ZFZhongyong Fan

Zhongyong Fan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Zhongyong Fan has a total of 125 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Enhanced Mechanical Performance of Poly( l ‐Lactide)‐Based Degradable Materials by Solid‐State Drawing Process

    by Zhou Zhengzhe, Xia Qi, Liu Dongyang, Zhang Shinuo, Jin Qiuming, Yu Wenjie, Fan Zhongyong

    A convenient solid‐state drawing process is developed for the first time to simultaneously improve the mechanical properties of poly( l ‐lactide) (PLLA) and poly( l ‐lactide‐glycolide‐trimethylene carbonate) terpolymer (PLGT) via crystallization and molecular chain orientation. PLLA demonstrates a breaking strength of 164 MPa and a strain of 36%; while the drawn PLGT exhibits a higher breaking strength of 263 MPa and a strain of 55%. Such remarkable enhancement in mechanical properties was attributed to the transition of the crystal structure of PLLA segments from densely packed α phase to loosely arranged α ′ phase, the transition of spherulites to interlocking shish‐kebab crystals, and the orientation of amorphous molecular chains. Therefore, tailoring phase structure in totally degradable PLLA‐based copolymers provides a novel strategy to enhance their mechanical performance for uses as biomaterials.


  • Effect of Glycolyl Segment on Structure and Performances of Degradable Polyurethane Foam of Poly(ε‐Caprolactone‐ r ‐Glycolide) Copolymer

    by Jin Qiuming, Zhou Zhengzhe, Liu Dongyang, Xia Qi, Zhang Shinuo, Yu Wenjie, Fan Zhongyong

    A series of degradable flexible polyurethane foams were successfully prepared using a novel synthesized three‐armed poly(ε‐caprolactone‐ r ‐glycolide) (P(CL‐ r ‐GA)) as feedstocks. These foams with core density of about 60 kg/m 3 and cell diameter in the range of 220–348 μm showed high indentation force deflection and low rebound resilience, thus exhibiting excellent loading capacity and impact resistance. By adjusting the feed ratio of GA monomer, the effect of glycolyl segment on the foam compression and resilience properties is investigated. It is found that the incorporation of GA evidently improved the melt viscosity of the triols and led to a decrease in average cell diameter. Meantime, enhanced hydrogen bonding interactions between polyester segment and urethane or urea segment caused by glycolyl segment were observed among polyurethane chains. Because of the enhanced intermolecular interactions, the foam was endowed with high impact absorption performance with low ball rebound value and long recovery time. The Rusch model and Gibson model were used to analyze the mechanism of its mechanical behavior, and the results demonstrated that physical crosslinking formed by the hydrogen bonding of polyurethane chains led to an increase in Young's modulus of the foam at small deformation. Meanwhile, improved indentation force deflection at large deformation was mainly attributed to cell size reduction.

  • Open Access

    A novel paclitaxel eluting bioresorbable vascular stent with a super flexible stent structure and round cross section struts fabricated using 3D printing technology with a rotating platform

    by Wei Liu, Qingqing Li, Ge Song, Zhiqi Lin, Xiaofei Gong, Hanqing Feng, Hugh Q Zhao, Yujie Zhou, Yunbing Wang, Zhongyong Fan, et al.

    Bioresorbable stents (BRS) have emerged as a groundbreaking development in the field of percutaneous coronary intervention (PCI) as they address the long-standing concerns of metallic stents. Nevertheless, the observed higher thrombosis rates in the first generation BRS, i.e. ABSORB®, might be attributed to their thicker struts, slower degradation rate and structural dismantling of partially endothelialized stents. In this study, measures have been taken to overcome these limitations include reducing strut thickness, modifying the structural design to maintain radial strength with thinner round cross section struts and using a new material poly(L-lactide-co-ɛ-caprolactone) (PLCL 95/5) that is tougher and degrade faster than poly(L-lactic acid) (PLLA).Given the excellent biocompatibility of PLCL materials, the US FDA has approved their use in clinical applications. PLCL stents can be used to treat diseases such as tracheal stenosis and tracheoesophageal fistula, and can also be applied in the construction of other tissue engineering stents, such as nerve conduitsand fat filling stents. The newly designed coronary stents were fabricated using a 3D printing technology with a rotating platform, coated with a paclitaxel coating and comprehensive in vitro research was conducted. It was the first to undergo tests in animals. Results showed the novel paclitaxel eluting PLCL stents had super-flexible structure, thinner round cross-sectional struts, a faster degradation profile and satisfactory hemocompatibility. With a paclitaxel dose of 0.57 μg/mm2, the drug eluting stents showed very low degree of stenosis within 6 months of implantation in a porcine model. Overall, the results showed that the novel 3D printed PLCL drug eluting stent is a very promising candidate for next generation bioresorbable coronary stent.


