Amitava Ghosh
Research Subjects
Amitava Ghosh has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Subham Banerjee
Department of Pharmaceutics National Institute of Pharmaceutical Education and Research (NIPER) Guwahati Assam India
5 shared publications - Anurag Verma
Teerthanker Mahaveer College of Pharmacy, Teerthanker Mahaveer University, Moradabad, Uttar Pradesh, India
3 shared publications Ashoke Kumar Ghosh
3 shared publications- Prithviraj Chakraborty
Department of Pharmaceutics, Royal School of Pharmacy, The Assam Royal Global University, Guwahati, India
3 shared publications Pronobesh Chattopadhyay
2 shared publications- Shiv Sankar Bhattacharya
School of Pharmaceutical Sciences, IFTM University, Moradabad, Uttar Pradesh, India
2 shared publications
Latest Publications
- 3 July 2014
- Published by Taylor & Francis in Drug Delivery
- Vol. 23 (3) , 1016-1027
Comparative study on the predictability of statistical models (RSM and ANN) on the behavior of optimized buccoadhesive wafers containing Loratadine and their in vivo assessment
Buccoadhesive wafer dosage form containing Loratadine is formulated utilizing Formulation by Design (FbD) approach incorporating sodium alginate and lactose monohydrate as independent variable employing solvent casting method. The wafers were statistically optimized using Response Surface Methodology (RSM) and Artificial Neural Network algorithm (ANN) for predicting physicochemical and physico-mechanical properties of the wafers as responses. Morphologically wafers were tested using SEM. Quick disintegration of the samples was examined employing Optical Contact Angle (OCA). The comparison of the predictability of RSM and ANN showed a high prognostic capacity of RSM model over ANN model in forecasting mechanical and physicochemical properties of the wafers. The in vivo assessment of the optimized buccoadhesive wafer exhibits marked increase in bioavailability justifying the administration of Loratadine through buccal route, bypassing hepatic first pass metabolism.
- 3 July 2014
- Published by Taylor & Francis in Drug Delivery
- Vol. 23 (3) , 1016-1027
Comparative study on the predictability of statistical models (RSM and ANN) on the behavior of optimized buccoadhesive wafers containing Loratadine and their in vivo assessment
Buccoadhesive wafer dosage form containing Loratadine is formulated utilizing Formulation by Design (FbD) approach incorporating sodium alginate and lactose monohydrate as independent variable employing solvent casting method. The wafers were statistically optimized using Response Surface Methodology (RSM) and Artificial Neural Network algorithm (ANN) for predicting physicochemical and physico-mechanical properties of the wafers as responses. Morphologically wafers were tested using SEM. Quick disintegration of the samples was examined employing Optical Contact Angle (OCA). The comparison of the predictability of RSM and ANN showed a high prognostic capacity of RSM model over ANN model in forecasting mechanical and physicochemical properties of the wafers. The in vivo assessment of the optimized buccoadhesive wafer exhibits marked increase in bioavailability justifying the administration of Loratadine through buccal route, bypassing hepatic first pass metabolism.
