Andrea Padovani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andrea Padovani has a total of 475 co-authors. Here are the top co-authors by number of shared publications:
- Luca Larcher
Applied Materials, Santa Clara, USA
88 shared publications - Paolo Pavan
Dipartimento di Ingegneria “Enzo Ferrari,” Universitá di Modena e Reggio Emilia
41 shared publications - Francesco Maria Puglisi
Dipartimento di Ingegneria “Enzo Ferrari,” Universitá di Modena e Reggio Emilia
34 shared publications Luca Larcher
Applied Materials, STM, Reggio Emilia, Italy
21 shared publicationsGennadi Bersuker
SEMATECH, Albany, NY, USA
19 shared publicationsG. Bersuker
16 shared publications
Latest Publications
- 1 July 2026
- Published by Springer Nature in Nature Materials
- Vol. 25 (11) , 2019-2027
Quantum tunnelling and leakage current across two-dimensional materials
Leakage current is a physical phenomenon that critically affects the operation and reliability of mainstream electronic devices and heterostructures for diverse applications. Two-dimensional materials are being integrated into the structure of ultrascaled electronic devices, but the leakage current across them is still not well understood. Here we analyse the leakage current across hexagonal boron nitride (hBN), molybdenum disulfide and tungsten disulfide of different thicknesses, and compare it with industrial-quality SiO2/n++Si samples. The samples are analysed at the nanoscale and at the device level, and the experimental data are complemented with computational modelling assisted by technology computer-aided design and density functional theory. First, we demonstrate that the surface roughness of the bottom electrode dramatically alters the leakage current when an electric field is applied. Second, we show that in multilayer two-dimensional materials, the energy bandgap and density of atomic defects are key factors that determine the leakage current; however, in monolayer two-dimensional materials, the leakage current is mainly determined by sample thickness, understood as the electrode-to-electrode distance. Consequently, leakage current across monolayer hBN is higher than that across monolayer molybdenum disulfide and tungsten disulfide despite hBN having a bandgap nearly three times larger, due to its approximately 50% lower thickness. Third, we establish an equivalence (in terms of leakage current) between hBN and SiO2 films of different thicknesses, which can be used to predict the performance and reliability of two-dimensional-material-based nano-electronic devices, such as transistors and memristors.
- 1 July 2026
- Published by Springer Nature in Nature Materials
- Vol. 25 (11) , 2019-2027
Quantum tunnelling and leakage current across two-dimensional materials
Leakage current is a physical phenomenon that critically affects the operation and reliability of mainstream electronic devices and heterostructures for diverse applications. Two-dimensional materials are being integrated into the structure of ultrascaled electronic devices, but the leakage current across them is still not well understood. Here we analyse the leakage current across hexagonal boron nitride (hBN), molybdenum disulfide and tungsten disulfide of different thicknesses, and compare it with industrial-quality SiO2/n++Si samples. The samples are analysed at the nanoscale and at the device level, and the experimental data are complemented with computational modelling assisted by technology computer-aided design and density functional theory. First, we demonstrate that the surface roughness of the bottom electrode dramatically alters the leakage current when an electric field is applied. Second, we show that in multilayer two-dimensional materials, the energy bandgap and density of atomic defects are key factors that determine the leakage current; however, in monolayer two-dimensional materials, the leakage current is mainly determined by sample thickness, understood as the electrode-to-electrode distance. Consequently, leakage current across monolayer hBN is higher than that across monolayer molybdenum disulfide and tungsten disulfide despite hBN having a bandgap nearly three times larger, due to its approximately 50% lower thickness. Third, we establish an equivalence (in terms of leakage current) between hBN and SiO2 films of different thicknesses, which can be used to predict the performance and reliability of two-dimensional-material-based nano-electronic devices, such as transistors and memristors.
