using a uniaxial compaction approach and subsequently subjected to thermal treatment in the range of 600–900°C to examine the effect of sintering conditions on structural characteristics and filtration behaviour. A comprehensive set of analytical techniques, including thermogravimetric analysis (TGA), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), and energy‐dispersive X‐ray analysis (EDX), was employed to evaluate phase composition and microstructural features, confirming the formation of a stable aluminosilicate framework with a well‐connected pore structure. The membrane sintered at 700°C exhibited an optimal balance between porosity, mechanical integrity, and permeability. As the sintering temperature increased, porosity decreased due to progressive densification and grain growth. Filtration experiments performed at transmembrane pressures of 0.2–0.8 bar and MB concentrations of 10–110 mg · L −1 showed dye rejection exceeding 94% under low‐pressure and low‐concentration conditions. A slight decline in dye rejection at higher pressure and concentration was attributed to concentration polarization and partial pore blockage. The operating parameters, namely transmembrane pressure and feed concentration, were optimized using response surface methodology (RSM) based on a central composite design (CCD) to evaluate their effects on permeate flux and dye rejection. The results demonstrate that red mud–fly ash–derived ceramic membranes offer a sustainable and cost‐effective alternative for dye‐laden wastewater treatment.
- 7 July 2026
- Published by Wiley in The Canadian Journal of Chemical Engineering
Development and performance evaluation of waste‐derived red mud–fly ash ceramic membranes for dye‐contaminated wastewater treatment
In this study, low‐cost ceramic membranes were fabricated from industrial wastes (red mud and fly ash) for the removal of methylene blue (MB) dye from aqueous solutions. Ceramic membranes were produced using a uniaxial compaction approach and subsequently subjected to thermal treatment in the range of 600–900°C to examine the effect of sintering conditions on structural characteristics and filtration behaviour. A comprehensive set of analytical techniques, including thermogravimetric analysis (TGA), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), and energy‐dispersive X‐ray analysis (EDX), was employed to evaluate phase composition and microstructural features, confirming the formation of a stable aluminosilicate framework with a well‐connected pore structure. The membrane sintered at 700°C exhibited an optimal balance between porosity, mechanical integrity, and permeability. As the sintering temperature increased, porosity decreased due to progressive densification and grain growth. Filtration experiments performed at transmembrane pressures of 0.2–0.8 bar and MB concentrations of 10–110 mg · L −1 showed dye rejection exceeding 94% under low‐pressure and low‐concentration conditions. A slight decline in dye rejection at higher pressure and concentration was attributed to concentration polarization and partial pore blockage. The operating parameters, namely transmembrane pressure and feed concentration, were optimized using response surface methodology (RSM) based on a central composite design (CCD) to evaluate their effects on permeate flux and dye rejection. The results demonstrate that red mud–fly ash–derived ceramic membranes offer a sustainable and cost‐effective alternative for dye‐laden wastewater treatment.
- 25 May 2026
- Published by Springer Nature in Chemical Papers
- Vol. 80 (10) , 1-29
A review on emulsion nanofluid membranes: next-generation technology for water and industrial wastewater purification
- 25 May 2026
- Published by Springer Nature in Chemical Papers
- Vol. 80 (10) , 1-29
A review on emulsion nanofluid membranes: next-generation technology for water and industrial wastewater purification
- 19 June 2025
- Published by Walter de Gruyter GmbH in Chemical Product and Process Modeling
- Vol. 21 (3) , 297-309
Optimization of iron (III) oxide nanoparticles production from natural waste for use in wastewater applications
Research on environmentally friendly synthesis using natural waste materials has gained momentum due to the increasing demand for sustainable nanomaterials. This study proposes a green synthesis approach for Fe 2 O 3 nanoparticles using an extract from Golden Shower Flower as a natural stabilizing agent. The environmental impact of this bio-based synthesis is assessed through a Life Cycle Assessment (LCA) framework, following ISO 14040-44 standards, and is compared to conventional chemical methods. Key findings indicate that this approach significantly reduces environmental impact, including climate change potential (0.002022 kg CO 2 ), fossil depletion (3.17E-07 kg oil eq.), and human toxicity levels, making it a more sustainable alternative. However, potential environmental trade-offs exist due to the energy consumption required for extract preparation and purification. To further optimize the synthesis process, a response function model was developed using Central Composite Design (CCD), achieving a high R 2 value of 0.998, confirming strong predictive accuracy. A confirmatory experiment using optimized conditions – 0.03 M precursor concentration, 80.5 min of ultrasonication, and 550 °C calcination – resulted in the production of Fe 2 O 3 nanoparticles with an average size of approximately 15 nm. The synthesized Fe 2 O 3 nanoparticles exhibited excellent performance in wastewater treatment, offering a dual environmental benefit by reducing waste while improving water purification solutions. The uniform particle size distribution and magnetic properties reinforce the potential of waste-derived nanomaterials in driving sustainable nanotechnology. Additionally, they emphasize the importance of scalability, process optimization, and industrial integration in realizing a circular economy-driven approach.
