RRRoger Randriamampianina

Roger Randriamampianina

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Roger Randriamampianina has a total of 127 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Top Cited Papers
    Open Access

    Implementing digital twin technology of the earth system in Destination Earth

    by Nils Wedi, Irina Sandu, Peter Bauer, Mario Acosta, Rune Carbuhn Andersen, Ulf Andrae, Ludovic Auger, Gianpaolo Balsamo, Vasileios Baousis, Victoria Bennett, et al.


  • Open Access

    Digital twin for weather-induced extremes

    by Roger Randriamampianina, DestinE Extremes Digital Twin Team

    Our presentation aims to describe the development and operationalisation of the Destination Earth (DestinE) Extremes Digital Twin (DT), including the On-Demand component, a system designed to improve the prediction and management of extreme weather events in Europe. The system leverages high-resolution weather models using information from Extreme Detection (EDF) and Triggering (DTF) Frameworks, as well as ECMWF ensemble, incorporating impact-specific models for hydrology, air quality, renewable energy, and more. A key component is a configuration lookup table prioritising end-user needs and available resources. The system incorporates various masking techniques (ACCORD models configurations, geographical, capacity, event type) to refine forecasts. The presentation describes the system's architecture, data sources, and workflow, emphasising the integration of multiple models and data sources, and the use of cutting-edge technologies such as GPUs and machine learning for enhanced forecasting and efficient resource utilisation. Pilot regions are used for testing and operationalisation, with a phased approach planned for broader deployment. The project addresses challenges in forecasting accuracy, communication of uncertainty, and the integration of forecasts into decision-making processes across various sectors.

  • Open Access

    Exploring the footprint representation of microwave radiance observations in an Arctic limited-area data assimilation system

    by Máté Mile, Stephanie Guedj, Roger Randriamampianina

    The microwave radiances are key observations, especially over data-sparse regions, for operational data assimilation in numerical weather prediction (NWP). An often applied simplification is that these observations are used as point measurements; however, the satellite field of view may cover many grid points of high-resolution models. Therefore, we examine a solution in high-resolution data assimilation to better account for the spatial representation of the radiance observations. This solution is based on a footprint operator implemented and tested in the variational assimilation scheme of the AROME-Arctic (Application of Research to Operations at MEsoscale – Arctic) limited-area model. In this paper, the design and technical challenges of the microwave radiance footprint operator are presented. In particular, implementation strategies, the representation of satellite field-of-view ellipses, and the emissivity retrieval inside the footprint area are discussed. Furthermore, the simulated brightness temperatures and the sub-footprint variability are analysed in a case study, indicating particular areas where the use of the footprint operator is expected to provide significant added value. For radiances measured by the Advanced Microwave Sounding Unit-A (AMSU-A) and Microwave Humidity Sounder (MHS) sensors, the standard deviation of the observation minus background (OmB) departures is computed over a short period in order to compare the statistics of the default and the implemented footprint observation operator. For all operationally used AMSU-A and MHS tropospheric channels, it is shown that the standard deviation of OmB departures is reduced when the footprint operator is applied. For AMSU-A radiances, the reduction is around 1 % for high-peaking channels and about 4 % for low-peaking channels. For MHS data, this reduction is somewhere between 1 %–2 % by the footprint observation operator.


  • Open Access

    Exploring the footprint representation of microwave radiance observations in an Arctic limited-area data assimilation system

