Zahra Pezeshki
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zahra Pezeshki has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
Ahmad Darabi
Shahrood University of Technology,Faculty of Electrical Engineering and Robotic,Shahrood,Iran
4 shared publicationsSayyed Majid Mazinani
Faculty of Engineering, Imam Reza International University, Mashhad, Iran
4 shared publicationsAli Soleimani
Shahrood University of Technology,Faculty of Electrical Engineering and Robotic,Shahrood,Iran
3 shared publicationsEugene Krinitsky
3 shared publicationsMashallah Rezakazemi
3 shared publicationsA. Darabi
2 shared publications
Latest Publications
- Open Access
- 7 July 2026
- Published by Springer Nature in Carbon Neutral Systems
- Vol. 2 (1) , 11
Performance analysis of the microgrid-scale hydrogen energy storage in Russia
Solar systems are very suitable systems as an alternative energy resource around the world because these systems, especially in remote areas where there is no access to energy, can provide the required sources such as electricity, heating, and cooling for the people who are living in such areas. The interactive solar system is a kind of solar system that can be effective, as they can transform stand-alone solar setups into dynamic microgrids using bidirectional communication with inverters and batteries. It can simultaneously convert off- and on-grid PV energy to electricity. One characteristic of this system is its ability to produce energy continuously even when the network is offline, thanks to the presence of batteries for storage. In other words, this system can share the surplus of energy with the grid and sell it to the grid to support the network-connected loads. In this study, a small-scale interactive system, with 11.9 for the stand-alone PV system and 10.24 kWp for the grid-tied PV system, is used to supply 7300 kWh of electrical energy for hydrogen production, and then the kWh transformed to kgH $$_2$$ for hydrogen storage is presented and analyzed for the house located in Ashukino City, in the Pushkinsky District of Moscow. This system consists of off-grid and on-grid PV panels; a distribution network; separate battery banks for off-grid and on-grid systems, which are connected to the PEM electrolyzer to produce hydrogen, which is stored in the metal hydride tanks; and connected panels for (in)sensitive AC loads. On the scale of this study, each of the stand-alone and grid-tied systems can generate 5149.7 and 7297.1 kWh of electrical energy, respectively. Of these values, 4901.214 and 6583.090 kWh of energy are needed to produce hydrogen, which totally can be stored as 213 kg of hydrogen in the metal hydride tanks. Performance parameters, including array yield, final yield, performance ratio, reference yield, and capacity factor, are obtained from IEC 61724. The annual yield and annual efficiencies of the PV array, inverter, and system are analyzed and presented as well. Also, how temperature affects the PV array and inverter performance. This system is modelled and analysed in PVsyst, and the data gathered is compared with the real system, which, despite the way the panels are arranged, matches. With an initial investment of $10000, and a loan of $100000, after clearance of the total loan in 10 years, the levelized cost of hydrogen will be equal to 1.4–3.5 $/kg, aligning with large-scale, low-carbon hydrogen economically viable for industrial use and heavy transport.- 7 July 2026
- Published by Springer Nature in Carbon Neutral Systems
- Vol. 2 (1) , 11
Open AccessPerformance analysis of the microgrid-scale hydrogen energy storage in Russia
Solar systems are very suitable systems as an alternative energy resource around the world because these systems, especially in remote areas where there is no access to energy, can provide the required sources such as electricity, heating, and cooling for the people who are living in such areas. The interactive solar system is a kind of solar system that can be effective, as they can transform stand-alone solar setups into dynamic microgrids using bidirectional communication with inverters and batteries. It can simultaneously convert off- and on-grid PV energy to electricity. One characteristic of this system is its ability to produce energy continuously even when the network is offline, thanks to the presence of batteries for storage. In other words, this system can share the surplus of energy with the grid and sell it to the grid to support the network-connected loads. In this study, a small-scale interactive system, with 11.9 for the stand-alone PV system and 10.24 kWp for the grid-tied PV system, is used to supply 7300 kWh of electrical energy for hydrogen production, and then the kWh transformed to kgH $$_2$$ for hydrogen storage is presented and analyzed for the house located in Ashukino City, in the Pushkinsky District of Moscow. This system consists of off-grid and on-grid PV panels; a distribution network; separate battery banks for off-grid and on-grid systems, which are connected to the PEM electrolyzer to produce hydrogen, which is stored in the metal hydride tanks; and