GNGina Noh

Gina Noh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gina Noh has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mechanochemical activation of amorphous carbon in air: spectroscopic characterization of defect evolution and functionalization

    by Ilke Gurgan, Jordan Meyet, Dilara Hatinoglu, James Reinwald, Onur Apul, Seong H. Kim, Gina Noh

    Ball milling enables non-thermal transformation of carbon materials through mechanically induced structural and chemical changes.

  • Influence of oxygen-containing functional groups of activated carbon and structural branching of per- and polyfluoroalkyl substances on adsorption

    by Dilara Hatinoglu, Manisha Choudhary, Sivachandiran Loganathan, Jack Landis, Plabon Islam Turzo, Ilke Gurgan, Konstantinos Alexopoulos, Gina Noh, Seong Kim, David Hanigan, et al.

  • Open Access

    Key Drivers of Activity and Selectivity in Cu‐Based Catalysts for Methanol Synthesis From CO 2 : Insights From Atomically Dispersed Promoters

    by Nat Phongprueksathat, Gina Noh, Scott R. Docherty, Damian Vico van Berkel, Yannik Stiefel, Christophe Copéret, Atsushi Urakawa

    The synergistic Cu–metal oxide (Cu–MO x ) interface is critical for selective CO 2 hydrogenation to methanol, yet its mechanistic function, the central, long‐debated feature of industrial Cu/ZnO/Al 2 O 3 , remains ambiguous. Using operando transient DRIFTS‐SSITKA, we elucidate the roles of M + sites (Zn 2+ , Ga 3+ , and In 3+ ) on model Cu─M/SiO 2 catalysts prepared by surface organometallic chemistry (SOMC). X‐ray absorption spectroscopy reveals that these promoters restructure from alloys after reduction to cationic species at the interface under reaction conditions. We find the promoter's electronic effect on formate bond strengths provides quantitative descriptors for both activity and selectivity. All catalysts follow a common formate spillover mechanism, with methoxy hydrogenation/desorption as the rate‐limiting step. The intrinsic CH 3 OH formation rate follows a Sabatier‐type volcano with C─O bond strength, while selectivity correlates linearly with C─H bond strength (a proxy for the formate decomposition barrier). Cu─Ga/SiO 2 shows the fastest spillover, suppressing CO formation and yielding the highest selectivity; Cu─Zn/SiO 2 has optimal binding for the highest activity; In 3+ binds formate too strongly, creating a kinetic trap on the strong‐binding side of the volcano. These findings bring mechanistic clarity to the debated Cu─Zn(O) synergy, showing selectivity is governed by a balance of electronic stabilization and spillover dynamics.

  • Open Access

    Key Drivers of Activity and Selectivity in Cu‐Based Catalysts for Methanol Synthesis From CO 2 : Insights From Atomically Dispersed Promoters

    by Nat Phongprueksathat, Gina Noh, Scott R. Docherty, Damian Vico van Berkel, Yannik Stiefel, Christophe Copéret, Atsushi Urakawa

    The synergistic Cu–metal oxide (Cu–MO x ) interface is critical for selective CO 2 hydrogenation to methanol, yet its mechanistic function, the central, long‐debated feature of industrial Cu/ZnO/Al 2 O 3 , remains ambiguous. Using operando transient DRIFTS‐SSITKA, we elucidate the roles of M + sites (Zn 2+ , Ga 3+ , and In 3+ ) on model Cu─M/SiO 2 catalysts prepared by surface organometallic chemistry (SOMC). X‐ray absorption spectroscopy reveals that these promoters restructure from alloys after reduction to cationic species at the interface under reaction conditions. We find the promoter's electronic effect on formate bond strengths provides quantitative descriptors for both activity and selectivity. All catalysts follow a common formate spillover mechanism, with methoxy hydrogenation/desorption as the rate‐limiting step. The intrinsic CH 3 OH formation rate follows a Sabatier‐type volcano with C─O bond strength, while selectivity correlates linearly with C─H bond strength (a proxy for the formate decomposition barrier). Cu─Ga/SiO 2 shows the fastest spillover, suppressing CO formation and yielding the highest selectivity; Cu─Zn/SiO 2 has optimal binding for the highest activity; In 3+ binds formate too strongly, creating a kinetic trap on the strong‐binding side of the volcano. These findings bring mechanistic clarity to the debated Cu─Zn(O) synergy, showing selectivity is governed by a balance of electronic stabilization and spillover dynamics.

  • Top Cited Papers
    Open Access

    CO 2 Hydrogenation Using Nonthermal Plasma: Effects of Packed Beds on Plasma Discharge Behavior

    by Sathya M. Perera, Berkay Ekinci, Sven G. Bilén, Sean D. Knecht, Gina Noh

    Nonthermal plasma-assisted catalysis offers a promising approach to activate strong chemical bonds such as those in CO2 and transform such stable molecules into value-added products under ambient conditions. Advancement in this field requires building upon understanding of plasma–catalyst interactions that dictate product selectivity, conversion, and energy efficiency. This study aims to systematically assess how different dielectric supports influence plasma discharge behavior and reactor performance during CO2 hydrogenation in a dielectric barrier discharge reactor. The dielectric constant of the packing material strongly influences discharge behavior and, consequently, catalytic activity. Among the materials examined, Al2O3 exhibited the highest CO2 conversion of 42% at a plasma power of 23 W, whereas CeO2 yielded the lowest (∼5%) due to the formation of a diffuse discharge, in contrast to localized discharges or surface streamers. CO2 conversion over CeO2 beds of a given particle size were nearly identical irrespective of changes in particle size, further supporting this discharge-dependent behavior. Notably, this work highlights the importance of comparing reactor performance for packed beds under nonpartial discharge operation.