    by Máté Mile, Stephanie Guedj, Roger Randriamampianina

    The microwave radiances are key observations especially over data sparse regions for operational data assimilation in numerical weather prediction (NWP). An often applied simplification is that these observations are used as point measurements, however, the satellite field-of-view may cover many grid points of high-resolution models. Therefore, we examine a solution in high-resolution data assimilation to better account for the spatial representation of the radiance observations. This solution is based on a footprint operator implemented and tested in the variational assimilation scheme of the AROME-Arctic (Application of Research to Operations at Mesoscale – Arctic) limited-area model. In this paper, the design and technical challenges of the microwave radiance footprint operator are presented. In particular, implementation strategies, the representation of satellite field-of-view ellipses, and the emissivity retrieval inside the footprint area are discussed. Furthermore, the simulated brightness temperatures and the sub-footprint variability are analysed in a case study indicating particular areas where the use of the footprint operator is expected to provide significant added value. For radiances measured by the Advanced Microwave Sounding Unit-A (AMSU-A) and Microwave Humidity Sounder (MHS) sensors, the standard deviation of the observation minus background (OmB) departures are computed on a short period in order to compare the statistics of the default and the implemented footprint observation operator. For all operationally used AMSU-A and MHS channels, it is shown that the standard deviation of OmB departures is reduced when the footprint operator is applied.


  • Open Access

    Destination Earth On-Demand Extremes Digital Twin

    by Rogerr Randriamampianina, On-Demand Extremes Digital Twin Team

    Destination Earth (DE) On-Demand Extremes Digital Twin (DT) (DE_330_MF) offers configurable digital twin engines for forecasting environmental extremes at a sub-km scale. DE_330_MF aims at providing an on-demand workflow with co-design of high resolution predictions about extreme weather events combined with decision making support for impact sectors including hydrology, air quality and energy meteorology, with the use of a physics-based and data driven model system and computationally-intensive data-flow organised on the EuroHPC high performance computing platform. The DE_330_MF core software system is developed in four parts. Firstly, code adaptation needed for running on hybrid CPU and accelerator architectures will be done. Here, our most computationally intensive parts will be optimised for running on accelerators at the end of the first phase. Secondly, our modelling system is being adapted for running on a sub-km grid scale in an efficient on-demand setup. During phase 1 we primarily use operationally and pre-operationally mature components. Tailor-made modules targeted on impact modelling (e.g. wind energy) will be implemented as well. Thirdly, we work on post-processing of the model output, so that this can be distilled into a limited number of variables essential for end-users including uncertainty quantification for these variables. The approaches will be tailor-made for the specific targeted types of extreme events. Triggers for detecting extreme events are being developed as part of the post-processing work. Fourthly, and very importantly, we are designing and developing workflow management tools and scripting for the core software. Input and output data are also managed, with a particular focus on the exploitation of using high-density observations in high-resolution weather forecasting and verification. Overall we aim at running a hectometric scale On-Demand Extremes DT with a typical resolution of 750 or 500 m, exploring a finer resolution of up to 200 m for special applications where it is meaningful. In the first phase, capability demonstration is the focus by examining a range of carefully selected high-impact cases for the three above-mentioned impact areas, as well as other applications such as agriculture. The goal here is to explore the added values with co-designing workflow combining the on-demand, event- or user-driven solutions with weather forecasting on the one hand, and impact sectors on the other hand, in an integrated value chain for decision-making support. In this effort, containerised solutions, including one hydrological and two air quality models, will run next (one way coupling) to the on-demand extremes DT. This work is funded by the EU under agreement DE_330_MF between ECMWF and Météo-France. The on-demand capability proposed by the Météo-France led international partnership is a key component of the weather-induced extremes digital twin, which ECMWF will deliver in the first phase of Destination Earth, launched by the EC.


  • Open Access

    B-matrix estimation in the Copernicus European Regional Re-Analysis (CERRA)