- 1 October 2013
- Published by Elsevier in Carbohydrate Polymers
- Vol. 98 (1) , 64-72
Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres
- 1 October 2013
- Published by Elsevier in Carbohydrate Polymers
- Vol. 98 (1) , 64-72
Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres
- 1 July 2013
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 58, 354-359
A RP-HPLC method for quantification of diclofenac sodium released from biological macromolecules
- 1 July 2013
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 58, 354-359
A RP-HPLC method for quantification of diclofenac sodium released from biological macromolecules
- Open Access
- 28 May 2013
- Published by Wiley in BioMed Research International
- Vol. 2013, 1-12
Design Expert Supported Mathematical Optimization and Predictability Study of Buccoadhesive Pharmaceutical Wafers of Loratadine
Objective. The objective of this work encompasses the application of the response surface approach in the development of buccoadhesive pharmaceutical wafers of Loratadine (LOR).Methods. Experiments were performed according to a 32factorial design to evaluate the effects of buccoadhesive polymer, sodium alginate (), and lactose monohydrate as ingredient, of hydrophilic matrix former () on the bioadhesive force, disintegration time, percent (%) swelling index, and time taken for 70% drug release (). The effect of the two independent variables on the response variables was studied by response surface plots and contour plots generated by the Design-Expert software. The desirability function was used to optimize the response variables.Results. The compatibility between LOR and the wafer excipients was confirmed by differential scanning calorimetry, FTIR spectroscopy, and X-ray diffraction (XRD) analysis. Bioadhesion force, measured with TAXT2i texture analyzer, showed that the wafers had a good bioadhesive property which could be advantageous for retaining the drug into the buccal cavity.Conclusion. The observed responses taken were in agreement with the experimental values, and Loratadine wafers were produced with less experimental trials, and a patient compliant product was achieved with the concept of formulation by design.- 28 May 2013
- Published by Wiley in BioMed Research International
- Vol. 2013, 1-12
Open AccessDesign Expert Supported Mathematical Optimization and Predictability Study of Buccoadhesive Pharmaceutical Wafers of Loratadine
Objective. The objective of this work encompasses the application of the response surface approach in the development of buccoadhesive pharmaceutical wafers of Loratadine (LOR).Methods. Experiments were performed according to a 32factorial design to evaluate the effects of buccoadhesive polymer, sodium alginate (), and lactose monohydrate as ingredient, of hydrophilic matrix former () on the bioadhesive force, disintegration time, percent (%) swelling index, and time taken for 70% drug release (). The effect of the two independent variables on the response variables was studied by response surface plots and contour plots generated by the Design-Expert software. The desirability function was used to optimize the response variables.Results. The compatibility between LOR and the wafer excipients was confirmed by differential scanning calorimetry, FTIR spectroscopy, and X-ray diffraction (XRD) analysis. Bioadhesion force, measured with TAXT2i texture analyzer, showed that the wafers had a good bioadhesive property which could be advantageous for retaining the drug into the buccal cavity.Conclusion. The observed responses taken were in agreement with the experimental values, and Loratadine wafers were produced with less experimental trials, and a patient compliant product was achieved with the concept of formulation by design. - 25 March 2013
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 52 (8) , 795-805
Tailored IPN Hydrogel Bead of Sodium Carboxymethyl Cellulose and Sodium Carboxymethyl Xanthan Gum for Controlled Delivery of Diclofenac Sodium
Interpenetrating network (IPN) beads of sodium carboxymethyl cellulose (SCMC) and sodium carboxymethyl xanthan (SCMX) containing diclofenac sodium (DS), a non steroidal anti-inflammatory drug were prepared by single water-in-water (w/w) emulsion gelation process using AlCl3 as the cross-linking agent. The influence of different formulation variables like polymer ratio, gelation time, concentration of cross-linking agenton in-vitro physico-chemical parameters and drug release studies were performed. The tailored IPN bead were analytically evaluated by Scanning electron microscopy (SEM), Fourier Transform Infra-red (FTIR), X-ray diffraction (XRD), Differential Scanning Calorimetry (DSC) analysis. IPN beads showed improved drug encapsulation efficiency along with enhanced intestinal drug release.
- 25 March 2013
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 52 (8) , 795-805
Tailored IPN Hydrogel Bead of Sodium Carboxymethyl Cellulose and Sodium Carboxymethyl Xanthan Gum for Controlled Delivery of Diclofenac Sodium
Interpenetrating network (IPN) beads of sodium carboxymethyl cellulose (SCMC) and sodium carboxymethyl xanthan (SCMX) containing diclofenac sodium (DS), a non steroidal anti-inflammatory drug were prepared by single water-in-water (w/w) emulsion gelation process using AlCl3 as the cross-linking agent. The influence of different formulation variables like polymer ratio, gelation time, concentration of cross-linking agenton in-vitro physico-chemical parameters and drug release studies were performed. The tailored IPN bead were analytically evaluated by Scanning electron microscopy (SEM), Fourier Transform Infra-red (FTIR), X-ray diffraction (XRD), Differential Scanning Calorimetry (DSC) analysis. IPN beads showed improved drug encapsulation efficiency along with enhanced intestinal drug release.
