Yan Lin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yan Lin has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Zhongtao Li
State Key Laboratory of Heavy Oil Processing, College of Chemical Engineering, China University of Petroleum (East China), QingDao, P. R. China
6 shared publications - Xun Wang
Engineering Research Center of Advanced Rare Earth Materials, Department of Chemistry, Tsinghua University, Beijing, China
5 shared publications - Hao Ren
Shandong Key Laboratory of Intelligent Energy Materials, School of Materials Science and Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, China
4 shared publications Haoyang Li
Tsinghua University
4 shared publicationsHui Li
State Key Laboratory of Heavy Oil Processing, College of Chemical Engineering, China University of Petroleum (East China), QingDao, P. R. China
3 shared publicationsXifeng Yu
State Key Laboratory of Heavy Oil Processing, College of Chemical Engineering, China University of Petroleum (East China), QingDao, P. R. China
3 shared publications
Latest Publications
- 27 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Phase Engineering of Fe-Polyoxometalate Sub-1 nm Assemblies for High-Efficiency Photoelectrocatalytic Nitrogen Reduction
Iron-substituted polyoxometalate (Fe-POM) clusters are promising candidates for photoelectrocatalytic nitrogen reduction due to their photosensitive and electron-buffering capabilities. However, their catalytic performances are severely hindered by the intrinsic cluster configuration and dissolution-induced detachment on the electrode. Here, using Fe-POM as “superatom” building blocks, we prepared a series of one-dimensional (1D) subnanowires and two-dimensional (2D) subnanosheets driven by different cation ligands, where clusters are connected directly with a controllable arrangement. Three kinds of Keggin-type clusters can be employed as building blocks, indicating the generality of this synthetic strategy. 1D subnanowires exhibit extraordinary catalytic activity toward the photoelectrocatalytic nitrogen reduction reaction (PEC-NRR), with a high ammonia yield of 72.0 μg h–1 mg–1, representing a 4.47-fold enhancement over the discrete clusters. Experimental and theoretical evidence demonstrate that electron delocalization among Fe-POM assemblies results in narrower band gaps and enhanced light harvesting, which also lowers the energy barrier for the rate-determining step (*NNH formation). Different from the microenvironment design of active sites, the superstructural engineering may offer a versatile paradigm for the electronic structure modulation of catalysts.
- 27 July 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Phase Engineering of Fe-Polyoxometalate Sub-1 nm Assemblies for High-Efficiency Photoelectrocatalytic Nitrogen Reduction
Iron-substituted polyoxometalate (Fe-POM) clusters are promising candidates for photoelectrocatalytic nitrogen reduction due to their photosensitive and electron-buffering capabilities. However, their catalytic performances are severely hindered by the intrinsic cluster configuration and dissolution-induced detachment on the electrode. Here, using Fe-POM as “superatom” building blocks, we prepared a series of one-dimensional (1D) subnanowires and two-dimensional (2D) subnanosheets driven by different cation ligands, where clusters are connected directly with a controllable arrangement. Three kinds of Keggin-type clusters can be employed as building blocks, indicating the generality of this synthetic strategy. 1D subnanowires exhibit extraordinary catalytic activity toward the photoelectrocatalytic nitrogen reduction reaction (PEC-NRR), with a high ammonia yield of 72.0 μg h–1 mg–1, representing a 4.47-fold enhancement over the discrete clusters. Experimental and theoretical evidence demonstrate that electron delocalization among Fe-POM assemblies results in narrower band gaps and enhanced light harvesting, which also lowers the energy barrier for the rate-determining step (*NNH formation). Different from the microenvironment design of active sites, the superstructural engineering may offer a versatile paradigm for the electronic structure modulation of catalysts.