- 31 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. PP (15304388) , 1
Engineering Wake-Up-Free Ferroelectric Capacitors with Enhanced High-Temperature Reliability
We systematically explore the design space of ferroelectric hafnium–zirconium oxide (H0.5Z0.5O or HZO) heterostructures for reliable high-temperature operation. HZO films are deposited using thermal and plasma-enhanced atomic layer deposition (Th-ALD and PE-ALD) on tungsten (W) and titanium nitride (TiN) bottom electrodes (BE), while maintaining identical top electrodes. We demonstrate that PE-ALD HZO capacitors integrated with W BE exhibit wake-up-free switching up to 125 °C, along with significantly improved endurance compared to Th-ALD HZO/W devices across a wide temperature range (85–125 °C). By decoupling the contributions of the plasma-deposited HZO film and the oxidized bottom interface inherently formed during PE-ALD, we identify the oxidized W interfacial layer (WOx) as the primary factor governing endurance enhancement and wake-up suppression at elevated temperatures, while the PE-ALD HZO film provides secondary benefits in reducing wake-up. In contrast, PE-ALD HZO capacitors fabricated on TiN BE show no substantial improvement in wake-up behavior or endurance relative to Th-ALD HZO/TiN devices, despite the formation of an unintentional TiOxNy interfacial layer, and instead exhibit degraded polarization. This difference arises from the significantly weaker endurance enhancement and no wakeup suppression provided by oxidized TiN compared to oxidized W under comparable oxidation conditions. Overall, PE-ALD HZO films enable superior ferroelectric performance at elevated temperatures only when deposited on W BE, while Th-ALD HZO films remain a viable option for high-temperature operation on TiN BE. These findings clarify the interplay between deposition technique, electrode chemistry, and interfacial oxidation, and provide design guidelines for integrating ferroelectric memories into monolithic 3D systems under stringent thermal constraints.
- 31 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. PP (15304388) , 1
Engineering Wake-Up-Free Ferroelectric Capacitors with Enhanced High-Temperature Reliability
We systematically explore the design space of ferroelectric hafnium–zirconium oxide (H0.5Z0.5O or HZO) heterostructures for reliable high-temperature operation. HZO films are deposited using thermal and plasma-enhanced atomic layer deposition (Th-ALD and PE-ALD) on tungsten (W) and titanium nitride (TiN) bottom electrodes (BE), while maintaining identical top electrodes. We demonstrate that PE-ALD HZO capacitors integrated with W BE exhibit wake-up-free switching up to 125 °C, along with significantly improved endurance compared to Th-ALD HZO/W devices across a wide temperature range (85–125 °C). By decoupling the contributions of the plasma-deposited HZO film and the oxidized bottom interface inherently formed during PE-ALD, we identify the oxidized W interfacial layer (WOx) as the primary factor governing endurance enhancement and wake-up suppression at elevated temperatures, while the PE-ALD HZO film provides secondary benefits in reducing wake-up. In contrast, PE-ALD HZO capacitors fabricated on TiN BE show no substantial improvement in wake-up behavior or endurance relative to Th-ALD HZO/TiN devices, despite the formation of an unintentional TiOxNy interfacial layer, and instead exhibit degraded polarization. This difference arises from the significantly weaker endurance enhancement and no wakeup suppression provided by oxidized TiN compared to oxidized W under comparable oxidation conditions. Overall, PE-ALD HZO films enable superior ferroelectric performance at elevated temperatures only when deposited on W BE, while Th-ALD HZO films remain a viable option for high-temperature operation on TiN BE. These findings clarify the interplay between deposition technique, electrode chemistry, and interfacial oxidation, and provide design guidelines for integrating ferroelectric memories into monolithic 3D systems under stringent thermal constraints.
- 11 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. PP (00189383) , 1-7
Modeling Dielectric Breakdown in Scaled Nodes: Challenges and Perspectives
This article reviews the state of the art in dielectric breakdown (DB) modeling, with particular emphasis on recent atomistic approaches, and on the key characteristics that are expected to play a major role in enabling effective design-for-reliability of future ultra-scaled devices.
