Konstantina Georgouli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Konstantina Georgouli has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Christina Plati
National Technical University of Athens
8 shared publications - Andreas Loizos
Laboratory of Pavement Engineering, National Technical University of Athens (NTUA), 15772 Athens, Greece
7 shared publications Andreas Loizos
3 shared publicationsChristina Plati
3 shared publications
Latest Publications
- Open Access
- 2 April 2026
- Published by MDPI AG in Infrastructures
- Vol. 11 (4) , 127
Impact of Dynamic Modulus Prediction Errors on Rutting Estimates in Sustainable Flexible Pavements
Permanent deformation, manifested as rutting, remains one of the most critical threats to the structural integrity and functional performance of flexible pavements. The Mechanistic–Empirical Pavement Design Guide (MEPDG) includes rutting models that are highly sensitive to the dynamic modulus (E*) of asphalt mixtures—a parameter that can be determined experimentally or predicted by analytical models. In this study, the influence of E* prediction error on rutting estimation is systematically evaluated by comparing laboratory-measured E* values with those predicted by two models: NCHRP 1-37A and a locally calibrated model. The dynamic pavement behavior and rut depth predictions were determined using the finite layer program 3D-Move under standard traffic loads. Comparative analysis revealed that the NCHRP 1-37A model tends to underestimate E*, leading to significant overestimation of vertical strains and accumulated permanent deformation. In contrast, the locally calibrated model provided predictions that closely matched the laboratory measurements, resulting in minimal deviation in rut depth estimates. The results highlight the importance of local calibration and model selection to improve the reliability of mechanistic–empirical pavement predictions, enabling smarter pavement performance evaluation and supporting more sustainable pavement management practices, especially when laboratory testing is not feasible.
- 2 April 2026
- Published by MDPI AG in Infrastructures
- Vol. 11 (4) , 127
Open AccessImpact of Dynamic Modulus Prediction Errors on Rutting Estimates in Sustainable Flexible Pavements
Permanent deformation, manifested as rutting, remains one of the most critical threats to the structural integrity and functional performance of flexible pavements. The Mechanistic–Empirical Pavement Design Guide (MEPDG) includes rutting models that are highly sensitive to the dynamic modulus (E*) of asphalt mixtures—a parameter that can be determined experimentally or predicted by analytical models. In this study, the influence of E* prediction error on rutting estimation is systematically evaluated by comparing laboratory-measured E* values with those predicted by two models: NCHRP 1-37A and a locally calibrated model. The dynamic pavement behavior and rut depth predictions were determined using the finite layer program 3D-Move under standard traffic loads. Comparative analysis revealed that the NCHRP 1-37A model tends to underestimate E*, leading to significant overestimation of vertical strains and accumulated permanent deformation. In contrast, the locally calibrated model provided predictions that closely matched the laboratory measurements, resulting in minimal deviation in rut depth estimates. The results highlight the importance of local calibration and model selection to improve the reliability of mechanistic–empirical pavement predictions, enabling smarter pavement performance evaluation and supporting more sustainable pavement management practices, especially when laboratory testing is not feasible.
- Open Access
- 27 February 2026
- Published by MDPI AG in Preprints.org
Impact of Dynamic Modulus Prediction Errors on Rutting Estimates in Sustainable Flexible Pavements
Permanent deformation, manifested as rutting, remains one of the most critical threats to the structural integrity and functional performance of flexible pavements. The Mechanistic-Empirical Pavement Design Guide (MEPDG) includes rutting models that are highly sensitive to the dynamic modulus (E*) of asphalt mixtures – a parameter that can be determined experimentally or predicted by analytical models. In this study, the influence of E* prediction error on rutting estimation is systematically evaluated by comparing laboratory-measured E* values with those predicted by two models: NCHRP 1-37A and a locally calibrated model. The dynamic pavement behavior and rut depth predictions were determined using the finite layer program 3D-Move under standard traffic loads. Comparative analysis revealed that the NCHRP 1-37A model tends to underestimate E*, leading to significant overestimation of vertical strains and accumulated permanent deformation. In contrast, the locally calibrated model provided predictions that closely matched the laboratory measurements, resulting in minimal deviation in rut depth estimates. The results highlight the importance of local calibration and model selection to improve the reliability of mechanistic-empirical pavement predictions, enabling smarter pavement performance evaluation and supporting more sustainable pavement management practices, especially when laboratory testing is not feasible.
