RIRodrigo Sebastian Iglesias

Rodrigo Sebastian Iglesias

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rodrigo Sebastian Iglesias has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Classifying the reactivity of volcanic rocks from the Serra Geral Group: an approach using a proposed Reactivity Index (RI)

    by Stephanie Carvalho da Silva, João Pedro Zielinski, Erico Albuquerque Santos, William Jeovanini Fucks, Antônio Rosales Gonçalves Oliveira, Pedro Sousa Costabile, Rodrigo Iglesias, Breno Leitão Waichel, Victor Hugo Jacks Santos, Felipe Dalla Vecchia, et al.

    The increasing global interest in CO₂ mineralization in basaltic rocks has led to studies within Large Igneous Provinces (LIPs), particularly focusing on their carbon storage potential. In South America, the Serra Geral Group (SGG), part of the Paraná-Etendeka Province, has been the subject of investigations due to its compositional diversity and extensive volcanic sequences. This study assesses the applicability of the Reactivity Index (RI) as a predictive tool for geochemical reactivity in six SGG volcanic rock samples, compared with two Icelandic basalts and one Columbia River Basalt (CRB). Results reveal RI values for SGG samples ranging from -11.1 to -6.7 log mol/s, aligning well with the observations from batch reactor experiments. Higher RI values were associated with increased reactivity, supporting the use of the index as a reliable proxy, especially in preliminary evaluations, although it does not account for textural characteristics or surface area variations. The samples from SGG, Icelandic, and CRB showed similar RI values. When integrated with petrography, surface area, and chemical data, the RI provides a promising tool for evaluating the reactivity of volcanic rocks in carbon storage strategies.

  • Open Access

    IDENTIFICATION OF POTENTIAL CO2 INJECTION ZONES IN THE SERRA GERAL GROUP: A GEOPHYSICAL ANALYSIS OF LEGACY DRILLED WELLS

    by Antônio Rosales Gonçalves Oliveira, João Pedro Tauscheck Zielinski, Erico Albuquerque Dos Santos, Stephanie Carvalho da Silva, William Jeovanini Fucks, Pedro Costabile Souza, Rodrigo Sebastian Iglesias, Breno Leitão Waichel, Victor Hugo Jacks Mendes dos Santos, Felipe Dalla Vecchia, et al.

    Os basaltos do Grupo Serra Geral (GSG), na Bacia do Paraná, têm despertado interesse devido ao seu potencial para mineralização de CO2. Apesar de sua ampla extensão (~787.000 km²), dados geológicos são limitados, dificultando a identificação de zonas de armazenamento. Este estudo propõe um fluxo de trabalho integrado baseado na interpretação de perfis geofísicos de quatro poços (1-PT-1-PR, 2-AN-1-PR, 1-API-1-PR e 1-AV-1-PR) situados em uma área com potencial para armazenamento geológico de CO2. O poço 1-PT-1-PR foi usado como modelo de referência e revelou padrões distintos de interiores de fluxo e horizontes entre os fluxos. A porosidade foi estimada utilizando uma relação entre velocidade e porosidade baseada nas velocidades da onda P. Foram identificadas zonas de alta porosidade (Φ >10%), associadas a topos ou bases de derrames e derrames compostos. Intervalos de alta porosidade apresentaram valores de densidade reduzida (~2 g/cm³), porosidade até 30% e velocidades de onda P baixas (~3,1 km/s). Nos demais poços, também foram identificados múltiplos intervalos de alta porosidade, com “net-to-gross” variando entre 19% e 43%. Picos de raios gama, excursões positivas no perfil de caliper e valores reduzidos de resistividade sustentam a presença de zonas porosas e alteradas. Os resultados indicam a recorrência e possível continuidade lateral desses intervalos, reforçando sua viabilidade como reservatórios. O método aplicado contribui para delimitar zonas potenciais para futura injeção de CO2 no GSG. Trabalhos futuros serão direcionados à correlação sub-regional, com o objetivo de embasar projetos de mineralização voltados a áreas específicas.

  • Open Access

    UNDERGROUND CO₂ MINERALIZATION POTENTIAL IN PARANÁ STATE: PRELIMINARY ASSESSMENT OF BASALTIC ROCKS FROM SERRA GERAL GROUP

    by Erico Albuquerque dos Santos, João Pedro Tauscheck Zielinski, Stéphanie Carvalho da Silva, Antônio Rosales Goncalves Oliveira, William Jeovanini Fucks, Pedro Costabile de Souza, Rodrigo Sebastian Iglesias, Breno Leitão Waichel, Victor Hugo Jacks Mendes dos Santos, Felipe Dalla Vecchia, et al.

    The Paraná Basin's CO2 geological storage potential is significant due to its coal deposits, saline formations, CO2 emission sources, and pipeline network. Recent interest has shifted to volcanic rocks containing divalent cations, facilitating mineral carbonation. The basin's volcanic rocks have an estimated CO2 storage capacity of 2,840 Gt and areas of ca. 174,000 km2 in total were identified in different parts of Brazil. Paraná State, with its vast geological data, is ideal for a detailed assessment, especially in the Serra Geral Group (SGG), which covers over half of the state. Using different methodologies, the CO2 storage capacity in this area was estimated between 79 to 654 Gt, with further research required for precise quantification and the identification of possible reservoirs for CO2 injection.

