Mehrdad Lotfi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mehrdad Lotfi has a total of 148 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Ali Saghiri
Department of Computer Science, William Paterson University, Wayne, NJ 07470, USA
40 shared publications - Vahid Zand
Department of Endodontics, Faculty of Dentistry, Tabriz University of Medical Sciences, Tabriz, Iran
15 shared publications - Sepideh Vosoughhosseini
Department of Oral and Maxillofacial Pathology, Dental School, Tabriz University of Medical Sciences, Tabriz, Iran
13 shared publications - Saeed Rahimi
Dental and Periodontal Research Center, Department of Endodontics, Faculty of Dentistry, Tabriz University of Medical Sciences, Tabriz, Iran
11 shared publications - Shahriar Shahi
Dental and Periodontal Research Center, Tabriz University of Medical Sciences, Tabriz, Iran
11 shared publications James L. Gutmann
Department of Restorative Sciences, Texas A&M University College of Dentistry
10 shared publications
Latest Publications
- 1 March 2018
- Published by IOP Publishing in Materials Research Express
- Vol. 5 (3) , 035406
Fabrication of novel dental nanocomposites and investigation their physicochemical and biological properties
- 1 March 2018
- Published by IOP Publishing in Materials Research Express
- Vol. 5 (3) , 035406
Fabrication of novel dental nanocomposites and investigation their physicochemical and biological properties
- Open Access
- 1 January 2018
- Published by Medknow in Dental Research Journal
- Vol. 15 (2) , 146-149
Effect of containing silica fume on cytotoxicity of white mineral trioxide aggregate
Background: Mineral trioxide aggregate (MTA) has a high biocompatibility and its physical properties could be improved by adding the containing silica fume an amorphous silicon dioxide (condensed silica fume [CSF]). The aim of this study was to evaluate the cytotoxicity of MTA mixed with CSF on the viability of L929 mouse fibroblast cell using 3-(4,5-dimethylthiazol-2-Yl)-2,5-diphenyltetrazolium bromide reduction assay (MTT assay). Materials and Methods: In this in vitro study white MTA was mixed with distilled water according to the manufacturer's instructions. Mixtures of White MTA with 10%, 15%, and 20% CSF by weight were prepared and mixed with distilled water. Cytotoxicity of mixtures was compared with MTT assay on L929 mouse fibroblast cell line after 24, 48, and 72 h. Differences in cytotoxicity were assessed by one-way analysis of variance (ANOVA). Results: Mean ± SD of vital cell counts cultured in MTA, MTA + 10% CSF, MTA + 15% CSF, and MTA + 20% CSF were 98% ± 6%, 97% ± 6%, 94% ± 4%, and 98% ± 4%, respectively. One-way ANOVA did not reveal any statistically significant difference between the groups (P > 0.05). Conclusion: It may be concluded that addition of CSF to MTA may not influence its cytotoxicity.
- 1 January 2018
- Published by Medknow in Dental Research Journal
- Vol. 15 (2) , 146-149
Open AccessEffect of containing silica fume on cytotoxicity of white mineral trioxide aggregate
Background: Mineral trioxide aggregate (MTA) has a high biocompatibility and its physical properties could be improved by adding the containing silica fume an amorphous silicon dioxide (condensed silica fume [CSF]). The aim of this study was to evaluate the cytotoxicity of MTA mixed with CSF on the viability of L929 mouse fibroblast cell using 3-(4,5-dimethylthiazol-2-Yl)-2,5-diphenyltetrazolium bromide reduction assay (MTT assay). Materials and Methods: In this in vitro study white MTA was mixed with distilled water according to the manufacturer's instructions. Mixtures of White MTA with 10%, 15%, and 20% CSF by weight were prepared and mixed with distilled water. Cytotoxicity of mixtures was compared with MTT assay on L929 mouse fibroblast cell line after 24, 48, and 72 h. Differences in cytotoxicity were assessed by one-way analysis of variance (ANOVA). Results: Mean ± SD of vital cell counts cultured in MTA, MTA + 10% CSF, MTA + 15% CSF, and MTA + 20% CSF were 98% ± 6%, 97% ± 6%, 94% ± 4%, and 98% ± 4%, respectively. One-way ANOVA did not reveal any statistically significant difference between the groups (P > 0.05). Conclusion: It may be concluded that addition of CSF to MTA may not influence its cytotoxicity.
