Yashraj Kulkarni
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yashraj Kulkarni has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Shina Caroline Lynn Kamerlin
School of Chemistry and Biochemistry, Georgia Institute of Technology, Atlanta, USA
15 shared publications - Birgit Strodel
Heinrich Heine University Düsseldorf
3 shared publications - John P. Richard
University at Buffalo, SUNY
3 shared publications - Qinghua Liao
Departament de Química Inorgànica i Orgànica & IQTCUB, Universitat de Barcelona, Martí i Franquès 1, 08028 Barcelona, Spain
3 shared publications Tina L. Amyes
Department of Chemistry, University at Buffalo, SUNY, Buffalo, New York 14260-3000, United States
3 shared publicationsAstrid Gräslund
Department of Biochemistry and Biophysics, Arrhenius Laboratories, Stockholm University, 106 91 Stockholm, Sweden
2 shared publications
Latest Publications
- Open Access
- 8 January 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-13
Structural basis of THC analog activity at the Cannabinoid 1 receptor
Tetrahydrocannabinol (THC) is the principal psychoactive compound derived from the cannabis plant Cannabis sativa and approved for emetic conditions, appetite stimulation and sleep apnea relief. THC’s psychoactive actions are mediated primarily by the cannabinoid receptor CB1. Here, we determine the cryo-EM structure of HU210, a THC analog and widely used tool compound, bound to CB1 and its primary transducer, Gi1. We leverage this structure for docking and 1000 ns molecular dynamics simulations of THC and 10 structural analogs delineating their spatiotemporal interactions at the molecular level. Furthermore, we pharmacologically profile their recruitment of Gi and β-arrestins and reversibility of binding from an active complex. By combining detailed CB1 structural information with molecular models and signaling data we uncover the differential spatiotemporal interactions these ligands make to receptors governing potency, efficacy, bias and kinetics. This may help explain the actions of abused substances, advance fundamental receptor activation studies and design better medicines.
- 8 January 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-13
Open AccessStructural basis of THC analog activity at the Cannabinoid 1 receptor
Tetrahydrocannabinol (THC) is the principal psychoactive compound derived from the cannabis plant Cannabis sativa and approved for emetic conditions, appetite stimulation and sleep apnea relief. THC’s psychoactive actions are mediated primarily by the cannabinoid receptor CB1. Here, we determine the cryo-EM structure of HU210, a THC analog and widely used tool compound, bound to CB1 and its primary transducer, Gi1. We leverage this structure for docking and 1000 ns molecular dynamics simulations of THC and 10 structural analogs delineating their spatiotemporal interactions at the molecular level. Furthermore, we pharmacologically profile their recruitment of Gi and β-arrestins and reversibility of binding from an active complex. By combining detailed CB1 structural information with molecular models and signaling data we uncover the differential spatiotemporal interactions these ligands make to receptors governing potency, efficacy, bias and kinetics. This may help explain the actions of abused substances, advance fundamental receptor activation studies and design better medicines.
- 11 September 2019
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 141 (40) , 16139-16150
Uncovering the Role of Key Active-Site Side Chains in Catalysis: An Extended Brønsted Relationship for Substrate Deprotonation Catalyzed by Wild-Type and Variants of Triosephosphate Isomerase
We report results of detailed empirical valence bond simulations that model the effect of several amino acid substitutions on the thermodynamic (ΔG°) and kinetic activation (ΔG⧧) barriers to deprotonation of dihydroxyacetone phosphate (DHAP) and d-glyceraldehyde 3-phosphate (GAP) bound to wild-type triosephosphate isomerase (TIM), as well as to the K12G, E97A, E97D, E97Q, K12G/E97A, I170A, L230A, I170A/L230A, and P166A variants of this enzyme. The EVB simulations model the observed effect of the P166A mutation on protein structure. The E97A, E97Q, and E97D mutations of the conserved E97 side chain result in ≤1.0 kcal mol–1 decreases in the activation barrier for substrate deprotonation. The agreement between experimental and computed activation barriers is within ±1 kcal mol–1, with a strong linear correlation between ΔG⧧ and ΔG° for all 11 variants, with slopes β = 0.73 (R2 = 0.994) and β = 0.74 (R2 = 0.995) for the deprotonation of DHAP and GAP, respectively. These Brønsted-type correlations show that the amino acid side chains examined in this study function to reduce the standard-state Gibbs free energy of reaction for deprotonation of the weak α-carbonyl carbon acid substrate to form the enediolate phosphate reaction intermediate. TIM utilizes the cationic side chain of K12 to provide direct electrostatic stabilization of the enolate oxyanion, and the nonpolar side chains of P166, I170, and L230 are utilized for the construction of an active-site cavity that provides optimal stabilization of the enediolate phosphate intermediate relative to the carbon acid substrate.