  • CO2‐water‐rock interactions in undeformed and sheared claystone caprocks from Northern Europe

    by Roland Vernooij, Tiago de Abreu Siqueira, Suzanne Hangx, Christopher Spiers, Marcelo Ketzer, Rodrigo Sebastian Iglesias

    One of the most promising, cost‐effective, and readily available technologies for reducing greenhouse gas emissions to the atmosphere is the capture and separation of CO2 from large stationary sources and storage in geological formations. Storage security, especially in the early stages of operation, is mostly guaranteed by caprock formations with very low permeability overlying the reservoir, capable of containing the injected fluid. Chemical alterations of the formation brine, caused by CO2 injection may cause dissolution and precipitation of secondary minerals, potentially increasing the risks of leakage from the reservoir. In order to evaluate these processes and their potential to induce the formation of leakage pathways in ultrafine fault gouges, a series of batch experiments was performed on crushed and sheared samples from three different caprock formations from Northern Europe (Sollingen, Röt and Opalinus claystones). The experiments were supported by numerical models of the kinetics of mineral dissolution and precipitation simulating the same experimental conditions, and over a longer time (10 000 years). Minor mineral alterations were observed after the batch experiments, the most important being: illite dissolution for the Opalinus and Röt formation samples, and dolomite dissolution and the transformation of illite and chlorite into kaolinite for the Sollingen sample. © 2020 Society of Chemical Industry and John Wiley & Sons, Ltd.


  • Modeling CO2 flow in support of a shallow subsurface controlled leakage field test

    by Rodrigo S. Iglesias, Cristiane Romio, Clarissa L. Melo, Ana Paula S. Musse, Fátima Do Rosário, Curtis M. Oldenburg


  • Characterization and modeling of CO2‐water‐rock interactions in Hygiene Sandstones (Upper Cretaceous), Denver Basin, aimed for carbon dioxide geological storage

    by Rodrigo S. Iglesias, J. Marcelo Ketzer, Anderson J. Maraschin, Gesiane Sbrissa

    Carbon capture and geological storage are among the most valuable technologies capable of reducing CO2 emissions. Long‐term interactions between CO2 and a reservoir, and the integrity of geological formations, are key factors in the selection of adequate reservoirs for permanent storage. Numerical models of CO2‐water‐rock geochemical interactions are often employed to predict the fate of CO2 stored in a reservoir over time. The Hygiene Sandstone, in the Denver Basin, Colorado, USA, is a geological formation with potential for CO2 storage, and was therefore studied in this work, in which we collected and characterized outcrop samples in order to supply the input parameters for numerical simulations. Four representative thin sections of Hygiene Sandstone outcrops were quantified in terms of detrital constituents, diagenesis, and porosity on the basis of conventional petrography. Sandstone mineralogy included, in decreasing order, quartz, K‐feldspar, muscovite, albite, illite, smectite, kaolinite, poikilotopic calcite, and siderite. Porosity ranged from 4% to 13%. A geochemical modeling study of CO2‐water‐rock interactions performed with two characterized samples and brine data from the Hygiene Sandstones, simulating reservoir conditions, suggested that the mineralogy of the sandstone is quite stable under the conditions that were tested and only minor mineralogical and porosity alterations would occur within a thousand years of storage. © 2018 Society of Chemical Industry and John Wiley & Sons, Ltd.


  • Carbon dioxide injection in carbonate reservoirs – a review of CO2‐water‐rock interaction studies

    by Tiago A. Siqueira, Rodrigo S. Iglesias, J. Marcelo Ketzer

    Carbon dioxide injection in geological formations is currently a common procedure in several reservoirs worldwide. More recently, it has been considered a permanent storage solution, avoiding emission to the atmosphere from large industrial sources. Also, it is largely employed in the oil & gas exploration industry, for enhanced oil recovery (EOR) operations. However, it is a known fact that injection of large amounts of CO2 into geological reservoirs may lead to a series of alterations due to chemical and physical interactions with minerals and fluids, especially in carbonate or carbonate‐rich reservoirs. Experimental and numerical models have been employed in many studies in the past, to investigate these effects on the geological environment. So far, most of these studies focused on siliciclastic formations, whereas carbonate reservoirs, which are known to be much more chemically reactive when interacting with CO2, were much less investigated. We present a review of experimental and numerical models that have been employed for studying CO2‐water‐rock interactions, and their application to the investigation of the impact in carbonate reservoir quality and integrity caused by the injection of carbon dioxide. © 2017 Society of Chemical Industry and John Wiley & Sons, Ltd.


  • Carbon capture and geological storage in Brazil: an overview

    by Rodrigo S. Iglesias, J. Marcelo Ketzer, Clarissa L. Melo, Roberto Heemann, Claudia X. Machado

    Brazil is recognized for possessing a low carbon‐intensive energy matrix, with most of its power being generated from hydroelectricity. Its greenhouse gas emissions profile is dominated by deforestation and land‐use change. Despite this characteristic, the country has been committed to the development of carbon capture and geological storage (CCS) research since this technology started to be recognized as a relevant solution for greenhouse gas emission reductions. This development has gained attention recently owing to the beginning of the production of pre‐salt reservoirs, which may contain significant amounts of CO2 in the produced fluids. The work has been carried out mostly through the efforts of the academia and industrial enterprises. This paper presents a summary and a brief description of the recent activities being carried out by these sectors, aiming to develop and promote CCS in Brazil.