- 19 June 2025
- Published by Walter de Gruyter GmbH in Chemical Product and Process Modeling
- Vol. 21 (3) , 297-309
Optimization of iron (III) oxide nanoparticles production from natural waste for use in wastewater applications
Research on environmentally friendly synthesis using natural waste materials has gained momentum due to the increasing demand for sustainable nanomaterials. This study proposes a green synthesis approach for Fe 2 O 3 nanoparticles using an extract from Golden Shower Flower as a natural stabilizing agent. The environmental impact of this bio-based synthesis is assessed through a Life Cycle Assessment (LCA) framework, following ISO 14040-44 standards, and is compared to conventional chemical methods. Key findings indicate that this approach significantly reduces environmental impact, including climate change potential (0.002022 kg CO 2 ), fossil depletion (3.17E-07 kg oil eq.), and human toxicity levels, making it a more sustainable alternative. However, potential environmental trade-offs exist due to the energy consumption required for extract preparation and purification. To further optimize the synthesis process, a response function model was developed using Central Composite Design (CCD), achieving a high R 2 value of 0.998, confirming strong predictive accuracy. A confirmatory experiment using optimized conditions – 0.03 M precursor concentration, 80.5 min of ultrasonication, and 550 °C calcination – resulted in the production of Fe 2 O 3 nanoparticles with an average size of approximately 15 nm. The synthesized Fe 2 O 3 nanoparticles exhibited excellent performance in wastewater treatment, offering a dual environmental benefit by reducing waste while improving water purification solutions. The uniform particle size distribution and magnetic properties reinforce the potential of waste-derived nanomaterials in driving sustainable nanotechnology. Additionally, they emphasize the importance of scalability, process optimization, and industrial integration in realizing a circular economy-driven approach.
- 1 May 2024
- Published by Bentham Science Publishers Ltd. in Current Nanoscience
- Vol. 20 (3) , 314-327
Review on the Encapsulation, Microencapsulation, and Nano- Encapsulation: Synthesis and Applications in the Process Industry for Corrosion Inhibition
Background: Surfaces of materials often corrode and deteriorate due to environmental conditions. There are various widely used methods of reducing corrosion rates to increase the lifetime of materials and equipment. Recently, there has been a growth in the use of nanotechnology to protect metals against corrosion. The application of nano-encapsulation techniques in the process industry is one of the important eras of nanotechnology. This review paper focuses on encapsulation, microencapsulation, and nano-encapsulation methods, emphasizing nanoencapsulation applications as corrosion inhibitions in the process industry. Methods: Materials based on the self-healing mechanism were used in advanced applications such as structures, batteries, and coatings. These technologies may be studied in two ways: compounds with intrinsic self-healing properties and extrinsic self-healing materials with additives such as microcapsules filled with healing agents. Nano-coatings have advantages, like accelerated ground hardness, adhesive energy, long-time period and/or high-temperature corrosion resistance, tribological residence enhancement, etc. Nano-coatings can also be carried out in thinner and smoother layers, considering flexibility, accelerated performance, decreased fuel costs, and smaller carbon footprints, as well as occasional maintenance. The review of corrosion characteristics of polymeric nanocomposite material was discussed in this paper. Results: This review paper presents an updated overview summarizing the latest advances in the various micro/nanocarriers used for self-healing corrosion protective coatings. Conclusion: With this information, the investigators will be able to modify the structure of the inhibitor to get the necessary corrosion inhibition capabilities. The need for a physical examination is rising as a result.