- 11 September 2019
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 141 (40) , 16139-16150
Uncovering the Role of Key Active-Site Side Chains in Catalysis: An Extended Brønsted Relationship for Substrate Deprotonation Catalyzed by Wild-Type and Variants of Triosephosphate Isomerase
We report results of detailed empirical valence bond simulations that model the effect of several amino acid substitutions on the thermodynamic (ΔG°) and kinetic activation (ΔG⧧) barriers to deprotonation of dihydroxyacetone phosphate (DHAP) and d-glyceraldehyde 3-phosphate (GAP) bound to wild-type triosephosphate isomerase (TIM), as well as to the K12G, E97A, E97D, E97Q, K12G/E97A, I170A, L230A, I170A/L230A, and P166A variants of this enzyme. The EVB simulations model the observed effect of the P166A mutation on protein structure. The E97A, E97Q, and E97D mutations of the conserved E97 side chain result in ≤1.0 kcal mol–1 decreases in the activation barrier for substrate deprotonation. The agreement between experimental and computed activation barriers is within ±1 kcal mol–1, with a strong linear correlation between ΔG⧧ and ΔG° for all 11 variants, with slopes β = 0.73 (R2 = 0.994) and β = 0.74 (R2 = 0.995) for the deprotonation of DHAP and GAP, respectively. These Brønsted-type correlations show that the amino acid side chains examined in this study function to reduce the standard-state Gibbs free energy of reaction for deprotonation of the weak α-carbonyl carbon acid substrate to form the enediolate phosphate reaction intermediate. TIM utilizes the cationic side chain of K12 to provide direct electrostatic stabilization of the enolate oxyanion, and the nonpolar side chains of P166, I170, and L230 are utilized for the construction of an active-site cavity that provides optimal stabilization of the enediolate phosphate intermediate relative to the carbon acid substrate.
- 15 May 2019
- Published by H1 Connect
- Vol. 141 (5)
Faculty Opinions recommendation of Interplay between Conformational Entropy and Solvation Entropy in Protein-Ligand Binding.
Understanding the driving forces underlying molecular recognition is of fundamental importance in chemistry and biology. The challenge is to unravel the binding thermodynamics into separate contributions and to interpret these in molecular terms. Entropic contributions to the free energy of binding are particularly difficult to assess in this regard. Here we pinpoint the molecular determinants underlying differences in ligand affinity to the carbohydrate recognition domain of galectin-3, using a combination of isothermal titration calorimetry, X-ray crystallography, NMR relaxation, and molecular dynamics simulations followed by conformational entropy and grid inhomogeneous solvation theory (GIST) analyses. Using a pair of diastereomeric ligands that have essentially identical chemical potential in the unbound state, we reduced the problem of dissecting the thermodynamics to a comparison of the two protein-ligand complexes. While the free energies of binding are nearly equal for the R and S diastereomers, greater differences are observed for the enthalpy and entropy, which consequently exhibit compensatory behavior, ΔΔ H°(R - S) = -5 ± 1 kJ/mol and - TΔΔ S°(R - S) = 3 ± 1 kJ/mol. NMR relaxation experiments and molecular dynamics simulations indicate that the protein in complex with the S-stereoisomer has greater conformational entropy than in the R-complex. GIST calculations reveal additional, but smaller, contributions from solvation entropy, again in favor of the S-complex. Thus, conformational entropy apparently dominates over solvation entropy in dictating the difference in the overall entropy of binding. This case highlights an interplay between conformational entropy and solvation entropy, pointing to both opportunities and challenges in drug design.
- 15 May 2019
- Published by H1 Connect
- Vol. 141 (5)
Faculty Opinions recommendation of Interplay between Conformational Entropy and Solvation Entropy in Protein-Ligand Binding.
