Beth Mortimer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Beth Mortimer has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Graham Keith Taylor
Department of Biology, University of Oxford , Oxford OX1 3SZ, UK
5 shared publications Alice Cicirello
University of Cambridge 3
4 shared publications- Thomas E. Miller
University of Oxford 1
4 shared publications A. Soler
Department of Continuum Mechanics and Structural Analysis, Universidad Carlos III de Madrid , Madrid , Spain
3 shared publicationsF. Vollrath
Department of Zoology, University of Oxford , Oxford , UK
3 shared publications- Jun Wu
University of Oxford 1
3 shared publications
Latest Publications
- Open Access
- 17 June 2026
- Published by The Royal Society in Proceedings Of The Royal Society B-Biological Sciences
- Vol. 293 (2073)
Spider leg biomechanics as an information filter for vibration sensing
Substrate-borne vibration sensing is an important sensory modality in arthropods, which use externally generated vibration sources to gather information about their environment. Vibrations are subject to mechanical filtering by the legs and body, which implicates a role for morphology in modulating information flow due to the distributed and embedded nature of arthropod mechanosensors. A general problem with sensing is the separation of signal from noise. While internally generated vibrations can be useful for proprioception, they potentially obscure the small displacements generated by substrate vibrations for exteroception. Here, we use a laser vibrometry dataset quantifying the dynamic response of the tarantula Grammostola pulchra to vibrational input at 50 points across its legs and body to examine relative motion in a single axis, enabling us to infer leg biomechanics and test whether these behave rigidly as vibrations are transmitted through the body. We show that the non-rigid legs may dampen large-amplitude motion from cephalothorax/abdomen resonance—increasing signal-to-noise ratio for exteroception at their distal ends. These properties may also act to increase the robustness of vibration sensing to variation in morphological traits affecting the spider’s dynamics. As spider body plans are conserved, we argue the results are generalizable across the mechanosensitive Araneae.
- 17 June 2026
- Published by The Royal Society in Proceedings Of The Royal Society B-Biological Sciences
- Vol. 293 (2073)
Open AccessSpider leg biomechanics as an information filter for vibration sensing
Substrate-borne vibration sensing is an important sensory modality in arthropods, which use externally generated vibration sources to gather information about their environment. Vibrations are subject to mechanical filtering by the legs and body, which implicates a role for morphology in modulating information flow due to the distributed and embedded nature of arthropod mechanosensors. A general problem with sensing is the separation of signal from noise. While internally generated vibrations can be useful for proprioception, they potentially obscure the small displacements generated by substrate vibrations for exteroception. Here, we use a laser vibrometry dataset quantifying the dynamic response of the tarantula Grammostola pulchra to vibrational input at 50 points across its legs and body to examine relative motion in a single axis, enabling us to infer leg biomechanics and test whether these behave rigidly as vibrations are transmitted through the body. We show that the non-rigid legs may dampen large-amplitude motion from cephalothorax/abdomen resonance—increasing signal-to-noise ratio for exteroception at their distal ends. These properties may also act to increase the robustness of vibration sensing to variation in morphological traits affecting the spider’s dynamics. As spider body plans are conserved, we argue the results are generalizable across the mechanosensitive Araneae.
- 11 March 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 11 (112) , eadx7524
Fly motion vision maximizes signal energy transfer between mechanical input and sensor output
Insects achieve agile flight using a sensor-rich control architecture whose embodiment eliminates the need for complex computation. For example, their visual systems are tuned to detect the optic flow associated with specific self-motions, but what functional principle does this tuning embed, and how does it facilitate motor control? Here, we tested the hypothesis that evolution cotunes physics and physiology by aligning an insect’s sensors to its dynamically important modes of self-motion. Specifically, we show that the spatial tuning of the blowfly motion vision system maximizes the open-loop Hankel singular values, which quantify the flow of signal energy from gust disturbances and control inputs to sensor outputs, jointly optimizing observability and controllability. This evolutionary principle differs from the conventional engineering-design paradigm of optimizing state estimation, with implications for robotic systems combining high performance with minimal actuator usage.
