Han Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Han Liu has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Niloy J. Mitra
University College London
5 shared publicationsJulie Dorsey
Yale University
2 shared publications- Sawsan AlHalawani
KAUST
2 shared publications - Yong-Liang Yang
University of Bath
2 shared publications Youyi Zheng
ShanghaiTech University
2 shared publicationsDamien Rohmer
INRIA Grenoble
1 shared publication
Latest Publications
- 1 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Visualization and Computer Graphics
- Vol. 28 (4) , 1758-1772
FAME: 3D Shape Generation via Functionality-Aware Model Evolution
We introduce a modeling tool which can evolve a set of 3D objects in a functionality-aware manner. Our goal is for the evolution to generate large and diverse sets of plausible 3D objects for data augmentation, constrained modeling, as well as open-ended exploration to possibly inspire new designs. Starting with an initial population of 3D objects belonging to one or more functional categories, we evolve the shapes through part recombination to produce generations of hybrids or crossbreeds between parents from the heterogeneous shape collection. Evolutionary selection of offsprings is guided both by a functional plausibility score derived from functionality analysis of shapes in the initial population and user preference, as in a design gallery. Since cross-category hybridization may result in offsprings not belonging to any of the known functional categories, we develop a means for functionality partial matching to evaluate functional plausibility on partial shapes. We show a variety of plausible hybrid shapes generated by our functionality-aware model evolution, which can complement existing datasets as training data and boost the performance of contemporary data-driven segmentation schemes, especially in challenging cases. Our tool supports constrained modeling, allowing users to restrict or steer the model evolution with functionality labels. At the same time, unexpected yet functional object prototypes can emerge during open-ended exploration owing to structure breaking when evolving a heterogeneous collection.
- 1 April 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Visualization and Computer Graphics
- Vol. 28 (4) , 1758-1772
FAME: 3D Shape Generation via Functionality-Aware Model Evolution
We introduce a modeling tool which can evolve a set of 3D objects in a functionality-aware manner. Our goal is for the evolution to generate large and diverse sets of plausible 3D objects for data augmentation, constrained modeling, as well as open-ended exploration to possibly inspire new designs. Starting with an initial population of 3D objects belonging to one or more functional categories, we evolve the shapes through part recombination to produce generations of hybrids or crossbreeds between parents from the heterogeneous shape collection. Evolutionary selection of offsprings is guided both by a functional plausibility score derived from functionality analysis of shapes in the initial population and user preference, as in a design gallery. Since cross-category hybridization may result in offsprings not belonging to any of the known functional categories, we develop a means for functionality partial matching to evaluate functional plausibility on partial shapes. We show a variety of plausible hybrid shapes generated by our functionality-aware model evolution, which can complement existing datasets as training data and boost the performance of contemporary data-driven segmentation schemes, especially in challenging cases. Our tool supports constrained modeling, allowing users to restrict or steer the model evolution with functionality labels. At the same time, unexpected yet functional object prototypes can emerge during open-ended exploration owing to structure breaking when evolving a heterogeneous collection.
- 27 September 2021
- Published by Springer Nature
- p. 404-412
Analysis of Key Technologies of Cloud Computing Security Based on Trust Model
- 27 September 2021
- Published by Springer Nature
- p. 404-412
Analysis of Key Technologies of Cloud Computing Security Based on Trust Model
- Open Access
- 25 February 2017
- Published by Association for Computing Machinery (ACM)
- p. 1-11
How2Sketch
Accurately drawing 3D objects is difficult for untrained individuals, as it requires an understanding of perspective and its effects on geometry and proportions. Step-by-step tutorials break the complex task of sketching an entire object down into easy-to-follow steps that even a novice can follow. However, creating such tutorials requires expert knowledge and is time-consuming. As a result, the availability of tutorials for a given object or viewpoint is limited. How2Sketch (H2S) addresses this problem by automatically generating easy-to-follow tutorials for arbitrary 3D objects. Given a segmented 3D model and a camera viewpoint, H2S computes a sequence of steps for constructing a drawing scaffold comprised of geometric primitives, which helps the user draw the final contours in correct perspective and proportion. To make the drawing scaffold easy to construct, the algorithm solves for an ordering among the scaffolding primitives and explicitly makes small geometric modifications to the size and location of the object parts to simplify relative positioning. Technically, we formulate this scaffold construction as a single selection problem that simultaneously solves for the ordering and geometric changes of the primitives. We generate different tutorials on man-made objects using our method and evaluate how easily the tutorials can be followed with a user study.
