Pietro Paolo Ciottoli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Pietro Paolo Ciottoli has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Riccardo Malpica Galassi
Sapienza University of Rome
18 shared publications - Mauro Valorani
Sapienza University of Rome
16 shared publications - Hong Geun Im
King Abdullah University of Science and Technology
9 shared publications Mauro Valorani
9 shared publications- Emanuele Martelli
Second University of Naples, 81031 Aversa, Italy
8 shared publications - Pasquale Eduardo Lapenna
Department of Mechanical and Aerospace Engineering, Sapienza University of Rome, Rome, Italy
7 shared publications
Latest Publications
- Open Access
- 14 July 2026
- Published by Elsevier in SSRN Electronic Journal
Mission-Resolved Fuel-Cell Sizing for Hydrogen Aircraft: Quantifying Operating-Point Effects and Design Trade-Offs
In conceptual sizing of hydrogen fuel-cell aircraft, assumptions about fuel-cell operation along the mission can influence the predicted take-off mass by an amount comparable to the differences between competing propulsion-system concepts. We show that representing the fuel-cell system by a single fixed operating point, whether a high-power design condition or a high-efficiency cruise condition, introduces large systematic biases in aircraft sizing. For a 48-passenger, 750 NM regional aircraft, the predicted take-off mass varies by approximately -7 to +26% across these assumptions. The origin of this discrepancy is a fundamental separation between power and energy: the fuel-cell stack is sized by the mission peak power, whereas hydrogen consumption and cooling requirements depend on the energy integrated over the mission.These effects are quantified with PhlyGreen, an open conceptual-design framework that resolves the fuel-cell operating point throughout the mission, sizes the stack from the power it actually delivers, and treats the cooling system as an explicit sizing driver. Beyond operating-point effects, the analysis reveals three additional design insights. First, the balance-of-plant power demand increases with altitude, reducing the net power available from the stack and potentially rendering a sea-level-sized system power-limited at cruise. Second, battery-assisted take-off and climb can substantially reduce the required fuel-cell size, but decrease aircraft mass only above a threshold battery specific energy (380 Wh/kg for the present case). Third, the design cell voltage exhibits a take-off-mass optimum near 0.48 V; beyond this point, higher cell efficiency is offset by the increased stack area, yielding a heavier aircraft.
- 14 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMission-Resolved Fuel-Cell Sizing for Hydrogen Aircraft: Quantifying Operating-Point Effects and Design Trade-Offs
In conceptual sizing of hydrogen fuel-cell aircraft, assumptions about fuel-cell operation along the mission can influence the predicted take-off mass by an amount comparable to the differences between competing propulsion-system concepts. We show that representing the fuel-cell system by a single fixed operating point, whether a high-power design condition or a high-efficiency cruise condition, introduces large systematic biases in aircraft sizing. For a 48-passenger, 750 NM regional aircraft, the predicted take-off mass varies by approximately -7 to +26% across these assumptions. The origin of this discrepancy is a fundamental separation between power and energy: the fuel-cell stack is sized by the mission peak power, whereas hydrogen consumption and cooling requirements depend on the energy integrated over the mission.These effects are quantified with PhlyGreen, an open conceptual-design framework that resolves the fuel-cell operating point throughout the mission, sizes the stack from the power it actually delivers, and treats the cooling system as an explicit sizing driver. Beyond operating-point effects, the analysis reveals three additional design insights. First, the balance-of-plant power demand increases with altitude, reducing the net power available from the stack and potentially rendering a sea-level-sized system power-limited at cruise. Second, battery-assisted take-off and climb can substantially reduce the required fuel-cell size, but decrease aircraft mass only above a threshold battery specific energy (380 Wh/kg for the present case). Third, the design cell voltage exhibits a take-off-mass optimum near 0.48 V; beyond this point, higher cell efficiency is offset by the increased stack area, yielding a heavier aircraft.