- 27 February 2026
- Published by MDPI AG in Preprints.org
Open AccessImpact of Dynamic Modulus Prediction Errors on Rutting Estimates in Sustainable Flexible Pavements
Permanent deformation, manifested as rutting, remains one of the most critical threats to the structural integrity and functional performance of flexible pavements. The Mechanistic-Empirical Pavement Design Guide (MEPDG) includes rutting models that are highly sensitive to the dynamic modulus (E*) of asphalt mixtures – a parameter that can be determined experimentally or predicted by analytical models. In this study, the influence of E* prediction error on rutting estimation is systematically evaluated by comparing laboratory-measured E* values with those predicted by two models: NCHRP 1-37A and a locally calibrated model. The dynamic pavement behavior and rut depth predictions were determined using the finite layer program 3D-Move under standard traffic loads. Comparative analysis revealed that the NCHRP 1-37A model tends to underestimate E*, leading to significant overestimation of vertical strains and accumulated permanent deformation. In contrast, the locally calibrated model provided predictions that closely matched the laboratory measurements, resulting in minimal deviation in rut depth estimates. The results highlight the importance of local calibration and model selection to improve the reliability of mechanistic-empirical pavement predictions, enabling smarter pavement performance evaluation and supporting more sustainable pavement management practices, especially when laboratory testing is not feasible.
- Open Access
- 26 June 2025
- Published by MDPI AG in Construction Materials
- Vol. 5 (3) , 43
Dielectric-Based Estimation of HMA Dynamic Modulus
This research aims to investigate the possibility of measuring dielectric constant as an alternative proxy for estimating E* through a non-destructive procedure. An experimental program was conducted on dense-graded (DG) and open-graded (OG) asphalt mixtures, where variable asphalt contents and compaction levels were controlled to achieve different air voids. The measurements of dielectric constant were performed with a Percometer, and E* values were obtained using standard laboratory tests. For DG mixtures, a clear correlation was observed between dielectric constant, air void content and effective binder ratio. The less consistent relationships for OG mixtures were likely due to the more heterogeneous structure of the OG mixtures, the conductive slag aggregates and a limited dataset. Using dielectric values, two predictive models were developed (DIME_DG and DIME_OG), with the former showing higher reliability. Verification with independent specimens confirmed model robustness. This dielectric-based approach offers a practical, cost-effective alternative to traditional modulus testing. The key innovation of this study is the integration of the asphalt mix dielectric constant into established dynamic modulus predictive models, offering a novel approach that enhances the sensitivity of these models to mixture-specific characteristics beyond traditional volumetric and binder properties.