- 11 March 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 11 (112) , eadx7524
Fly motion vision maximizes signal energy transfer between mechanical input and sensor output
Insects achieve agile flight using a sensor-rich control architecture whose embodiment eliminates the need for complex computation. For example, their visual systems are tuned to detect the optic flow associated with specific self-motions, but what functional principle does this tuning embed, and how does it facilitate motor control? Here, we tested the hypothesis that evolution cotunes physics and physiology by aligning an insect’s sensors to its dynamically important modes of self-motion. Specifically, we show that the spatial tuning of the blowfly motion vision system maximizes the open-loop Hankel singular values, which quantify the flow of signal energy from gust disturbances and control inputs to sensor outputs, jointly optimizing observability and controllability. This evolutionary principle differs from the conventional engineering-design paradigm of optimizing state estimation, with implications for robotic systems combining high performance with minimal actuator usage.
- Open Access
- 1 March 2026
- Published by The Royal Society in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 482 (2333)
A bio-inspired configuration and algorithm for vibration source localization and its biological implications
Vibration source localization is an interdisciplinary topic with applications in both engineering and biology. To inspire technologies for use in engineering and understand how spiders may localize a vibration source, we develop a bio-inspired vibration source localization configuration and algorithm. The algorithm first calculates leg inputs using a backward filter forward smoother algorithm with leg responses; it then estimates the source angle, source distance, substrate wave speed and decay rate through optimization, utilizing the time and amplitude relationships between the calculated leg inputs. The algorithm effectiveness is validated through simulations. Results show that the algorithm gives accurate estimation of the source angle and wave speed with varying source distance, source angle, wave speed and decay rate, with errors typically within 3 deg (absolute) and 6% (relative), respectively. The algorithm cannot estimate the source distance. To locate the position, two spider-like agents would be used collaboratively. The algorithm works well even for leg responses with low signal-to-noise ratio. Results also show that the four-leg combination which includes front and back two legs is the minimum leg requirement. Increasing the leg–substrate contact damping can improve the algorithm accuracy. These results also give us new insights into how spiders may localize a vibration source.
- 1 March 2026
- Published by The Royal Society in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Vol. 482 (2333)
Open AccessA bio-inspired configuration and algorithm for vibration source localization and its biological implications
Vibration source localization is an interdisciplinary topic with applications in both engineering and biology. To inspire technologies for use in engineering and understand how spiders may localize a vibration source, we develop a bio-inspired vibration source localization configuration and algorithm. The algorithm first calculates leg inputs using a backward filter forward smoother algorithm with leg responses; it then estimates the source angle, source distance, substrate wave speed and decay rate through optimization, utilizing the time and amplitude relationships between the calculated leg inputs. The algorithm effectiveness is validated through simulations. Results show that the algorithm gives accurate estimation of the source angle and wave speed with varying source distance, source angle, wave speed and decay rate, with errors typically within 3 deg (absolute) and 6% (relative), respectively. The algorithm cannot estimate the source distance. To locate the position, two spider-like agents would be used collaboratively. The algorithm works well even for leg responses with low signal-to-noise ratio. Results also show that the four-leg combination which includes front and back two legs is the minimum leg requirement. Increasing the leg–substrate contact damping can improve the algorithm accuracy. These results also give us new insights into how spiders may localize a vibration source.
- Open Access
- 1 April 2025
- Published by The Company of Biologists in Journal of Experimental Biology
- Vol. 228 (7)
Constraints on percussive seismic signals in a noisy environment by European fiddler crabs, Afruca tangeri
Many animals communicate using seismic vibrations. Signaller morphology, signal production method and environmental factors impose interacting constraints that may be impossible to replicate in the laboratory, making it essential to study seismic communication in situ. Here, we focused on the constraints on percussive seismic signals in European fiddler crabs (Afruca tangeri), recording a large dataset of percussive seismic signals in situ, and testing for waveform differences as a function of signaller morphology and behaviour. In addition, we aimed to characterise signal degradation and interference by seismic noise from wind and vibrated vegetation in the natural environment. We obtained over 8000 percussive seismic signal recordings, and found that although the length, rhythm and loudness of the signals all varied as a function of behaviour, their frequency content did not. Consequently, behaviours could be discriminated based on seismic recordings alone. Larger claws were only associated with louder signals in the case of claw drumming behaviours, but morphology did not affect percussive signal features otherwise. Environmental effects on percussive signals were substantial as signals attenuated significantly over distance, and wind speed was positively correlated with seismic noise, albeit independently of distance to vegetation. We conclude that percussive seismic signals are limited in their ability to convey information through frequency, but that their broadband nature is advantageous in the face of noise and frequency filtering by the substrate. In contrast, changing the amplitude and repetition rate of a percussive signal offers a simple but effective means for small animals to communicate seismically in noisy environments.