connected panels for (in)sensitive AC loads. On the scale of this study, each of the stand-alone and grid-tied systems can generate 5149.7 and 7297.1 kWh of electrical energy, respectively. Of these values, 4901.214 and 6583.090 kWh of energy are needed to produce hydrogen, which totally can be stored as 213 kg of hydrogen in the metal hydride tanks. Performance parameters, including array yield, final yield, performance ratio, reference yield, and capacity factor, are obtained from IEC 61724. The annual yield and annual efficiencies of the PV array, inverter, and system are analyzed and presented as well. Also, how temperature affects the PV array and inverter performance. This system is modelled and analysed in PVsyst, and the data gathered is compared with the real system, which, despite the way the panels are arranged, matches. With an initial investment of $10000, and a loan of $100000, after clearance of the total loan in 10 years, the levelized cost of hydrogen will be equal to 1.4–3.5 $/kg, aligning with large-scale, low-carbon hydrogen economically viable for industrial use and heavy transport. - 1 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Developing a Mathematical Analysis for Hydrogen Production in the Off-grid PV System
One of the renewable resources can be utilized as an alternative to traditional fuels like natural gas and oil is hydrogen energy. Here, the technical model built to examine the integration of the PV system with green hydrogen generation is a generic framework can be used in any place on the globe. This research gives a mathematics-driven analysis for simulation of the model. It assesses how important elements including solar radiation, air quality, water surface flatness, and the characteristics of PV panels, electrolyzers, and adiabatic compressors affect the ability to generate energy and produce hydrogen. In this article, a new tool has been developed and presented based on García-Ruiz et al.'s method for multivariate parametric analyses and the selection of optimal design configurations (separated and integrated) based on particular solar energy and/or hydrogen production requirements. The results indicate and support a more reliable and affordable design for the residential settings.
- 1 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Developing a Mathematical Analysis for Hydrogen Production in the Off-grid PV System
One of the renewable resources can be utilized as an alternative to traditional fuels like natural gas and oil is hydrogen energy. Here, the technical model built to examine the integration of the PV system with green hydrogen generation is a generic framework can be used in any place on the globe. This research gives a mathematics-driven analysis for simulation of the model. It assesses how important elements including solar radiation, air quality, water surface flatness, and the characteristics of PV panels, electrolyzers, and adiabatic compressors affect the ability to generate energy and produce hydrogen. In this article, a new tool has been developed and presented based on García-Ruiz et al.'s method for multivariate parametric analyses and the selection of optimal design configurations (separated and integrated) based on particular solar energy and/or hydrogen production requirements. The results indicate and support a more reliable and affordable design for the residential settings.
- 24 February 2026
- Published by Elsevier in Applied Thermal Engineering
- Vol. 292
A techno-economic design framework and analysis for active solar heating systems in cold climates: A case study in Russia
- 24 February 2026
- Published by Elsevier in Applied Thermal Engineering
- Vol. 292
A techno-economic design framework and analysis for active solar heating systems in cold climates: A case study in Russia
- 8 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Design and Calculation of the Autonomous Hybrid Energy Complex in A Grid-Scale Hydrogen Energy Storage
The cost of producing hydrogen fuel via electrolysis is driven primarily by a single variable: the cost of electricity. Because electricity costs have the biggest impact on the financial viability of clean hydrogen, it is imperative that hydrogen electrolyzers consume as little electricity as possible. By producing high-efficiency clean hydrogen, in this research, a novel approach has been offered to seasonal energy storage. In this regard, hydrogen is obtained by electrolysis of water to store excess electricity generated in summers in the form of hydrogen, which in winters, it can be converted into electricity again in the building. This method allows us to cope with the problem of unsynchronous demand and supply of heat and cold, which consists in storing energy at times when energy generation exceeds demand. This method is based on the solar energy (combination pf solar energy in a Grid-Connected PV System (GCPVS) with electrochemistry-based hydrogen Combined Heat and Power (CHP) systems) and has been tested in a house located in Russia. And the results shows that the system efficiency is up to 70% with respect to primary energy.