- 26 June 2025
- Published by MDPI AG in Construction Materials
- Vol. 5 (3) , 43
Open AccessDielectric-Based Estimation of HMA Dynamic Modulus
This research aims to investigate the possibility of measuring dielectric constant as an alternative proxy for estimating E* through a non-destructive procedure. An experimental program was conducted on dense-graded (DG) and open-graded (OG) asphalt mixtures, where variable asphalt contents and compaction levels were controlled to achieve different air voids. The measurements of dielectric constant were performed with a Percometer, and E* values were obtained using standard laboratory tests. For DG mixtures, a clear correlation was observed between dielectric constant, air void content and effective binder ratio. The less consistent relationships for OG mixtures were likely due to the more heterogeneous structure of the OG mixtures, the conductive slag aggregates and a limited dataset. Using dielectric values, two predictive models were developed (DIME_DG and DIME_OG), with the former showing higher reliability. Verification with independent specimens confirmed model robustness. This dielectric-based approach offers a practical, cost-effective alternative to traditional modulus testing. The key innovation of this study is the integration of the asphalt mix dielectric constant into established dynamic modulus predictive models, offering a novel approach that enhances the sensitivity of these models to mixture-specific characteristics beyond traditional volumetric and binder properties.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Integration of NDT data for the development of in-situ asphalt dynamic modulus master curve
In recent years, a growing trend has emerged towards sustainable pavement infrastructure. Six key pavement life-cycle phases are considered for sustainability best practices: materials, production, design, construction, use, preservation / maintenance / rehabilitation, end of life. As much of the road network is completed, road authorities are focused on ensuring and/or extending the original intended life of the pavements through maintenance or rehabilitation measures. Pavement preservation is inherently a sustainable activity. It often employs low-cost, low-environmental- impact treatments to prolong the life of the pavement by delaying major rehabilitation activities. However, any form of pavement treatment should be done at an early stage of deterioration and should be limited to the asphalt layers. In this way, pavement life will be continuously extended, which is the desired outcome since pavements, as an integral part of the transportation network, function virtually forever (long-life pavements). Therefore, it is important to timely assess the structural condition of the pavement so that road authorities can plan and implement proactive strategies.The structural condition depends on the structural properties of the pavement and the mechanical properties of the mixtures of the layers. In flexible pavements, the asphalt layers are the most important structural element of the pavement, as they are in direct contact with traffic loads and play the most important role in transmitting stresses to the underlying layers and especially to the subgrade. For this reason, the mechanical properties of the asphalt mix and, in particular, the stiffness modulus are an important factor that determines to a large extent not only the performance of the asphalt layers but also of the pavement. On this basis, the viscoelastic behavior of the asphalt mix can be described by the master curve of the dynamic modulus (E*).The Mechanistic-Empirical Pavement Design Guide (MEPDG) proposes a practical method that involves the development of an E* master curve that is reliable for field conditions and is based on field Non-Destructive Testing (NDT) data and an algorithm for estimating E*. The present work deals with the implementation of the methodology developed within the MEPDG for the determination of the E* field master curve. The objective is to evaluate the individual steps, to identify possible weaknesses and to make suggestions on how to overcome them, and finally to make a statement on the accuracy of the methodology in terms of performance characteristics (fatigue cracking and rutting in the asphalt layer). For this purpose, an experimental study was conducted, which included two stages: (1) in-situ acquisition of FWD and GPR data and coring, (2) laboratory testing of the cores taken. The performance indices for fatigue cracking and rutting were used for validation. The results show that, under certain conditions, the methodology is sound and can provide accurate results for the E* field. As such, in the frame of preventive maintenance, the accurate assessment of the structural condition of in-service pavements provides road authorities the ability of planning the necessary activities to improve the structural condition at the right time before its rapid deterioration.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessIntegration of NDT data for the development of in-situ asphalt dynamic modulus master curve