- Open Access
- 26 June 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (26) , eaee9634
A subnanoscale dynamic-integrated catalytic system for bioinspired photoelectrochemical ammonia synthesis
Photoelectrochemical nitrogen (N) fixation to ammonia (NH 3 ) is a sustainable route for hydrogen storage yet limited by the stubborn N≡N bond and competitive interfacial reaction kinetics. Inspired by nitrogenase, we design single-atom iron (Fe)–doped tungsten oxide (WO 3 ) subnanowires as a bioinspired, dynamically integrated catalytic platform to systematically overcome these challenges: (i) The distorted lattice and asymmetric sites create a dynamically responsive catalytic center, where photoinduced valence-lattice oscillation drives electron delocalization, shifting the conventional N 2 adsorption mode and reaction pathway; (ii) the unique self-adhesive and film-forming properties enable robust, binder-free electrodes with maximized active-site exposure; and (iii) surface ligand engineering establishes a bioinspired microenvironment that selectively enriches N 2 and regulates proton access. This system achieves an NH 3 yield of 286 micrograms per milligram of catalyst per hour, a 24-fold improvement over conventional Fe-WO 3 nanowires, with stable performance over 30 cycles. This work demonstrates functionally integrated, bioinspired catalysis at the subnanoscale, offering a paradigm for efficient molecular conversion.
- 26 June 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (26) , eaee9634
Open AccessA subnanoscale dynamic-integrated catalytic system for bioinspired photoelectrochemical ammonia synthesis
Photoelectrochemical nitrogen (N) fixation to ammonia (NH 3 ) is a sustainable route for hydrogen storage yet limited by the stubborn N≡N bond and competitive interfacial reaction kinetics. Inspired by nitrogenase, we design single-atom iron (Fe)–doped tungsten oxide (WO 3 ) subnanowires as a bioinspired, dynamically integrated catalytic platform to systematically overcome these challenges: (i) The distorted lattice and asymmetric sites create a dynamically responsive catalytic center, where photoinduced valence-lattice oscillation drives electron delocalization, shifting the conventional N 2 adsorption mode and reaction pathway; (ii) the unique self-adhesive and film-forming properties enable robust, binder-free electrodes with maximized active-site exposure; and (iii) surface ligand engineering establishes a bioinspired microenvironment that selectively enriches N 2 and regulates proton access. This system achieves an NH 3 yield of 286 micrograms per milligram of catalyst per hour, a 24-fold improvement over conventional Fe-WO 3 nanowires, with stable performance over 30 cycles. This work demonstrates functionally integrated, bioinspired catalysis at the subnanoscale, offering a paradigm for efficient molecular conversion.
- Open Access
- 11 May 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Sustained Direct Electro-epoxidation of Ethylene via a Strain-Gradient CuO–Ag Interface
Direct electrochemical ethylene epoxidation using water as the oxygen source offers a sustainable alternative to conventional thermal processes, but practical implementation is constrained by insufficient ethylene adsorption and the inherent instability of the critical OO* intermediate. Here we show that a CuO/Ag catalyst engineered with coupled strain and electronic properties promotes exposure of metastable Ag(111) facets to strengthen ethylene adsorption and establishes a dual-reagent confinement system that enriches H2O and C2H4 at respective interfacial domains. Characterization and simulation reveal that dynamic charge oscillations at the interface induce an electron flow from Ag to CuO, which facilitates C=C bond activation and stabilizes the OO* intermediate by suppressing O–O bond cleavage. In a membrane electrode assembly reactor, a stable ethylene oxide production rate of 345 μmol·cm−2·h−1 is achieved at 50 mA·cm−2 over 60 hours, with a Faradaic efficiency of 45.6% and a selectivity of 92.8%. This work validates interfacial strain and electronic properties as a viable strategy for sustainable electrified synthesis, as exemplified by the continuous direct epoxidation of ethylene.