- 8 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Design and Calculation of the Autonomous Hybrid Energy Complex in A Grid-Scale Hydrogen Energy Storage
The cost of producing hydrogen fuel via electrolysis is driven primarily by a single variable: the cost of electricity. Because electricity costs have the biggest impact on the financial viability of clean hydrogen, it is imperative that hydrogen electrolyzers consume as little electricity as possible. By producing high-efficiency clean hydrogen, in this research, a novel approach has been offered to seasonal energy storage. In this regard, hydrogen is obtained by electrolysis of water to store excess electricity generated in summers in the form of hydrogen, which in winters, it can be converted into electricity again in the building. This method allows us to cope with the problem of unsynchronous demand and supply of heat and cold, which consists in storing energy at times when energy generation exceeds demand. This method is based on the solar energy (combination pf solar energy in a Grid-Connected PV System (GCPVS) with electrochemistry-based hydrogen Combined Heat and Power (CHP) systems) and has been tested in a house located in Russia. And the results shows that the system efficiency is up to 70% with respect to primary energy.
- Open Access
- 3 February 2025
- Published by Springer Nature in Human-Centric Intelligent Systems
- Vol. 5 (1) , 21-43
Automatic Monitoring in Construction Projects: Scientometric Analysis and Visualization of Research Activities
This paper presents a comprehensive scientific analysis of research on automatic monitoring in construction projects. Through a methodical examination of 857 bibliographic records from three databases, we find important trends, novel themes, and key research areas in this field. Our findings reveal that machine learning (ML), building information modelling (BIM), and deep learning are the most the most popular techniques for automatic monitoring. Furthermore, we identify construction technologies and artificial intelligence (AI) as the primary research foci. So, the study uncovers collaboration patterns among researchers and institutions, highlighting key players and their contributions, identifies research gaps and challenges, such as the need for integrating AI, big data, and cloud computing into construction project monitoring, and proposes future research directions to address these challenges and enhance the effectiveness of automatic monitoring systems. By providing a systematic review and insightful analysis, this study contributes to the advancement of construction project monitoring. It offers valuable insights for researchers, practitioners, and policymakers to foster innovation, improve project performance, and ensure sustainable construction practices.
- 3 February 2025
- Published by Springer Nature in Human-Centric Intelligent Systems
- Vol. 5 (1) , 21-43
Open AccessAutomatic Monitoring in Construction Projects: Scientometric Analysis and Visualization of Research Activities
This paper presents a comprehensive scientific analysis of research on automatic monitoring in construction projects. Through a methodical examination of 857 bibliographic records from three databases, we find important trends, novel themes, and key research areas in this field. Our findings reveal that machine learning (ML), building information modelling (BIM), and deep learning are the most the most popular techniques for automatic monitoring. Furthermore, we identify construction technologies and artificial intelligence (AI) as the primary research foci. So, the study uncovers collaboration patterns among researchers and institutions, highlighting key players and their contributions, identifies research gaps and challenges, such as the need for integrating AI, big data, and cloud computing into construction project monitoring, and proposes future research directions to address these challenges and enhance the effectiveness of automatic monitoring systems. By providing a systematic review and insightful analysis, this study contributes to the advancement of construction project monitoring. It offers valuable insights for researchers, practitioners, and policymakers to foster innovation, improve project performance, and ensure sustainable construction practices.
