Ramarao Pratibha
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ramarao Pratibha has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
Prutha Nagaraja
Soft Condensed Matter Lab, Raman Research Institute, Bangalore 560080, India
3 shared publicationsRaj Kumar Khan
Soft Condensed Matter Laboratory, Raman Research Institute , Bangalore 560080, India
3 shared publicationsG. B. Deepa
Raman Research Institute, C. V. Raman Avenue, Sadashivanagar, Bangalore 560 080, India
2 shared publicationsIgor Musevic
J. Stefan Institute, Condensed Matter Department, Ljubljana 191000, Slovenia
2 shared publications- N. V. Madhusudana
Raman Research Institute
2 shared publications Neha B. Topnani
Soft Condensed Matter Lab, Raman Research Institute, Bangalore 560080, India
2 shared publications
Latest Publications
- 17 June 2024
- Published by Springer Nature in Brazilian Journal of Physics
- Vol. 54 (4) , 1-8
Dielectric Studies on a Bent-Core Liquid Crystal Taken in Cells Fabricated with ITO Substrates Functionalized with Bent-Core Molecules
- 17 June 2024
- Published by Springer Nature in Brazilian Journal of Physics
- Vol. 54 (4) , 1-8
Dielectric Studies on a Bent-Core Liquid Crystal Taken in Cells Fabricated with ITO Substrates Functionalized with Bent-Core Molecules
- 1 April 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (4) , 047108
Interplay of self-assembly and viscoelasticity in chiral liquid crystal gels
Electro-optic and photonic devices that are robust against external stresses and deformation offer several technological advantages. A variety of device applications based on chiral liquid crystals (LCs) exhibiting blue phases (BPs), chiral nematic (N*), and ferroelectric Smectic (SmC*) phases have already been demonstrated. Chiral LC-gels are, therefore, among the best soft materials that can further extend device performance and functionality by combining electro-optic and photonic properties with mechanical stability. In view of this, a composite material composed of two highly chiral calamitic LCs and a low-molecular-weight organogelator was developed and investigated using a variety of experimental techniques. Optical microscopy, selective reflection, and x-ray diffraction studies show that the LC characteristics are very well retained in the chiral LC-gels, namely, BPIII-gel, BPII-gel, BPI-gel, N*-gel, twist grain boundary A phase (TGBA)-gel, and SmC*-gel, which form sequentially as the sample is gradually cooled from the isotropic phase. Rheological studies establish that the chiral LC-gels exhibit several features of a soft viscoelastic solid. This has been understood in terms of the mode of self-assembly of the gelator fibers and the ubiquitous defects pertinent to different LC phases. The major highlights of the study are the formation of a defect-mediated strong N*-gel with enhanced viscoelastic moduli and the induction of a TGBA-gel. The stretchable nature of a free-standing film of the BPI-gel that retains its shape over time is another interesting aspect of the present work.
- 1 April 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (4) , 047108
Interplay of self-assembly and viscoelasticity in chiral liquid crystal gels
Electro-optic and photonic devices that are robust against external stresses and deformation offer several technological advantages. A variety of device applications based on chiral liquid crystals (LCs) exhibiting blue phases (BPs), chiral nematic (N*), and ferroelectric Smectic (SmC*) phases have already been demonstrated. Chiral LC-gels are, therefore, among the best soft materials that can further extend device performance and functionality by combining electro-optic and photonic properties with mechanical stability. In view of this, a composite material composed of two highly chiral calamitic LCs and a low-molecular-weight organogelator was developed and investigated using a variety of experimental techniques. Optical microscopy, selective reflection, and x-ray diffraction studies show that the LC characteristics are very well retained in the chiral LC-gels, namely, BPIII-gel, BPII-gel, BPI-gel, N*-gel, twist grain boundary A phase (TGBA)-gel, and SmC*-gel, which form sequentially as the sample is gradually cooled from the isotropic phase. Rheological studies establish that the chiral LC-gels exhibit several features of a soft viscoelastic solid. This has been understood in terms of the mode of self-assembly of the gelator fibers and the ubiquitous defects pertinent to different LC phases. The major highlights of the study are the formation of a defect-mediated strong N*-gel with enhanced viscoelastic moduli and the induction of a TGBA-gel. The stretchable nature of a free-standing film of the BPI-gel that retains its shape over time is another interesting aspect of the present work.