  • Enhanced biodegradable copolymers: Synthesis and characterization of high molecular weight poly(L‐lactide‐ r ‐ε‐caprolactone)

    by Liu Dongyang, Xia Qi, Ye Wuyou, Zhang Shinuo, Yu Wenjie, Zhou Zhengzhe, Fan Zhongyong

    Semi‐crystalline poly(L‐lactide‐ r ‐ε‐caprolactone) (P(LLA‐ r ‐ε‐CL)) as an important biodegradable material applied in biomedical devices has attracted much attention from researchers. A series of high molecular weight P(LLA‐ r ‐ε‐CL) semi‐crystalline copolymers attached with various monomer molar ratio of L‐lactide (LLA) and ε‐caprolactone (ε‐CL) with up to 2.9 × 10 5 g/mol were synthesized first time by ring‐opening copolymerization under high vacuum condition. The chemical composition, chain sequence microstructure and their relationship of P(LLA‐ r ‐ε‐CL) were characterized by 1 H NMR and 13 C NMR. Spectra results shown that as the ε‐CL content increased from 3 mol% to 15 mol%, the average LLA sequence length decreased from 80.4 to 19.6 units. With decrease of LLA sequence length, the glass transition temperature ( T g ), melting temperature( T m ) and the crystallinity ( χ c ) of copolymers had a reduction. Meantime, it resulted in a high degradation rate of samples in enzyme‐catalyzed condition. With loss of rigid crystal and plasticization from soft ε‐CL segment, P(LLA‐ r ‐ε‐CL) had an improved toughness as the elongation at break reaching 195.5%, while still had a considerable tensile strength of 49.2 MPa. Further data analysis exhibited an exponential relationship between LLA sequence length and mechanical performance. Additionally, biocompatibility assessments through CCK‐8 and Live/Dead cell assays confirmed the good cytocompatibility of the enhanced biomedical materials.

  • Effect of trimethylene carbonate segments on the structure and properties of poly(L‐lactide‐glycolide‐trimethylene carbonate) terpolymers for biodegradable vascular stents

    by Qi Xia, Dongyang Liu, Qiuming Jin, Shinuo Zhang, Wenjie Yu, Zhongyong Fan, Qing Liu, Lu Cao

    The total biodegradable vascular stent made of poly(L‐lactide‐glycolide‐trimethylene carbonate) terpolymers with excellent performances has the potential to be used in a new generation of medical implant devices. In this work, the properties and structure of terpolymers were investigated, which were found to be controlled by the composition of the copolymer chain. The amorphous trimethylene carbonate segments not only disturbed the sequence regularity of the L‐lactide segment, but also reduced the crystallization ability of the material. Furthermore, it is the flexible segments in the terpolymer chains that improve the plastic flow capacity, increase the flexibility of chains as well as reduce the apparent activation energy of thermal degradation of materials. Such a chain structured terpolymer exhibited good extrudability and buildability in 3D printing and formed a vascular stent with a cohesion entanglement characteristic microstructure during the process. The crush resistance with radially applied load and crush resistance with parallel plates of stent were 2561.4 mm Hg and 0.24 N/mm, respectively.


  • Eliminating the thermal degradation of polylactic acid by the modification of a macromolecular epoxy‐type chain extender

    by Hao Duan, Congshan Zhu, Zhongyong Fan

    A novel macromolecular epoxy chain extender was synthesized and used to modify the PLA resin for developing conventional melt extrusion technology. Fourier‐transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), and 1H nuclear magnetic resonance (1H NMR) characterized the successful synthesis. For the first time, the molecular weight plays a key role in preventing thermal degradation and chain extension were discussed experimentally. Macromolecular chain extender showed superior advantages in that the chain extender with higher molecular weight was easier to get the long chain branched (LCB) structure in the modification of PLA. The characterization by rotational rheometer, GPC, melt index, chemical titration, and differential scanning calorimeter (DSC), results demonstrate that the macromolecular epoxy chain extender could decrease the concentration of terminal carboxyl groups and increase with only 0.5% dosage. At a concentration ≥2%, there were a large number of long chain branched structures in the chain extension system for modified PLA. It showed better melt strength and would influence the crystallinity of PLA which would significantly improve the processability of PLA, especially in high‐temperature extrusion, blow molding, spinning, and other processing technologies and applications.


  • 3D printed peripheral vascular stents based on degradable poly(trimethylene carbonate‐b‐(L‐lactide‐ran‐glycolide)) terpolymer

    by Na Ni, Tiantang Fan, Wuyou Ye, Qi Xia, Dongyang Liu, Jingwen Qin, Zhongyong Fan, Qing Liu

    Poly(L‐lactic acid) (PLLA) is a biocompatible material and has found its application in bioresorbable vascular stents (BVS). However, the crystallization of pure PLLA makes it brittle as a medical implant device. In this work, the biodegradable poly(1,3‐trimethylene carbonate‐b‐(L‐lactide‐ran‐glycolide acid)) (PTLG) terpolymers with improved mechanical performance were developed and processed into peripheral vascular stents by a novel 3D 4‐axial printing technology. The PTLG terpolymers were successfully synthesized by ring‐opening copolymerization of L‐lactic acid (LLA), 1,3‐trimethylene carbonate (PTMC) and glycolide acid (GA) units. The crystallinity and mechanical properties of the PTLG terpolymers with various degradation rate depends on the chain sequence structure and the component contents. Compared with the stent prepared by laser engraving, the peripheral vascular stent prepared by the 3D 4‐axial printing technology exhibit a finer structure and smoother strut surface. It was found that both the strut diameters and the molecular weight of PTMC affect the radial force of the stents and that the apparent activation energy of thermal decomposition of the stents is mainly influenced by the molecular weight of PTMC and the component ratio. Therefore, the addition of the PTMC segment can effectively improve the flexibility of the PTLG terpolymer stent and the 3D printed PTLG terpolymer‐based stent. Furthermore, CCK‐8 and live/dead staining suggested that the stents have good biocompatibility.