- Open Access
- 28 December 2024
- Published by BSTU named after V.G. Shukhov in Energy Systems
THE EFFICIENCY OF SOLAR PANELS ON THE FACADE AND ROOF OF A HIGH-RISE LIVING BUILDING IN THE MOSCOW REGION
The purpose of the work was to evaluate the maximum possible electricity generation from solar panels placed on the surface of the building envelope and to assess the factors that can significantly affect the efficiency of the solar system. The object of the study is a 10-storey residential building located in the city of Mytishchi, Moscow region, built according to a standard project and put into operation in 1996. The PVsyst 7.4 software package was used to determine parameters and analyse data of complex photo-voltaic systems. As a result, the residential building can be fully supplied with solar energy to meet the electricity needs of the community, as well as the total electricity needs of the residents for personal needs by 31% through solar panels on the roof and 6% through solar panels on the facade per year, provided that there are no restrictions on the supply of electricity to the grid.
- 28 December 2024
- Published by BSTU named after V.G. Shukhov in Energy Systems
Open AccessTHE EFFICIENCY OF SOLAR PANELS ON THE FACADE AND ROOF OF A HIGH-RISE LIVING BUILDING IN THE MOSCOW REGION
The purpose of the work was to evaluate the maximum possible electricity generation from solar panels placed on the surface of the building envelope and to assess the factors that can significantly affect the efficiency of the solar system. The object of the study is a 10-storey residential building located in the city of Mytishchi, Moscow region, built according to a standard project and put into operation in 1996. The PVsyst 7.4 software package was used to determine parameters and analyse data of complex photo-voltaic systems. As a result, the residential building can be fully supplied with solar energy to meet the electricity needs of the community, as well as the total electricity needs of the residents for personal needs by 31% through solar panels on the roof and 6% through solar panels on the facade per year, provided that there are no restrictions on the supply of electricity to the grid.
- Open Access
- 25 December 2024
- Published by BSTU named after V.G. Shukhov in Energy Systems
DESIGN A HIGH-QUALITY PEM FUEL CELL CHP SYSTEM FOR RESIDENTIAL USE
This work deals with the analysis of a micro-cogeneration system or micro-Combined Heat and Power (μCHP) system for residential use based on a highest energy conversion efficiency Proton Ex-change Membrane (PEM) fuel cell. A detailed system analysis of the fuel cell stack operating at a maximum ambient temperature of 40 °C and balance of electricity are taken into account. The hydrogen gas processing section and the heat recovery system were also designed and optimized in term of heat recovery. The micro-cogeneration system has been modelled and set on the basis of experimental data obtained during the operation of the residential building in term of mass and energy balances while efficiency maps were obtained for a varying fuel utilization and current den-sity of the stack from ANSIS. The maximum electrical efficiency achieved is around 48%, with a stack voltage of 1.23V and a Fuel Utilization (FU) of 60%, achieves to 2% hydrogen energy ob-tained from hydrogen fuel cells based on this design, and cover electrical and heat loads at home.
- 25 December 2024
- Published by BSTU named after V.G. Shukhov in Energy Systems
Open AccessDESIGN A HIGH-QUALITY PEM FUEL CELL CHP SYSTEM FOR RESIDENTIAL USE
This work deals with the analysis of a micro-cogeneration system or micro-Combined Heat and Power (μCHP) system for residential use based on a highest energy conversion efficiency Proton Ex-change Membrane (PEM) fuel cell. A detailed system analysis of the fuel cell stack operating at a maximum ambient temperature of 40 °C and balance of electricity are taken into account. The hydrogen gas processing section and the heat recovery system were also designed and optimized in term of heat recovery. The micro-cogeneration system has been modelled and set on the basis of experimental data obtained during the operation of the residential building in term of mass and energy balances while efficiency maps were obtained for a varying fuel utilization and current den-sity of the stack from ANSIS. The maximum electrical efficiency achieved is around 48%, with a stack voltage of 1.23V and a Fuel Utilization (FU) of 60%, achieves to 2% hydrogen energy ob-tained from hydrogen fuel cells based on this design, and cover electrical and heat loads at home.