- 1 December 2012
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 51 (5) , 1173-1184
Al3+ ion cross-linked interpenetrating polymeric network microbeads from tailored natural polysaccharides
- 1 December 2012
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 51 (5) , 1173-1184
Al3+ ion cross-linked interpenetrating polymeric network microbeads from tailored natural polysaccharides
- 27 June 2012
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 51 (9) , 878-884
Synthesis and Characterization of Poly(acrylic acid)/Poly(vinyl alcohol)-xanthan Gum Interpenetrating Network (IPN) Superabsorbent Polymeric Composites
Initially interpenetrating network (IPN) hydrogel was prepared by dispersing xanthan gum (XG) into poly(vinyl alcohol) (PVA) backbone in an aqueous medium. Polyacrylic acid (PAA)/Poly (vinyl alcohol)-Xanthan gum IPN superabsorbent composite were fabricated well by dispersing the prepared IPN hydrogel in acrylic acid and polymerized in a complete aqueous environment through chemical cross-linking method. These superabsorbent polymeric composites were analytically evaluated by scanning electron microscopy (SEM), Fourier Transform Infrared Spectra (FTIR), Thermal analysis (DSC) and X-ray diffraction (XRD) analysis. Simultaneously water absorbency, swelling kinetics and water retention abilities of this prepared superabsorbent polymeric composites were also investigated systematically.
- 27 June 2012
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 51 (9) , 878-884
Synthesis and Characterization of Poly(acrylic acid)/Poly(vinyl alcohol)-xanthan Gum Interpenetrating Network (IPN) Superabsorbent Polymeric Composites
Initially interpenetrating network (IPN) hydrogel was prepared by dispersing xanthan gum (XG) into poly(vinyl alcohol) (PVA) backbone in an aqueous medium. Polyacrylic acid (PAA)/Poly (vinyl alcohol)-Xanthan gum IPN superabsorbent composite were fabricated well by dispersing the prepared IPN hydrogel in acrylic acid and polymerized in a complete aqueous environment through chemical cross-linking method. These superabsorbent polymeric composites were analytically evaluated by scanning electron microscopy (SEM), Fourier Transform Infrared Spectra (FTIR), Thermal analysis (DSC) and X-ray diffraction (XRD) analysis. Simultaneously water absorbency, swelling kinetics and water retention abilities of this prepared superabsorbent polymeric composites were also investigated systematically.
- Open Access
- 1 June 2012
- Published by Walter de Gruyter GmbH in Acta Pharmaceutica
- Vol. 62 (2) , 237-250
Low molecular mass chitosan as carrier for a hydrodynamically balanced system for sustained delivery of ciprofloxacin hydrochloride
Low molecular mass chitosan as carrier for a hydrodynamically balanced system for sustained delivery of ciprofloxacin hydrochloride: Chitosan has become a focus of major interest in recent years due to its excellent biocompatibility, biodegradability and non-toxicity. Although this material has already been extensively investigated in the design of different types of drug delivery systems, it is still little explored for stomach specific drug delivery systems. The objective of the present investigation was to explore the potential of low molecular mass chitosan (LMCH) as carrier for a hydrodynamically balanced system (HBS) for sustained delivery of water soluble drug ciprofloxacin hydrochloride (CP). Various formulations were prepared by physical blending of drug and polymer(s) in varying ratios followed by encapsulation into hard gelatin capsules. All the formulations remained buoyant in 0.1 mol L-1 HCl (pH 1.2) throughout the experiment. Effect of addition of xanthan gum (XG) or ethyl cellulose (EC) on drug release was also investigated. Zero order drug release was obtained from the formulations containing LMCH alone or in combination with XG, and in one instance also with EC. Our results suggest that LMCH alone or in combination with XG is an excellent material for stomach specific sustained delivery of CP from hydrodynamically balanced single unit capsules.