- 11 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. PP (00189383) , 1-7
Modeling Dielectric Breakdown in Scaled Nodes: Challenges and Perspectives
This article reviews the state of the art in dielectric breakdown (DB) modeling, with particular emphasis on recent atomistic approaches, and on the key characteristics that are expected to play a major role in enabling effective design-for-reliability of future ultra-scaled devices.
- Open Access
- 5 March 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (10) , 3390-3397
Enabling Radiation Hardness in Solid-State NAND Storage Utilizing a Laminated Ferroelectric Stack
NAND flash forms the core of modern solid-state storage, which is critical for data-intensive AI applications, yet charge-trap NAND suffers rapid threshold-voltage (Vth) degradation under ionizing radiation, causing reliability challenges for space and defense applications. Here we show that ferroelectric field-effect transistors (FeFETs) with laminated gate stacks offer a promising route to achieving radiation resilience in vertical NAND technology. We demonstrate that large-memory-window, vertical NAND-compatible laminated poly-silicon-channel FeFETs with an 8 nm Hf0.5Zr0.5O2/3 nm Al2O3/8 nm Hf0.5Zr0.5O2 stack retain a full memory window and robust switching up to 10 Mrad(air) of the total ionizing dose (TID). Programmed and erased states show negligible TID-induced drift after 1 Mrad(air), while only the erased state degrades by ∼2 V at 10 Mrad(air). Technology computer-aided design (TCAD) modeling attributes these asymmetric shifts to state-dependent traps. Compared to charge-trap NAND, laminated FeFETs exhibit ∼30-fold lower Vth degradation per unit dose, positioning them as superior radiation-resilient storage candidates.
- 5 March 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (10) , 3390-3397
Open AccessEnabling Radiation Hardness in Solid-State NAND Storage Utilizing a Laminated Ferroelectric Stack
NAND flash forms the core of modern solid-state storage, which is critical for data-intensive AI applications, yet charge-trap NAND suffers rapid threshold-voltage (Vth) degradation under ionizing radiation, causing reliability challenges for space and defense applications. Here we show that ferroelectric field-effect transistors (FeFETs) with laminated gate stacks offer a promising route to achieving radiation resilience in vertical NAND technology. We demonstrate that large-memory-window, vertical NAND-compatible laminated poly-silicon-channel FeFETs with an 8 nm Hf0.5Zr0.5O2/3 nm Al2O3/8 nm Hf0.5Zr0.5O2 stack retain a full memory window and robust switching up to 10 Mrad(air) of the total ionizing dose (TID). Programmed and erased states show negligible TID-induced drift after 1 Mrad(air), while only the erased state degrades by ∼2 V at 10 Mrad(air). Technology computer-aided design (TCAD) modeling attributes these asymmetric shifts to state-dependent traps. Compared to charge-trap NAND, laminated FeFETs exhibit ∼30-fold lower Vth degradation per unit dose, positioning them as superior radiation-resilient storage candidates.
- Open Access
- 4 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (4) , 1681-1691
ALD-Derived WO 3– x Leads to Nearly Wake-Up-Free Ferroelectric Hf 0.5 Zr 0.5 O 2 at Elevated Temperatures
Breaking the memory wall in advanced computing architectures will require complex 3D integration of emerging memory materials such as ferroelectricseither within the back-end-of-line (BEOL) of CMOS front-end processes or through advanced 3D packaging technologies. Achieving this integration demands that memory materials exhibit high thermal resilience, with the capability to operate reliably at elevated temperatures, such as 125°C, due to the substantial heat generated by front-end transistors. However, silicon-compatible HfO2-based ferroelectrics tend to exhibit antiferroelectric-like behavior in this temperature range, accompanied by a more pronounced wake-up effect, posing significant challenges to their thermal reliability. Here, we report that by introducing a thin tungsten oxide (WO3–x ) layerknown as an oxygen reservoirand carefully tuning its oxygen content, ultrathin Hf0.5Zr0.5O2 (5 nm) films can be made robust against the ferroelectric-to-antiferroelectric transition at elevated temperatures. This approach not only minimizes polarization loss in the pristine state but also effectively suppresses the wake-up effect, reducing the required wake-up cycles from 105 to only 10 at 125°C, a qualifying temperature for back-end memory integrated with front-end logic, as defined by the JEDEC standard. First-principles density functional theory (DFT) calculations reveal that WO3 enhances the stability of the ferroelectric orthorhombic phase (o-phase) at elevated temperatures by increasing the tetragonal-to-orthorhombic phase energy gap and promoting favorable phonon mode evolution, thereby supporting o-phase formation under both thermodynamic and kinetic constraints.
