Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Amey Khanolkar has a total of 139 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Characterization and interpretation of the thermal conductivity of the silicon carbide layer in irradiated TRISO fuel

    by Ethan Jacob Hisle, Tsvetoslav R. Pavlov, Amey R Khanolkar, Scott T. Anderson, Isaac J. Cutler, Narayan Poudel, Riley S. Moeykens, Matthew Goodson, John D. Stempien

  • Lattice anharmonicity effects in fluorite oxide single crystals and anomalous increase in phonon lifetime in ceria at elevated temperature

    by A. Khanolkar, S. Adnan, M. Minaruzzaman, L. Malakkal, D. B. Thomson, D. B. Turner, J. M. Mann, D. H. Hurley, M. Khafizov

    We investigate the temperature dependence of the frequency and linewidth of the triply degenerate T2g zone-centered optical phonon in flux-grown ceria and hydrothermally synthesized thoria single crystals from room temperature to 1273 K using Raman spectroscopy. Both crystals exhibit an expected increase in the phonon linewidth with temperature due to enhanced phonon–phonon scattering. However, ceria displays an anomalous linewidth reduction in the temperature range of 1023–1123 K. First-principles phonon linewidth calculations considering cubic and quartic phonon interactions within temperature-independent phonon dispersion fail to describe this anomaly. A parameterization of the temperature-dependent second-order interatomic force constants based on previously reported phonon dispersion measured at room and high temperatures predicts a deviation from the monotonic linewidth increase, albeit at temperatures lower than those observed experimentally for ceria. The qualitative agreement in the trend of temperature-dependent linewidth suggests that lattice anharmonicity-induced phonon renormalization plays a role in phonon lifetime. Specifically, a change in the overlap between softened acoustic and optical branches in the dispersion curve reduces the available phonon scattering phase space of the Raman-active mode at the zone center, leading to an increased phonon lifetime within a narrow temperature interval. These findings provide insights into higher-order anharmonic interactions in ceria and thoria, motivating further investigations into the role of anharmonicity-induced phonon renormalization on phonon lifetimes at high temperatures.


  • Open Access

    M3AS-25IN1002073: Analysis of data from irradiation testing of printed strain gauges in prototypic nuclear environments

    by Timothy Phero, Bibo Zhong, Michael D McMurtrey, Joshua Daw, Amey Rajendra Khanolkar, Md Bappy, Yanliang Zhang, Brian J. Jaques, Omarsany Bappy

    Advancement in additively manufactured strain gauges help address critical technology gaps to accurately monitor real-time materials behavior in reactor experiments. This is critical as it provides data to inform predictive models and simulations that enhance the development of reactors and fuel cycle systems. In this report, additively manufactured strain gauges are exposed to a neutron irradiation environment at the Ohio State University Research Reactor. This report goes over a 2-week campaign for neutron irradiating printed resistive strain gauges and capacitive strain gauges. These results complement the prior separate effects (i.e., mechanical strain, temperature, etc.) testing that were performed on these additive manufactured sensors and presented in prior milestone reports. These results also help progress our understanding of their usage in harsh environment applications. The outcome of developing advanced sensing and instrumentation capabilities plays an important role in increasing the safety, reliability, and energy efficiency of both next-generation and existing nuclear reactors.

  • Open Access

    Defect-induced phonon-resonant scattering and its influence on thermal transport of irradiated thorium-dioxide

    by Saqeeb Adnan, Amey R. Khanolkar, Zilong Hua, Minaruzzaman, Mutaz Alshannaq, Joshua Ferrigno, Timothy A. Prusnick, Miaomiao Jin, J. Matthew Mann, David H. Hurley, et al.

    Thermal transport in proton irradiated thorium-dioxide (ThO2) is investigated. Using a combination of experiments and first-principles computational framework, the role of lattice defects on thermal conductivity is analyzed. A resonant-phonon scattering mechanism beyond the traditionally considered Rayleigh scattering is found to significantly influence low-temperature thermal transport in the presence of irradiation-induced point defects. The existence of localized phonon modes associated with irradiation-induced defects is suggested by the inability of the first-principles based thermal conductivity model—which considers only three-phonon interactions and phonon-defects scattering using the Tamura formalism—to predict the experimental results, unless a resonant scattering mechanism is included. The emergence of additional peaks in the Raman spectra in the proximity of phonon-resonant frequency provides further evidence for the existence of localized modes. Coupled with a microstructure evolution model, this analysis enables more accurate analysis for contrasting the contributions of different phonon scattering mechanisms across all irradiation doses and temperatures.