- 1 June 2012
- Published by Walter de Gruyter GmbH in Acta Pharmaceutica
- Vol. 62 (2) , 237-250
Open AccessLow molecular mass chitosan as carrier for a hydrodynamically balanced system for sustained delivery of ciprofloxacin hydrochloride
Low molecular mass chitosan as carrier for a hydrodynamically balanced system for sustained delivery of ciprofloxacin hydrochloride: Chitosan has become a focus of major interest in recent years due to its excellent biocompatibility, biodegradability and non-toxicity. Although this material has already been extensively investigated in the design of different types of drug delivery systems, it is still little explored for stomach specific drug delivery systems. The objective of the present investigation was to explore the potential of low molecular mass chitosan (LMCH) as carrier for a hydrodynamically balanced system (HBS) for sustained delivery of water soluble drug ciprofloxacin hydrochloride (CP). Various formulations were prepared by physical blending of drug and polymer(s) in varying ratios followed by encapsulation into hard gelatin capsules. All the formulations remained buoyant in 0.1 mol L-1 HCl (pH 1.2) throughout the experiment. Effect of addition of xanthan gum (XG) or ethyl cellulose (EC) on drug release was also investigated. Zero order drug release was obtained from the formulations containing LMCH alone or in combination with XG, and in one instance also with EC. Our results suggest that LMCH alone or in combination with XG is an excellent material for stomach specific sustained delivery of CP from hydrodynamically balanced single unit capsules.
- Open Access
- 1 July 2011
- Published by Manuscript Technomedia LLP in Journal of Young Pharmacists
- Vol. 3 (3) , 205-210
Preparation and Evaluation of Silymarin β-cyclodextrin Molecular Inclusion Complexes
Silymarin is a hepatoprotective agent, having poor water solubility and oral absorption of about 23 - 47%, leading to low bioavailability of the drug. The aim of the present study is to improve the solubility and dissolution rate and in turn the hepatoprotective activity of the drug, by formulating its inclusion complex with beta (β)-cyclodextrin, using different methods. The phase solubility analysis indicates the formation of 1:1 molar inclusion complex of the drug with beta cyclodextrin. Apparent stability constant for Silymarin (K c ) was 722 K−1 with β-cyclodextrin complex. The inclusion complexes were prepared by four different methods, namely, physical mixing, kneading, co-precipitation, and solvent evaporation. The prepared complexes were characterized using differential scanning colorimetry, scanning electron microscopy, and x-ray diffractometry. The inclusion complex prepared by the co-precipitation methods exhibits an overall best result, with respect to the formulation of sustained release formulations. Keywords: Bioavailability, inclusion complexes, silymarin, β-cyclodextrin
- 1 July 2011
- Published by Manuscript Technomedia LLP in Journal of Young Pharmacists
- Vol. 3 (3) , 205-210
Open AccessPreparation and Evaluation of Silymarin β-cyclodextrin Molecular Inclusion Complexes
Silymarin is a hepatoprotective agent, having poor water solubility and oral absorption of about 23 - 47%, leading to low bioavailability of the drug. The aim of the present study is to improve the solubility and dissolution rate and in turn the hepatoprotective activity of the drug, by formulating its inclusion complex with beta (β)-cyclodextrin, using different methods. The phase solubility analysis indicates the formation of 1:1 molar inclusion complex of the drug with beta cyclodextrin. Apparent stability constant for Silymarin (K c ) was 722 K−1 with β-cyclodextrin complex. The inclusion complexes were prepared by four different methods, namely, physical mixing, kneading, co-precipitation, and solvent evaporation. The prepared complexes were characterized using differential scanning colorimetry, scanning electron microscopy, and x-ray diffractometry. The inclusion complex prepared by the co-precipitation methods exhibits an overall best result, with respect to the formulation of sustained release formulations. Keywords: Bioavailability, inclusion complexes, silymarin, β-cyclodextrin
