Marcella Iannuzzi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Marcella Iannuzzi has a total of 341 co-authors. Here are the top co-authors by number of shared publications:
- Greta Ricarda Patzke
University of Zürich
12 shared publications - Jürg Hutter
University of Zürich
10 shared publications - Stanley David Tilley
Department of Chemistry, University of Zurich, Winterthurerstrasse 190, Zurich 8057, Switzerland
10 shared publications - Vladimir V. Rybkin
Department of Chemistry, University of Zürich, Zürich, Switzerland
10 shared publications - Gabriele Tocci
Department of Chemistry, Universität Zürich , 8057 Zürich
9 shared publications - Jinggang Lan
Shenzhen University of Advanced Technology
9 shared publications
Latest Publications
- Open Access
- 4 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Linear-response TDDFT simulations of K-edge resonant inelastic X-ray scattering in extended systems
We present an implementation for the calculation of K-edge resonant inelastic X-ray scattering spectra based on time-dependent density functional theory in the CP2K package. The method evaluates the Kramers-Heisenberg cross section from transition dipole moments connecting the ground state, core-excited intermediate states, and valence-excited final states. The present implementation combines the existing linear response time-dependent density functional theory modules (XAS-TDP and TDDFT) within a unified framework. The resulting approach is computationally efficient and well suited for condensed-phase applications in combination with ab initio molecular dynamics. The implementation is validated against experiment and established reference calculations for gas-phase water and methanol at the oxygen K-edge. Its applicability to realistic condensed-phase systems is then demonstrated for crystalline kaolinite at the oxygen K-edge, and for aqueous ammonia at the nitrogen K-edge, where representative configurations are sampled from ab initio molecular dynamics trajectories.
- 4 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessLinear-response TDDFT simulations of K-edge resonant inelastic X-ray scattering in extended systems
We present an implementation for the calculation of K-edge resonant inelastic X-ray scattering spectra based on time-dependent density functional theory in the CP2K package. The method evaluates the Kramers-Heisenberg cross section from transition dipole moments connecting the ground state, core-excited intermediate states, and valence-excited final states. The present implementation combines the existing linear response time-dependent density functional theory modules (XAS-TDP and TDDFT) within a unified framework. The resulting approach is computationally efficient and well suited for condensed-phase applications in combination with ab initio molecular dynamics. The implementation is validated against experiment and established reference calculations for gas-phase water and methanol at the oxygen K-edge. Its applicability to realistic condensed-phase systems is then demonstrated for crystalline kaolinite at the oxygen K-edge, and for aqueous ammonia at the nitrogen K-edge, where representative configurations are sampled from ab initio molecular dynamics trajectories.
- 17 August 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (34) , 9823-9830
Soret Band Splitting as an Optical Fingerprint of Qubit Architecture in Spin-Active Porphyrin Dimers
The Soret band splitting of meso–meso-linked porphyrin dimers provides a quantitative optical signature of heterometallic two-qubit architecture. Time-dependent density functional theory calculations on [VO(TrPP)]2 and [Cu(TrPP)]2 (TrPP = 5,10,15-triphenylporphyrinate) show that the homodimer splitting vanishes at the orthogonal geometry, where the frontier a2-derived HOMOs are degenerate, producing a symmetry-protected node in excitonic coupling. In contrast, the heterodimer [VO(TrPP)–Cu(TrPP)] retains a two-peak Soret structure in orthogonal geometry because of the intrinsic reduction of the symmetry that cannot be removed by rotation. A two-chromophore exciton model reproduces this splitting quantitatively. Broken-symmetry DFT yields a superexchange magnetic coupling, |J| ≈ 10–2 cm–1, 5 orders of magnitude below the Soret splitting, confirming that optical and magnetic interactions are decoupled. The Soret profile and J together provide independent, complementary observables to characterize porphyrin-based two-qubit architectures.
- 17 August 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (34) , 9823-9830
Soret Band Splitting as an Optical Fingerprint of Qubit Architecture in Spin-Active Porphyrin Dimers
The Soret band splitting of meso–meso-linked porphyrin dimers provides a quantitative optical signature of heterometallic two-qubit architecture. Time-dependent density functional theory calculations on [VO(TrPP)]2 and [Cu(TrPP)]2 (TrPP = 5,10,15-triphenylporphyrinate) show that the homodimer splitting vanishes at the orthogonal geometry, where the frontier a2-derived HOMOs are degenerate, producing a symmetry-protected node in excitonic coupling. In contrast, the heterodimer [VO(TrPP)–Cu(TrPP)] retains a two-peak Soret structure in orthogonal geometry because of the intrinsic reduction of the symmetry that cannot be removed by rotation. A two-chromophore exciton model reproduces this splitting quantitatively. Broken-symmetry DFT yields a superexchange magnetic coupling, |J| ≈ 10–2 cm–1, 5 orders of magnitude below the Soret splitting, confirming that optical and magnetic interactions are decoupled. The Soret profile and J together provide independent, complementary observables to characterize porphyrin-based two-qubit architectures.