  • Experimental confirmation of first-principles thermal conductivity in Zirconium-doped ThO2

    by Ella Kartika Pek, Zilong Hua, Amey Khanolkar, J. Matthew Mann, David B. Turner, Karl Rickert, Timothy A. Prusnick, Marat Khafizov, David H. Hurley, Linu Malakkal

  • Open Access

    Adhesion Testing of Direct-Write Printed Ink on Metallic Structural Components

    by Timothy L. Phero, Amey R. Khanolkar, James A. Smith, Bradley C. Benefiel, Shaun P. Evans, Michael D. McMurtrey, David Estrada, Brian J. Jaques

    The successful adoption of additive manufacturing for the rapid prototyping of direct-write printed electronics requires the establishment of quantifiable metrics. These metrics should directly interrogate the fabrication quality of the device during the manufacturing process. This implies that the characterization technique should be nondestructive. One measure of fabrication performance is the adhesion strength between the substrate and printed film interface, which is critical since the strength of this interface can dictate the accuracy and reliability of the printed device. In this work, a non-contact laser-induced spallation technique has been used to estimate the adhesion of silver printed films on aluminum alloy substrates. The laser-based method was compared to a standardized pull-off adhesion test, which provided baseline measurements of adhesion strength. These adhesion measurement techniques were compared against the sintering condition-dependent microstructure of the AM films. The porous structure of the printed thin film was found to be an important factor that impacted adhesion tests that utilize adhesives (i.e., glue, resins) due to an enhanced interlocking to the adherend surface. Due to its non-contact nature and insensitivity to thin samples/films, laser spallation was found to be a more reliable indication of process parameter change. The methods and results described in this work support the establishment of process control steps that are necessary for quickly verifying the reliability of printed devices prior to their deployment in critical experiments.


  • Open Access

    Molecular beam epitaxy of superconducting zirconium nitride on GaN substrates

    by Brelon J. May, Sabin Regmi, Amey R. Khanolkar, Volodymyr Buturlim, Zachery E. Cresswell, Kevin D. Vallejo, Krzysztof Gofryk, David H. Hurley

    Epitaxial integration of metals and semiconductors can enable enhanced performance and novel functionality. Achieving such pristine interfaces with superconducting materials is of increasing interest for quantum devices and detectors, but the experimental demonstration remains challenging, given the very limited studies on single crystalline systems. To expand the potential materials for these systems, this work explores the deposition of zirconium nitride superconducting thin films on GaN substrates at various temperatures using molecular beam epitaxy. A general trend of decreasing superconducting critical temperature is observed as the deposition temperature is reduced. The optical properties reveal a transition from metallic to dielectric behavior with colder deposition. The plasma frequency of the metallic films is also observed to be a function of growth temperature. These results pave the way for the integration of a highly tunable metal nitride with a well-established semiconductor system.


  • Application of printed strain gauges in prototypical nuclear reactor conditions

    by Timothy Phero, Amey Rajendra Khanolkar, Michael D McMurtrey, James Smith, Md Omarsany Bappy, Yanliang Zhang

    This report discusses the current development and testing of additively manufactured temperature sensors and resistive/ capacitive strain gauges. This has potential to improve the sensor design and manufacturing techniques to meet the requirements of in-pile monitoring of mechanical properties and structural health of materials and specimens in current and advanced nuclear test reactors (i.e., in terms of environment conditions, sample geometry, and materials compatibility). The developmental additively manufactured strain gauges are exposed to separate effects testing (i.e., mechanical strain (up to 1000 µe), high temperature (up to 700 °C)) to determine environmental factors that affect the performance of the strain gauge. The robustness and integrity of a printed strain gauge layer exposed to a molten salt environment for up to 500 hours was evaluated, with the goal of assessing material compatibility of printed strain sensors for instrumented surveillance test articles in molten salt reactors. In addition, sensor qualification methodologies are further developed for determining the reliability and robustness at the interface of the additively manufactured strain gauge materials.