- 4 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (4) , 1681-1691
Open AccessALD-Derived WO 3– x Leads to Nearly Wake-Up-Free Ferroelectric Hf 0.5 Zr 0.5 O 2 at Elevated Temperatures
Breaking the memory wall in advanced computing architectures will require complex 3D integration of emerging memory materials such as ferroelectricseither within the back-end-of-line (BEOL) of CMOS front-end processes or through advanced 3D packaging technologies. Achieving this integration demands that memory materials exhibit high thermal resilience, with the capability to operate reliably at elevated temperatures, such as 125°C, due to the substantial heat generated by front-end transistors. However, silicon-compatible HfO2-based ferroelectrics tend to exhibit antiferroelectric-like behavior in this temperature range, accompanied by a more pronounced wake-up effect, posing significant challenges to their thermal reliability. Here, we report that by introducing a thin tungsten oxide (WO3–x ) layerknown as an oxygen reservoirand carefully tuning its oxygen content, ultrathin Hf0.5Zr0.5O2 (5 nm) films can be made robust against the ferroelectric-to-antiferroelectric transition at elevated temperatures. This approach not only minimizes polarization loss in the pristine state but also effectively suppresses the wake-up effect, reducing the required wake-up cycles from 105 to only 10 at 125°C, a qualifying temperature for back-end memory integrated with front-end logic, as defined by the JEDEC standard. First-principles density functional theory (DFT) calculations reveal that WO3 enhances the stability of the ferroelectric orthorhombic phase (o-phase) at elevated temperatures by increasing the tetragonal-to-orthorhombic phase energy gap and promoting favorable phonon mode evolution, thereby supporting o-phase formation under both thermodynamic and kinetic constraints.
- 31 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (3) , 645-648
A Tunable Capacitance ReRAM for Improvement of Dynamic Range in CMOS Image Sensors
work reports a tunable-capacitance resistive memory (TCReRAM) device. The TCReRAM uses a binary metal-oxide active-layer and exhibits strong voltage-dependent capacitance (VDC) under appropriate operating conditions. The observed VDC dynamics is characterized experimentally, and its physical origin is investigated through comprehensive multiscale simulations. The developed TCReRAM device, integrated at the floating diffusion node of a CMOS image sensor (CIS) pixel, introduces VDC that helps mitigate saturation under high illumination conditions. Pixel-level simulations further demonstrate that incorporating the TCReRAM significantly improves the dynamic range by nearly 25% compared to the existing reported Hybrid CIS, effectively addressing performance limitations across varying illumination levels.
- 31 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (3) , 645-648
A Tunable Capacitance ReRAM for Improvement of Dynamic Range in CMOS Image Sensors
work reports a tunable-capacitance resistive memory (TCReRAM) device. The TCReRAM uses a binary metal-oxide active-layer and exhibits strong voltage-dependent capacitance (VDC) under appropriate operating conditions. The observed VDC dynamics is characterized experimentally, and its physical origin is investigated through comprehensive multiscale simulations. The developed TCReRAM device, integrated at the floating diffusion node of a CMOS image sensor (CIS) pixel, introduces VDC that helps mitigate saturation under high illumination conditions. Pixel-level simulations further demonstrate that incorporating the TCReRAM significantly improves the dynamic range by nearly 25% compared to the existing reported Hybrid CIS, effectively addressing performance limitations across varying illumination levels.