- Open Access
- 2 July 2017
- Published by Maad Rayan Publishing Company
- Vol. 12 (3) , 293-297
Bond Strength of White Mineral Trioxide Aggregate with and without Disodium Hydrogen Phosphate with Different Liquid-to-Powder Ratios
Mineral trioxide aggregate (MTA) can be used in the treatment of irritated vital pulp and repair of root perforations. However, the initial reaction of inflammatory cells to this material and also its setting time are not ideal. Studies have shown that disodium hydrogen phosphate (DHP), decreases the setting time of MTA, with no effect on its pH. This study was undertaken to evaluate the effect of DHP on push-out bond strength of MTA at different liquid-to-powder ratios. A total of 120 samples were prepared from the middle third of the roots of single-rooted teeth for evaluation of push-out bond strength. The push-out bond strength was measured in both groups after 72 h at different liquid-to-powder ratios, including 0.33:1, 0.5:1 and 0.6:1. Factorial ANOVA and Tukey’s HSD post-hoc tests were used to compare the differences between the independent groups. Statistical significant was set at P<0.05. The push-out bond strengths of pure MTA and MTA+DHP groups were 10.96±5.78 and 13.32±5.03, respectively. Tukey’s HSD post-hoc test revealed significant differences between the two groups. Furthermore, there were no interactive effect between material and the liquid: powder ratio. Incorporation of DHP into MTA resulted in an increase in push-out bond strength of MTA, and an increase in liquid-to-powder ratio resulted in a decrease in push-out bond strength.
- 2 July 2017
- Published by Maad Rayan Publishing Company
- Vol. 12 (3) , 293-297
Open AccessBond Strength of White Mineral Trioxide Aggregate with and without Disodium Hydrogen Phosphate with Different Liquid-to-Powder Ratios
Mineral trioxide aggregate (MTA) can be used in the treatment of irritated vital pulp and repair of root perforations. However, the initial reaction of inflammatory cells to this material and also its setting time are not ideal. Studies have shown that disodium hydrogen phosphate (DHP), decreases the setting time of MTA, with no effect on its pH. This study was undertaken to evaluate the effect of DHP on push-out bond strength of MTA at different liquid-to-powder ratios. A total of 120 samples were prepared from the middle third of the roots of single-rooted teeth for evaluation of push-out bond strength. The push-out bond strength was measured in both groups after 72 h at different liquid-to-powder ratios, including 0.33:1, 0.5:1 and 0.6:1. Factorial ANOVA and Tukey’s HSD post-hoc tests were used to compare the differences between the independent groups. Statistical significant was set at P<0.05. The push-out bond strengths of pure MTA and MTA+DHP groups were 10.96±5.78 and 13.32±5.03, respectively. Tukey’s HSD post-hoc test revealed significant differences between the two groups. Furthermore, there were no interactive effect between material and the liquid: powder ratio. Incorporation of DHP into MTA resulted in an increase in push-out bond strength of MTA, and an increase in liquid-to-powder ratio resulted in a decrease in push-out bond strength.
- 2 May 2017
- Published by Springer Nature in Research on Chemical Intermediates
- Vol. 1 (10) , 3-5722
Synthesis and characterization of potential multifunctional methacrylate-based dental monomers
- 2 May 2017
- Published by Springer Nature in Research on Chemical Intermediates
- Vol. 1 (10) , 3-5722
Synthesis and characterization of potential multifunctional methacrylate-based dental monomers
- 1 January 2017
- Published by Japanese Society for Dental Materials and Devices in Dental Materials Journal
- Vol. 36 (1) , 8-18
Calcium silicate-based cements and functional impacts of various constituents
Calcium silicate-based cements have superior sealing ability, bioactivity, and marginal adaptation, which make them suitable for different dental treatment applications. However, they exhibit some drawbacks such as long setting time and poor handling characteristics. To overcome these limitations calcium silicates are engineered with various constituents to improve specific characteristics of the base material, and are the focus of this review. An electronic search of the PubMed, MEDLINE, and EMBASE via OVID databases using appropriate terms and keywords related to the use, application, and properties of calcium silicate-based cements was conducted. Two independent reviewers obtained and analyzed the full texts of the selected articles. Although the effects of various constituents and additives to the base Portland cement-like materials have been investigated, there is no one particular ingredient that stands out as being most important. Applying nanotechnology and new synthesis methods for powders most positively affected the cement properties.
