David E. Laughlin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
David E. Laughlin has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Jian-Gang Zhu
Carnegie Mellon University
13 shared publications - Caroline Gorham Holden
Independent Researcher, Colorado
10 shared publications - Michael Edward McHenry
Carnegie Mellon Univ., Pittsburgh, PA (United States)
5 shared publications - Brandon L. Reese
Carnegie Mellon University
4 shared publications - James A. Bain
Data Storage Systems Center, Carnegie Mellon University, Pittsburgh, PA, USA
4 shared publications - Hwansoo Lee
Department of Industrial Security, Dankook University, Yongin-si 16890, Korea
3 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 3200606
Multilayered Magnetic Recording Media by Flip-Disk Bonding
Wafer bonding is a common technique used within the semiconductor community. We provide a first demonstration of this technique as a method to potentially realize multilayered media for multi-level magnetic recording. The magnetic and structural properties of dual-layer L10-FePt / h-BN magnetic recording media were characterized using three different bonding conditions. It is shown that L10-FePt magnetic recording media can be joined using an intermediate bond layer with thickness of roughly 5 nm while retaining excellent magnetic and structural properties. Notably, no step-like feature is observed for magnetically hard dual-layer structures, the magnetic hysteresis of combined dual-layer recording media exhibited coercivities of 28.6 and 3.6 kOe along the out-of-plane and in-plane directions respectively.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 62 (10) , 3200606
Multilayered Magnetic Recording Media by Flip-Disk Bonding
Wafer bonding is a common technique used within the semiconductor community. We provide a first demonstration of this technique as a method to potentially realize multilayered media for multi-level magnetic recording. The magnetic and structural properties of dual-layer L10-FePt / h-BN magnetic recording media were characterized using three different bonding conditions. It is shown that L10-FePt magnetic recording media can be joined using an intermediate bond layer with thickness of roughly 5 nm while retaining excellent magnetic and structural properties. Notably, no step-like feature is observed for magnetically hard dual-layer structures, the magnetic hysteresis of combined dual-layer recording media exhibited coercivities of 28.6 and 3.6 kOe along the out-of-plane and in-plane directions respectively.
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-5
Chemical Ordering of Sputtered FePt/h-BN Granular Media Using RF Substrate Bias
Recently hexagonal-BN (h-BN)/L $1_{0}$ -FePt granular media has been proposed as an ideal candidate for next generation heat assisted magnetic recording (HAMR) media. The formation of crystalline h-BN at the FePt grain boundaries has resulted in significant enhancements to the sputtered media’s microstructural and magnetic properties. While it has been shown that high temperature and RF substrate bias are necessary to achieve highly crystalline h-BN at the grain boundaries, limited discussion has been given to the broader impact of substrate bias on the chemical ordering of FePt within this system. To further evaluate the influence of RF substrate bias on sputtered FePt/h-BN granular media, we have prepared several samples using different RF bias powers, 3 W/−21 VDC to 8 W/−70 VDC, on Corning NXT glass substrates. It was observed that the L $1_{0}$ chemical ordering of the system decreased with increased substrate bias over the above range. This behavior was confirmed in the magnetization data which also reflected a reduction of the out-of-plane coercivity from 32 to 10 kOe for the −21 and −70 VDC substrate bias samples respectively. In addition, energy dispersive spectroscopy (EDX) was used to probe the composition of the deposited h-BN/FePt films. This revealed a reduction in the Fe at% observed for all samples deposited with increased substrate bias. Relevant structural, microstructural, magnetic, and compositional data are presented below.
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (9) , 1-5
Chemical Ordering of Sputtered FePt/h-BN Granular Media Using RF Substrate Bias
Recently hexagonal-BN (h-BN)/L $1_{0}$ -FePt granular media has been proposed as an ideal candidate for next generation heat assisted magnetic recording (HAMR) media. The formation of crystalline h-BN at the FePt grain boundaries has resulted in significant enhancements to the sputtered media’s microstructural and magnetic properties. While it has been shown that high temperature and RF substrate bias are necessary to achieve highly crystalline h-BN at the grain boundaries, limited discussion has been given to the broader impact of substrate bias on the chemical ordering of FePt within this system. To further evaluate the influence of RF substrate bias on sputtered FePt/h-BN granular media, we have prepared several samples using different RF bias powers, 3 W/−21 VDC to 8 W/−70 VDC, on Corning NXT glass substrates. It was observed that the L $1_{0}$ chemical ordering of the system decreased with increased substrate bias over the above range. This behavior was confirmed in the magnetization data which also reflected a reduction of the out-of-plane coercivity from 32 to 10 kOe for the −21 and −70 VDC substrate bias samples respectively. In addition, energy dispersive spectroscopy (EDX) was used to probe the composition of the deposited h-BN/FePt films. This revealed a reduction in the Fe at% observed for all samples deposited with increased substrate bias. Relevant structural, microstructural, magnetic, and compositional data are presented below.