    by Adam El-Said, Pierre Brousseau, Roger Randriamampianina, Martin Ridal

    A new augmented Ensemble of Data Assimilations (EDA) technique, which estimates background error covariances (B-matrix), has been developed for the new Copernicus European Regional Re-Analysis (CERRA-EDA). CERRA-EDA has 10 members with two main pools of forecast differences: seasonal and daily. The seasonal component is pre-prepared (`offline') at reanalysis-resolution (5.5km). The new augmentation governs the time-dependent mixture of winter and summer differences of this seasonal component with respect to the time of year. The daily component is (`online') and averaged in moving succession over 2.5 days with subsequent B-matrix computation every 2 days. This daily component runs at 11km and the forecasts are interpolated to 5.5km prior to use. The seasonal-daily split is set to a fixed value of 80-20\% for CERRA production. The EDA is cycled 6-hourly while CERRA has a 3-hour analysis cycle. The B-matrix is modelled on a bi-Fourier limited area weather model, where dependence of vertical correlations on horizontal scale (non-separability), horizontal homogeneity and isotropy are assumed. The mass-wind and specific humidity fields are related via vorticity and geopotential and the relationships are estimated via multiple linear regressions enforcing simplified analogues of flow-dependence. We demonstrate the potential of CERRA-EDA to estimate rapid changes in weather regime change over Europe by assessing B-matrix statistics and forecast skill scores in a case study. The case study assesses two like-periods bearing different weather regimes, Mar-03 (blocking regime) and Mar-18 (NAO- regime). The aptitude of the B-matrix to reflect weather regime change is shown to be mostly dependent on the observation network in a given year. We also illustrate the impact of: change in observation networks over time, and varying the seasonal-daily split. This is shown through analysing the spatio-temporal evolution of background standard deviations. Finally, analysis and forecast skill scores up to 24-hours are also shown to offer improvements worth considering.

  • Open Access

    Copernicus European regional reanalysis

    by Semjon Schimanke, Ludvig Isaksson, Lisette Edvinsson, Martin Ridal, Lars Berggren, Susanna Hopsch, Adam El-Said, Michael Glinton, Eric Bazile, Patrick Le Moigne, et al.

    The Copernicus European regional reanalysis (https://climate.copernicus.eu/regional-reanalysis-europe) is produced as part of the Copernicus Climate Change Service (C3S). The presentation will introduce the service and its main objectives as well as it will give and overview of available data. Data quality will be demonstrated by comparison with ERA5 and other gridded datasets.In the first phase of the service, systems inherited from the FP7 project UERRA (Uncertainties in Ensembles of Regional ReAnalyses, http://www.uerra.eu) were applied extending the UERRA-HARMONIE as well as the MESCAN-SURFEX datasets. These datasets contain analyses of the atmosphere, the surface and the soil. UERRA-HARMONIE is a full model system including a 3D-Var data assimilation scheme for upper air observations and an OI-scheme for surface observations. MESCAN-SURFEX is a complementary 2D surface analysis system interfaced to a land surface model. Data is available for entire Europe at a horizontal resolution of 11 km for UERRA-HARMONIE and at 5.5 km for MESCAN-SURFEX. The systems provide four analyses per day – at 0 UTC, 6 UTC, 12 UTC, and 18 UTC. Between the analyses ranges, forecasts of the systems are available with hourly resolution. More than fifty parameters are available on various level types. Data are available for the period 1961 – July 2019 through Copernicus Climate Data Store (CDS).In spring 2020, the service started the production of the next generation regional reanalysis. The successor comprises three components:- CERRA (5.5 km horizontal resolution)- CERRA-EDA (10-member ensemble at 11 km resolution)- CERRA-Land (5.5 km horizontal resolution)In addition to the higher resolution, CERRA is more sophisticated than UERRA. For instance, more observations are assimilated into CERRA, in particular remote sensing data. CERRA is produced with 3-hourly cycling and a flow depending part of the B-matrix is derived from CERRA-EDA. The production of CERRA, CERRA-EDA and CERRA-Land will complete in September/October 2021 and data will become available in the CDS shortly thereafter.The quality of the regional reanalysis in comparison to ERA5 will be shown with results of the standard HARMONIE-verification package as well as based on certain case studies. For instance, the winter storm Gudrun (January 2005, southern Sweden) will be investigated.