- 25 June 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (27) , 9411-9423
Computationally Assisted XPS Allows the Decoding of Surface Intermediates Involved in Ethylene Epoxidation
- 25 June 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (27) , 9411-9423
Computationally Assisted XPS Allows the Decoding of Surface Intermediates Involved in Ethylene Epoxidation
- 11 June 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 137 (5)
Timing ultrafast charge transfer via Fano interference beyond the core-hole clock
- 11 June 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 137 (5)
Timing ultrafast charge transfer via Fano interference beyond the core-hole clock
- 28 May 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 22 (11) , 5761-5769
A Flexible and Generalized Constant-Potential Framework in i-PI
Constant-potential molecular dynamics is essential for realistic simulations of electrochemical interfaces under Operando conditions. Although various constant-potential frameworks exist, most are tightly coupled to specific electronic-structure codes or numerical architectures, limiting portability and extensibility─especially for codes constrained to integer electron numbers. Here, we present a flexible constant-potential framework implemented in the i-PI driver, interfacing with multiple density functional theory (DFT) engines and, in principle, extensible to constant-potential machine-learning potentials. The method regulates and samples the electronic chemical potential by introducing an explicit electronic degree of freedom and a dedicated potentiostat module in i-PI. To bypass the integer-electron constraint without modifying the underlying DFT code, we employ a mixed-Hamiltonian interpolation scheme: two adjacent integer-charge clients are run in parallel, and their energies, forces, and electronic chemical potentials (Fermi level/work function) are linearly interpolated to obtain an effective fractional-charge description. We validate the method on a one-dimensional asymmetric double-well model and an Al(111) surface, demonstrating stable potential control and well-behaved charge fluctuations. Finally, we couple constant-potential ab initio molecular dynamics (AIMD) with enhanced sampling to study CO2 reduction on NiN4-doped graphene, enabling efficient characterization of potential-dependent reactivity and free-energy landscapes. Overall, this framework provides a portable and scalable platform for conducting rigorous constant-potential simulations across diverse electronic-structure clients and, in principle, machine-learning potentials.
- 28 May 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 22 (11) , 5761-5769
A Flexible and Generalized Constant-Potential Framework in i-PI
Constant-potential molecular dynamics is essential for realistic simulations of electrochemical interfaces under Operando conditions. Although various constant-potential frameworks exist, most are tightly coupled to specific electronic-structure codes or numerical architectures, limiting portability and extensibility─especially for codes constrained to integer electron numbers. Here, we present a flexible constant-potential framework implemented in the i-PI driver, interfacing with multiple density functional theory (DFT) engines and, in principle, extensible to constant-potential machine-learning potentials. The method regulates and samples the electronic chemical potential by introducing an explicit electronic degree of freedom and a dedicated potentiostat module in i-PI. To bypass the integer-electron constraint without modifying the underlying DFT code, we employ a mixed-Hamiltonian interpolation scheme: two adjacent integer-charge clients are run in parallel, and their energies, forces, and electronic chemical potentials (Fermi level/work function) are linearly interpolated to obtain an effective fractional-charge description. We validate the method on a one-dimensional asymmetric double-well model and an Al(111) surface, demonstrating stable potential control and well-behaved charge fluctuations. Finally, we couple constant-potential ab initio molecular dynamics (AIMD) with enhanced sampling to study CO2 reduction on NiN4-doped graphene, enabling efficient characterization of potential-dependent reactivity and free-energy landscapes. Overall, this framework provides a portable and scalable platform for conducting rigorous constant-potential simulations across diverse electronic-structure clients and, in principle, machine-learning potentials.
