JMJames Robert Morris

James Robert Morris

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


James Robert Morris has a total of 372 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    High-throughput approach for investigating interdiffusion in medium- and high-entropy alloys

    by Maik Rajkowski, Adeline Durand, James R. Morris, Gunther Eggeler, Guillaume Laplanche

    Interdiffusion experiments are usually time-consuming and tedious since diffusion couples must be annealed at several temperatures for a long time. The efforts required to study interdiffusion in multicomponent alloys increase dramatically as multiple diffusion couples are required to cover broad composition ranges and determine the diffusivities of individual elements in different chemical environments. To circumvent this challenge, we present a high-throughput approach applicable to single-phase and compositionally complex alloys, which are assumed to approximate ideal solid solutions. Here, a simple diffusion-multiple experiment combined with a physically based kinetic model is proposed to efficiently determine the diffusion coefficients of the constituent elements in quaternary CrFeCoNi alloys. Compared with tracer diffusivities reported in the literature, the results, thus, obtained do not differ by more than a factor of 2 and were obtained from a single interdiffusion experiment. In contrast, the diffusivities simulated with commercial mobility and thermodynamic databases are strongly overestimated by a factor ranging from 1 to 16. Therefore, our approach enables high-throughput determination of diffusivities and can help in the design of alloys for high-temperature applications where diffusion plays a key role.


  • A US perspective on closing the carbon cycle to defossilize difficult-to-electrify segments of our economy

    by Wendy J. Shaw, Michelle K. Kidder, Simon R. Bare, Massimiliano Delferro, James R. Morris, Francesca M. Toma, Sanjaya D. Senanayake, Tom Autrey, Elizabeth J. Biddinger, Shannon Boettcher, et al.

    Electrification to reduce or eliminate greenhouse gas emissions is essential to mitigate climate change. However, a substantial portion of our manufacturing and transportation infrastructure will be difficult to electrify and/or will continue to use carbon as a key component, including areas in aviation, heavy-duty and marine transportation, and the chemical industry. In this Roadmap, we explore how multidisciplinary approaches will enable us to close the carbon cycle and create a circular economy by defossilizing these difficult-to-electrify areas and those that will continue to need carbon. We discuss two approaches for this: developing carbon alternatives and improving our ability to reuse carbon, enabled by separations. Furthermore, we posit that co-design and use-driven fundamental science are essential to reach aggressive greenhouse gas reduction targets.


  • Open Access

    Inducing thermodynamically blocked atomic ordering via strongly driven nonequilibrium kinetics

    by Chulho Jung, Yungok Ihm, Do Hyung Cho, Heemin Lee, Daewoong Nam, Sangsoo Kim, In-Tae Eom, Jaehyun Park, Chan Kim, Yoonhee Kim, et al.

    Ultrafast laser–excited nanoparticle images reveal nonequilibrium kinetics–driven unusual surface ordering at high temperature.


  • Role of Static Displacements in Stabilizing Body Centered Cubic High Entropy Alloys

    by G. D. Samolyuk, Y. N. Osetsky, G. M. Stocks, J. R. Morris

    The configurational entropy of high entropy alloys (HEAs) plays little role in the stabilization of one particular crystal structure over another. We show that disorder-induced atomic displacements help stabilize body centered cubic (bcc) structure HEAs with average valences <4.7. These disorder-induced atomic displacements mimic the temperature-induced vibrations that stabilize the bcc structure of group IV elemental metals at high temperatures. The static displacements are significantly larger than for face centered cubic HEAs, approaching values associated with the Lindemann criterion for melting. Chemical disorder in high entropy alloys have a previously unidentified, nonentropic energy contribution that stabilizes a particular crystalline ground state.


  • Stacking faults and alternate crystal structures for the shape-memory alloy NiTi

    by M. Krcmar, German D. Samolyuk, James R. Morris

    We use ab initio calculations to study the role of stacking faults in connecting the high-temperature B2 and the theoretically predicted low-temperature B33 NiTi phases. In contrast with prior work, we describe the B2→B33 phase transformation in terms of alternate bilayer shifts by 12 [100] on the (011)B2 plane, obtaining a viable pathway; the same mechanism could also work with the B19 parent phase. We then examine B33-like structures built from alternate stacking sequences of B19 bilayers, constructed to have monoclinic tilt angles close to the experimentally reported NiTi B19′ martensite, and find four low-energy stacking-fault variants with energies 5.8–8.5 meV/atom above the calculated B19′ martensite structure, suggesting that such structures might appear as a part of the NiTi martensite phase at low temperatures. Investigating further the occurrence of specific coordinated planar shifts in NiTi systems, we report a dynamically stable NiTi B27 phase and find that it is only 1.2 meV/atom above the calculated B33 ground-state structure, thus having a potential to also play a role in NiTi martensitic phase transformation.