- 14 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (4) , 1-6
Thermal Conductance Analysis of the [FePt/h-BN/FePt] Interface
Heat-assisted magnetic recording (HAMR) requires a high thermal gradient in the recording media to suppress jitter noises. The FePt-(h-BN) granular film has been proposed as a promising medium due to the formation of columnar grains in the film structure. It is also expected to have a low in-plane (IP) thermal conductivity for enhanced thermal gradient. Accurate measurements of the thermal conductance of nanometer-scale thin films remain challenging, but multilayer structures can provide an important platform for studying the thermal transport in nanocomposite materials. Here, we report on the fabrication and thermal characterization of [h-BN/L$1_{\mathbf {0}}$ -FePt]$\times {N}$ multilayers, where h-BN nanosheets (2.5 nm thick) and L$1_{\mathbf {0}}$ -FePt layers (6.5 nm thick) alternate periodically. Differential$3\omega $ measurements reveal an ultralow effective thermal conductivity of 0.60 ± 0.05 W$\cdot $ m−1 K−1 across the multilayer films and a low thermal boundary conductance (TBC) of 67.9 ± 6.6 MW$\cdot $ m−2 K−1 for the [FePt/h-BN(2.5 nm)/FePt] interface at room temperature. The weak van der Waals bonding at the h-BN/FePt interface is considered the primary contributor to its high thermal resistance. This work can advance the understanding of thermal transport across the 2-D-material/metal contacts and provide valuable insights for the design of HAMR media with thermally isolated FePt grains.- 14 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 61 (4) , 1-6
Thermal Conductance Analysis of the [FePt/h-BN/FePt] Interface
Heat-assisted magnetic recording (HAMR) requires a high thermal gradient in the recording media to suppress jitter noises. The FePt-(h-BN) granular film has been proposed as a promising medium due to the formation of columnar grains in the film structure. It is also expected to have a low in-plane (IP) thermal conductivity for enhanced thermal gradient. Accurate measurements of the thermal conductance of nanometer-scale thin films remain challenging, but multilayer structures can provide an important platform for studying the thermal transport in nanocomposite materials. Here, we report on the fabrication and thermal characterization of [h-BN/L$1_{\mathbf {0}}$ -FePt]$\times {N}$ multilayers, where h-BN nanosheets (2.5 nm thick) and L$1_{\mathbf {0}}$ -FePt layers (6.5 nm thick) alternate periodically. Differential$3\omega $ measurements reveal an ultralow effective thermal conductivity of 0.60 ± 0.05 W$\cdot $ m−1 K−1 across the multilayer films and a low thermal boundary conductance (TBC) of 67.9 ± 6.6 MW$\cdot $ m−2 K−1 for the [FePt/h-BN(2.5 nm)/FePt] interface at room temperature. The weak van der Waals bonding at the h-BN/FePt interface is considered the primary contributor to its high thermal resistance. This work can advance the understanding of thermal transport across the 2-D-material/metal contacts and provide valuable insights for the design of HAMR media with thermally isolated FePt grains.- Open Access
- 1 March 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (3) , 035002
FePt–BN granular HAMR media with high grain aspect ratio and high L1 ordering on corning LotusTM NXT glass
Fabricating highly ordered tall L10–FePt with a small grain pitch distance on a commercially available glass substrate is crucial to realize heat-assisted magnetic recording (HAMR) media for industrial manufacture. We have realized tall FePt grains surrounded by crystalized h–BN on Corning NXT™ glass deposited at elevated temperatures in the presence of radio frequency (RF) bias. In this paper, we discuss the effect of deposition temperature on the order parameter of L10–FePt–BN granular media. Well-isolated L10–FePt–BN granular media with a grain diameter of 6.5 nm and height of 11 nm is achieved. These films exhibit a high order parameter of 0.85 with a perpendicular coercivity of 35 kOe.
- 1 March 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (3) , 035002
Open AccessFePt–BN granular HAMR media with high grain aspect ratio and high L1 ordering on corning LotusTM NXT glass
Fabricating highly ordered tall L10–FePt with a small grain pitch distance on a commercially available glass substrate is crucial to realize heat-assisted magnetic recording (HAMR) media for industrial manufacture. We have realized tall FePt grains surrounded by crystalized h–BN on Corning NXT™ glass deposited at elevated temperatures in the presence of radio frequency (RF) bias. In this paper, we discuss the effect of deposition temperature on the order parameter of L10–FePt–BN granular media. Well-isolated L10–FePt–BN granular media with a grain diameter of 6.5 nm and height of 11 nm is achieved. These films exhibit a high order parameter of 0.85 with a perpendicular coercivity of 35 kOe.