- Open Access
- 27 May 2026
- Published by Swiss Chemical Society in Chimia
- Vol. 80 (5) , 319-326
Delta-Augmented Subsystem Density Functional Theory: A Study Across Diverse Systems
In this study, we expand upon and benchmark the Kim–Gordon method (KG), a subsystem density functional theory (DFT) approach appended with a machine-learned correction to compensate for errors in the kinetic energy term and thereby match Kohn–Sham (KS) DFT accuracy. This correction is obtained through ‘delta- learning’ based on KS-DFT data. The method promises sampling of configurations for condensed molecular systems at the Kohn–Sham DFT level of accuracy at a fraction of the computational cost. Despite encouraging results for liquid water, it was not obvious whether the scheme had more general appeal. In this work, we show that the approach allows for a broad range of applications. In particular, we successfully apply it to complex molecular liquids, such as bulk ammonia and methanol. As a bonus, the correction trained on the bulk KS data is applicable to clusters, illustrating its transferability. By focusing on ‘delta-learning’—predicting small corrections rather than full Kohn-Sham (KS) energies and forces—we significantly reduce the required training data. This approach, especially when combined with linear-scaling self-consistent field (LS-SCF) techniques, establishes the method as a highly efficient computational tool for molecular dynamics.
- 27 May 2026
- Published by Swiss Chemical Society in Chimia
- Vol. 80 (5) , 319-326
Open AccessDelta-Augmented Subsystem Density Functional Theory: A Study Across Diverse Systems
In this study, we expand upon and benchmark the Kim–Gordon method (KG), a subsystem density functional theory (DFT) approach appended with a machine-learned correction to compensate for errors in the kinetic energy term and thereby match Kohn–Sham (KS) DFT accuracy. This correction is obtained through ‘delta- learning’ based on KS-DFT data. The method promises sampling of configurations for condensed molecular systems at the Kohn–Sham DFT level of accuracy at a fraction of the computational cost. Despite encouraging results for liquid water, it was not obvious whether the scheme had more general appeal. In this work, we show that the approach allows for a broad range of applications. In particular, we successfully apply it to complex molecular liquids, such as bulk ammonia and methanol. As a bonus, the correction trained on the bulk KS data is applicable to clusters, illustrating its transferability. By focusing on ‘delta-learning’—predicting small corrections rather than full Kohn-Sham (KS) energies and forces—we significantly reduce the required training data. This approach, especially when combined with linear-scaling self-consistent field (LS-SCF) techniques, establishes the method as a highly efficient computational tool for molecular dynamics.
- Open Access
- 10 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 3418
Author Correction: Operando monitoring of the functional role of tetrahedral cobalt centers for the oxygen evolution reaction
- 10 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 3418
Open AccessAuthor Correction: Operando monitoring of the functional role of tetrahedral cobalt centers for the oxygen evolution reaction
- 7 April 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (15) , 16412-16421
Li-Promotion in Rh-Based CO 2 Hydrogenation Catalysts to Ethanol: Enabling Carbon–Carbon Bond Formation at the Interface
Higher alcohol synthesis from syngas (CO/H2) has attracted large research efforts in the past decades. However, the analogous reaction using CO2 as a feedstock remains relatively underexplored. Due to the net reduction in anthropogenic CO2 emissions that can be achieved by this approach (provided green H2 is used), ethanol synthesis from CO2 has become a highly desirable reaction. Nevertheless, highly active and selective catalysts for this reaction have remained elusive and poorly understood, and their development presents a formidable task. By leveraging the synthesis of a well-defined, silica-supported Rh-Li based catalyst, we have improved our understanding of the role of lithium in the formation of ethanol from CO2. Using state-of-the-art spectroscopy, such as X-ray absorption spectroscopy, probe molecule infrared spectroscopy, and in-situ diffuse reflectance infrared spectroscopy, we were able to evidence the presence of an activated CO species at the interface of metallic Rh and Li+ which readily allows the insertion of -CHx species in the RhLi@SiO2 system. Complementary computational studies indicate that the insertion of CHx into CO is drastically facilitated and that the presence of Li+ protects -CHx species from overhydrogenation.
- 7 April 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (15) , 16412-16421
Li-Promotion in Rh-Based CO 2 Hydrogenation Catalysts to Ethanol: Enabling Carbon–Carbon Bond Formation at the Interface
Higher alcohol synthesis from syngas (CO/H2) has attracted large research efforts in the past decades. However, the analogous reaction using CO2 as a feedstock remains relatively underexplored. Due to the net reduction in anthropogenic CO2 emissions that can be achieved by this approach (provided green H2 is used), ethanol synthesis from CO2 has become a highly desirable reaction. Nevertheless, highly active and selective catalysts for this reaction have remained elusive and poorly understood, and their development presents a formidable task. By leveraging the synthesis of a well-defined, silica-supported Rh-Li based catalyst, we have improved our understanding of the role of lithium in the formation of ethanol from CO2. Using state-of-the-art spectroscopy, such as X-ray absorption spectroscopy, probe molecule infrared spectroscopy, and in-situ diffuse reflectance infrared spectroscopy, we were able to evidence the presence of an activated CO species at the interface of metallic Rh and Li+ which readily allows the insertion of -CHx species in the RhLi@SiO2 system. Complementary computational studies indicate that the insertion of CHx into CO is drastically facilitated and that the presence of Li+ protects -CHx species from overhydrogenation.