- 25 February 2017
- Published by Association for Computing Machinery (ACM)
- p. 1-11
Open AccessHow2Sketch
Accurately drawing 3D objects is difficult for untrained individuals, as it requires an understanding of perspective and its effects on geometry and proportions. Step-by-step tutorials break the complex task of sketching an entire object down into easy-to-follow steps that even a novice can follow. However, creating such tutorials requires expert knowledge and is time-consuming. As a result, the availability of tutorials for a given object or viewpoint is limited. How2Sketch (H2S) addresses this problem by automatically generating easy-to-follow tutorials for arbitrary 3D objects. Given a segmented 3D model and a camera viewpoint, H2S computes a sequence of steps for constructing a drawing scaffold comprised of geometric primitives, which helps the user draw the final contours in correct perspective and proportion. To make the drawing scaffold easy to construct, the algorithm solves for an ordering among the scaffolding primitives and explicitly makes small geometric modifications to the size and location of the object parts to simplify relative positioning. Technically, we formulate this scaffold construction as a single selection problem that simultaneously solves for the ordering and geometric changes of the primitives. We generate different tutorials on man-made objects using our method and evaluate how easily the tutorials can be followed with a user study.
- 27 May 2016
- Published by Wiley in Computer Graphics Forum
- Vol. 35 (2) , 37-48
SmartCanvas: Context‐inferred Interpretation of Sketches for Preparatory Design Studies
In early or preparatory design stages, an architect or designer sketches out rough ideas, not only about the object or structure being considered, but its relation to its spatial context. This is an iterative process, where the sketches are not only the primary means for testing and refining ideas, but also for communicating among a design team and to clients. Hence, sketching is the preferred media for artists and designers during the early stages of design, albeit with a major drawback: sketches are 2D and effects such as view perturbations or object movement are not supported, thereby inhibiting the design process. We present an interactive system that allows for the creation of a 3D abstraction of a designed space, built primarily by sketching in 2D within the context of an anchoring design or photograph. The system is progressive in the sense that the interpretations are refined as the user continues sketching. As a key technical enabler, we reformulate the sketch interpretation process as a selection optimization from a set of context‐generated canvas planes in order to retrieve a regular arrangement of planes. We demonstrate our system (available at http:/geometry.cs.ucl.ac.uk/projects/2016/smartcanvas/) with a wide range of sketches and design studies.
- 27 May 2016
- Published by Wiley in Computer Graphics Forum
- Vol. 35 (2) , 37-48
SmartCanvas: Context‐inferred Interpretation of Sketches for Preparatory Design Studies
In early or preparatory design stages, an architect or designer sketches out rough ideas, not only about the object or structure being considered, but its relation to its spatial context. This is an iterative process, where the sketches are not only the primary means for testing and refining ideas, but also for communicating among a design team and to clients. Hence, sketching is the preferred media for artists and designers during the early stages of design, albeit with a major drawback: sketches are 2D and effects such as view perturbations or object movement are not supported, thereby inhibiting the design process. We present an interactive system that allows for the creation of a 3D abstraction of a designed space, built primarily by sketching in 2D within the context of an anchoring design or photograph. The system is progressive in the sense that the interpretations are refined as the user continues sketching. As a key technical enabler, we reformulate the sketch interpretation process as a selection optimization from a set of context‐generated canvas planes in order to retrieve a regular arrangement of planes. We demonstrate our system (available at http:/geometry.cs.ucl.ac.uk/projects/2016/smartcanvas/) with a wide range of sketches and design studies.