- 15 November 2021
- Published by Taylor & Francis in Liquid Crystals
- Vol. 49 (7-9) , 1246-1260
Planar and Vertical Alignment of Rod-like and Bent-core Liquid Crystals Using Functionalized Indium Tin Oxide Substrates
Indium tin oxide (ITO) substrates are chemically modified with bent-shaped molecules and influence of these surface immobilised molecules on the alignment of bulk liquid crystal (LC) samples has been investigated. Bent-core (BC) compounds containing a dimethylchlorosilane moiety at the end of a terminal alkyl chain and a lateral alkyl chain are successfully attached to transparent conducting ITO substrates in an end-on (ITO-BC-t) and side-on (ITO-BC-l) oriented fashion to create stable permanent self-assembled BC layers on the substrates. Surface functionalization is thoroughly characterised and aligning ability of these BC-modified ITO substrates for orientation of bulk LC sample is evaluated for nematic phase of both rod-like and BCLC samples. The BC-modified substrates are effective in aligning the rod-like compounds in vertical (ITO-BC-t), planar orientations (ITO-BC-l) and the BC compounds in homeotropic (ITO-BC-t) alignment. Graphical abstract
- 15 November 2021
- Published by Taylor & Francis in Liquid Crystals
- Vol. 49 (7-9) , 1246-1260
Planar and Vertical Alignment of Rod-like and Bent-core Liquid Crystals Using Functionalized Indium Tin Oxide Substrates
Indium tin oxide (ITO) substrates are chemically modified with bent-shaped molecules and influence of these surface immobilised molecules on the alignment of bulk liquid crystal (LC) samples has been investigated. Bent-core (BC) compounds containing a dimethylchlorosilane moiety at the end of a terminal alkyl chain and a lateral alkyl chain are successfully attached to transparent conducting ITO substrates in an end-on (ITO-BC-t) and side-on (ITO-BC-l) oriented fashion to create stable permanent self-assembled BC layers on the substrates. Surface functionalization is thoroughly characterised and aligning ability of these BC-modified ITO substrates for orientation of bulk LC sample is evaluated for nematic phase of both rod-like and BCLC samples. The BC-modified substrates are effective in aligning the rod-like compounds in vertical (ITO-BC-t), planar orientations (ITO-BC-l) and the BC compounds in homeotropic (ITO-BC-t) alignment. Graphical abstract
- 12 January 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (2) , 024702
Selective stabilization of blue phase liquid crystals using spherical and rod-shaped colloidal nanocrystals
Optimizing strategies used for improving the stability and properties of blue phase (BP) liquid crystals directly impact device performance. Various factors ranging from molecular structure to sample size and substrate conditions can influence selective reflection and electro-optics of BPs. More recently, the technique of incorporating colloidal nanoparticle (NP) assemblies has been used to enhance BP ranges. In cubic BPs, disclination networks can act as trapping centers for NPs, reducing the high elastic energy cost of these regions, favoring BP stability. Organization of NPs in the defect regions can sustain stable 3D colloidal structures, widening the scope and applicability of BPs as photonic materials. Physical and chemical properties, size, and shape of the NPs can also determine the utilization of BPs for advanced applications like lasers and high quality displays. In view of this, a mixture of two calamitic chiral compounds in which all three BPs, viz., BPI, BPII, and BPIII, were induced was combined with rod-shaped CdSe/CdS quantum rods (QRs) and spherical CdSe quantum dots (QDs), which were specifically chosen due to their exceptional optical properties. This also provided an opportunity to investigate the effect of the shape of the NPs on the preferential stabilization of the BPs and on the electro-optic Kerr effect. QRs were found to be more efficient in enhancing the overall BP range, with an almost twofold increase of ∼27 °C with ∼0.5 wt. %. On the other hand, with QDs, the BP range showed an initial increase of 20 °C for ∼0.3 wt. %, which, however, decreased with a further increase in QDs. Another major difference is that the Kerr effect was active only in the BPIII in the case of QDs but is measurable in both cubic BPI and BPII in the case of QRs. The results have been described in terms of the organization of the nanocrystals within the defect lines and the lattice orientations imposed by the substrates.