- 11 May 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessSustained Direct Electro-epoxidation of Ethylene via a Strain-Gradient CuO–Ag Interface
Direct electrochemical ethylene epoxidation using water as the oxygen source offers a sustainable alternative to conventional thermal processes, but practical implementation is constrained by insufficient ethylene adsorption and the inherent instability of the critical OO* intermediate. Here we show that a CuO/Ag catalyst engineered with coupled strain and electronic properties promotes exposure of metastable Ag(111) facets to strengthen ethylene adsorption and establishes a dual-reagent confinement system that enriches H2O and C2H4 at respective interfacial domains. Characterization and simulation reveal that dynamic charge oscillations at the interface induce an electron flow from Ag to CuO, which facilitates C=C bond activation and stabilizes the OO* intermediate by suppressing O–O bond cleavage. In a membrane electrode assembly reactor, a stable ethylene oxide production rate of 345 μmol·cm−2·h−1 is achieved at 50 mA·cm−2 over 60 hours, with a Faradaic efficiency of 45.6% and a selectivity of 92.8%. This work validates interfacial strain and electronic properties as a viable strategy for sustainable electrified synthesis, as exemplified by the continuous direct epoxidation of ethylene.
- 17 April 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Directing the Two-Dimensional Assembly of Polyoxometalates via Surface Chemistry
The controlled assembly of polyoxometalate (POM) clusters into ordered superstructures offers a powerful route to developing advanced catalysts. However, it remains unclear how the surface properties of POM clusters govern the assembly process and affect their catalytic performance. In this study, we precisely modulate the surface chemistry of POM clusters via mono- and di-Mn substitution, thereby directing the selective assembly of two nanosheet (NS) superstructures with hexagonal and oblique symmetries, respectively. In direct electro-epoxidation of propylene, the Mn2PW10 NS demonstrates markedly enhanced performance, with the Faraday efficiency increased by 4.4 times compared to the MnPW11 NS. Density functional theory calculations and molecular dynamics simulations reveal that incorporating metals into the POM framework modulates surface charge and ligand orientation, thereby directing the formation of distinct superstructures. Collision dynamics analyses further reveal that the surface ligand distribution affects reactant adsorption and diffusion, consequently affecting catalytic activity. This work not only establishes cluster surface engineering as a powerful strategy for constructing tailored subnanometric assemblies, but also provides deep insight into how the surface characteristics of these assemblies govern catalytic behavior.
- 17 April 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Directing the Two-Dimensional Assembly of Polyoxometalates via Surface Chemistry
The controlled assembly of polyoxometalate (POM) clusters into ordered superstructures offers a powerful route to developing advanced catalysts. However, it remains unclear how the surface properties of POM clusters govern the assembly process and affect their catalytic performance. In this study, we precisely modulate the surface chemistry of POM clusters via mono- and di-Mn substitution, thereby directing the selective assembly of two nanosheet (NS) superstructures with hexagonal and oblique symmetries, respectively. In direct electro-epoxidation of propylene, the Mn2PW10 NS demonstrates markedly enhanced performance, with the Faraday efficiency increased by 4.4 times compared to the MnPW11 NS. Density functional theory calculations and molecular dynamics simulations reveal that incorporating metals into the POM framework modulates surface charge and ligand orientation, thereby directing the formation of distinct superstructures. Collision dynamics analyses further reveal that the surface ligand distribution affects reactant adsorption and diffusion, consequently affecting catalytic activity. This work not only establishes cluster surface engineering as a powerful strategy for constructing tailored subnanometric assemblies, but also provides deep insight into how the surface characteristics of these assemblies govern catalytic behavior.
- 19 January 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale Horizons
- Vol. 11 (4) , 972-982
Direct electrocatalytic epoxidation of olefins: advances in membrane electrode assemblies and beyond
This review summarizes advances in MEA reactors for direct olefin epoxidation. We highlight strategies to bridge catalyst activity and system stability via interfacial engineering, enabling sustainable chemical synthesis.
- 19 January 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale Horizons
- Vol. 11 (4) , 972-982
Direct electrocatalytic epoxidation of olefins: advances in membrane electrode assemblies and beyond
This review summarizes advances in MEA reactors for direct olefin epoxidation. We highlight strategies to bridge catalyst activity and system stability via interfacial engineering, enabling sustainable chemical synthesis.