- 23 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (1) , 195-204
Probing Traps in Ta 2 O 5 /Al 2 O 3 Memristive Switching Devices
- 23 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 8 (1) , 195-204
Probing Traps in Ta 2 O 5 /Al 2 O 3 Memristive Switching Devices
- Open Access
Defect-Aware Physics-Based Compact Model for Ferroelectric nvCap: From TCAD Calibration to Circuit Co-Design
Ferroelectric non-volatile capacitance-based memories enable non-destructive readout and low-power in-memory computing with 3D stacking potential. However, their limited memory window (1-10 fF/μm) requires material-device-circuit co-optimization. Existing compact models fail to capture the physics of small-signal capacitance, device variability, and cycling degradation, which are critical parameters for circuit design. In non-volatile capacitance devices, the small-signal capacitance difference of the polarization states is the key metric. The majority of the reported compact models do not incorporate any physical model of the capacitance as a function of voltage and polarization. We present a physics-based compact model that captures small-signal capacitance, interface and bulk defect contributions, and device variations through multi-scale modeling combining experimental data, TCAD simulations, and circuit validation. Based on this methodology, we show optimized memory read-out with +/- 5 mV sense margin and impact of device endurance at the circuit level. This work presents a comprehensive compact model which enables the design of selector-less arrays and 3D-stacked memories for compute-in-memory and storage memory.
Open AccessDefect-Aware Physics-Based Compact Model for Ferroelectric nvCap: From TCAD Calibration to Circuit Co-Design
Ferroelectric non-volatile capacitance-based memories enable non-destructive readout and low-power in-memory computing with 3D stacking potential. However, their limited memory window (1-10 fF/μm) requires material-device-circuit co-optimization. Existing compact models fail to capture the physics of small-signal capacitance, device variability, and cycling degradation, which are critical parameters for circuit design. In non-volatile capacitance devices, the small-signal capacitance difference of the polarization states is the key metric. The majority of the reported compact models do not incorporate any physical model of the capacitance as a function of voltage and polarization. We present a physics-based compact model that captures small-signal capacitance, interface and bulk defect contributions, and device variations through multi-scale modeling combining experimental data, TCAD simulations, and circuit validation. Based on this methodology, we show optimized memory read-out with +/- 5 mV sense margin and impact of device endurance at the circuit level. This work presents a comprehensive compact model which enables the design of selector-less arrays and 3D-stacked memories for compute-in-memory and storage memory.
- Open Access
A Dual-Memory Ferroelectric Transistor Emulating Synaptic Metaplasticity for High-Speed Reservoir Computing
The exponential growth of edge artificial intelligence demands material-focused solutions to overcome energy consumption and latency limitations when processing real-time temporal data. Physical reservoir computing (PRC) offers an energy-efficient paradigm but faces challenges due to limited device scalability and reconfigurability. Additionally, reservoir and readout layers require memory of different timescales, short-term and long-term respectively - a material challenge hindering CMOS-compatible implementations. This work demonstrates a CMOS-compatible ferroelectric transistor using hafnium-zirconium-oxide (HZO) and silicon, enabling dual-memory operation. This system exhibits non-volatile long-term memory (LTM) from ferroelectric HZO polarization and volatile short-term memory (STM) from engineered non-quasi-static (NQS) channel-charge relaxation driven by gate-source/drain overlap capacitance. Ferroelectric polarization acts as non-volatile programming of volatile dynamics: by modulating threshold voltage, the ferroelectric state deterministically switches the NQS time constant and computational behavior between paired-pulse facilitation (PPF) and depression (PPD). This establishes a generalizable material-design principle applicable to diverse ferroelectric-semiconductor heterostructures, extending beyond silicon to oxide semiconductors and heterogeneously-integrated systems. The device solves second-order nonlinear tasks with 3.69 x 10^-3 normalized error using only 16 reservoir states - ~5x reduction - achieving 20 us response time (~1000x faster) and 1.5 x 10^-7 J energy consumption, providing an immediately manufacturable pathway for neuromorphic hardware and energy-efficient edge intelligence.