- 12 January 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (2) , 024702
Selective stabilization of blue phase liquid crystals using spherical and rod-shaped colloidal nanocrystals
Optimizing strategies used for improving the stability and properties of blue phase (BP) liquid crystals directly impact device performance. Various factors ranging from molecular structure to sample size and substrate conditions can influence selective reflection and electro-optics of BPs. More recently, the technique of incorporating colloidal nanoparticle (NP) assemblies has been used to enhance BP ranges. In cubic BPs, disclination networks can act as trapping centers for NPs, reducing the high elastic energy cost of these regions, favoring BP stability. Organization of NPs in the defect regions can sustain stable 3D colloidal structures, widening the scope and applicability of BPs as photonic materials. Physical and chemical properties, size, and shape of the NPs can also determine the utilization of BPs for advanced applications like lasers and high quality displays. In view of this, a mixture of two calamitic chiral compounds in which all three BPs, viz., BPI, BPII, and BPIII, were induced was combined with rod-shaped CdSe/CdS quantum rods (QRs) and spherical CdSe quantum dots (QDs), which were specifically chosen due to their exceptional optical properties. This also provided an opportunity to investigate the effect of the shape of the NPs on the preferential stabilization of the BPs and on the electro-optic Kerr effect. QRs were found to be more efficient in enhancing the overall BP range, with an almost twofold increase of ∼27 °C with ∼0.5 wt. %. On the other hand, with QDs, the BP range showed an initial increase of 20 °C for ∼0.3 wt. %, which, however, decreased with a further increase in QDs. Another major difference is that the Kerr effect was active only in the BPIII in the case of QDs but is measurable in both cubic BPI and BPII in the case of QRs. The results have been described in terms of the organization of the nanocrystals within the defect lines and the lattice orientations imposed by the substrates.
- 22 December 2020
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 4 (12) , 126002
Fluorescence intermittency and spatial localization of core-shell quantum rod clusters in an inverse nematic gel
Formation of stable dispersions of CdSe/CdS core-shell quantum rods (CSQRs) in an inverse nematic gel (N-gel) is reported. The CSQRs distribute uniformly in the N-gel matrix and spontaneously form an ordered arrangement of bright clusters. Estimates show that similar to 90% of CSQRs are homogeneously dispersed and similar to 10% form clusters in the N-gel phase. Optical properties exhibited by individual CdSe/CdS CSQRs are retained in the dispersions, including a moderate polarization dependence. Extensive fluorescence confocal microscopy studies show evidence for suppressed fluorescence blinking of the clusters in the N-gel phase. The spatial constancy of such clusters is another attractive feature which makes them suitable as stable nanoemitters. The results are interpreted in terms of the unusual type of distribution of the helical gelator fibers in the N-gel phase which promotes self-assembly of the CSQRs and interactions within the clusters.
- 22 December 2020
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 4 (12) , 126002
Fluorescence intermittency and spatial localization of core-shell quantum rod clusters in an inverse nematic gel
Formation of stable dispersions of CdSe/CdS core-shell quantum rods (CSQRs) in an inverse nematic gel (N-gel) is reported. The CSQRs distribute uniformly in the N-gel matrix and spontaneously form an ordered arrangement of bright clusters. Estimates show that similar to 90% of CSQRs are homogeneously dispersed and similar to 10% form clusters in the N-gel phase. Optical properties exhibited by individual CdSe/CdS CSQRs are retained in the dispersions, including a moderate polarization dependence. Extensive fluorescence confocal microscopy studies show evidence for suppressed fluorescence blinking of the clusters in the N-gel phase. The spatial constancy of such clusters is another attractive feature which makes them suitable as stable nanoemitters. The results are interpreted in terms of the unusual type of distribution of the helical gelator fibers in the N-gel phase which promotes self-assembly of the CSQRs and interactions within the clusters.