  • Crystallization behavior of stereoblock polylactide with high sequence regularity structure

    by Ye Wuyou, Xia Qi, Liu Dongyang, Gao Shida, Fan Zhongyong, Liu Qing

    Stereoblock polylactide (Sb‐PLA) was prepared via a consecutive method by ring‐opening polymerization and its stereocomplex crystallization behavior was investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM). The molecular weight, sequence structure of anisotropic segments of Sb‐PLA and crystals structure were characterized by using GPC, 1H NMR, 13C NMR and XRD. The Sb‐PLA with bonding a higher stereoregularity chains prepared by the synthesis route exhibited a higher melting point and uniquely stereocomplex crystallization behavior compared with the Sb‐PLA prepared by commonly reported method. The isothermal crystallization results indicated that the crystallization temperature of Sb‐PLA's increased about 20°C higher than reported Sc‐PLA materials. Moreover, crystallization rate constant (K) and crystallization activation energy (ΔE) expressed by the Arrhenius equation demonstrated that Sb‐PLA presents a higher crystallization rate. The data of isothermal crystallization experiments were analyzed based on Lauritzen–Hoffman (LH) theory, crystallization rate constant (G0), nucleation constant (Kg), fold surface free energy (σe), and folding work (q) were estimated to be 1.5 × 1027 μm/min, 1.2 × 106 K2, 113.0 erg/cm2 and 8.20 × 10−21 J, respectively. These results indicated that Sb‐PLA chains with a higher stereoregularity suggested to be the main factor accounting for the formation unique stereocomplex crystals.


  • Structure, properties, and in vitro degradation behavior of biodegradable poly(L‐lactic acid)‐trimethylene carbonate‐glycolide terpolymer

    by Qi Xia, Wuyou Ye, Qin Zhang, Dongyang Liu, Shida Gao, Zhongyong Fan, Qing Liu

    For biodegradable medical implants, it is critical to match the degradation rate of the material with the lesion healing rate of the tissue defect. Here, we report the synthesis of poly(L‐lactic acid) (PLLA)‐trimethylene carbonate (TMC)‐glycolide (GA) terpolymers with various monomer feeding ratios of L‐lactide, TMC, and GA. The terpolymers were prepared through ring‐opening polymerization with the purpose to improve degradation and mechanical properties of the terpolymers for biomedical applications. The influence of various GA contents in PLLA‐TMC‐GA terpolymers on the chain structure and their in vitro degradation performances were evaluated by using gel permeation chromatography, differential scanning calorimetry, X‐ray diffraction, 1H nuclear magnetic resonance, and tensile tests. Compared with pure PLLA, the degradation rate of terpolymers increased with the increase of GA content, because GA segments, which have a faster hydrolysis rate, not only effectively disrupt the regularity of LLA segment, but also increase the probability of chains scission during the degradation process. In a 28‐week long degradation study, the mass loss of PLLA‐TMC‐GA terpolymers was about 36%, which is a faster rate than reported for pure PLLA. Therefore, it is possible to tailor the copolymer chain structures by varying the ratio of GA in the terpolymer to balance its degradation rate with body's lesion healing rate.


  • A Novel Stereocomplex Poly(lactic acid) with Shish-Kebab Crystals and Bionic Surface Structures as Bioimplant Materials for Tissue Engineering Applications

    by Jiafeng Li, Wuyou Ye, Zhongyong Fan, Lu Cao

    The development of green material possessing with great mechanical properties and biocompatibility has become a primary goal for high-performance biological material applications. Herein, the oriented shish-kebab crystals of stereocomplex poly(lactic acid) (SC-PLA) are first reported to be successfully fabricated through a feasible solid-state drawing (SSD) process to simultaneously enhance the mechanical performance and biocompatibility. The resultant biomaterial exhibits a tensile strength of 373 MPa and elongation about 9%, with elastic modulus about 8.1 GPa. Such an outstanding toughening effect is due to an amalgamation of enhanced crystallinity of epitaxial secondary growth lamellae and orientation degree of the fibrous backbone of the SC-PLA samples, both gradually increasing with the draw ratio of SSD increasing. Uniquely distinguished from the typical biomedical polymer with the smooth surface structure, the as-obtained SC-PLA samples possess a surface morphology of parallel microgrooves within ridge structures, attributing to the highly oriented fibrous backbone structure complemented with regularly arranged epitaxial lamellas. This unique trait well represents the human vascular endothelial microstructure that is desirable for cell adhesion-growth to extend its proliferation, differentiation, and activity on the surface of SC-PLA.