OKOlga Kasian

Olga Kasian

*This is an algorithmically generated author record based on publicly available information.

Olga Kasian has a total of 344 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nickel‐Free Perovskite Solar Cells Enabled by Self‐Assembled Monolayers: A Pathway to Efficient and Recyclable Devices

    by Yanxue Wang, Roman Kučera, Sinuhé Perea‐Puente, Mykhailo Sytnyk, Andrew Hainer, Zijian Peng, Savannah Bennett, Juan S. Rocha‐Ortiz, Albert These, Hakan U Dag, et al.

    High efficiency inverted perovskite solar cells often rely on nickel‐containing hole‐selective interfaces such as NiOx. However, the use of nickel presents sustainability challenges, as the material is inherently toxic and cross‐contamination during end‐of‐life processing can compromise material recovery and recyclability. Here, we develop a nickel‐free hole‐selective interface material based on phenyl‐substituted phosphonic‐acid carbazole self‐assembled monolayers (Ph‐nPACz). Candidate molecules were identified through rational structure‐property screening of the substituents of the carbazole core, anchoring groups and linkers. Among this molecular family, Ph‐5PACz delivers the best overall performance, offering improved interfacial wettability and enhanced buried‐interface stability compared to the NiOx/Me‐4PACz reference. Devices incorporating Ph‐5PACz achieve a power conversion efficiency of 25.3%, compared to 21.7% for the control, driven by a higher fill factor and efficient charge extraction. The chemical robustness of the nickel‐free interface enables a closed‐loop recycling route unavailable to nickel‐based devices, with recycled‐ITO devices retaining close to 98% of their initial performance. Coupled life‐cycle and techno‐economic analyses further indicate substantial sustainability gains, including reduced energy demand, markedly lower raw metal usage and toxicity‐related impacts, and a generalized reduction of up to 29% across ReCiPe endpoint indicators.

  • Open Access

    Vapor‐Phase Grain‐Boundary Anchoring Enables Molecular Toughening and Record Bending Endurance in Pilot‐Scale Roll‐to‐Roll‐Printed Flexible Perovskite Modules

    by Lirong Dong, Viktor Rehm, Shudi Qiu, Zexian Han, Naveen Harindu Hemasiri, Michael Wurmshuber, Michael Wagner, Cindy‐Ly Tavera‐Méndez, Dorothea Wisser, Chaohui Li, et al.

    Flexible lead‐halide perovskite solar modules with carbon electrodes (C‐fPSMs) are promising for printed photovoltaics due to their low cost and compatibility with roll‐to‐roll (R2R) fabrication. However, the mechanical fragility of microcrystalline perovskite films, arising from their high grain‐boundary density, limits their practical application. Here, we report a vapor‐phase grain‐boundary anchoring strategy via thiol vapor annealing to molecularly toughen printed perovskite layers. Thiol molecules interact with intermediate species and preferentially anchor at surfaces and grain boundaries, reprogramming crystallization across the film. This chemomechanical conditioning promotes grain growth, reduces trap density, and transforms the deformation behavior from brittle fracture to ductile strain accommodation, as evidenced by reduced Young's modulus, increased yield strain, and significantly enhanced fracture toughness. As a result, treated devices retain 93% of their initial performance after 25 000 bending cycles, representing a new benchmark for flexible perovskite cells. In addition, improved film uniformity and interfacial contact enable power conversion efficiencies of 15.7% for R2R‐printed cells and 12.1% for modules (20.25 cm 2 ), with scalability demonstrated up to 900 cm 2 (17.26%). This work provides a scalable strategy to simultaneously enhance mechanical robustness and photovoltaic performance.

  • Open Access

    Vapor‐Phase Grain‐Boundary Anchoring Enables Molecular Toughening and Record Bending Endurance in Pilot‐Scale Roll‐to‐Roll‐Printed Flexible Perovskite Modules

    by Lirong Dong, Viktor Rehm, Shudi Qiu, Zexian Han, Naveen Harindu Hemasiri, Michael Wurmshuber, Michael Wagner, Cindy‐Ly Tavera‐Méndez, Dorothea Wisser, Chaohui Li, et al.

    Flexible lead‐halide perovskite solar modules with carbon electrodes (C‐fPSMs) are promising for printed photovoltaics due to their low cost and compatibility with roll‐to‐roll (R2R) fabrication. However, the mechanical fragility of microcrystalline perovskite films, arising from their high grain‐boundary density, limits their practical application. Here, we report a vapor‐phase grain‐boundary anchoring strategy via thiol vapor annealing to molecularly toughen printed perovskite layers. Thiol molecules interact with intermediate species and preferentially anchor at surfaces and grain boundaries, reprogramming crystallization across the film. This chemomechanical conditioning promotes grain growth, reduces trap density, and transforms the deformation behavior from brittle fracture to ductile strain accommodation, as evidenced by reduced Young's modulus, increased yield strain, and significantly enhanced fracture toughness. As a result, treated devices retain 93% of their initial performance after 25 000 bending cycles, representing a new benchmark for flexible perovskite cells. In addition, improved film uniformity and interfacial contact enable power conversion efficiencies of 15.7% for R2R‐printed cells and 12.1% for modules (20.25 cm 2 ), with scalability demonstrated up to 900 cm 2 (17.26%). This work provides a scalable strategy to simultaneously enhance mechanical robustness and photovoltaic performance.

