LSLei Shi

Lei Shi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lei Shi has a total of 110 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ultrasmall Strained RuO2 as a Highly Efficient Electrocatalyst for Acidic Oxygen Evolution Reaction

    by Sheng Zhao, Liang Wu, Xianbing Miao, Yujie Di, Lei Shi, Shiming Zhou

    The development of noniridium electrocatalysts toward acidic oxygen evolution reaction (OER) is essential for designing efficient proton-exchange-membrane water electrolyzers (PEMWEs) for hydrogen production. Ruthenium oxide has long been expected as a promising candidate but still suffers from inadequate durability. Here we deploy a strain engineering strategy to improve the OER performance. Density functional theory calculations demonstrate that introducing tensile strain into the RuO2 lattice can concurrently optimize the adsorption behavior and enhance the structural stability. Experimentally, we successfully synthesized tensile-strained RuO2 nanoparticles via a graphene oxide confinement method. This catalyst exhibits a low-record overpotential of 136 mV and a high durability over 160 h at 10 mA cm-2 in acidic media. When integrated into a PEMWE device, an exceptional water splitting performance is achieved with a large current density of 3.45 A cm-2 at 1.8 V and a long-term operation at 0.2 A cm-2 for 120 h, suggesting its potential for practical applications.


  • Pseudosymmetric Epitaxy for Scalable Growth of Uniform Two-Dimensional Ferroelectric α-In2Se3 Monolayer

    by Lei Xu, Zhenhua Wu, Yutao Han, Mingzheng Wang, Jiao Li, Chen Chen, Lin Wang, Yakun Yuan, Lei Shi, Joan M. Redwing, et al.

    The 2D ferroelectric semiconductor α-In2Se3 offers compelling opportunities for next-generation ultrathin electronics, but the controllable growth of a monolayer with large-scale uniformity and single phase has proven challenging. Here, we demonstrate the pseudosymmetry epitaxial growth of a uniform centimeter-scale α-In2Se3 monolayer by leveraging a fluorophlogopite mica (F-mica) substrate with its pseudohexagonal surface atom configuration, in a confined space chemical vapor deposition setup. Transmission electron microscopy and in-plane XRD reveal the pseudohexagonal symmetry of an F-mica surface and establish the in-plane epitaxial relation of (100) α-In2Se3∥(010) F-mica with a 4 × 4 α-In2Se3 unit cell matching the 3×3 F-mica surface. Second-harmonic generation and piezoresponse force microscopy confirm the homogeneity and polarization of the films. A ferroelectric semiconductor junction array based on the α-In2Se3 films exhibits consistent and reliable multipattern memorization and an enhanced On/Off ratio over 105. Our strategies offer critical insights into pseudosymmetric epitaxy of 2D materials and pave the way for advanced ultrathin ferroelectric memory technologies.


  • Open Access

    Electronegative effect in layered double-perovskite La1.9Ba0.1CuSnO6 adjusted by non-magnetic Zn doping