- 1 April 2025
- Published by The Company of Biologists in Journal of Experimental Biology
- Vol. 228 (7)
Open AccessConstraints on percussive seismic signals in a noisy environment by European fiddler crabs, Afruca tangeri
Many animals communicate using seismic vibrations. Signaller morphology, signal production method and environmental factors impose interacting constraints that may be impossible to replicate in the laboratory, making it essential to study seismic communication in situ. Here, we focused on the constraints on percussive seismic signals in European fiddler crabs (Afruca tangeri), recording a large dataset of percussive seismic signals in situ, and testing for waveform differences as a function of signaller morphology and behaviour. In addition, we aimed to characterise signal degradation and interference by seismic noise from wind and vibrated vegetation in the natural environment. We obtained over 8000 percussive seismic signal recordings, and found that although the length, rhythm and loudness of the signals all varied as a function of behaviour, their frequency content did not. Consequently, behaviours could be discriminated based on seismic recordings alone. Larger claws were only associated with louder signals in the case of claw drumming behaviours, but morphology did not affect percussive signal features otherwise. Environmental effects on percussive signals were substantial as signals attenuated significantly over distance, and wind speed was positively correlated with seismic noise, albeit independently of distance to vegetation. We conclude that percussive seismic signals are limited in their ability to convey information through frequency, but that their broadband nature is advantageous in the face of noise and frequency filtering by the substrate. In contrast, changing the amplitude and repetition rate of a percussive signal offers a simple but effective means for small animals to communicate seismically in noisy environments.
- 5 January 2024
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 383 (6678) , 108-113
Convergence in carnivorous pitcher plants reveals a mechanism for composite trait evolution
Composite traits involve multiple components that, only when combined, gain a new synergistic function. Thus, how they evolve remains a puzzle. We combined field experiments, microscopy, chemical analyses, and laser Doppler vibrometry with comparative phylogenetic analyses to show that two carnivorous Nepenthes pitcher plant species independently evolved similar adaptations in three distinct traits to acquire a new, composite trapping mechanism. Comparative analyses suggest that this new trait arose convergently through “spontaneous coincidence” of the required trait combination, rather than directional selection in the component traits. Our results indicate a plausible mechanism for composite trait evolution and highlight the importance of stochastic phenotypic variation as a facilitator of evolutionary novelty.
- 5 January 2024
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 383 (6678) , 108-113
Convergence in carnivorous pitcher plants reveals a mechanism for composite trait evolution
Composite traits involve multiple components that, only when combined, gain a new synergistic function. Thus, how they evolve remains a puzzle. We combined field experiments, microscopy, chemical analyses, and laser Doppler vibrometry with comparative phylogenetic analyses to show that two carnivorous Nepenthes pitcher plant species independently evolved similar adaptations in three distinct traits to acquire a new, composite trapping mechanism. Comparative analyses suggest that this new trait arose convergently through “spontaneous coincidence” of the required trait combination, rather than directional selection in the component traits. Our results indicate a plausible mechanism for composite trait evolution and highlight the importance of stochastic phenotypic variation as a facilitator of evolutionary novelty.
- Open Access
- 13 September 2023
- Published by The Royal Society in Journal of The Royal Society Interface
- Vol. 20 (206) , 20230365
Spider dynamics under vertical vibration and its implications for biological vibration sensing
Often overlooked, vibration transmission through the entire body of an animal is an important factor in understanding vibration sensing in animals. To investigate the role of dynamic properties and vibration transmission through the body, we used a modal test and lumped parameter modelling for a spider. The modal test used laser vibrometry data on a tarantula, and revealed five modes of the spider in the frequency range of 20–200 Hz. Our developed and calibrated model took into account the bounce, pitch and roll of the spider body and bounce of all the eight legs. We then performed a parametric study using this calibrated model, varying factors such as mass, inertia, leg stiffness, damping, angle and span to study what effect they had on vibration transmission. The results support that some biomechanical parameters can act as physical constraints on vibration sensing. But also, that the spider may actively control some biomechanical parameters to change the signal intensity it can sense. Furthermore, our analysis shows that the parameter changes in front and back legs have a greater influence on whole system dynamics, so may be of particular importance for active control mechanisms to facilitate biological sensing functions.