- Open Access
- 1 February 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (2) , 025004
Plasmonic near field transducer of nanocomposite with distributed feedback
In this paper, we present a novel near field transducer (NFT) design concept for heat assisted recording. In this design, metal bars separated by thin dielectric are used to form a resonance plasmonic grating with distributed feedback (DFB). The motivation for such structure design is the use of dielectric separation for enhancing the material stability at elevated temperature so that best materials can be used without compromising much needed plasmonic properties. COMSOL Multiphysics software is used to simulate the plasmonic excitation and propagate to provide a detailed performance analysis on novel NFT with a nanocomposite structure to create distributed optical feedback (DFB) for maintaining the plasmonic resonance. The NFT is composed of an array of Au rectangular gratings separated by a constant gap, with each grating component embedded in the dielectric medium. It is shown that the grating based NFT could have the same NFT efficiency compared with a solid piece of Au NFT of the same geometric dimensions.
- 1 February 2023
- Published by AIP Publishing in AIP Advances
- Vol. 13 (2) , 025004
Open AccessPlasmonic near field transducer of nanocomposite with distributed feedback
In this paper, we present a novel near field transducer (NFT) design concept for heat assisted recording. In this design, metal bars separated by thin dielectric are used to form a resonance plasmonic grating with distributed feedback (DFB). The motivation for such structure design is the use of dielectric separation for enhancing the material stability at elevated temperature so that best materials can be used without compromising much needed plasmonic properties. COMSOL Multiphysics software is used to simulate the plasmonic excitation and propagate to provide a detailed performance analysis on novel NFT with a nanocomposite structure to create distributed optical feedback (DFB) for maintaining the plasmonic resonance. The NFT is composed of an array of Au rectangular gratings separated by a constant gap, with each grating component embedded in the dielectric medium. It is shown that the grating based NFT could have the same NFT efficiency compared with a solid piece of Au NFT of the same geometric dimensions.
- 19 April 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 118 (16) , 162403
The utilization of boron nitride (BN) for granular L10-FePt HAMR media fabrication
In this experimental study, we present a dual-layer structure of FePt-boron nitride (BN)/FePt-SiOx granular media for the heat-assisted magnetic recording. The boron nitride (BN) was deposited together with FePt at 700 °C for the first 2.5 nm in the initial film growth. After the initial growth, SiOx was used to replace the BN to serve as the grain boundary material for the rest of film growth process. The transmission electron microscopy study on the fully grown FePt-BN/FePt-SiOx film shows well-isolated FePt grains that are fully encircled by the well-defined grain boundaries. The areal density of FePt grains is distinctively higher than that of the conventional granular FePt-C-based film at similar film thickness. The FePt-BN/FePt-SiOx bilayer granular media also demonstrate excellent magnetic properties, which are comparable to that of FePt-C-SiOx granular media in terms of the hysteresis characteristics.
- 19 April 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 118 (16) , 162403
The utilization of boron nitride (BN) for granular L10-FePt HAMR media fabrication
In this experimental study, we present a dual-layer structure of FePt-boron nitride (BN)/FePt-SiOx granular media for the heat-assisted magnetic recording. The boron nitride (BN) was deposited together with FePt at 700 °C for the first 2.5 nm in the initial film growth. After the initial growth, SiOx was used to replace the BN to serve as the grain boundary material for the rest of film growth process. The transmission electron microscopy study on the fully grown FePt-BN/FePt-SiOx film shows well-isolated FePt grains that are fully encircled by the well-defined grain boundaries. The areal density of FePt grains is distinctively higher than that of the conventional granular FePt-C-based film at similar film thickness. The FePt-BN/FePt-SiOx bilayer granular media also demonstrate excellent magnetic properties, which are comparable to that of FePt-C-SiOx granular media in terms of the hysteresis characteristics.