  • Open Access

    Revealing Structure-Performance Relations in Core-Shell Catalyst Based PEM Water Electrolyzer Anodes with Low Iridium Loading

    by Selina Finger, Darius Hoffmeister, Tien-Ching Ma, Lena Fiedler, A. Lucía Morales, Andreas Körner, Nico Roubicek, Leopold Lahn, Johannes Böhmer, Thomas Przybilla, et al.

    Reducing iridium loading in proton exchange membrane water electrolyzer anodes is essential to meet cost targets for large-scale green hydrogen production. Here, we report a photodeposition-based synthesis of TiO 2 @IrO 2 core-shell catalysts with iridium contents as low as 10 wt%. The influence of annealing temperature, iridium content, and iridium loading on structural and electrochemical properties is systematically investigated. An annealing temperature of 450 °C provides the best compromise between activity, conductivity, and stability. Remarkably, even at 10 wt% Ir (≈ 4.5 vol% IrO 2 ), the core-shell architecture maintains high electronic conductivity and mass activity. The low iridium content results in ~18 µm thick catalyst layers at a loading of 0.35 mg Ir cm ‑2 , corresponding to a high thickness factor of 52.0 ± 0.8 µm (mg Ir cm ‑2 ) ‑1 . Two-dimensional, two‑phase performance modeling reveals that these thick catalyst layers improve electronic connectivity at low loadings, leading to higher catalyst utilization than a commercial reference. As a result, the core-shell catalyst outperforms the reference in single-cell measurements, achieving 1.77 V at 2 A cm ‑2 at a low loading of 0.31 mg Ir cm ‑2 . During 200 h durability testing, reversible degradation is observed, while irreversible losses remain on par with the reference and the core–shell structure is preserved.

  • Top Cited Papers
    Open Access

    Degradation phenomena in PEMWE revealed by correlative electrochemical and nanostructure analysis

    by Selina Finger, Birk Fritsch, Mingjian Wu, Leopold Lahn, Darius Hoffmeister, Johannes Will, Olga Kasian, Erdmann Spiecker, Simon Thiele, Anna T.S. Freiberg, et al.

    Correlative analysis reveals operational mode-dependent PEMWE degradation, highlighting Pt dissolution and Ir oxidation as key durability challenges.


  • Self-Assembled Monolayers from Triethoxysilanes: Influence of Water Content and Chemical Structure on Formation Kinetics and Morphology

    by Sophie Mayer, Evanie Franz, Giovanni Rossetto, Leopold Lahn, Julien Steffen, Andreas Görling, Olga Kasian, Olaf Brummel, Jörg Libuda, Nicolas Vogel

    The condensation of silane molecules onto oxidic surfaces, known as self-assembled monolayers (SAMs), is a key methodology to control surface properties in a simple and versatile fashion. SAM formation, however, can be sensitive to subtle changes in the reaction conditions, which can lead to varying macroscopic properties. Here, we use attenuated total internal reflection infrared (ATR-IR) spectroscopy and quartz crystal microbalance with dissipation (QCM-D) as in situ methods to investigate SAM formation pathways, which we complement with X-ray photoelectron spectroscopy, atomic force microscopy, and contact angle measurements as ex situ methods to assess the final composition, morphology, and functionality of the formed SAMs. We first spectroscopically resolve and quantify differences in the reaction pathway in dry and wet reaction conditions, corroborating the existing literature. Second, we investigate the formation of binary SAMs using n-butyltrimethoxysilane and 1-(3-triethoxysilylpropyl)-2-imidazoline silane as a model system. We show that imidazoline silane is preferentially incorporated into the SAM at low concentrations and that mixed SAMs exhibit much increased surface roughness compared to the pure silane surfaces. The in situ investigation reveals that the SAM deposition of imidazoline-based SAMs is not self-limiting and continuously adds deposited mass on the surface. ATR-IR spectroscopy suggests multiple interactions of the imidazoline moiety with the surface, which enable the polymerization of silane moieties into solution and thus rationalize the increased mass deposition and surface roughness. Our study demonstrates the potential of combining in situ and ex situ characterization methods to reveal differences in reaction pathways that can rationalize surprising macroscopic property changes observed in the formation of functional SAMs.


  • Diastereomeric Fullerene Composite Engineering for Enhanced Perovskite Solar Cells

    by Jianchang Wu, Jiyun Zhang, Luyao Wang, Jovana Jakšić, Anastasia Barabash, Dušan Veljković, Andreas J. Bornschlegl, Vladislav Jovanov, Leopold Lahn, Olga Kasian, et al.