- 13 September 2023
- Published by The Royal Society in Journal of The Royal Society Interface
- Vol. 20 (206) , 20230365
Open AccessSpider dynamics under vertical vibration and its implications for biological vibration sensing
Often overlooked, vibration transmission through the entire body of an animal is an important factor in understanding vibration sensing in animals. To investigate the role of dynamic properties and vibration transmission through the body, we used a modal test and lumped parameter modelling for a spider. The modal test used laser vibrometry data on a tarantula, and revealed five modes of the spider in the frequency range of 20–200 Hz. Our developed and calibrated model took into account the bounce, pitch and roll of the spider body and bounce of all the eight legs. We then performed a parametric study using this calibrated model, varying factors such as mass, inertia, leg stiffness, damping, angle and span to study what effect they had on vibration transmission. The results support that some biomechanical parameters can act as physical constraints on vibration sensing. But also, that the spider may actively control some biomechanical parameters to change the signal intensity it can sense. Furthermore, our analysis shows that the parameter changes in front and back legs have a greater influence on whole system dynamics, so may be of particular importance for active control mechanisms to facilitate biological sensing functions.
- Open Access
- 5 February 2022
- Published by Elsevier in Arthropod Structure & Development
- Vol. 67, 101140
Slit sense organ distribution on the legs of two species of orb-weaving spider (Araneae: Araneidae)
- 5 February 2022
- Published by Elsevier in Arthropod Structure & Development
- Vol. 67, 101140
Open AccessSlit sense organ distribution on the legs of two species of orb-weaving spider (Araneae: Araneidae)
- Open Access
- 30 June 2021
- Published by The Royal Society in Proceedings Of The Royal Society B-Biological Sciences
- Vol. 288 (1953) , 20210774
Noise matters: elephants show risk-avoidance behaviour in response to human-generated seismic cues
African elephants (Loxodonta africana) use many sensory modes to gather information about their environment, including the detection of seismic, or ground-based, vibrations. Seismic information is known to include elephant-generated signals, but also potentially encompasses biotic cues that are commonly referred to as ‘noise’. To investigate seismic information transfer in elephants beyond communication, here we tested the hypothesis that wild elephants detect and discriminate between seismic vibrations that differ in their noise types, whether elephant- or human-generated. We played three types of seismic vibrations to elephants: seismic recordings of elephants (elephant-generated), white noise (human-generated) and a combined track (elephant- and human-generated). We found evidence of both detection of seismic noise and discrimination between the two treatments containing human-generated noise. In particular, we found evidence of retreat behaviour, where seismic tracks with human-generated noise caused elephants to move further away from the trial location. We conclude that seismic noise are cues that contain biologically relevant information for elephants that they can associate with risk. This expands our understanding of how elephants use seismic information, with implications for elephant sensory ecology and conservation management.
- 30 June 2021
- Published by The Royal Society in Proceedings Of The Royal Society B-Biological Sciences
- Vol. 288 (1953) , 20210774
Open AccessNoise matters: elephants show risk-avoidance behaviour in response to human-generated seismic cues
African elephants (Loxodonta africana) use many sensory modes to gather information about their environment, including the detection of seismic, or ground-based, vibrations. Seismic information is known to include elephant-generated signals, but also potentially encompasses biotic cues that are commonly referred to as ‘noise’. To investigate seismic information transfer in elephants beyond communication, here we tested the hypothesis that wild elephants detect and discriminate between seismic vibrations that differ in their noise types, whether elephant- or human-generated. We played three types of seismic vibrations to elephants: seismic recordings of elephants (elephant-generated), white noise (human-generated) and a combined track (elephant- and human-generated). We found evidence of both detection of seismic noise and discrimination between the two treatments containing human-generated noise. In particular, we found evidence of retreat behaviour, where seismic tracks with human-generated noise caused elephants to move further away from the trial location. We conclude that seismic noise are cues that contain biologically relevant information for elephants that they can associate with risk. This expands our understanding of how elephants use seismic information, with implications for elephant sensory ecology and conservation management.