- 22 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Visualization and Computer Graphics
- Vol. 22 (6) , 1732-1744
Ergonomics-Inspired Reshaping and Exploration of Collections of Models
This paper examines the following question: given a collection of man-made shapes, e.g., chairs, can we effectively explore and rank the shapes with respect to a given human body-in terms of how well a candidate shape fits the specified human body? Answering this question requires identifying which shapes are more suitable for a prescribed body, and how to alter the input geometry to better fit the shapes to a given human body. The problem links physical proportions of the human body and its interaction with object geometry, which is often expressed as ergonomics guidelines. We present an interactive system that allows users to explore shapes using different avatar poses, while, at the same time providing interactive previews of how to alter the shapes to fit the user-specified body and pose. We achieve this by first constructing a fuzzy shape-to-body map from the ergonomic guidelines to multi-contacts geometric constraints; and then, proposing a novel contact-preserving deformation paradigm to realize a reshaping to adapt the input shape. We evaluate our method on collections of models from different categories and validate the results through a user study.
- 22 June 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Visualization and Computer Graphics
- Vol. 22 (6) , 1732-1744
Ergonomics-Inspired Reshaping and Exploration of Collections of Models
This paper examines the following question: given a collection of man-made shapes, e.g., chairs, can we effectively explore and rank the shapes with respect to a given human body-in terms of how well a candidate shape fits the specified human body? Answering this question requires identifying which shapes are more suitable for a prescribed body, and how to alter the input geometry to better fit the shapes to a given human body. The problem links physical proportions of the human body and its interaction with object geometry, which is often expressed as ergonomics guidelines. We present an interactive system that allows users to explore shapes using different avatar poses, while, at the same time providing interactive previews of how to alter the shapes to fit the user-specified body and pose. We achieve this by first constructing a fuzzy shape-to-body map from the ergonomic guidelines to multi-contacts geometric constraints; and then, proposing a novel contact-preserving deformation paradigm to realize a reshaping to adapt the input shape. We evaluate our method on collections of models from different categories and validate the results through a user study.
- 1 May 2015
- Published by Wiley in Computer Graphics Forum
- Vol. 34 (2) , 503-513
Replaceable Substructures for Efficient Part‐Based Modeling
A popular mode of shape synthesis involves mixing and matching parts from different objects to form a coherent whole. The key challenge is to efficiently synthesize shape variations that are plausible, both locally and globally. A major obstacle is to assemble the objects with local consistency, i.e., all the connections between parts are valid with no dangling open connections. The combinatorial complexity of this problem limits existing methods in geometric and/or topological variations of the synthesized models. In this work, we introducereplaceable substructuresas arrangements of parts that can be interchanged while ensuring boundary consistency. The consistency information is extracted from part labels and connections in the original source models. We present a polynomial time algorithm that discovers such substructures by working on a dual of the original shape graph that encodes inter‐part connectivity. We demonstrate the algorithm on a range of test examples producing plausible shape variations, both from a geometric and from a topological viewpoint.
- 1 May 2015
- Published by Wiley in Computer Graphics Forum
- Vol. 34 (2) , 503-513
Replaceable Substructures for Efficient Part‐Based Modeling
A popular mode of shape synthesis involves mixing and matching parts from different objects to form a coherent whole. The key challenge is to efficiently synthesize shape variations that are plausible, both locally and globally. A major obstacle is to assemble the objects with local consistency, i.e., all the connections between parts are valid with no dangling open connections. The combinatorial complexity of this problem limits existing methods in geometric and/or topological variations of the synthesized models. In this work, we introducereplaceable substructuresas arrangements of parts that can be interchanged while ensuring boundary consistency. The consistency information is extracted from part labels and connections in the original source models. We present a polynomial time algorithm that discovers such substructures by working on a dual of the original shape graph that encodes inter‐part connectivity. We demonstrate the algorithm on a range of test examples producing plausible shape variations, both from a geometric and from a topological viewpoint.
- 6 May 2013
- Published by Wiley in Computer Graphics Forum
- Vol. 32 (2pt2) , 215-224
Interactive Facades Analysis and Synthesis of Semi‐Regular Facades
- 6 May 2013
- Published by Wiley in Computer Graphics Forum
- Vol. 32 (2pt2) , 215-224
Interactive Facades Analysis and Synthesis of Semi‐Regular Facades
- 3 May 2013
- Published by Springer Nature in The Visual Computer
- Vol. 29 (6-8) , 663-673
Constraint-aware interior layout exploration for pre-cast concrete-based buildings
- 3 May 2013
- Published by Springer Nature in The Visual Computer
- Vol. 29 (6-8) , 663-673
Constraint-aware interior layout exploration for pre-cast concrete-based buildings