Open AccessA Dual-Memory Ferroelectric Transistor Emulating Synaptic Metaplasticity for High-Speed Reservoir Computing
The exponential growth of edge artificial intelligence demands material-focused solutions to overcome energy consumption and latency limitations when processing real-time temporal data. Physical reservoir computing (PRC) offers an energy-efficient paradigm but faces challenges due to limited device scalability and reconfigurability. Additionally, reservoir and readout layers require memory of different timescales, short-term and long-term respectively - a material challenge hindering CMOS-compatible implementations. This work demonstrates a CMOS-compatible ferroelectric transistor using hafnium-zirconium-oxide (HZO) and silicon, enabling dual-memory operation. This system exhibits non-volatile long-term memory (LTM) from ferroelectric HZO polarization and volatile short-term memory (STM) from engineered non-quasi-static (NQS) channel-charge relaxation driven by gate-source/drain overlap capacitance. Ferroelectric polarization acts as non-volatile programming of volatile dynamics: by modulating threshold voltage, the ferroelectric state deterministically switches the NQS time constant and computational behavior between paired-pulse facilitation (PPF) and depression (PPD). This establishes a generalizable material-design principle applicable to diverse ferroelectric-semiconductor heterostructures, extending beyond silicon to oxide semiconductors and heterogeneously-integrated systems. The device solves second-order nonlinear tasks with 3.69 x 10^-3 normalized error using only 16 reservoir states - ~5x reduction - achieving 20 us response time (~1000x faster) and 1.5 x 10^-7 J energy consumption, providing an immediately manufacturable pathway for neuromorphic hardware and energy-efficient edge intelligence.
- 19 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (11) , 2014-2017
Trapping Dynamics and Endurance in HfO 2 -FeFETs: An Insight From Charge Pumping
We investigate endurance degradation in hafnium oxide (HfO₂)-based ferroelectric field effect transistors (FeFETs) by analyzing interface (Nit) and near-interface oxide traps (Nox) using a two-level charge pumping (CP) technique. After 10⁴ program (PG) / erase (ER) cycles at ±5 V, 100 ns, Nit increases by ~2×, and the memory window (MW) reduces from 1.2 V to 0.45 V. Temperature-dependent measurements reveal accelerated trap generation above 50 °C, with decreasing charge-pumping current (ICPmax) due to deeper oxide trap occupation. Pulse parameter tuning shows that longer rise/fall times, and shorter hold durations mitigate Nit accumulation and delay memory window collapse. The extracted average interface trap density (Dit) reaches ~4×10¹² cm⁻²eV⁻¹ after cycling. These results emphasize the role of trap engineering in improving FeFET endurance for scaled non-volatile memory applications.
- 19 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (11) , 2014-2017
Trapping Dynamics and Endurance in HfO 2 -FeFETs: An Insight From Charge Pumping
We investigate endurance degradation in hafnium oxide (HfO₂)-based ferroelectric field effect transistors (FeFETs) by analyzing interface (Nit) and near-interface oxide traps (Nox) using a two-level charge pumping (CP) technique. After 10⁴ program (PG) / erase (ER) cycles at ±5 V, 100 ns, Nit increases by ~2×, and the memory window (MW) reduces from 1.2 V to 0.45 V. Temperature-dependent measurements reveal accelerated trap generation above 50 °C, with decreasing charge-pumping current (ICPmax) due to deeper oxide trap occupation. Pulse parameter tuning shows that longer rise/fall times, and shorter hold durations mitigate Nit accumulation and delay memory window collapse. The extracted average interface trap density (Dit) reaches ~4×10¹² cm⁻²eV⁻¹ after cycling. These results emphasize the role of trap engineering in improving FeFET endurance for scaled non-volatile memory applications.