    Achieving high performance and long-term stability in perovskite solar cells (PSCs) typically requires the use of surface passivation layers to suppress the interfacial defects. However, these additional passivation agents often introduce chemical and structural instabilities, limiting the device lifetime. Here, we present a molecular engineering strategy utilizing a chiral series of C60-Furan-Sugar (CFS) fullerene derivatives blended with [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) to modify the electron transport layer (ETL). The incorporation of CFSs significantly enhances the electron mobility and dielectric constant of the ETL, while their intrinsic passivation functionality effectively passivates perovskite surface defects. As a result, PSCs employing PCBM:CFS-RS blends achieve a power conversion efficiency (PCE) of 25.81% without the use of additional passivation layers and retain 95% of their initial performance after 1000 h of aging. Notably, CFS-RS is a chiral molecule bearing a side chain with R/S configurational isomers, which facilitates interfacial compatibility and contributes to the enhanced device performance. This work demonstrates that tuning the orientation of polar substituents in fullerene side chains can effectively influence the optoelectronic properties of the blended films, thereby simultaneously enhancing both efficiency and stability in PSCs.


  • Open Access

    How the ionic liquid [C2C1Im][OTf] affects the stability of Pt(111) during potential cycling

    by Felix Hilpert, Yunsheng Qiu, Leopold Lahn, Kevin Höllring, Nicola Taccardi, Peter Wasserscheid, Olga Kasian, Ana-Sunčana Smith, Karl J. J. Mayrhofer, Valentin Briega-Martos, et al.

    Modifying electrocatalysts with ionic liquids (ILs) not only allows for precise control of selectivity but also often directly impacts the stability of the electrocatalyst. In this work, we study how the IL 1-ethyl-3-methylimidazolium trifluoromethanesulfonate [C2C1Im][OTf] influences the electrochemical stability of the Pt(111) surface in acidic electrolyte (0.1 M HClO4) during oxidation and reduction cycles (ORCs; 0.05 – 1.5 VRHE). We used complementary electrochemical in-situ methods, namely, cyclic voltammetry (CV), online inductively coupled plasma mass spectrometry (ICP-MS), and electrochemical scanning tunneling microscopy (EC-STM) in combination with an algorithmic pattern recognition approach. In the absence of the IL, Pt(111) dissolves during oxidative cycling via cathodic transient dissolution. In consecutive cycles, small Pt clusters are formed, which grow with increasing cycle number. In the presence of the IL, the dissolution rate increases by a factor of 5 and an additional anodic dissolution pathway occurs. The changes in the dissolution behavior during ORCs, however, have only minor impact on the morphological changes and the adsorption sites formed. We explain latter observation by the dominance of morphological changes due to the formation and reduction of an amorphous oxide layer, as opposed to dissolution and redeposition.


  • Open Access

    Investigating H2 Gas-Promoted Ir Deposition on Pt Black Nanoparticles for Synthesizing a Bifunctional Catalyst for OER and ORR in Acidic Media

    by Stephan Ruck, Andreas Hutzler, Leopold Lahn, Olga Kasian, Simon Thiele, Chuyen van Pham, Anna T.S. Freiberg


  • Open Access

    Electrospun Iridium-Based Nanofiber Catalysts for Oxygen Evolution Reaction: Influence of Calcination on Activity–Stability Relation

    by Miklós Márton Kovács, Birk Fritsch, Leopold Lahn, Julien Bachmann, Olga Kasian, Karl J. J. Mayrhofer, Andreas Hutzler, Dominik Dworschak

    The enhanced utilization of noble metal catalysts through highly porous nanostructures is crucial to advancing the commercialization prospects of proton exchange membrane water electrolysis (PEMWE). In this study, hierarchically structured IrOx-based nanofiber catalyst materials for acidic water electrolysis are synthesized by electrospinning, a process known for its scalability and ease of operation. A calcination study at various temperatures from 400 to 800 °C is employed to find the best candidates for both electrocatalytic activity and stability. Morphology, structure, phase, and chemical composition are investigated using a scale-bridging approach by SEM, TEM, XRD, and XPS to shed light on the structure-function relationship of the thermally prepared nanofibers. Activity and stability are monitored by a scanning flow cell (SFC) coupled with an inductively coupled plasma mass spectrometer (ICP-MS). We evaluate the dissolution of all metals potentially incorporated into the final catalyst material throughout the synthesis pathway. Despite the opposite trend of performance and stability, the present study demonstrates that an optimum between these two aspects can be achieved at 600 °C, exhibiting values that are 1.4 and 2.4 times higher than those of the commercial reference material, respectively. The dissolution of metal contaminations such as Ni, Fe, and Cr remains minimal, exhibiting no correlation with the steps of the electrochemical protocol applied, thus exerting a negligible influence on the stability of the nanofibrous catalyst materials. This work demonstrates the scalability of electrospinning to produce nanofibers with enhanced catalyst utilization and their testing by SFC-ICP-MS. Moreover, it illustrates the influence of calcination temperature on the structure and chemical composition of the nanofibers, resulting in outstanding electrocatalytic performance and stability compared to commercial catalyst materials for PEMWE.