In recent years, a growing trend has emerged towards sustainable pavement infrastructure. Six key pavement life-cycle phases are considered for sustainability best practices: materials, production, design, construction, use, preservation / maintenance / rehabilitation, end of life. As much of the road network is completed, road authorities are focused on ensuring and/or extending the original intended life of the pavements through maintenance or rehabilitation measures. Pavement preservation is inherently a sustainable activity. It often employs low-cost, low-environmental- impact treatments to prolong the life of the pavement by delaying major rehabilitation activities. However, any form of pavement treatment should be done at an early stage of deterioration and should be limited to the asphalt layers. In this way, pavement life will be continuously extended, which is the desired outcome since pavements, as an integral part of the transportation network, function virtually forever (long-life pavements). Therefore, it is important to timely assess the structural condition of the pavement so that road authorities can plan and implement proactive strategies.The structural condition depends on the structural properties of the pavement and the mechanical properties of the mixtures of the layers. In flexible pavements, the asphalt layers are the most important structural element of the pavement, as they are in direct contact with traffic loads and play the most important role in transmitting stresses to the underlying layers and especially to the subgrade. For this reason, the mechanical properties of the asphalt mix and, in particular, the stiffness modulus are an important factor that determines to a large extent not only the performance of the asphalt layers but also of the pavement. On this basis, the viscoelastic behavior of the asphalt mix can be described by the master curve of the dynamic modulus (E*).The Mechanistic-Empirical Pavement Design Guide (MEPDG) proposes a practical method that involves the development of an E* master curve that is reliable for field conditions and is based on field Non-Destructive Testing (NDT) data and an algorithm for estimating E*. The present work deals with the implementation of the methodology developed within the MEPDG for the determination of the E* field master curve. The objective is to evaluate the individual steps, to identify possible weaknesses and to make suggestions on how to overcome them, and finally to make a statement on the accuracy of the methodology in terms of performance characteristics (fatigue cracking and rutting in the asphalt layer). For this purpose, an experimental study was conducted, which included two stages: (1) in-situ acquisition of FWD and GPR data and coring, (2) laboratory testing of the cores taken. The performance indices for fatigue cracking and rutting were used for validation. The results show that, under certain conditions, the methodology is sound and can provide accurate results for the E* field. As such, in the frame of preventive maintenance, the accurate assessment of the structural condition of in-service pavements provides road authorities the ability of planning the necessary activities to improve the structural condition at the right time before its rapid deterioration.
- Open Access
Evaluation of a Comprehensive Approach for the Development of the Field E* Master Curve Using NDT Data
Non-destructive testing (NDT) systems are essential tools and are widely used for assessing the condition and structural integrity of pavement structures without causing any damage. They are cost-effective, provide comprehensive data, and are time efficient. The bearing capacity and structural condition of a flexible pavement depends on several interrelated factors, with asphalt layers stiffness being dominant. Since asphalt mix is a viscoelastic material, its performance can be fully captured by the dynamic modulus master curve. However, in terms of evaluating an in-service pavement, although a dynamic load is applied and the time history of deflections is recorded during testing of FWD, only the peak deflection is considered in the analysis. Therefore, the modulus of stiffness estimated by backcalculation is the modulus of elasticity. While several methods have been introduced for the determination of the field dynamic modulus master curve, the MEPDG approach provides significant advantages in terms of transparency and robustness. This study focuses on evaluating the methodology’s accuracy through an experimental study. The data analysis and validation process showed that routine measurements with the FWD and GPR, within the framework of a pavement monitoring system, can provide valuable input parameters for the evaluation of in-service pavements.
Open AccessEvaluation of a Comprehensive Approach for the Development of the Field E* Master Curve Using NDT Data
Non-destructive testing (NDT) systems are essential tools and are widely used for assessing the condition and structural integrity of pavement structures without causing any damage. They are cost-effective, provide comprehensive data, and are time efficient. The bearing capacity and structural condition of a flexible pavement depends on several interrelated factors, with asphalt layers stiffness being dominant. Since asphalt mix is a viscoelastic material, its performance can be fully captured by the dynamic modulus master curve. However, in terms of evaluating an in-service pavement, although a dynamic load is applied and the time history of deflections is recorded during testing of FWD, only the peak deflection is considered in the analysis. Therefore, the modulus of stiffness estimated by backcalculation is the modulus of elasticity. While several methods have been introduced for the determination of the field dynamic modulus master curve, the MEPDG approach provides significant advantages in terms of transparency and robustness. This study focuses on evaluating the methodology’s accuracy through an experimental study. The data analysis and validation process showed that routine measurements with the FWD and GPR, within the framework of a pavement monitoring system, can provide valuable input parameters for the evaluation of in-service pavements.