Understanding the driving forces underlying molecular recognition is of fundamental importance in chemistry and biology. The challenge is to unravel the binding thermodynamics into separate contributions and to interpret these in molecular terms. Entropic contributions to the free energy of binding are particularly difficult to assess in this regard. Here we pinpoint the molecular determinants underlying differences in ligand affinity to the carbohydrate recognition domain of galectin-3, using a combination of isothermal titration calorimetry, X-ray crystallography, NMR relaxation, and molecular dynamics simulations followed by conformational entropy and grid inhomogeneous solvation theory (GIST) analyses. Using a pair of diastereomeric ligands that have essentially identical chemical potential in the unbound state, we reduced the problem of dissecting the thermodynamics to a comparison of the two protein-ligand complexes. While the free energies of binding are nearly equal for the R and S diastereomers, greater differences are observed for the enthalpy and entropy, which consequently exhibit compensatory behavior, ΔΔ H°(R - S) = -5 ± 1 kJ/mol and - TΔΔ S°(R - S) = 3 ± 1 kJ/mol. NMR relaxation experiments and molecular dynamics simulations indicate that the protein in complex with the S-stereoisomer has greater conformational entropy than in the R-complex. GIST calculations reveal additional, but smaller, contributions from solvation entropy, again in favor of the S-complex. Thus, conformational entropy apparently dominates over solvation entropy in dictating the difference in the overall entropy of binding. This case highlights an interplay between conformational entropy and solvation entropy, pointing to both opportunities and challenges in drug design.
- Open Access
- 22 January 2019
- Published by Springer Nature in Nature Communications
- Vol. 10 (1) , 1-13
Structural consequence of the most frequently recurring cancer-associated substitution in DNA polymerase ε
The most frequently recurring cancer-associated DNA polymerase ε (Pol ε) mutation is a P286R substitution in the exonuclease domain. While originally proposed to increase genome instability by disrupting exonucleolytic proofreading, the P286R variant was later found to be significantly more pathogenic than Pol ε proofreading deficiency per se. The mechanisms underlying its stronger impact remained unclear. Here we report the crystal structure of the yeast orthologue, Pol ε−P301R, complexed with DNA and an incoming dNTP. Structural changes in the protein are confined to the exonuclease domain, with R301 pointing towards the exonuclease site. Molecular dynamics simulations suggest that R301 interferes with DNA binding to the exonuclease site, an outcome not observed with the exonuclease-inactive Pol ε−D290A,E292A variant lacking the catalytic residues. These results reveal a distinct mechanism of exonuclease inactivation by the P301R substitution and a likely basis for its dramatically higher mutagenic and tumorigenic effects.
- 22 January 2019
- Published by Springer Nature in Nature Communications
- Vol. 10 (1) , 1-13
Open AccessStructural consequence of the most frequently recurring cancer-associated substitution in DNA polymerase ε
The most frequently recurring cancer-associated DNA polymerase ε (Pol ε) mutation is a P286R substitution in the exonuclease domain. While originally proposed to increase genome instability by disrupting exonucleolytic proofreading, the P286R variant was later found to be significantly more pathogenic than Pol ε proofreading deficiency per se. The mechanisms underlying its stronger impact remained unclear. Here we report the crystal structure of the yeast orthologue, Pol ε−P301R, complexed with DNA and an incoming dNTP. Structural changes in the protein are confined to the exonuclease domain, with R301 pointing towards the exonuclease site. Molecular dynamics simulations suggest that R301 interferes with DNA binding to the exonuclease site, an outcome not observed with the exonuclease-inactive Pol ε−D290A,E292A variant lacking the catalytic residues. These results reveal a distinct mechanism of exonuclease inactivation by the P301R substitution and a likely basis for its dramatically higher mutagenic and tumorigenic effects.
- 1 January 2019
- Published by Elsevier
- Vol. 53, 69-104
Computational physical organic chemistry using the empirical valence bond approach
- 1 January 2019
- Published by Elsevier
- Vol. 53, 69-104
Computational physical organic chemistry using the empirical valence bond approach
- Open Access
- 26 October 2018
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 140 (46) , 15889-15903
Loop Motion in Triosephosphate Isomerase Is Not a Simple Open and Shut Case
Conformational changes are crucial for the catalytic action of many enzymes. A prototypical and well-studied example is loop opening and closure in triosephosphate isomerase (TIM), which is thought to determine the rate of catalytic turnover in many circumstances. Specifically, TIM loop 6 “grips” the phosphodianion of the substrate and, together with a change in loop 7, sets up the TIM active site for efficient catalysis. Crystal structures of TIM typically show an open or a closed conformation of loop 6, with the tip of the loop moving ∼7 Å between conformations. Many studies have interpreted this motion as a two-state, rigid-body transition. Here, we use extensive molecular dynamics simulations, with both conventional and enhanced sampling techniques, to analyze loop motion in apo and substrate-bound TIM in detail, using five crystal structures of the dimeric TIM from Saccharomyces cerevisiae. We find that loop 6 is highly flexible and samples multiple conformational states. Empirical valence bond simulations of the first reaction step show that slight displacements away from the fully closed-loop conformation can be sufficient to abolish most of the catalytic activity; full closure is required for efficient reaction. The conformational change of the loops in TIM is thus not a simple “open and shut” case and is crucial for its catalytic action. Our detailed analysis of loop motion in a highly efficient enzyme highlights the complexity of loop conformational changes and their role in biological catalysis.