- 1 May 2024
- Published by Bentham Science Publishers Ltd. in Current Nanoscience
- Vol. 20 (3) , 314-327
Review on the Encapsulation, Microencapsulation, and Nano- Encapsulation: Synthesis and Applications in the Process Industry for Corrosion Inhibition
Background: Surfaces of materials often corrode and deteriorate due to environmental conditions. There are various widely used methods of reducing corrosion rates to increase the lifetime of materials and equipment. Recently, there has been a growth in the use of nanotechnology to protect metals against corrosion. The application of nano-encapsulation techniques in the process industry is one of the important eras of nanotechnology. This review paper focuses on encapsulation, microencapsulation, and nano-encapsulation methods, emphasizing nanoencapsulation applications as corrosion inhibitions in the process industry. Methods: Materials based on the self-healing mechanism were used in advanced applications such as structures, batteries, and coatings. These technologies may be studied in two ways: compounds with intrinsic self-healing properties and extrinsic self-healing materials with additives such as microcapsules filled with healing agents. Nano-coatings have advantages, like accelerated ground hardness, adhesive energy, long-time period and/or high-temperature corrosion resistance, tribological residence enhancement, etc. Nano-coatings can also be carried out in thinner and smoother layers, considering flexibility, accelerated performance, decreased fuel costs, and smaller carbon footprints, as well as occasional maintenance. The review of corrosion characteristics of polymeric nanocomposite material was discussed in this paper. Results: This review paper presents an updated overview summarizing the latest advances in the various micro/nanocarriers used for self-healing corrosion protective coatings. Conclusion: With this information, the investigators will be able to modify the structure of the inhibitor to get the necessary corrosion inhibition capabilities. The need for a physical examination is rising as a result.
- 1 May 2024
- Published by Bentham Science Publishers Ltd. in Current Nanoscience
- Vol. 20 (3) , 328-338
A Review on the Application of Nanofluids in Enhanced Oil Recovery
Oil mobility has been a significant issue since the recovery of a heavy crude reservoir. It is determined by two factors: oil rheological properties and penetrability. Nanofluids (NFs) are a distinct class of engineered fluids characterized by the dispersion of nanoparticles ranging in size from 1 to 100 nanometers (nm) into a working fluid. They are divided into groups based on physicochemical characteristics, including nanoparticle morphology, and thermal and rheological properties. The well-known nanofluids composed of metal (e.g., ZrO2) and ceramic (e.g., SiO2) had the best physicochemical performance in terms of oil mobility. This chapter examines the inundation of metal and nonmetal based nanofluids as a new enhanced oil extraction (EOR) method for extracting primary and secondary oil from more than 45% of confined reservoir fluids. Furthermore, new developments in the utilization of these materials on EOR approaches to combat significant interfacial adhesion across sandstone and fluid interfaces are summarized.
- 1 May 2024
- Published by Bentham Science Publishers Ltd. in Current Nanoscience
- Vol. 20 (3) , 328-338
A Review on the Application of Nanofluids in Enhanced Oil Recovery
Oil mobility has been a significant issue since the recovery of a heavy crude reservoir. It is determined by two factors: oil rheological properties and penetrability. Nanofluids (NFs) are a distinct class of engineered fluids characterized by the dispersion of nanoparticles ranging in size from 1 to 100 nanometers (nm) into a working fluid. They are divided into groups based on physicochemical characteristics, including nanoparticle morphology, and thermal and rheological properties. The well-known nanofluids composed of metal (e.g., ZrO2) and ceramic (e.g., SiO2) had the best physicochemical performance in terms of oil mobility. This chapter examines the inundation of metal and nonmetal based nanofluids as a new enhanced oil extraction (EOR) method for extracting primary and secondary oil from more than 45% of confined reservoir fluids. Furthermore, new developments in the utilization of these materials on EOR approaches to combat significant interfacial adhesion across sandstone and fluid interfaces are summarized.
- 12 March 2024
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 10 (2) , 460-471
Performance of an Emulsion Nanofluid Membrane for the Extraction of Antimony Heavy Metal: Experimental and Numerical Investigation
- 12 March 2024
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 10 (2) , 460-471
Performance of an Emulsion Nanofluid Membrane for the Extraction of Antimony Heavy Metal: Experimental and Numerical Investigation
- Top Cited Papers
- 4 January 2024
- Published by Elsevier in Chemosphere
- Vol. 350, 141127
A review of microbial fuel cell and its diversification in the development of green energy technology
- 4 January 2024
- Published by Elsevier in Chemosphere
- Vol. 350, 141127
Top Cited PapersA review of microbial fuel cell and its diversification in the development of green energy technology
- 28 July 2023
- Published by Elsevier
- p. 145-164
Sulfate/sulfur recovery from municipal wastewater treatment plants
- 28 July 2023
- Published by Elsevier
- p. 145-164
Sulfate/sulfur recovery from municipal wastewater treatment plants
- 26 July 2023
- Published by Institution of Engineering and Technology (IET) in IET Conference Proceedings
- Vol. 2023 (5) , 448-454
Smart IOT based pothole detection and filling system
Choose from multiple DOI resolution options
- 26 July 2023
- Published by Institution of Engineering and Technology (IET) in IET Conference Proceedings
- Vol. 2023 (5) , 448-454
Smart IOT based pothole detection and filling system
Choose from multiple DOI resolution options