- 1 January 2017
- Published by Japanese Society for Dental Materials and Devices in Dental Materials Journal
- Vol. 36 (1) , 8-18
Calcium silicate-based cements and functional impacts of various constituents
Calcium silicate-based cements have superior sealing ability, bioactivity, and marginal adaptation, which make them suitable for different dental treatment applications. However, they exhibit some drawbacks such as long setting time and poor handling characteristics. To overcome these limitations calcium silicates are engineered with various constituents to improve specific characteristics of the base material, and are the focus of this review. An electronic search of the PubMed, MEDLINE, and EMBASE via OVID databases using appropriate terms and keywords related to the use, application, and properties of calcium silicate-based cements was conducted. Two independent reviewers obtained and analyzed the full texts of the selected articles. Although the effects of various constituents and additives to the base Portland cement-like materials have been investigated, there is no one particular ingredient that stands out as being most important. Applying nanotechnology and new synthesis methods for powders most positively affected the cement properties.
- 26 April 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (49) , 43127-43146
Functional dendritic compounds: potential prospective candidates for dental restorative materials and in situ re-mineralization of human tooth enamel
Dental caries and dentin hypersensitivity are the most common clinical diseases in oral health worldwide. Depending on the extent of tooth damage, various approaches can be used to repair teeth. When caries break in more than half of the tooth enamel, a dentist removes the decayed materials and replaces it with appropriate materials. The most commonly used restorative materials are amalgam, dental porcelain (dental ceramic), gold, glass ionomer, and resin-based composites. It is a decisive fact that a great deal of research effort has focused on the design of new photoinitiators, monomers, and telechelic oligomers in the field of resin-based dental composites in order to achieve interesting materials with improved physicochemical properties. In this respect, a novel achievement with multifunctional dendrimers is their dental restorative materials performance, because they exhibit suitable polymer mechanical properties, and reduce shrinkage or shrinkage stress when compared with other similar molecular weight molecules. They possess a high number of functional end groups, and a high degree of conversion. Furthermore, in dendrimer-based dental restorative materials the high cross-link density, as a result of the large number of reactive functional end groups provide some advantages such as a three-dimensional network, decreases solubility and water sorption, improve the mechanical and thermal properties of the resin. Moreover, multifunctional dendrimers can be used in regeneration of human tooth enamel. From the practical point of view, approximately all conducted research in this area has been focused on regeneration of human tooth enamel by a poly(amido amine) (PAMAM) dendrimer, in part due to the capability of this dendrimer in the crystallization process of hydroxyapatite (HA). This review provides a snapshot of recent progress in the synthesis and application of dendrimers in dental restorative materials, and in situ re-mineralization of human tooth enamel.
- 26 April 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (49) , 43127-43146
Functional dendritic compounds: potential prospective candidates for dental restorative materials and in situ re-mineralization of human tooth enamel
Dental caries and dentin hypersensitivity are the most common clinical diseases in oral health worldwide. Depending on the extent of tooth damage, various approaches can be used to repair teeth. When caries break in more than half of the tooth enamel, a dentist removes the decayed materials and replaces it with appropriate materials. The most commonly used restorative materials are amalgam, dental porcelain (dental ceramic), gold, glass ionomer, and resin-based composites. It is a decisive fact that a great deal of research effort has focused on the design of new photoinitiators, monomers, and telechelic oligomers in the field of resin-based dental composites in order to achieve interesting materials with improved physicochemical properties. In this respect, a novel achievement with multifunctional dendrimers is their dental restorative materials performance, because they exhibit suitable polymer mechanical properties, and reduce shrinkage or shrinkage stress when compared with other similar molecular weight molecules. They possess a high number of functional end groups, and a high degree of conversion. Furthermore, in dendrimer-based dental restorative materials the high cross-link density, as a result of the large number of reactive functional end groups provide some advantages such as a three-dimensional network, decreases solubility and water sorption, improve the mechanical and thermal properties of the resin. Moreover, multifunctional dendrimers can be used in regeneration of human tooth enamel. From the practical point of view, approximately all conducted research in this area has been focused on regeneration of human tooth enamel by a poly(amido amine) (PAMAM) dendrimer, in part due to the capability of this dendrimer in the crystallization process of hydroxyapatite (HA). This review provides a snapshot of recent progress in the synthesis and application of dendrimers in dental restorative materials, and in situ re-mineralization of human tooth enamel.