- 26 October 2018
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 140 (46) , 15889-15903
Open AccessLoop Motion in Triosephosphate Isomerase Is Not a Simple Open and Shut Case
Conformational changes are crucial for the catalytic action of many enzymes. A prototypical and well-studied example is loop opening and closure in triosephosphate isomerase (TIM), which is thought to determine the rate of catalytic turnover in many circumstances. Specifically, TIM loop 6 “grips” the phosphodianion of the substrate and, together with a change in loop 7, sets up the TIM active site for efficient catalysis. Crystal structures of TIM typically show an open or a closed conformation of loop 6, with the tip of the loop moving ∼7 Å between conformations. Many studies have interpreted this motion as a two-state, rigid-body transition. Here, we use extensive molecular dynamics simulations, with both conventional and enhanced sampling techniques, to analyze loop motion in apo and substrate-bound TIM in detail, using five crystal structures of the dimeric TIM from Saccharomyces cerevisiae. We find that loop 6 is highly flexible and samples multiple conformational states. Empirical valence bond simulations of the first reaction step show that slight displacements away from the fully closed-loop conformation can be sufficient to abolish most of the catalytic activity; full closure is required for efficient reaction. The conformational change of the loops in TIM is thus not a simple “open and shut” case and is crucial for its catalytic action. Our detailed analysis of loop motion in a highly efficient enzyme highlights the complexity of loop conformational changes and their role in biological catalysis.
- 23 April 2018
- Published by American Chemical Society (ACS) in ACS Chemical Neuroscience
- Vol. 9 (7) , 1680-1692
Amyloid-β Peptide Interactions with Amphiphilic Surfactants: Electrostatic and Hydrophobic Effects
The amphiphilic nature of the amyloid-β (Aβ) peptide associated with Alzheimer’s disease facilitates various interactions with biomolecules such as lipids and proteins, with effects on both structure and toxicity of the peptide. Here, we investigate these peptide-amphiphile interactions by experimental and computational studies of Aβ(1-40) in the presence of surfactants with varying physico-chemical properties. Our findings indicate that electrostatic peptide-surfactant interactions are required for co-clustering and structure induction in the peptide and that the strength of the interaction depends on the surfactant net charge. Both aggregation-prone peptide-rich co-clusters and stable surfactant-rich co-clusters can form. Only Aβ(1-40) monomers, but not oligomers, are inserted into surfactant micelles in this surfactant-rich state. Surfactant head group charge is suggested to be important as electrostatic peptide-surfactant interactions on the micellar surface seems to be an initiating step towards insertion. Thus, no peptide insertion or change in peptide secondary structure is observed using a non-ionic surfactant. The hydrophobic peptide- surfactant interactions instead stabilize the Aβ monomer, possibly by preventing self-interaction between the peptide core and C- terminus, thereby effectively inhibiting the peptide aggregation process. These findings give increased understanding regarding the molecular driving forces for Aβ aggregation, and the peptide interaction with amphiphilic biomolecules.
- 23 April 2018
- Published by American Chemical Society (ACS) in ACS Chemical Neuroscience
- Vol. 9 (7) , 1680-1692
Amyloid-β Peptide Interactions with Amphiphilic Surfactants: Electrostatic and Hydrophobic Effects
The amphiphilic nature of the amyloid-β (Aβ) peptide associated with Alzheimer’s disease facilitates various interactions with biomolecules such as lipids and proteins, with effects on both structure and toxicity of the peptide. Here, we investigate these peptide-amphiphile interactions by experimental and computational studies of Aβ(1-40) in the presence of surfactants with varying physico-chemical properties. Our findings indicate that electrostatic peptide-surfactant interactions are required for co-clustering and structure induction in the peptide and that the strength of the interaction depends on the surfactant net charge. Both aggregation-prone peptide-rich co-clusters and stable surfactant-rich co-clusters can form. Only Aβ(1-40) monomers, but not oligomers, are inserted into surfactant micelles in this surfactant-rich state. Surfactant head group charge is suggested to be important as electrostatic peptide-surfactant interactions on the micellar surface seems to be an initiating step towards insertion. Thus, no peptide insertion or change in peptide secondary structure is observed using a non-ionic surfactant. The hydrophobic peptide- surfactant interactions instead stabilize the Aβ monomer, possibly by preventing self-interaction between the peptide core and C- terminus, thereby effectively inhibiting the peptide aggregation process. These findings give increased understanding regarding the molecular driving forces for Aβ aggregation, and the peptide interaction with amphiphilic biomolecules.