- Open Access
- 2 September 2024
- Published by MDPI AG in Construction Materials
- Vol. 4 (3) , 566-580
Dielectric Response of Asphalt Mixtures and Relationship to Air Voids and Stiffness
Asphalt mix air void content is a dominant parameter for asphalt mix design. The air void content of the mix affects the mechanical property of stiffness, while both characterize compacted asphalt mix materials. On the other hand, asphalt mix as a composite material can be characterized by its dielectric value. Considering the above, the aim of the present paper is to develop a simple methodology for the characterization of asphalt mix materials using their dielectric properties through an investigation of the interaction of dielectrics and air voids, as well as air voids and stiffness. For this purpose, an experimental laboratory study was conducted, which involved the compaction of asphalt mixes with different aggregate types and air void content. Upon this, the specimens were tested for their air void content, the dielectric constant, and the stiffness modulus. The analysis of the results showed strong correlations between the three characteristics. These findings were further verified with a new set of specimens and laboratory measurements. The final goal is to use the developed methodology for the estimation of asphalt mix stiffness considering that the effect of air content on the resulting stiffness cause indirect relationships between stiffness and dielectrics.
- 2 September 2024
- Published by MDPI AG in Construction Materials
- Vol. 4 (3) , 566-580
Open AccessDielectric Response of Asphalt Mixtures and Relationship to Air Voids and Stiffness
Asphalt mix air void content is a dominant parameter for asphalt mix design. The air void content of the mix affects the mechanical property of stiffness, while both characterize compacted asphalt mix materials. On the other hand, asphalt mix as a composite material can be characterized by its dielectric value. Considering the above, the aim of the present paper is to develop a simple methodology for the characterization of asphalt mix materials using their dielectric properties through an investigation of the interaction of dielectrics and air voids, as well as air voids and stiffness. For this purpose, an experimental laboratory study was conducted, which involved the compaction of asphalt mixes with different aggregate types and air void content. Upon this, the specimens were tested for their air void content, the dielectric constant, and the stiffness modulus. The analysis of the results showed strong correlations between the three characteristics. These findings were further verified with a new set of specimens and laboratory measurements. The final goal is to use the developed methodology for the estimation of asphalt mix stiffness considering that the effect of air content on the resulting stiffness cause indirect relationships between stiffness and dielectrics.
- Open Access
- 8 June 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (12) , 3011
Using NDT Data to Assess the Effect of Pavement Thickness Variability on Ride Quality
Pavement condition largely determines its long-term behavior and is of paramount importance for rehabilitation and maintenance management. The use of non-destructive testing (NDT) systems to assess pavement condition has gained much popularity. Often, well-known NDT systems are combined to take full advantage of the capabilities of each system. Combining independent NDT systems to optimize the assessment process is a scientific challenge. With this in mind, the purpose of this paper is to investigate the extent to which data from two independent NDT systems can be combined: pavement thickness obtained with ground penetrating radar (GPR) and roughness data obtained with a road surface profiler (RSP). In particular, the objective of this study is to determine whether the expected variations in asphalt layer thickness, due to the construction process and the different pavement cross sections along the same road/highway road, may have an impact on pavement roughness as expressed in International Roughness Index (IRI) values. GPR and roughness data are collected, processed, and analyzed. The analysis results show that thickness variations are reflected in pavement roughness. The greater the variation in asphalt layer thickness, the greater the IRI values. Furthermore, it is argued that the GPR capabilities can be used for an initial assessment of the expected pavement quality.