- Open Access
- 1 July 2009
- Published by Springer Nature in Saudi Pharmaceutical Journal
- Vol. 17 (3) , 233-241
Effects of plasticizers and surfactants on the film forming properties of hydroxypropyl methylcellulose for the coating of diclofenac sodium tablets
Hydroxy propyl methyl cellulose (HPMC) 5cPs, an aqueous soluble polymer was employed for coating diclofenac sodium (DFS) tablets 25 mg for protecting the integrity of the drug yet rendering the drug to release at a faster rate on contact with the gastric environment. Proper optimization for the aqueous based film coating formulation was undertaken primarily employing plasticizers like polyethylene glycol (PEG) 400 and propylene glycol (PG). The defect free selected formulations were further subjected for studying the effects of surfactants like sodium lauryl sulphate (SLS) and Tween-80 along with the plasticizers. The quality of the aqueous film coats or the plasticizer efficiency in case of PEG-400 is in the order 1.5 > 0.5 > 1.0% and for PG 1 > 4 > 3% which can be stated on the basis of less incidence of major coat defects like chipping, cracking, orange peel, roughness, blistering, blooming, picking. The quality of aqueous film coat or the surfactant efficiency in case of SLS + PEG-400 is in the order 0.3 < 0.5 < 0.1% and SLS + PG is in the order 0.5 < 0.1 < 0.3%. In case of Tween-80 + PEG-400 the order is 0.3 < 0.5 < 0.1% and Tween-80 + PG is in the order 0.3 < 0.1 < 0.5%. Elegant film formation can be stated from fewer incidences of coat defects. The obtained coated tablets eventually satisfied all the normal physical parameters like thickness, weights, and weight gain, drug content, crushing strength, percent friability, disintegration time, dissolution profile and possible drug-polymer interactions. ANOVA was undertaken followed by Dunnet multiple comparison for the dissolution profile considering uncoated as the standard. The difference was considered significant at p ⩽ 0.01.
- 1 July 2009
- Published by Springer Nature in Saudi Pharmaceutical Journal
- Vol. 17 (3) , 233-241
Open AccessEffects of plasticizers and surfactants on the film forming properties of hydroxypropyl methylcellulose for the coating of diclofenac sodium tablets
Hydroxy propyl methyl cellulose (HPMC) 5cPs, an aqueous soluble polymer was employed for coating diclofenac sodium (DFS) tablets 25 mg for protecting the integrity of the drug yet rendering the drug to release at a faster rate on contact with the gastric environment. Proper optimization for the aqueous based film coating formulation was undertaken primarily employing plasticizers like polyethylene glycol (PEG) 400 and propylene glycol (PG). The defect free selected formulations were further subjected for studying the effects of surfactants like sodium lauryl sulphate (SLS) and Tween-80 along with the plasticizers. The quality of the aqueous film coats or the plasticizer efficiency in case of PEG-400 is in the order 1.5 > 0.5 > 1.0% and for PG 1 > 4 > 3% which can be stated on the basis of less incidence of major coat defects like chipping, cracking, orange peel, roughness, blistering, blooming, picking. The quality of aqueous film coat or the surfactant efficiency in case of SLS + PEG-400 is in the order 0.3 < 0.5 < 0.1% and SLS + PG is in the order 0.5 < 0.1 < 0.3%. In case of Tween-80 + PEG-400 the order is 0.3 < 0.5 < 0.1% and Tween-80 + PG is in the order 0.3 < 0.1 < 0.5%. Elegant film formation can be stated from fewer incidences of coat defects. The obtained coated tablets eventually satisfied all the normal physical parameters like thickness, weights, and weight gain, drug content, crushing strength, percent friability, disintegration time, dissolution profile and possible drug-polymer interactions. ANOVA was undertaken followed by Dunnet multiple comparison for the dissolution profile considering uncoated as the standard. The difference was considered significant at p ⩽ 0.01.