- Open Access
- 1 July 2024
- Published by IGI Global Scientific Publishing
- p. 1-48
Mathematical Algorithms Supporting the Optimization of Topical Aspects of Project Management
Project management is a highly sophisticated undertaking requiring the synthesis of various interconnected functions, processes, and activities. Numerous risks and uncertainties are inherent to all these inputs. Consequently, successful project management entails the optimization of the complete project as a system. In order to achieve this result, however, the various system subsets to the project must themselves be optimized. Given the current complexity of projects, optimization cannot be adequately undertaken by intuitive judgment alone. Philosophically, optimization is a mathematical concept, and mathematical algorithms are available to identify ideal operating parameters for any given problem. This chapter samples a range of features inherent to project management operations and presents mathematical algorithms that deliver optimal solution sets. The material is collated from literature and adapted to the project management context.
- 1 July 2024
- Published by IGI Global Scientific Publishing
- p. 1-48
Open AccessMathematical Algorithms Supporting the Optimization of Topical Aspects of Project Management
Project management is a highly sophisticated undertaking requiring the synthesis of various interconnected functions, processes, and activities. Numerous risks and uncertainties are inherent to all these inputs. Consequently, successful project management entails the optimization of the complete project as a system. In order to achieve this result, however, the various system subsets to the project must themselves be optimized. Given the current complexity of projects, optimization cannot be adequately undertaken by intuitive judgment alone. Philosophically, optimization is a mathematical concept, and mathematical algorithms are available to identify ideal operating parameters for any given problem. This chapter samples a range of features inherent to project management operations and presents mathematical algorithms that deliver optimal solution sets. The material is collated from literature and adapted to the project management context.
- 23 May 2022
- Published by Taylor & Francis
- p. 317-336
Polymer and their composites for water-splitting applications
We hear in the news every day about zero carbon emissions. The most alarming concerns air and environmental pollution due to carbon emissions that take the lives of millions of people every year, and this is not the only consequence. This pollution is increasing the heat of the planet every year and has caused the melting of ice, the burning of forests, and the consequent loss of life on the planet. Scientists have suggested the use of sustainable resources to prevent this. One way to use sustainable resources is to utilize water splitting. The history of water splitting dates back to 1860, when a French inventor named H. Charles Vion invented a device for the water splitting reaction and the production of hydrogen gas from water. Gradually, scientists began to think about developing this reaction and enhancing the methods of electrolysis, photocatalysis, radiolysis, and thermolysis. Since these methods alone were not very effective, they decided to use polymers and their composites to develop these methods and increase their efficiency. This chapter, after introducing the applications of water splitting methods, polymers and their compounds in these methods, shows how to use them in water splitting to generate hydrogen and oxygen gases.
- 23 May 2022
- Published by Taylor & Francis
- p. 317-336
Polymer and their composites for water-splitting applications
We hear in the news every day about zero carbon emissions. The most alarming concerns air and environmental pollution due to carbon emissions that take the lives of millions of people every year, and this is not the only consequence. This pollution is increasing the heat of the planet every year and has caused the melting of ice, the burning of forests, and the consequent loss of life on the planet. Scientists have suggested the use of sustainable resources to prevent this. One way to use sustainable resources is to utilize water splitting. The history of water splitting dates back to 1860, when a French inventor named H. Charles Vion invented a device for the water splitting reaction and the production of hydrogen gas from water. Gradually, scientists began to think about developing this reaction and enhancing the methods of electrolysis, photocatalysis, radiolysis, and thermolysis. Since these methods alone were not very effective, they decided to use polymers and their composites to develop these methods and increase their efficiency. This chapter, after introducing the applications of water splitting methods, polymers and their compounds in these methods, shows how to use them in water splitting to generate hydrogen and oxygen gases.