  • Open Access

    A Multisite Microkinetic Framework for Describing Interfacial Kinetics in Dry Methane Reforming (DRM) over Ni-CeO 2 Catalysts

    by Nirenjan Shenoy Padmanabha Naveen, Kerry M. Dooley, Michael J. Janik, Gina Noh, Konstantinos Alexopoulos

    Oxide-supported Ni catalysts are widely employed for the dry reforming of methane (DRM), where the metal–support interface plays a pivotal role in mediating interfacial O-transport and H-spillover reactions. In this work, a multisite microkinetic model is developed for the Ni-CeO2 system to elucidate how interfacial processes govern the overall DRM activity and/or selectivity. Kinetic parameters for the model are obtained from density functional theory (DFT), and they are adjusted to ensure thermodynamic consistency, while geometric parameters are derived from an assumed catalyst model. Analyses of reaction orders reveal mixed dependencies of DRM rate on CH4 and CO2 pressures, depending on the prevailing kinetic regime. Global sensitivity analysis (Sobol) identifies the Ni nanoparticle radius (r m) as a dominant geometric parameter controlling the overall rate. Degree of rate control (DRC) analysis shows that CH4 activation is rate-determining for small Ni nanoparticles, while O-transport becomes limiting at a larger r m, indicating a transition to deactivation-prone regimes. The model captures this transition without explicitly incorporating coking pathways, demonstrating its robustness in representing interfacial effects. This multisite model establishes a mechanistic framework for examining transport across metal–support boundaries and serves as a predictive tool for studying interface-mediated reaction systems.


  • Open Access

    Synthesis of M1-MoVBiOx from Metal Oxide Precursors with High Activity for Oxidative Dehydrogenation of Ethane

    by Brendan Troesch, Sonali Thanthrige, Ke Wang, Prashant Deshlahra, Gregory Novotny, Gina Noh, James Hodges

    MoV-based oxides with the M1 phase are an important family of catalysts for oxidative dehydrogenation (ODH) of light alkanes. M1 materials are typically synthesized using multi-step protocol that require expen-sive precursors and high-temperature processing to induce crystallization. Here, we use a single-step hydro-thermal route to generate phase-pure MoV0.3Bi0.05Ox, a Bi-containing M1 analogue that is inaccessible using conventional methods. The approach employs simple oxide precursors, which are reacted in the presence of carboxylic acids and ethylene glycol to give M1 product in high yields. The MoVBiOx crystals have belt-like morphology and show high activity for ethane-ODH, while also maintaining ethylene selectivity greater than 75% at 80% ethane conversion. We anticipate this chemistry can be used to generate other synthetically chal-lenging mixed-metal oxides and readily scale to meet the needs of commercial applications.

  • Alkali and alkaline earth ion exchange affinity in ETS-10 toward aqueous lithium separation

    by Winters Kexi Guo, Derek R. Zhu, Grant Zeszutek, Emma Rosko, Michael J. Janik, Gina Noh


  • Open Access

    Improved Selectivity and Stability in Methane Dry Reforming by Atomic Layer Deposition on Ni-CeO2–ZrO2/Al2O3 Catalysts

    by Jonathan Lucas, Nirenjan Shenoy Padmanabha Naveen, Michael J. Janik, Konstantinos Alexopoulos, Gina Noh, Divakar Aireddy, Kunlun Ding, James A. Dorman, Kerry M. Dooley

    Ni can be used as a catalyst for dry reforming of methane (DRM), replacing more expensive and less abundant noble metal catalysts (Pt, Pd, and Rh) with little sacrifice in activity. Ni catalysts deactivate quickly under realistic DRM conditions. Rare earth oxides such as CeO2, or as CeO2-ZrO2-Al2O3 (CZA), are supports that improve both the activity and stability of Ni DRM systems due to their redox activity. However, redox-active supports can also enhance the undesired reverse water gas shift (RWGS) reaction, reducing the hydrogen selectivity. In this work, Ni on CZA was coated with an ultrathin Al2O3 overlayer using atomic layer deposition (ALD) to study the effects of the overlayer on catalyst activity, stability, and H2/CO ratio. A low-conversion screening method revealed improved DRM activity and lower coking rate upon the addition of the Al2O3 ALD overcoat, and improvements were subsequently confirmed in a high-conversion reactor at long times onstream. The overcoated samples gave an H2/CO ratio of ∼1 at high conversion, much greater than uncoated catalysts, and no evidence of deactivation. Characterization of used (but still active) catalysts using several techniques suggests that active Ni is in formal oxidation state >0, Ni-Ce-Al is most likely present as a mixed oxide at the surface, and a nominal thickness of 0.5 nm for the Al2O3 overcoat is optimal.


  • Quantifying the Affinity Difference between Lithium and Close Identity Ions Using ETS-10 Titanosilicate

    by Winters Kexi Guo, Emma Rosko, Grant Zeszutek, Uriahe DeVore, Xueyi Zhang, Michael J. Janik, Gina Noh