- 16 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (3) , 3862-3871
Atomically Precise Single-Walled Cluster Nanotubes of Giant Polyoxometalates
Single-walled nanotubes have attracted extensive research interest since their discovery due to their remarkable physical and chemical properties. Here, we synthesized the single-walled cluster nanotubes with an atomically precise structure by directly linking the largest building blocks, Preyssler-type polyoxometalate clusters (each comprising ∼150 atoms) with rare-earth metal ions. The atomically precise assembly process of the nanotube enabled the capture of key growth intermediates, thereby revealing a cluster-to-cluster assembly pathway and leading to the proposal of a wall-fusion growth mechanism. Owing to electron delocalization between the internal polyoxometalate clusters, the nanotube exhibits exceptional catalytic activity for the electrocatalytic reduction of phenol to cyclohexanone, achieving 92% selectivity and 64% Faradaic efficiency. This work elucidates the molecular-level growth mechanism of single-walled cluster nanotubes and links their directional assembly to superior electron transport and catalytic efficiency, providing a conceptual foundation for the rational design of high-performance nanotube catalysts.
- 16 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (3) , 3862-3871
Atomically Precise Single-Walled Cluster Nanotubes of Giant Polyoxometalates
Single-walled nanotubes have attracted extensive research interest since their discovery due to their remarkable physical and chemical properties. Here, we synthesized the single-walled cluster nanotubes with an atomically precise structure by directly linking the largest building blocks, Preyssler-type polyoxometalate clusters (each comprising ∼150 atoms) with rare-earth metal ions. The atomically precise assembly process of the nanotube enabled the capture of key growth intermediates, thereby revealing a cluster-to-cluster assembly pathway and leading to the proposal of a wall-fusion growth mechanism. Owing to electron delocalization between the internal polyoxometalate clusters, the nanotube exhibits exceptional catalytic activity for the electrocatalytic reduction of phenol to cyclohexanone, achieving 92% selectivity and 64% Faradaic efficiency. This work elucidates the molecular-level growth mechanism of single-walled cluster nanotubes and links their directional assembly to superior electron transport and catalytic efficiency, providing a conceptual foundation for the rational design of high-performance nanotube catalysts.
- 21 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (30) , 42980-42989
Regulation of Surface Reactant Adsorption for Efficient Electroreduction of Phenol on Pt–Cu Bimetallic Catalyst
Cycloalkyl alcohols are important raw materials for the synthesis of biodegradable plastics, such as ε-caprolactone (derived from cyclohexanol) for polycaprolactone (PCL) and certain monomers for polyhydroxyalkanoates (PHA). The development of high-performance electrocatalysts for the efficient and selective production of cycloalkanols remains challenging. In this work, Pt-Cu bimetallic catalysts were prepared by using the polyol solvothermal reduction method. At a current density of 20 mA/cm-2, after 8 h of electrolysis, the conversion rate of phenol reached 91.3% and the selectivity of cyclohexanol reached 80.1%, demonstrating the most advanced comprehensive performance currently available. Characterization and theoretical calculations indicate that Pt sites are responsible for providing sites for the reduction process of phenol, while Cu enhances the adsorption ability of the reactant phenol and the desorption ability of the product cyclohexanol while inhibiting the occurrence of the HER to minimize byproduct formation. This synthetic approach provides insights and solutions for obtaining key raw materials in the green synthesis of biodegradable plastics.
- 21 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (30) , 42980-42989
Regulation of Surface Reactant Adsorption for Efficient Electroreduction of Phenol on Pt–Cu Bimetallic Catalyst
Cycloalkyl alcohols are important raw materials for the synthesis of biodegradable plastics, such as ε-caprolactone (derived from cyclohexanol) for polycaprolactone (PCL) and certain monomers for polyhydroxyalkanoates (PHA). The development of high-performance electrocatalysts for the efficient and selective production of cycloalkanols remains challenging. In this work, Pt-Cu bimetallic catalysts were prepared by using the polyol solvothermal reduction method. At a current density of 20 mA/cm-2, after 8 h of electrolysis, the conversion rate of phenol reached 91.3% and the selectivity of cyclohexanol reached 80.1%, demonstrating the most advanced comprehensive performance currently available. Characterization and theoretical calculations indicate that Pt sites are responsible for providing sites for the reduction process of phenol, while Cu enhances the adsorption ability of the reactant phenol and the desorption ability of the product cyclohexanol while inhibiting the occurrence of the HER to minimize byproduct formation. This synthetic approach provides insights and solutions for obtaining key raw materials in the green synthesis of biodegradable plastics.