  • Open Access

    Effects of irradiation damage on the hardness and elastic properties of quaternary and high entropy transition metal diborides

    by Amey Khanolkar, Amit Datye, Yan Zhang, Cody A. Dennett, Weiming Guo, Yang Liu, William J. Weber, Hua-Tay Lin, Yanwen Zhang

    Multi-principal component transition metal (TM) diborides represent a class of high-entropy ceramics (HECs) that have received considerable interest in recent years owing to their promising properties for extreme environment applications that include thermal/ environmental barriers, hypersonic vehicles, turbine engines, and next-generation nuclear reactors. While the addition of chemical disorder through the random distribution of TM elements on the cation sublattice has offered opportunities to tailor elastic stiffness and hardness, the effects of irradiation-induced structural damage on the physical properties of these complex materials have remained largely unexplored. To this end, changes in the hardness and elastic moduli of a high-entropy TM diboride (Hf0.2Nb0.2Ta0.2Ti0.2Zr0.2)B2 and three of its quaternary subsets following irradiation with 10 MeV gold (Au) ions to fluences of up to 6 × 1015 Au cm−2 are investigated at the micrometer and sub-micrometer length-scales via the dispersion of laser-generated surface acoustic waves (SAW) and nanoindentation, respectively. The nanoindentation measurements show that the TM diborides exhibit an initial increase in hardness following irradiation with energetic Au ions, with a subsequent decrease in hardness following further irradiation. One quaternary composition, (Hf1/3Ta1/3Ti1/3)B2, exhibits a notable exception to the trend and continues to exhibit an increase in hardness with ion irradiation fluence. Although differences in the absolute values of the effective elastic moduli obtained from the measured SAW dispersion and nanoindentation are observed (and attributed to microstructural variations at the measurement length-scale), both techniques yield similar trends in the form of an initial reduction and subsequent saturation in the elastic modulus with increasing ion irradiation fluence. The quaternary TM diboride (Hf1/3Ta1/3Ti1/3)B2 again exhibits a departure from this trend. The high-entropy TM diboride (Hf0.2Nb0.2Ta0.2Ti0.2Zr0.2)B2 exhibits the greatest recovery in hardness and modulus when irradiated to high ion fluences following initial changes at low fluence, indicating superior resistance to radiation-induced damage over its quaternary counterparts. Opportunities for designing HECs with superior hardness and modulus for enhanced radiation resistance (compared to their single constituent counterparts) by tailoring chemical disorder and bond character in the lattice are discussed.


  • Optical pulse-induced ultrafast antiferrodistortive transition in SrTiO3

    by Saqeeb Adnan, Amey Khanolkar, Shuxiang Zhou, David H. Hurley, Marat Khafizov

    The ultrafast dynamics of the antiferrodistortive phase transition in perovskite SrTiO3 is monitored via time-domain Brillouin scattering. Using femtosecond optical pulses, we initiate a thermally driven tetragonal-to-cubic structural transformation and detect the crystal phase through changes in the frequency of Brillouin oscillations (BO) induced by propagating acoustic phonons. Coupling the measured BO frequency with a spatiotemporal heat diffusion model, we demonstrate that, for a sample kept in the tetragonal phase, deposition of sufficient thermal energy induces a rapid transformation of the heat-affected region to the cubic phase. The initial phase change is followed by a slower reverse cubic-to-tetragonal phase transformation occurring on a timescale of hundreds of picoseconds. We attribute this ultrafast phase transformation in the perovskite to a structural resemblance between atomic displacements of the R-point soft optic mode of the cubic phase and the tetragonal phase, both characterized by anti-phase rotation of oxygen octahedra. The structural relaxation time exhibits a strong temperature dependence consistent with the prediction of the equation of motion describing collective oxygen octahedra rotation based on the energy landscape of the phenomenological Landau theory of phase transitions. Evidence of such a fast structural transition in perovskites can open up new avenues in information processing and energy storage sectors.