  • Open Access

    Use of Microwave Radiances from Metop-C and Fengyun-3 C/D Satellites for a Northern European Limited-area Data Assimilation System

    by Magnus Lindskog, Adam Dybbroe, Roger Randriamampianina

    MetCoOp is a Nordic collaboration on operational Numerical Weather Prediction based on a common limited-area km-scale ensemble system. The initial states are produced using a 3-dimensional variational data assimilation scheme utilizing a large amount of observations from conventional in-situ measurements, weather radars, global navigation satellite system, advanced scatterometer data and satellite radiances from various satellite platforms. A version of the forecasting system which is aimed for future operations has been prepared for an enhanced assimilation of microwave radiances. This enhanced data assimilation system will use radiances from the Microwave Humidity Sounder, the Advanced Microwave Sounding Unit-A and the Micro-Wave Humidity Sounder-2 instruments on-board the Metop-C and Fengyun-3 C/D polar orbiting satellites. The implementation process includes channel selection, set-up of an adaptive bias correction procedure, and careful monitoring of data usage and quality control of observations. The benefit of the additional microwave observations in terms of data coverage and impact on analyses, as derived using the degree of freedom of signal approach, is demonstrated. A positive impact on forecast quality is shown, and the effect on the precipitation for a case study is examined. Finally, the role of enhanced data assimilation techniques and adaptions towards nowcasting are discussed.


  • Open Access

    Relative impact of observations on a regional Arctic numerical weather prediction system

    by Roger Randriamampianina, Niels Bormann, Morten Andreas Ødegaard Køltzow, Heather Lawrence, Irina Sandu, Zheng Qi Wang

    The impact of Arctic conventional and satellite observations on regional short‐range weather forecasts is assessed using observing‐system experiments, in which observations are removed (denied) when creating the initial conditions of the forecasts. The experiments are conducted with the AROME‐Arctic regional mesoscale numerical weather prediction system, using as lateral boundary conditions (LBCs) observing‐system experiments performed at the European Centre for Medium‐Range Forecasts (ECMWF) with the global forecasting system. This allows the assessment of the relative impacts of observations on forecast skill through regional data assimilation (DA), through LBCs, and the total impact due to the denial of observations in both the regional and global forecasting systems. The study is conducted during the first and second Special Observing Periods of the Year Of Polar Prediction. The total impact on the upper‐air forecasts is dominated by the impact of observations through their assimilation in the LBCs, while for the winter period the impact on surface fields is dominated by the regional DA. The latter is significant up to 36 hr, while the former impact can last throughout the verified forecast range (48 hr). The use of observations in the LBCs has both significantly positive and significantly negative impacts. In terms of total impact on forecast skill, conventional observations, followed by infrared radiances, have the largest impact on all upper‐air parameters, except for humidity. For upper‐air humidity forecasts, the microwave radiances have the largest impact. In terms of observation impact through regional DA, conventional observations play the largest role for upper‐air temperature and geopotential, microwave for upper‐air humidity, and atmospheric motion vectors and Infrared Atmospheric Sounding Interferometer (IASI) for wind forecast. Regional DA of conventional observations also contributes the most to improvements of surface fields, except for 10‐m winds, for which the microwave temperature‐sensitive radiances are the most important.


  • Open Access

    Crowd‐sourced observations for short‐range numerical weather prediction: Report from EWGLAM/SRNWP Meeting 2019

    by Kasper S. Hintz, Callie McNicholas, Roger Randriamampianina, Hywel T. P. Williams, Bruce Macpherson, Marion Mittermaier, Jeanette Onvlee‐Hooimeijer, Balázs Szintai

    Crowd‐sourced observations (CSO) offer great potential for numerical weather prediction (NWP). This paper offers a synthesis of progress, challenges and opportunities in this area based on a special session of the EWGLAM Meeting in 2019, concentrating on high‐resolution limited‐area models (LAMs). Two main application areas of CSO are described: data assimilation and verification. One part of data assimilation developments concentrates on smartphone pressure observations, which represent a large volume of data. However, special care has to be taken about data protection and the quality of observations. In this paper, two examples are presented: the SMAPS experiment from Denmark and the uWx experiment from the United States. Another data assimilation topic is citizen observations with low‐cost weather sensors; here an example from Norway is presented using Netatmo stations. The other application area is the use of CSO for model verification. One novel method developed in the United Kingdom is applying social media data to detect severe weather events. This approach is especially important because one future application area of LAM NWP models is impact‐oriented warnings.