  • Equilibrium solute segregation to matrix- θ′ precipitate interfaces in Al-Cu alloys from first principles

    by G. D. Samolyuk, M. Eisenbach, D. Shin, Y. N. Osetsky, A. Shyam, J. R. Morris

    Particular combinations of solute atoms segregated to the interface of the Al and θ′−Al2Cu in Al-Cu alloys can help stabilize θ′ precipitates at high temperatures. Stabilization of such precipitates is determined by a combination of thermodynamics (including driving forces for coarsening and transformation and solute segregation tendencies) and kinetic effects (including solute diffusion and interfacial mobility in the presence of interfacial solute segregation). For some alloys such as recent Al-Cu-based alloys, multiple solutes segregate in significant quantities to interfaces, and solute-solute interactions at the interface are important, with multiple types of solutes competing for similar interfacial sites. To treat this situation, we develop and apply a statistical mechanics approach to calculate the temperature-dependent equilibrium solute atoms distribution near the coherent and semicoherent interfaces between the Al matrix and the θ′−Al2Cu precipitates. The developed approach is applied to the investigation of Si, Mn, and Zr segregation at the interface, as particular combinations of these elements affect the thermal stability of the θ′ precipitates. We demonstrate that because Si and Mn atoms segregate on the same semicoherent interface, the presence of Si reduces the concentration of Mn solutes at the interface. Si atoms preferably occupy the first layer of the interface and compete with Mn atoms for one type of particular sites in the layer. Mn atoms preferably occupy the second layer of the semicoherent interface, and the Mn-Mn interaction plays an important role in their distribution. Zr atoms mostly segregate on one of the two nonequivalent sites of the second layer of the coherent interface. Due to symmetry properties of the coherent interface, the calculations show that the segregation Zr of atoms to this interface will likely lead to the formation of L12 ordered Al3Zr layer.


  • Open Access

    Predictive multiphase evolution in Al-containing high-entropy alloys

    by L. J. Santodonato, P. K. Liaw, R. R. Unocic, H. Bei, J. R. Morris

    The ability to predict and understand phases in high-entropy alloys (HEAs) is still being debated, and primarily true predictive capabilities derive from the known thermodynamics of materials. The present work demonstrates that prior work using high-throughput first-principles calculations may be further utilized to provide direct insight into the temperature- and composition-dependent phase evolution in HEAs, particularly Al-containing HEAs with a strengthening multiphase microstructure. Using a simple model with parameters derived from first-principles calculations, we reproduce the major features associated with Al-containing phases, demonstrating a generalizable approach for exploring potential phase evolution where little experimental data exists. Neutron scattering, in situ microscopy, and calorimetry measurements suggest that our high-throughput Monte Carlo technique captures both qualitative and quantitative features for both intermetallic phase formation and microstructure evolution at lower temperatures. This study provides a simple approach to guide HEA development, including ordered multi-phase HEAs, which may prove valuable for structural applications.


  • Assessing the Predictive Power of Density Functional Theory in Finite-Temperature Hydrogen Adsorption/Desorption Thermodynamics

    by Yungok Ihm, Changwon Park, Jacek Jakowski, Eui-Sup Lee, James R. Morris, Ji-Hoon Shim, Yong-Hyun Kim, Bobby G. Sumpter, Mina Yoon


  • Phase Transition of H2in Subnanometer Pores Observed at 75 K

    by Raina J. Olsen, Andrew K. Gillespie, Cristian I. Contescu, Jonathan W. Taylor, Peter Pfeifer, James R. Morris

    Here we report a phase transition in H2 adsorbed in a locally graphitic Saran carbon with subnanometer pores 0.5–0.65 nm in width, in which two layers of hydrogen can just barely squeeze, provided they pack tightly. The phase transition is observed at 75 K, temperatures far higher than other systems in which an adsorbent is known to increase phase transition temperatures: for instance, H2 melts at 14 K in the bulk, but at 20 K on graphite because the solid H2 is stabilized by the surface structure. Here we observe a transition at 75 K and 77–200 bar: from a low-temperature, low-density phase to a high-temperature, higher density phase. We model the low-density phase as a monolayer commensurate solid composed mostly of para-H2 (the ground nuclear spin state, S = 0) and the high-density phase as an orientationally ordered bilayer commensurate solid composed mostly of ortho-H2 (S = 1). We attribute the increase in density with temperature to the fact that the oblong ortho-H2 can pack more densely. The transition is observed using two experiments. The high-density phase is associated with an increase in neutron backscatter by a factor of 7.0 ± 0.1. Normally, hydrogen produces no backscatter (scattering angle >90°). This backscatter appears along with a discontinuous increase in the excitation mass from 1.2 amu to 21.0 ± 2.3 amu, which we associate with collective nuclear spin excitations in the orientationally ordered phase. Film densities were measured using hydrogen adsorption. No phase transition was observed in H2 adsorbed in control activated carbon materials.