- Open Access
- 8 March 2018
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 140 (11) , 3854-3857
Role of Ligand-Driven Conformational Changes in Enzyme Catalysis: Modeling the Reactivity of the Catalytic Cage of Triosephosphate Isomerase
We have previously performed empirical valence bond calculations of the kinetic activation barriers, ∆G‡calc, for the deprotonation of complexes between TIM and the whole substrate glyceraldehyde-3-phosphate (GAP, Kulkarni et al. J. Am. Chem. Soc. 2017 , 139, 10514-10525). We now extend this work to also study the deprotonation of the substrate pieces glycolaldehyde (GA) and GA•HPi [HPi = phosphite dianion]. Our combined calculations provide activation barriers, ∆G‡calc, for the TIM-catalyzed deprotonation of GAP (12.9±0.8 kcal∙mol-1), of the substrate piece GA (15.0±2.4 kcal∙mol-1), and of the pieces GA•HPi (15.5±3.5 kcal∙mol-1). The effect of bound dianion on ∆G‡calc is small (≤ 2.6 kcal∙mol-1), in comparison to the much larger 12 kcal∙mol-1 and 5.8 kcal∙mol-1 intrinsic phosphodianion and phosphite dianion binding energy utilized to stabilize the transition states for TIM-catalyzed deprotonation of GAP and GA•HPi, respectively. This shows that the dianion binding energy is essentially fully expressed at our protein model for the Michaelis complex, where it is utilized to drive an activating change in enzyme conformation. The results represent an example of the synergistic use of results from experiments and calculations to advance our understanding of enzymatic reaction mechanisms.
- 8 March 2018
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 140 (11) , 3854-3857
Open AccessRole of Ligand-Driven Conformational Changes in Enzyme Catalysis: Modeling the Reactivity of the Catalytic Cage of Triosephosphate Isomerase
We have previously performed empirical valence bond calculations of the kinetic activation barriers, ∆G‡calc, for the deprotonation of complexes between TIM and the whole substrate glyceraldehyde-3-phosphate (GAP, Kulkarni et al. J. Am. Chem. Soc. 2017 , 139, 10514-10525). We now extend this work to also study the deprotonation of the substrate pieces glycolaldehyde (GA) and GA•HPi [HPi = phosphite dianion]. Our combined calculations provide activation barriers, ∆G‡calc, for the TIM-catalyzed deprotonation of GAP (12.9±0.8 kcal∙mol-1), of the substrate piece GA (15.0±2.4 kcal∙mol-1), and of the pieces GA•HPi (15.5±3.5 kcal∙mol-1). The effect of bound dianion on ∆G‡calc is small (≤ 2.6 kcal∙mol-1), in comparison to the much larger 12 kcal∙mol-1 and 5.8 kcal∙mol-1 intrinsic phosphodianion and phosphite dianion binding energy utilized to stabilize the transition states for TIM-catalyzed deprotonation of GAP and GA•HPi, respectively. This shows that the dianion binding energy is essentially fully expressed at our protein model for the Michaelis complex, where it is utilized to drive an activating change in enzyme conformation. The results represent an example of the synergistic use of results from experiments and calculations to advance our understanding of enzymatic reaction mechanisms.
- 7 December 2017
- Published by H1 Connect
Faculty Opinions recommendation of Rational design of proteins that exchange on functional timescales.