- Open Access
- 1 April 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
V activated electro-epoxidation catalyst in membrane electrode assembly system for the production of propylene oxide
Direct electro-epoxidation of propylene (D-EOPO) with a membrane electrode assembly (MEA) system represents a sustainable approach for producing propylene oxide, which can reduce ohmic losses and simplify product separation. To address the challenges of selectivity and activity, we develop an Ag/V catalyst and integrate it into the “liquid-free” MEA reactor for continues D-EOPO. The V in the catalyst facilitates the formation of Ag-O active centers, thereby reducing the generation energy of *O radicals. Meanwhile, V doping also results in a downshift of the d-band center of the Ag sites. Consequently, the formation of the crucial intermediate (*OC3H6) is significantly accelerated through the coupling *O with adsorbed propylene, thereby markedly improving propylene oxide (PO) production. The MEA reactor, integrated with the developed Ag/V catalyst, can maintain a stable production rate of PO at 227 μmol/h over a period of 78 hours. Thus, the “liquid-free” electro-epoxidation protocol developed here exhibits greater industrial applicability.
- 1 April 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Open AccessV activated electro-epoxidation catalyst in membrane electrode assembly system for the production of propylene oxide
Direct electro-epoxidation of propylene (D-EOPO) with a membrane electrode assembly (MEA) system represents a sustainable approach for producing propylene oxide, which can reduce ohmic losses and simplify product separation. To address the challenges of selectivity and activity, we develop an Ag/V catalyst and integrate it into the “liquid-free” MEA reactor for continues D-EOPO. The V in the catalyst facilitates the formation of Ag-O active centers, thereby reducing the generation energy of *O radicals. Meanwhile, V doping also results in a downshift of the d-band center of the Ag sites. Consequently, the formation of the crucial intermediate (*OC3H6) is significantly accelerated through the coupling *O with adsorbed propylene, thereby markedly improving propylene oxide (PO) production. The MEA reactor, integrated with the developed Ag/V catalyst, can maintain a stable production rate of PO at 227 μmol/h over a period of 78 hours. Thus, the “liquid-free” electro-epoxidation protocol developed here exhibits greater industrial applicability.
- 10 October 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (42) , 28874-28884
Cluster-Cation Pairs Mediated Assembly of Subnanometer Polyoxometalates Superstructures
Superstructures assembled by subnanometer polyoxometalate (POM) clusters are interesting for their attractive structures and excellent properties. However, the complex interactions between clusters and cations make it challenging to control the assembly of POM clusters at the subnanometer scale. Here, 20 cluster-assembled superstructures built by two types of MP2W17O61 (M = La-Lu) clusters are successfully synthesized. The precise structures and configurations of the subnanostructures, including nanowires, tetragonal nanosheets, and rectangular nanosheets, are characterized and presented. Molecular dynamics (MD) simulations reveal that the difference in interactions of POM clusters and cations leads to the formation of distinct superstructures. Two mechanisms of superstructure formation are proposed. Furthermore, the EuP2W17 nanosheet behaves with a high Faradaic efficiency of 90.2% and selectivity of 87.3% for glycolic acid in the electrocatalytic ethylene glycol oxidation reaction, which is much higher than that of isolated cluster components. This work connects the cluster topologies and cluster-cation pairs to the superstructures of cluster assemblies, providing general guidelines for the supramolecular self-assembly of POM clusters.