- Open Access
- 11 December 2020
- Published by Frontiers Media SA in Frontiers in Ecology and Evolution
- Vol. 8
Control vs. Constraint: Understanding the Mechanisms of Vibration Transmission During Material-Bound Information Transfer
Material-bound vibrations are ubiquitous in the environment and are widely used as an information source by animals, whether they are generated by biotic or abiotic sources. The process of vibration information transfer is subject to a wide range of physical constraints, especially during the vibration transmission phase. This is because vibrations must travel through materials in the environment and body of the animal before reaching embedded mechanosensors. Morphology therefore plays a key and often overlooked role in shaping information flow. Web-building spiders are ideal organisms for studying vibration information transfer due to the level of control they have over morphological traits, both within the web (environment) and body, which can give insights for bioinspired design. Here we investigate the mechanisms governing vibration information transfer, including the relative roles of constraints and control mechanisms. We review the known and theoretical contributions of morphological and behavioral traits to vibration transmission in these spiders, and propose an interdisciplinary framework for considering the effects of these traits from a biomechanical perspective. Whereas morphological traits act as a series of springs, dampers and masses arranged in a specific geometry to influence vibration transmission, behavioral traits influence these morphologies often over small timescales in response to changing conditions. We then explore the relative roles of constraints and control mechanisms in shaping the variation of these traits at various taxonomic levels. This analysis reveals the importance of morphology modification to gain control over vibration transmission to mitigate constraints and essentially promote information transfer. In particular, we hypothesize that morphological computation is used by spiders during vibration information transfer to reduce the amount of processing required by the central nervous system (CNS); a hypothesis that can be tested experimentally in the future. We can take inspiration from how spiders control vibration transmission and apply these insights to bioinspired engineering. In particular, the role of morphological computation for vibration control could open up potential developments for soft robots, which could use multi-scale vibration sensory systems inspired by spiders to quickly and efficiently adapt to changing environments.
- 11 December 2020
- Published by Frontiers Media SA in Frontiers in Ecology and Evolution
- Vol. 8
Open AccessControl vs. Constraint: Understanding the Mechanisms of Vibration Transmission During Material-Bound Information Transfer
Material-bound vibrations are ubiquitous in the environment and are widely used as an information source by animals, whether they are generated by biotic or abiotic sources. The process of vibration information transfer is subject to a wide range of physical constraints, especially during the vibration transmission phase. This is because vibrations must travel through materials in the environment and body of the animal before reaching embedded mechanosensors. Morphology therefore plays a key and often overlooked role in shaping information flow. Web-building spiders are ideal organisms for studying vibration information transfer due to the level of control they have over morphological traits, both within the web (environment) and body, which can give insights for bioinspired design. Here we investigate the mechanisms governing vibration information transfer, including the relative roles of constraints and control mechanisms. We review the known and theoretical contributions of morphological and behavioral traits to vibration transmission in these spiders, and propose an interdisciplinary framework for considering the effects of these traits from a biomechanical perspective. Whereas morphological traits act as a series of springs, dampers and masses arranged in a specific geometry to influence vibration transmission, behavioral traits influence these morphologies often over small timescales in response to changing conditions. We then explore the relative roles of constraints and control mechanisms in shaping the variation of these traits at various taxonomic levels. This analysis reveals the importance of morphology modification to gain control over vibration transmission to mitigate constraints and essentially promote information transfer. In particular, we hypothesize that morphological computation is used by spiders during vibration information transfer to reduce the amount of processing required by the central nervous system (CNS); a hypothesis that can be tested experimentally in the future. We can take inspiration from how spiders control vibration transmission and apply these insights to bioinspired engineering. In particular, the role of morphological computation for vibration control could open up potential developments for soft robots, which could use multi-scale vibration sensory systems inspired by spiders to quickly and efficiently adapt to changing environments.
- Open Access
- 1 January 2020
- Published by The Company of Biologists in Journal of Experimental Biology
- Vol. 223 (23)
Functional flexibility in a spider's Orb Web
Web spiders rely on vibrations propagated via their web to identify, locate and capture entangled prey. Here we experimentally test the robustness of the orb weaver's predation strategy when webs are severely distorted and silk tensions are drastically altered throughout the web, a common occurrence in the wild. We assessed prey identification efficiency by comparing the spider's initial reaction times towards a fruit fly trapped in the web, we measured location efficiency by comparing times and the numbers of tugging bouts performed, and we determined capture efficiency by comparing capture times. It emerged that spiders are capable of identifying, locating and capturing prey in distorted webs albeit taking somewhat longer to do so.
- 1 January 2020
- Published by The Company of Biologists in Journal of Experimental Biology
- Vol. 223 (23)
Open AccessFunctional flexibility in a spider's Orb Web
Web spiders rely on vibrations propagated via their web to identify, locate and capture entangled prey. Here we experimentally test the robustness of the orb weaver's predation strategy when webs are severely distorted and silk tensions are drastically altered throughout the web, a common occurrence in the wild. We assessed prey identification efficiency by comparing the spider's initial reaction times towards a fruit fly trapped in the web, we measured location efficiency by comparing times and the numbers of tugging bouts performed, and we determined capture efficiency by comparing capture times. It emerged that spiders are capable of identifying, locating and capturing prey in distorted webs albeit taking somewhat longer to do so.