Although many in silico protein design efforts have been made to improve the functional characteristics of proteins, there has been less focus on incorporating the regulation of protein dynamics into the design process. This article introduces a novel method called meta-multistate design (meta-MSD), which attempts to plug the gaps pertaining to dynamics in current computational protein design (CPD) approaches. Specifically, it predicts protein sequences that can spontaneously change their conformations between predefined states. Here, the authors describe an interesting approach to predicting the static and dynamic natures of proteins by identifying the number and stability of conformational states in which a certain protein sequence can exist. Streptococcal protein G domain β1 has been used for validating the method. In this protein, W43 was chosen as a target residue to design the conformational exchange between the “buried” and “solvent-accessible” states along with a transition state that would occur at functional timescales. The designed proteins showed an exchange of folds, the barrier to which was also estimated. meta-MSD has been presented as a method that can push the frontiers of CPD with respect to designing functionally diverse proteins. This is an important development considering that there is increasing evidence for the fact that altered conformational dynamics can significantly affect the function of a protein. Therefore, it can propel more effective design approaches to obtain proteins that function more efficiently, thereby resembling their natural counterparts.
- 7 December 2017
- Published by H1 Connect
Faculty Opinions recommendation of Rational design of proteins that exchange on functional timescales.
Although many in silico protein design efforts have been made to improve the functional characteristics of proteins, there has been less focus on incorporating the regulation of protein dynamics into the design process. This article introduces a novel method called meta-multistate design (meta-MSD), which attempts to plug the gaps pertaining to dynamics in current computational protein design (CPD) approaches. Specifically, it predicts protein sequences that can spontaneously change their conformations between predefined states. Here, the authors describe an interesting approach to predicting the static and dynamic natures of proteins by identifying the number and stability of conformational states in which a certain protein sequence can exist. Streptococcal protein G domain β1 has been used for validating the method. In this protein, W43 was chosen as a target residue to design the conformational exchange between the “buried” and “solvent-accessible” states along with a transition state that would occur at functional timescales. The designed proteins showed an exchange of folds, the barrier to which was also estimated. meta-MSD has been presented as a method that can push the frontiers of CPD with respect to designing functionally diverse proteins. This is an important development considering that there is increasing evidence for the fact that altered conformational dynamics can significantly affect the function of a protein. Therefore, it can propel more effective design approaches to obtain proteins that function more efficiently, thereby resembling their natural counterparts.
- 13 September 2017
- Published by H1 Connect
Faculty Opinions recommendation of Long-Term Persistence of Bi-functionality Contributes to the Robustness of Microbial Life through Exaptation.
This study gives a good account of how lack of selection pressure over very long time-spans could lead to the preservation of bi-functionality in modern enzymes. The sugar isomerase HisA is chosen as an example as some of its variants are also known to possess low TrpF activity. PriA, a homolog of HisA capable of catalyzing both HisA and TrpF reactions, is also included in the study. A variety of structural bioinformatics analyses have been performed to know the distribution of PriA-like enzymes within the bacterial kingdom, followed by computational reconstruction of the ancestral variants of HisA. Conserved motifs in the active site of the enzymes of interest – both extant and ancestral – have been compared and residue(s) key for bi-functionality identified. The authors have reconstructed 2 to 2.5 billion years old bi-functional ancestral enzymes from extant HisA sequences. They make important conclusions about the evolutionary trajectories of modern day HisA in different phyla of bacteria. Further, they also state that this bi-functionality exists in modern day enzymes because it doesn’t affect the fitness of the organism, thus making it metabolically robust. Overall, the article summarizes all the results in a cohesive manner. It also opens up new avenues for similar investigations on other enzymes of this nature.
- 13 September 2017
- Published by H1 Connect
Faculty Opinions recommendation of Long-Term Persistence of Bi-functionality Contributes to the Robustness of Microbial Life through Exaptation.
This study gives a good account of how lack of selection pressure over very long time-spans could lead to the preservation of bi-functionality in modern enzymes. The sugar isomerase HisA is chosen as an example as some of its variants are also known to possess low TrpF activity. PriA, a homolog of HisA capable of catalyzing both HisA and TrpF reactions, is also included in the study. A variety of structural bioinformatics analyses have been performed to know the distribution of PriA-like enzymes within the bacterial kingdom, followed by computational reconstruction of the ancestral variants of HisA. Conserved motifs in the active site of the enzymes of interest – both extant and ancestral – have been compared and residue(s) key for bi-functionality identified. The authors have reconstructed 2 to 2.5 billion years old bi-functional ancestral enzymes from extant HisA sequences. They make important conclusions about the evolutionary trajectories of modern day HisA in different phyla of bacteria. Further, they also state that this bi-functionality exists in modern day enzymes because it doesn’t affect the fitness of the organism, thus making it metabolically robust. Overall, the article summarizes all the results in a cohesive manner. It also opens up new avenues for similar investigations on other enzymes of this nature.