- Open Access
- 17 November 2019
- Published by MDPI AG in Proceedings
- Vol. 46 (1) , 23
A New Perspective on the Kauzmann Entropy Paradox: A Crystal/Glass Critical Point in Four- and Three-Dimensions
In this article, a new perspective on the Kauzmann point is presented. The “ideal glass transition” that occurs at the Kauzmann temperature is the point at which the configurational entropy of an undercooled metastable liquid equals that of its crystalline counterpart. We model solidifying liquids by using a quaternion orientational order parameter and find that the Kauzmann point is a critical point that exists to separate crystalline and non-crystalline solid states. We identify the Kauzmann point as a first-order critical point, and suggest that it belongs to quaternion ordered systems that exist in four- or three-dimensions. This “Kauzmann critical point” can be considered to be a higher-dimensional analogue to the superfluid-to-Mott insulator quantum phase transition that occurs in two- and one-dimensional complex ordered systems. Such critical points are driven by tuning a non-thermal frustration parameter, and result due to characteristic softening of a `Higgs’ type mode that corresponds to amplitude fluctuations of the order parameter. The first-order nature of the finite temperature Kauzmann critical point is a consequence of the discrete change of the topology of the ground state manifold of the quaternion order parameter field that applies to crystalline and non-crystalline solids.
- 17 November 2019
- Published by MDPI AG in Proceedings
- Vol. 46 (1) , 23
Open AccessA New Perspective on the Kauzmann Entropy Paradox: A Crystal/Glass Critical Point in Four- and Three-Dimensions
In this article, a new perspective on the Kauzmann point is presented. The “ideal glass transition” that occurs at the Kauzmann temperature is the point at which the configurational entropy of an undercooled metastable liquid equals that of its crystalline counterpart. We model solidifying liquids by using a quaternion orientational order parameter and find that the Kauzmann point is a critical point that exists to separate crystalline and non-crystalline solid states. We identify the Kauzmann point as a first-order critical point, and suggest that it belongs to quaternion ordered systems that exist in four- or three-dimensions. This “Kauzmann critical point” can be considered to be a higher-dimensional analogue to the superfluid-to-Mott insulator quantum phase transition that occurs in two- and one-dimensional complex ordered systems. Such critical points are driven by tuning a non-thermal frustration parameter, and result due to characteristic softening of a `Higgs’ type mode that corresponds to amplitude fluctuations of the order parameter. The first-order nature of the finite temperature Kauzmann critical point is a consequence of the discrete change of the topology of the ground state manifold of the quaternion order parameter field that applies to crystalline and non-crystalline solids.
- Open Access
Importance of the 'Higgs' Amplitude Mode in Understanding the "Ideal Glass Transition" and the Kauzmann Entropy Paradox at the Four-Dimensional Crystal/Glass Quantum Critical Point
In this article, a theoretical description of the "ideal glass transition" is approached upon the adoption of a quaternion orientational order parameter. Unlike first-order phase transitions of liquids into crystalline solid states, glass transitions are entirely different phenomena that are non-equilibrium and that are highly dependent on the applied cooling rate. Herein, the "ideal glass transition" that occurs at the finite Kauzmann temperature at which point the configurational entropy of an undercooled liquid matches that of its crystalline counterpart is identified as a first-order quantum critical point. We suggest that this quantum critical point belongs to quaternion ordered systems that exist in four- and three-dimensions. The Kauzmann quantum critical point is considered to be a higher-dimensional analogue to the superfluid-to-Mott insulator quantum phase transition, in two- and one-dimensional complex ordered systems. Such quantum critical points are driven by tuning a non-thermal frustration parameter, and result due to characteristic softening of the 'Higgs' type mode that corresponds to amplitude fluctuations of the order parameter. The first-order nature of the finite temperature Kauzmann quantum critical point is seen as a consequence of the discrete change of the topology of the ground state manifold that applies to crystalline and non-crystalline solid states.
Open AccessImportance of the 'Higgs' Amplitude Mode in Understanding the "Ideal Glass Transition" and the Kauzmann Entropy Paradox at the Four-Dimensional Crystal/Glass Quantum Critical Point
In this article, a theoretical description of the "ideal glass transition" is approached upon the adoption of a quaternion orientational order parameter. Unlike first-order phase transitions of liquids into crystalline solid states, glass transitions are entirely different phenomena that are non-equilibrium and that are highly dependent on the applied cooling rate. Herein, the "ideal glass transition" that occurs at the finite Kauzmann temperature at which point the configurational entropy of an undercooled liquid matches that of its crystalline counterpart is identified as a first-order quantum critical point. We suggest that this quantum critical point belongs to quaternion ordered systems that exist in four- and three-dimensions. The Kauzmann quantum critical point is considered to be a higher-dimensional analogue to the superfluid-to-Mott insulator quantum phase transition, in two- and one-dimensional complex ordered systems. Such quantum critical points are driven by tuning a non-thermal frustration parameter, and result due to characteristic softening of the 'Higgs' type mode that corresponds to amplitude fluctuations of the order parameter. The first-order nature of the finite temperature Kauzmann quantum critical point is seen as a consequence of the discrete change of the topology of the ground state manifold that applies to crystalline and non-crystalline solid states.