- Top Cited PapersOpen Access
- 20 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (4) , 3976-3986
Dynamics and Control of Dual Active Sites in Co-Substituted Ni Coordination Polymers for Enhanced Oxygen Evolution Catalysis
Facilitating the kinetically demanding oxygen evolution reaction (OER) is essential for the sustainable conversion of renewable energy into chemical fuels. However, precisely unraveling the dynamics of active species and sites during the OER remains a significant challenge. Herein, we constructed a series of Co-substituted Ni coordination polymers (Ni-CPs) for the OER. Complementary surface-/bulk-sensitive operando time-resolved spectroscopic monitoring enables detailed mechanistic insight into the critical role of partial Co incorporation in modulating the local coordination geometry of Ni centers and thereby promoting the intrinsic OER kinetics. Our results reveal that controlled Co substitution in Ni-CPs facilitates the generation of a substantial fraction of (Ni, Co)(IV) species, which activate O-O bond formation atop the catalytically active NiIV-O-CoIV moieties. These key findings are further supported by kinetic isotopic effect studies and density functional theory calculations, in which the OER in Ni3Co1-CPs proceeds via an oxo-radical coupling mechanism, with deprotonation preferentially occurring at the Ni sites. Consequently, the engineered Ni3Co1-CPs exhibit enhanced OER activity compared to their oxide counterparts, along with durable electrochemical stability for over 4000 h. This study not only offers detailed mechanistic insights into the dynamics of active species and sites but also highlights their critical role in optimizing the OER kinetics.
- 20 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (4) , 3976-3986
Top Cited PapersOpen AccessDynamics and Control of Dual Active Sites in Co-Substituted Ni Coordination Polymers for Enhanced Oxygen Evolution Catalysis
Facilitating the kinetically demanding oxygen evolution reaction (OER) is essential for the sustainable conversion of renewable energy into chemical fuels. However, precisely unraveling the dynamics of active species and sites during the OER remains a significant challenge. Herein, we constructed a series of Co-substituted Ni coordination polymers (Ni-CPs) for the OER. Complementary surface-/bulk-sensitive operando time-resolved spectroscopic monitoring enables detailed mechanistic insight into the critical role of partial Co incorporation in modulating the local coordination geometry of Ni centers and thereby promoting the intrinsic OER kinetics. Our results reveal that controlled Co substitution in Ni-CPs facilitates the generation of a substantial fraction of (Ni, Co)(IV) species, which activate O-O bond formation atop the catalytically active NiIV-O-CoIV moieties. These key findings are further supported by kinetic isotopic effect studies and density functional theory calculations, in which the OER in Ni3Co1-CPs proceeds via an oxo-radical coupling mechanism, with deprotonation preferentially occurring at the Ni sites. Consequently, the engineered Ni3Co1-CPs exhibit enhanced OER activity compared to their oxide counterparts, along with durable electrochemical stability for over 4000 h. This study not only offers detailed mechanistic insights into the dynamics of active species and sites but also highlights their critical role in optimizing the OER kinetics.
- Top Cited PapersOpen Access
- 15 January 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (4) , 1237-1310
The CP2K Program Package Made Simple
CP2K is a versatile open-source software package for simulations across a wide range of atomistic systems, from isolated molecules in the gas phase to low-dimensional functional materials and interfaces, as well as highly symmetric crystalline solids, disordered amorphous glasses, and weakly interacting soft-matter systems in the liquid state and in solution. This review highlights CP2K's capabilities for computing both static and dynamical properties using quantum-mechanical and classical simulation methods. In contrast to the accompanying theory and code paper [J. Chem. Phys. 152, 194103 (2020)], the focus here is on the practical usage and applications of CP2K, with underlying theoretical concepts introduced only as needed.
- 15 January 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (4) , 1237-1310
Top Cited PapersOpen AccessThe CP2K Program Package Made Simple
CP2K is a versatile open-source software package for simulations across a wide range of atomistic systems, from isolated molecules in the gas phase to low-dimensional functional materials and interfaces, as well as highly symmetric crystalline solids, disordered amorphous glasses, and weakly interacting soft-matter systems in the liquid state and in solution. This review highlights CP2K's capabilities for computing both static and dynamical properties using quantum-mechanical and classical simulation methods. In contrast to the accompanying theory and code paper [J. Chem. Phys. 152, 194103 (2020)], the focus here is on the practical usage and applications of CP2K, with underlying theoretical concepts introduced only as needed.