- 8 June 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (12) , 3011
Open AccessUsing NDT Data to Assess the Effect of Pavement Thickness Variability on Ride Quality
Pavement condition largely determines its long-term behavior and is of paramount importance for rehabilitation and maintenance management. The use of non-destructive testing (NDT) systems to assess pavement condition has gained much popularity. Often, well-known NDT systems are combined to take full advantage of the capabilities of each system. Combining independent NDT systems to optimize the assessment process is a scientific challenge. With this in mind, the purpose of this paper is to investigate the extent to which data from two independent NDT systems can be combined: pavement thickness obtained with ground penetrating radar (GPR) and roughness data obtained with a road surface profiler (RSP). In particular, the objective of this study is to determine whether the expected variations in asphalt layer thickness, due to the construction process and the different pavement cross sections along the same road/highway road, may have an impact on pavement roughness as expressed in International Roughness Index (IRI) values. GPR and roughness data are collected, processed, and analyzed. The analysis results show that thickness variations are reflected in pavement roughness. The greater the variation in asphalt layer thickness, the greater the IRI values. Furthermore, it is argued that the GPR capabilities can be used for an initial assessment of the expected pavement quality.
- 5 March 2022
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 24 (2)
Autonomous trucks’ (ATs) lateral distribution and asphalt pavement performance
Recent research studies have provided useful insights into the impact of the Autonomous Trucks ’s (AT) wheel wander on pavement performance. However, only a single road structure, asphalt mix stiffness and asphalt mix thickness are considered in these studies. With these in mind, the present study aims to extend previous limited research results and present a more comprehensive insight into the relationship between AT wandering and the performance of flexible pavement asphalt layers with different thicknesses and asphalt stiffness. For the investigation, a pavement analysis was done on flexible pavement cross-sections with variations in the base and subgrade mechanical characteristics. In addition, for each cross-section the HMA thickness and stiffness varied. The ATs’ lateral position was modelled by four distinct distribution patterns: the zero, normal, uniform and Laplace . A static and dynamic pavement analysis was performed with the Mechanistic Empirical Pavement Design Guide (MEPDG) to determine pavement performance in terms of fatigue cracking and rutting of the asphalt layer. Analysis results showed that the zero lateral distribution of ATs hurts pavement performance. On the other hand, when ATs wheel paths are distributed uniformly in the lateral direction within the lane, the accumulated damage is significantly reduced.
- 5 March 2022
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 24 (2)
Autonomous trucks’ (ATs) lateral distribution and asphalt pavement performance
Recent research studies have provided useful insights into the impact of the Autonomous Trucks ’s (AT) wheel wander on pavement performance. However, only a single road structure, asphalt mix stiffness and asphalt mix thickness are considered in these studies. With these in mind, the present study aims to extend previous limited research results and present a more comprehensive insight into the relationship between AT wandering and the performance of flexible pavement asphalt layers with different thicknesses and asphalt stiffness. For the investigation, a pavement analysis was done on flexible pavement cross-sections with variations in the base and subgrade mechanical characteristics. In addition, for each cross-section the HMA thickness and stiffness varied. The ATs’ lateral position was modelled by four distinct distribution patterns: the zero, normal, uniform and Laplace . A static and dynamic pavement analysis was performed with the Mechanistic Empirical Pavement Design Guide (MEPDG) to determine pavement performance in terms of fatigue cracking and rutting of the asphalt layer. Analysis results showed that the zero lateral distribution of ATs hurts pavement performance. On the other hand, when ATs wheel paths are distributed uniformly in the lateral direction within the lane, the accumulated damage is significantly reduced.
- 26 September 2021
- Published by Springer Nature
- p. 1807-1813
The Impact of Binder Type on Pavement Design: A Comparative Study
- 26 September 2021
- Published by Springer Nature
- p. 1807-1813
The Impact of Binder Type on Pavement Design: A Comparative Study
- Open Access
- 1 June 2021
- Published by Elsevier in Journal of Traffic and Transportation Engineering (English Edition)
- Vol. 8 (3) , 388-398
Autonomous vehicles wheel wander: Structural impact on flexible pavements
- 1 June 2021
- Published by Elsevier in Journal of Traffic and Transportation Engineering (English Edition)
- Vol. 8 (3) , 388-398
Open AccessAutonomous vehicles wheel wander: Structural impact on flexible pavements