- 10 October 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (42) , 28874-28884
Cluster-Cation Pairs Mediated Assembly of Subnanometer Polyoxometalates Superstructures
Superstructures assembled by subnanometer polyoxometalate (POM) clusters are interesting for their attractive structures and excellent properties. However, the complex interactions between clusters and cations make it challenging to control the assembly of POM clusters at the subnanometer scale. Here, 20 cluster-assembled superstructures built by two types of MP2W17O61 (M = La-Lu) clusters are successfully synthesized. The precise structures and configurations of the subnanostructures, including nanowires, tetragonal nanosheets, and rectangular nanosheets, are characterized and presented. Molecular dynamics (MD) simulations reveal that the difference in interactions of POM clusters and cations leads to the formation of distinct superstructures. Two mechanisms of superstructure formation are proposed. Furthermore, the EuP2W17 nanosheet behaves with a high Faradaic efficiency of 90.2% and selectivity of 87.3% for glycolic acid in the electrocatalytic ethylene glycol oxidation reaction, which is much higher than that of isolated cluster components. This work connects the cluster topologies and cluster-cation pairs to the superstructures of cluster assemblies, providing general guidelines for the supramolecular self-assembly of POM clusters.
- Top Cited Papers
- 10 April 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (42)
Inspiration of Bimetallic Peroxide for Controllable Electrooxidizing Ethylene Glycol Through Modulating Surficial Intermediates
Biomass feedstock ethylene glycol (EG) can be anodically oxidized to the high‐value glycolic acid (GA), which is widely considered as one critical raw material of biodegradable plastics. Developing low‐cost electrocatalyst to economically produce GA with high selectivity still meeting challenges. Herein, a non‐precious Co‐Ni bimetal catalysts are developed for controllable electrooxidizing EG to GA (EGOR). Through regulating the generation of key intermediate (CH 2 OH‐CO * ) on the low‐cost catalyst surface, a successive electrooxidation from EG to GA has been achieved with high selective (96.3%) and conversion rate (>85%) at current density of 150 mA cm −2 , which is on par with the reported precious metal catalysts. Through coupling with hydrogen evolution reaction (EGOR‐HER), 2.759 mmol H 2 and 7.48 mmol of GA are generated at 80 mA cm −2 , which also can save 27% energy comparing with a water splitting system. The synergistic effect between Co and Ni in the bimetallic catalyst has been exploited: high‐valent CoOOH sites catalyzed the generation of CH 2 OH‐CO * and reduce the energy barrier during GA formation; Whereas, Ni sites can effectively facilitate the formation of CoOOH and improve the adsorption of EG.
- 10 April 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (42)
Top Cited PapersInspiration of Bimetallic Peroxide for Controllable Electrooxidizing Ethylene Glycol Through Modulating Surficial Intermediates
Biomass feedstock ethylene glycol (EG) can be anodically oxidized to the high‐value glycolic acid (GA), which is widely considered as one critical raw material of biodegradable plastics. Developing low‐cost electrocatalyst to economically produce GA with high selectivity still meeting challenges. Herein, a non‐precious Co‐Ni bimetal catalysts are developed for controllable electrooxidizing EG to GA (EGOR). Through regulating the generation of key intermediate (CH 2 OH‐CO * ) on the low‐cost catalyst surface, a successive electrooxidation from EG to GA has been achieved with high selective (96.3%) and conversion rate (>85%) at current density of 150 mA cm −2 , which is on par with the reported precious metal catalysts. Through coupling with hydrogen evolution reaction (EGOR‐HER), 2.759 mmol H 2 and 7.48 mmol of GA are generated at 80 mA cm −2 , which also can save 27% energy comparing with a water splitting system. The synergistic effect between Co and Ni in the bimetallic catalyst has been exploited: high‐valent CoOOH sites catalyzed the generation of CH 2 OH‐CO * and reduce the energy barrier during GA formation; Whereas, Ni sites can effectively facilitate the formation of CoOOH and improve the adsorption of EG.