- Open Access
- 9 July 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Heterogeneous autoignition of an isoparaffinic alcohol-to-jet fuel droplet cloud with preferential evaporation
- 9 July 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Open AccessHeterogeneous autoignition of an isoparaffinic alcohol-to-jet fuel droplet cloud with preferential evaporation
- Open Access
- 2 July 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
A semi-supervised learning technique for the region-wise simplification of chemical kinetics: Application to Hydrogen–Ammonia flames
- 2 July 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Open AccessA semi-supervised learning technique for the region-wise simplification of chemical kinetics: Application to Hydrogen–Ammonia flames
- Open Access
- 1 April 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (4)
Large-eddy simulations of transcritical mixing of conventional and sustainable aviation fuels
Drop-in sustainable aviation fuels (SAFs), in conjunction with gas turbines featuring increased overall pressure ratios, are central to the decarbonization of the aviation sector in the short to medium term. However, the impact of SAF thermophysical properties on mixing processes under transcritical conditions, supported by the development of suitable numerical methodologies to represent multi-component aviation fuels, remains underinvestigated. In this study, a diffuse-interface large-eddy simulation framework, incorporating real-fluid thermodynamics based on the Peng–Robinson equation of state together with multi-component transport, is employed to analyze a single-round injector operating at 60 bar and 900 K ambient temperature. Three aviation fuels, represented by ad hoc physicochemical surrogate mixtures, are considered: a conventional petroleum-derived jet fuel (Jet A-2), an alcohol-to-jet sustainable aviation fuel (C-1 AtJ), and a 50% volumetric blend of the two, each injected at 322 K. Although the flow fields are broadly similar across all investigated fuels, statistical analyses reveal that compositional differences in the multi-component surrogates significantly alter their thermophysical properties, thereby governing the mixing dynamics under transcritical conditions. Quantitatively, Jet A-2 exhibits an approximately 27% shorter potential core and 10% wider mixing layers relative to C-1 AtJ. Furthermore, it shows temperatures 30–50 K higher in the transitional zone, while the 50% volumetric blend consistently displays intermediate behavior. These results demonstrate that the thermophysical response in the pseudo-boiling regime, particularly the fuel-specific heat capacity, governs transcritical injection and mixing in aeronautical fuel injectors.
- 1 April 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (4)
Open AccessLarge-eddy simulations of transcritical mixing of conventional and sustainable aviation fuels
Drop-in sustainable aviation fuels (SAFs), in conjunction with gas turbines featuring increased overall pressure ratios, are central to the decarbonization of the aviation sector in the short to medium term. However, the impact of SAF thermophysical properties on mixing processes under transcritical conditions, supported by the development of suitable numerical methodologies to represent multi-component aviation fuels, remains underinvestigated. In this study, a diffuse-interface large-eddy simulation framework, incorporating real-fluid thermodynamics based on the Peng–Robinson equation of state together with multi-component transport, is employed to analyze a single-round injector operating at 60 bar and 900 K ambient temperature. Three aviation fuels, represented by ad hoc physicochemical surrogate mixtures, are considered: a conventional petroleum-derived jet fuel (Jet A-2), an alcohol-to-jet sustainable aviation fuel (C-1 AtJ), and a 50% volumetric blend of the two, each injected at 322 K. Although the flow fields are broadly similar across all investigated fuels, statistical analyses reveal that compositional differences in the multi-component surrogates significantly alter their thermophysical properties, thereby governing the mixing dynamics under transcritical conditions. Quantitatively, Jet A-2 exhibits an approximately 27% shorter potential core and 10% wider mixing layers relative to C-1 AtJ. Furthermore, it shows temperatures 30–50 K higher in the transitional zone, while the 50% volumetric blend consistently displays intermediate behavior. These results demonstrate that the thermophysical response in the pseudo-boiling regime, particularly the fuel-specific heat capacity, governs transcritical injection and mixing in aeronautical fuel injectors.
- Open Access
Multi-component HyChem kinetic mechanism generation using trust-region Bayesian optimization
- Open Access
- 7 November 2025
- Published by Elsevier in Combustion and Flame
- Vol. 283
Numerical simulations of a swirled turbulent spray flame: chemistry modeling effects on multi-regime combustion characteristics
- 7 November 2025
- Published by Elsevier in Combustion and Flame
- Vol. 283
Open AccessNumerical simulations of a swirled turbulent spray flame: chemistry modeling effects on multi-regime combustion characteristics
- Open Access
- 16 September 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 176
A CRN-CFD incremental fidelity framework for the design and optimization of ammonia-fueled combustors
- 16 September 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 176
Open AccessA CRN-CFD incremental fidelity framework for the design and optimization of ammonia-fueled combustors
- Open Access
- 9 June 2025
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 251
Characterization of turbulent pseudo-boiling in transcritical and doubly-transcritical oxygen–methane flames
- 9 June 2025
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 251
Open AccessCharacterization of turbulent pseudo-boiling in transcritical and doubly-transcritical oxygen–methane flames
- 9 November 2024
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 114 (3) , 857-885
Evaluation of Non-ideal Fluid Modeling for Droplet Evaporation in Jet-Engine-Like Conditions
- 9 November 2024
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 114 (3) , 857-885
Evaluation of Non-ideal Fluid Modeling for Droplet Evaporation in Jet-Engine-Like Conditions
- 17 October 2024
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 114 (1) , 275-298
Analysis of Droplet Evaporation Dynamics Using Computational Singular Perturbation and Tangential Stretching Rate
- 17 October 2024
- Published by Springer Nature in Flow, Turbulence and Combustion
- Vol. 114 (1) , 275-298
Analysis of Droplet Evaporation Dynamics Using Computational Singular Perturbation and Tangential Stretching Rate