- Open Access
- 24 December 2015
- Vol. 11 (1) , 13-16
Tissue Reaction and Biocompatibility of Implanted Mineral Trioxide Aggregate with Silver Nanoparticles in a Rat Model
Biocompatibility and antimicrobial activity of endodontic materials are of utmost importance. Considering the extensive applications of mineral trioxide aggregate (MTA) in dentistry and antimicrobial properties of silver nanoparticles, this study aimed to evaluate the subcutaneous inflammatory reaction of rat connective tissues to white MTA with and without nanosilver (NS) particles. Polyethylene tubes (1.1×8 mm) containing experimental materials (MTA and MTA+NS and empty control tubes) were implanted in subcutaneous tissues of seventy-five male rats. Animals were divided into five groups (n=15) according to the time of evaluation: group 1; after 7 days, group 2; after 15 days, group 3; after 30 days, group 4; after 60 days and group 5; after 90 days. The inflammatory reaction was graded and data was analyzed using the Kruskal-Wallis and Mann-Whitney U tests. Statistical significance was defined at 0.05. Comparison of cumulative inflammatory reaction at all intervals revealed that the mean grade of inflammatory reaction to MTA, MTA+NS and control samples were 3, 2 and 2, respectively. According to the Mann-Whitney analysis there were no significant differences between MTA+NS and MTA (P=0.42). Incorporation of 1% nanosilver to MTA does not affect the inflammatory reaction of subcutaneous tissue in rat models.
- 24 December 2015
- Vol. 11 (1) , 13-16
Open AccessTissue Reaction and Biocompatibility of Implanted Mineral Trioxide Aggregate with Silver Nanoparticles in a Rat Model
Biocompatibility and antimicrobial activity of endodontic materials are of utmost importance. Considering the extensive applications of mineral trioxide aggregate (MTA) in dentistry and antimicrobial properties of silver nanoparticles, this study aimed to evaluate the subcutaneous inflammatory reaction of rat connective tissues to white MTA with and without nanosilver (NS) particles. Polyethylene tubes (1.1×8 mm) containing experimental materials (MTA and MTA+NS and empty control tubes) were implanted in subcutaneous tissues of seventy-five male rats. Animals were divided into five groups (n=15) according to the time of evaluation: group 1; after 7 days, group 2; after 15 days, group 3; after 30 days, group 4; after 60 days and group 5; after 90 days. The inflammatory reaction was graded and data was analyzed using the Kruskal-Wallis and Mann-Whitney U tests. Statistical significance was defined at 0.05. Comparison of cumulative inflammatory reaction at all intervals revealed that the mean grade of inflammatory reaction to MTA, MTA+NS and control samples were 3, 2 and 2, respectively. According to the Mann-Whitney analysis there were no significant differences between MTA+NS and MTA (P=0.42). Incorporation of 1% nanosilver to MTA does not affect the inflammatory reaction of subcutaneous tissue in rat models.
- Open Access
- 24 December 2015
- Vol. 11 (1) , 38-43
Postoperative Pain after Endodontic Treatment of Asymptomatic Teeth Using Rotary Instruments: A Randomized Clinical Trial
The aim of the present study was to compare the effect of two different rotary instruments on postoperative pain in teeth with asymptomatic irreversible pulpitis. A total of 78 mandibular first and second molars were divided into two groups (n=39) and their root canal preparation was carried out with either RaCe or ProTaper rotary instruments. All the subjects underwent one-visit root canal treatment and the severity of postoperative pain was evaluated using visual analog scale (VAS) at 4-, 12-, 24-, 48- and 72-h and 1-week intervals. In addition, the need for taking analgesics was recorded. Data were analyzed with the repeated-measures ANOVA and the Mann-Whitney U test was used for two-by-two comparison. Statistical significance was set at 0.05. Comparison of mean pain severity between the two groups at various postoperative intervals did not reveal any significant differences (P=0.10). The difference in amount of analgesics taken by each groups was not statistically significant (P=0.25). There were no significant differences in the postoperative pain reported between the two groups; which indicates the clinical acceptability of both systems.