    by Liping Yang, Lei Shi, Jinhui Zhang, Ruixue Tong

    The La1.9Ba0.1Cu1−yZnySnO6 (0 ≤ y ≤ 0.25) (LBCZSO) ceramics were synthesized by the solid-state reaction, and the effect of non-magnetic Zn2+ ion doping on the crystal structure and electrical and magnetic properties is systematically investigated. It is found that all the samples are layered double perovskite with a space group P21/m. The resistivity ρ(T) shows a semiconductor behavior, which follows Mott's 3D variable-range hopping mode. The magnetizations M(T) and the isothermal M-H loops reveal the coexistence of ferromagnetic (FM) and antiferromagnetic (AFM) interactions in the 2D CuO2 layer. With increasing Zn doping at Cu sites, the resistivity ρ(T) increases, the FM transition temperature TC decreases, the FM/AFM interactions weaken/enhance, and the ground state of the system changes from FM to AFM one. It is suggested that cationic electronegativity plays an important role in understanding the transport and magnetic properties of the non-magnetic Zn-doped La1.9Ba0.1CuSnO6, besides the cationic radius. Since the smaller electronegativity of Cu2+ ions compared to that of Sn4+ ions, the CuO6 octahedral distortion with the in-plane compressive strain and out-plane tensile strain is induced by the lattice mismatch between CuO2 and SnO2 layers, forming C-type AF structure with the spin-canted weak FM in 2D CuO2 plane. Since the different cationic electronegativities of Zn2+ and Cu2+ ions, non-magnetic Zn doping leads to the charge transfer between Zn and Cu ions, resulting in the electronic redistribution (transformation) along the ordered Cu–O–Zn chains and non-magnetic Cu+ ions in LBCZSO, which further speeds up the decrease of TC, lead to the abnormal change in the hopping energy W and Curie temperature Θ. Besides, it is confirmed that there is a spin-glass state transition at around 26 K in the non-magnetic Zn doping La1.9Ba0.1CuSnO6 compound.


  • A new-type high-entropy electrocatalyst with a pyrochlore structure for acid-water oxidation

    by Jinhui Zhang, Lei Shi, Xianbing Miao, Liping Yang, Shiming Zhou

    Owing to their highly tailorable electrochemical characteristics and exceptional reactivity, high-entropy materials represent the next generation of water splitting catalysts. In this work, rare earth elements (Ho, Dy, Pr and Gd) were equivalently co-doped into the A-site of Y2Ru2O7, successfully resulting in a new-type high-entropy pyrochlore (Y0.2Ho0.2Dy0.2Gd0.2Pr0.2)2Ru2O7 (HE-YRO). The electrocatalyst presents an extremely low overpotential (η = 200 mV) and unobvious inactivation during stability testing at 10 mA cm−2. More remarkably, at η = 270 mV, it shows an excellent inherent mass activity of 797.1 A gRu −1. By analyses of related pyrochlore oxides, several characteristics are confirmed for the HE-YRO electrocatalyst, which endow it with the high oxygen-evolution reaction (OER) performance. First of all, compared to those in YRO, more low-valent Ru3+ species and oxygen vacancies are induced in the HE-YRO structure, which improves the performance. Secondly, inhibition of the grain coarsening is caused by the lattice distortion, which would lead to large surface areas for HE-YRO and then increase the OER active sites. Thirdly, the Ru 4d band is extended, which results in an enhancement of conductivity and a strengthened hybridization between O 2p and Ru 4d orbitals, and then improves the reaction kinetics of the OER. Therefore, the synergistic effect of the above factors that are induced by the equivalent multielement doping at the A-site results in the superior OER performance and chemical durability of the HE-YRO electrocatalyst for acid-water oxidation. This work not only presents a novel method for creating advanced materials for obtaining renewable and clean energy but also validates the efficacy of high-entropy design.


  • Promotion of Acid–Water Oxidation by Lattice Distortion and Orbital Hybridization Induced by Ionic Dopant in Pyrochlore Y2Ru2O7

    by Jinhui Zhang, Lei Shi, Xianbing Miao, Shiming Zhou, Liping Yang

    For acid-water oxidation, pyrochloric ruthenates are thought to be extremely effective electrocatalysts. In this work, through partial B-site replacement with larger M2+ cations, the electronic states of Y2Ru2O7 with strong electron correlations are reasonably managed, by which the inherent performance is tremendously promoted. Based on this, the improved Y2Ru1.9Sr0.1O7 electrocatalyst exhibits an outstanding durability and presents a highly inherent mass activity of 1915.1 A gRu-1 (at 1.53 V vs RHE). The enhanced oxygen-evolving reaction (OER) activity by ionic dopant in YRO pyrochlore can be attributed to two aspects, i.e., the lattice distortion induced inhibition of the grain coarsening, which results in a large surface area for YRO-M and increases the OER active sites, and the weakening of electron correlation via broadening of the Ru 4d bandwidths due to the increase of the average radius of B-site ions, which gives rise to an enhancement of conductivity and a strengthened hybridization between Ru 4d and O 2p orbitals and improves the reaction kinetics. The synergistic effects of lattice distortion and orbital hybridization promote the enhanced OER activity. The results would provide fresh concepts for the design of improved electrocatalysts and underscore the significance of managing the intrinsic performance through the dual modification of microstructure morphology and electronic structure.