- 1 September 2020
- Published by Elsevier in Acta Biomaterialia
- Vol. 113, 522-540
Theranostic lyotropic liquid crystalline nanostructures for selective breast cancer imaging and therapy
- 1 September 2020
- Published by Elsevier in Acta Biomaterialia
- Vol. 113, 522-540
Theranostic lyotropic liquid crystalline nanostructures for selective breast cancer imaging and therapy
- 28 January 2020
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 16 (12) , 2933-2940
Self-assembled toron-like structures in inverse nematic gels
Inverse nematic gels stabilized by topologically protected localized toron-like structures induced by chiral gelator fibres
- 28 January 2020
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 16 (12) , 2933-2940
Self-assembled toron-like structures in inverse nematic gels
Inverse nematic gels stabilized by topologically protected localized toron-like structures induced by chiral gelator fibres
- 25 July 2019
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 35 (34) , 11200-11209
Clusters of B7 Fibers Reveal Origin of Blue Phase Stability in a Binary Mixture of Chiral Rod-like and Achiral Bent-Core Molecules
Liquid crystal (LC) blue phases (BPs) have gained relevance due to their potential applicability as tunable photonic band gap materials. However, their narrow temperature range often restricts technical usage. Doping with an LC made of achiral bent-core (BC) molecules is one of the strategies employed to increase BP stability. It is now shown that mixing a BCLC exhibiting the polarization modulated lamellar B7 phase, with a calamitic chiral LC made of rod-like (R) molecules, enhances the BP range considerably. The special feature in this system is the spontaneous expulsion of clusters of B7 fibres in the chiral nematic (N*) phase occurring below the BPs. This gives a clear indication that islands rich in BC molecules lie interspersed between the R molecules. Based on several experimental studies, it is shown that the BP stability may be attributed to an interplay of conformational and intrinsic chirality of the BC and R molecules across the interface of these islands. This study provides new insights from a molecular point of view and provides a novel technique for designing stable induced BPs. The additional novelty is the occurrence of a phase transition within the fibres. Further the electro-responsive fibres may also have potential to form new materials.
- 25 July 2019
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 35 (34) , 11200-11209
Clusters of B7 Fibers Reveal Origin of Blue Phase Stability in a Binary Mixture of Chiral Rod-like and Achiral Bent-Core Molecules
Liquid crystal (LC) blue phases (BPs) have gained relevance due to their potential applicability as tunable photonic band gap materials. However, their narrow temperature range often restricts technical usage. Doping with an LC made of achiral bent-core (BC) molecules is one of the strategies employed to increase BP stability. It is now shown that mixing a BCLC exhibiting the polarization modulated lamellar B7 phase, with a calamitic chiral LC made of rod-like (R) molecules, enhances the BP range considerably. The special feature in this system is the spontaneous expulsion of clusters of B7 fibres in the chiral nematic (N*) phase occurring below the BPs. This gives a clear indication that islands rich in BC molecules lie interspersed between the R molecules. Based on several experimental studies, it is shown that the BP stability may be attributed to an interplay of conformational and intrinsic chirality of the BC and R molecules across the interface of these islands. This study provides new insights from a molecular point of view and provides a novel technique for designing stable induced BPs. The additional novelty is the occurrence of a phase transition within the fibres. Further the electro-responsive fibres may also have potential to form new materials.
- 17 September 2018
- Published by Taylor & Francis in Liquid Crystals
- Vol. 46 (5) , 666-673
Photoluminescence and electrical conductivity measurement of liquid crystal doped with ZnO nanoparticles
We report the effect of dispersion of zinc oxide (ZnO) nanoparticles (NPs) on the conductivity, birefringence and fluorescence properties of commercially available room temperature nematic liquid crystal (LC) with the variation of dopant concentration. Significant changes have been observed in transition enthalpy, DC conductivity, photoluminescence and birefringence values of the LC material by the addition of ZnO NPs. While the inclusion of NPs enhances the electrical conductivity of the composite system, it results in a reduction in the birefringence value, which can be attributed to a decrease in the order parameter of the system due to the perturbed geometry of the LC. This also results in the increase in threshold voltage value, which has been speculated as due to the piezoelectric nature of the ZnO NPs. The analysis of the fluorescence spectrum indicates that ZnO NPs enhance the intensity in the LC phase along with a small blue shift. Graphical Abstract
- 17 September 2018
- Published by Taylor & Francis in Liquid Crystals
- Vol. 46 (5) , 666-673
Photoluminescence and electrical conductivity measurement of liquid crystal doped with ZnO nanoparticles
We report the effect of dispersion of zinc oxide (ZnO) nanoparticles (NPs) on the conductivity, birefringence and fluorescence properties of commercially available room temperature nematic liquid crystal (LC) with the variation of dopant concentration. Significant changes have been observed in transition enthalpy, DC conductivity, photoluminescence and birefringence values of the LC material by the addition of ZnO NPs. While the inclusion of NPs enhances the electrical conductivity of the composite system, it results in a reduction in the birefringence value, which can be attributed to a decrease in the order parameter of the system due to the perturbed geometry of the LC. This also results in the increase in threshold voltage value, which has been speculated as due to the piezoelectric nature of the ZnO NPs. The analysis of the fluorescence spectrum indicates that ZnO NPs enhance the intensity in the LC phase along with a small blue shift. Graphical Abstract