- 24 December 2015
- Vol. 11 (1) , 38-43
Open AccessPostoperative Pain after Endodontic Treatment of Asymptomatic Teeth Using Rotary Instruments: A Randomized Clinical Trial
The aim of the present study was to compare the effect of two different rotary instruments on postoperative pain in teeth with asymptomatic irreversible pulpitis. A total of 78 mandibular first and second molars were divided into two groups (n=39) and their root canal preparation was carried out with either RaCe or ProTaper rotary instruments. All the subjects underwent one-visit root canal treatment and the severity of postoperative pain was evaluated using visual analog scale (VAS) at 4-, 12-, 24-, 48- and 72-h and 1-week intervals. In addition, the need for taking analgesics was recorded. Data were analyzed with the repeated-measures ANOVA and the Mann-Whitney U test was used for two-by-two comparison. Statistical significance was set at 0.05. Comparison of mean pain severity between the two groups at various postoperative intervals did not reveal any significant differences (P=0.10). The difference in amount of analgesics taken by each groups was not statistically significant (P=0.25). There were no significant differences in the postoperative pain reported between the two groups; which indicates the clinical acceptability of both systems.
- 8 January 2015
- Published by Wiley in Dental Traumatology
- Vol. 31 (3) , 196-201
Effect of particle size on calcium release and elevation of pH of endodontic cements
Background/Aim: Elevation of pH and calcium ion release are of great importance in antibacterial activity and the promotion of dental soft and hard tissue healing process. In this study, we evaluated the effect of particle size on the elevation of pH and the calcium ion release from calcium silicate‐based dental cements.Material and methods: Twelve plastic tubes were divided into three groups, filled with white mineral trioxide aggregate (WMTA), WMTA plus 1% methylcellulose, and nano‐modified WMTA (nano‐WMTA), and placed inside flasks containing 10 ml of distilled water. The pH values were measured using a pH sensor 3, 24, 72, and 168 h after setting of the cements. The calcium ion release was measured using an atomic absorption spectrophotometer with same sample preparation method. Data were subjected to two‐way analysis of variance (anova) followed by post hoc Tukey tests with significance level of P < 0.05.Results: Nano‐WMTA showed significant pH elevation only after 24 h (P < 0.05) compared with WMTA, and after 3, 24, and 72 h compared with WMTA plus 1% methylcellulose (P < 0.05). Nano‐WMTA showed significantly higher calcium ion release values compared to the other two groups (P < 0.05).Conclusions: Nano‐modification of WMTA remarkably increased the calcium ion release at all time intervals postsetting, which can significantly influence the osteogenic properties of human dental pulp cells and as a consequence enhance mineralized matrix nodule formation to achieve desirable clinical outcomes. However, the increase in pH values mainly occurred during the short time postsetting. Addition of 1% methylcellulose imposed a delay in elevation of pH and calcium ion release by WMTA.
- 8 January 2015
- Published by Wiley in Dental Traumatology
- Vol. 31 (3) , 196-201
Effect of particle size on calcium release and elevation of pH of endodontic cements
Background/Aim: Elevation of pH and calcium ion release are of great importance in antibacterial activity and the promotion of dental soft and hard tissue healing process. In this study, we evaluated the effect of particle size on the elevation of pH and the calcium ion release from calcium silicate‐based dental cements.Material and methods: Twelve plastic tubes were divided into three groups, filled with white mineral trioxide aggregate (WMTA), WMTA plus 1% methylcellulose, and nano‐modified WMTA (nano‐WMTA), and placed inside flasks containing 10 ml of distilled water. The pH values were measured using a pH sensor 3, 24, 72, and 168 h after setting of the cements. The calcium ion release was measured using an atomic absorption spectrophotometer with same sample preparation method. Data were subjected to two‐way analysis of variance (anova) followed by post hoc Tukey tests with significance level of P < 0.05.Results: Nano‐WMTA showed significant pH elevation only after 24 h (P < 0.05) compared with WMTA, and after 3, 24, and 72 h compared with WMTA plus 1% methylcellulose (P < 0.05). Nano‐WMTA showed significantly higher calcium ion release values compared to the other two groups (P < 0.05).Conclusions: Nano‐modification of WMTA remarkably increased the calcium ion release at all time intervals postsetting, which can significantly influence the osteogenic properties of human dental pulp cells and as a consequence enhance mineralized matrix nodule formation to achieve desirable clinical outcomes. However, the increase in pH values mainly occurred during the short time postsetting. Addition of 1% methylcellulose imposed a delay in elevation of pH and calcium ion release by WMTA.
- 18 December 2014
- Published by Wiley in Dental Traumatology
- Vol. 31 (2) , 161
Response from the authors.
- 18 December 2014
- Published by Wiley in Dental Traumatology
- Vol. 31 (2) , 161
Response from the authors.