  • Highly Active Pyrochlore-Type Praseodymium Ruthenate Electrocatalyst for Efficient Acid–Water Oxidation

    by Jinhui Zhang, Lei Shi, Ruixue Tong, Liping Yang

    To produce directly combustible hydrogen from water, highly active, acid-resistant, and economical catalysts for oxygen evolution reaction (OER) are needed. An electrocatalyst based on praseodymium ruthenate (Pr2Ru2O7) is presented here that greatly outperforms RuO2 for acid-water oxidation. Specifically, at 10 mA cm-2, this electrocatalyst presents a low overpotential (η) of 213 mV and markedly superior stability. Moreover, Pr2Ru2O7 presents a significant rise in turnover frequency (TOF) and a highly intrinsic mass activity of 1618.8 A gRu-1 (η = 300 mV), exceeding the most commonly reported acid OER catalysts. Density functional theory calculations and electronic structure study demonstrate that the Ru 4d-band center related to the longer Ru-O bond with a large radius of Pr ion in this pyrochlore is lower than that in RuO2, which would optimize the binding between the adsorbed oxygen species and catalytic metal sites and enhance the catalytic intrinsic activity.


  • Negative magnetoresistance effect in Ba-doped layered double perovskite La2CuSnO6

    by Liping Yang, Lei Shi, Jiyin Zhao, Jinhui Zhang, Xianbing Miao, Xuguang Liu, Ruixue Tong


  • Open Access

    Tuning charge transfer and magnetic properties in LaCoO3/LaMnO3/LaCoO3 trilayers by oxygen content

    by Ruixue Tong, Lei Shi, Jiyin Zhao, Xuguang Liu, Shiming Zhou, Xianbing Miao, Jinhui Zhang, Liping Yang

    In this manuscript, perovskite oxide LaCoO3/LaMnO3/LaCoO3 (LLL) trilayers and the single-layer LaMnO3 (LMO) and LaCoO3 (LCO) films are epitaxially grown on (001)-oriented SrTiO3 substrates by polymer-assisted deposition combining with heat treating in Ar, air, and O2 atmospheres, respectively. The crystal structure and magnetic properties are investigated. It is found that the responses of LMO and LCO films to oxygen content are different, and the magnetic property of LMO is more sensitivity to oxygen content than that of LCO. The oxygen content can directly affect the structure and magnetic properties of LMO and LCO layers, which, in turn, modulate the interfacial magnetic properties of the LLL trilayers through interlayer coupling. By comparison with the magnetic properties of the single-layer films, an abnormal ferromagnetic (FM) transition is found in the LLL trilayers at around 216 K, besides two known FM transitions corresponding to those in the LCO and LMO layers, respectively. It is suggested that the abnormal FM transition is attributed to Mn4+–O–Co2+ FM super-exchange interaction, which is induced by the charge transfer from Mn3+ to Co3+ ions and the interlayer coupling between the LMO and LCO layers. The interlayer coupling of the trilayers, including the interfacial coupling and the diffusion-induced inlayer coupling, dominates the interface properties, which are tuned by oxygen content-dependent charge transfer. The cooperative function of the orbital/charge structure and the interlayer coupling dominates the magnetic properties of the LLL trilayer under the tensile strain. These findings provide new avenues to regulate the electronic and magnetic states of perovskite oxide multilayers and another way to the development of multifunctional electronic devices.