Ali Shiri
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ali Shiri has a total of 165 co-authors. Here are the top co-authors by number of shared publications:
- Hossein Eshghi
Department of Chemistry, Faculty of Science, Ferdowsi University of Mashhad, Mashhad, Iran
39 shared publications Mehdi Bakavoli
Department of Chemistry, Faculty of Science, Ferdowsi University of Mashhad, Mashhad, Iran
27 shared publications- Mehdi Bakavoli
Department of Chemistry, Faculty of Science Ferdowsi University of Mashhad Mashhad 91775‐1436 Iran
18 shared publications Mohammad Rahimizadeh
18 shared publicationsSeddigheh Sheikhi-Mohammareh
Department of Chemistry, Faculty of Science, Ferdowsi University of Mashhad, Mashhad, Iran
12 shared publications- Kayvan Saadat
Department of Chemistry, Faculty of Science, Ferdowsi University of Mashhad, Mashhad, Iran
8 shared publications
Latest Publications
- 20 May 2026
- Published by Wiley in Journal of Heterocyclic Chemistry
- Vol. 63 (8) , 1268-1277
Regioselective Base‐Induced Intramolecular Synthesis of Novel Pyrimido[1,6‐ a ]Selenopheno[3,2‐ d ]Pyrimidines
In this study, we present an efficient and regioselective synthetic approach for the preparation of novel pyrimido[1,6‐ a ]selenopheno[3,2‐ d ]pyrimidine derivatives. The sequence involves the initial condensation of 3‐amino‐2,4‐dicyano‐5‐(pyrrolidin‐1‐yl)selenophene (1) with 5‐bromo‐2,4‐dichloro‐6‐methylpyrimidine (2) , followed by nucleophilic substitution with selected secondary amines. Subsequently, a base‐induced intramolecular cyclization occurring on the nitrile group using NaNH 2 afforded the fused products (6a–f) . Although only a limited number of derivatives were obtained, this sequence offers a straightforward and modular route to fused heterocyclic systems. The structural features, including the disappearance of one nitrile group and the formation of the fused ring system, were characterized by FT‐IR, 1 H NMR, 13 C NMR, HMBC, and 2D NOESY analyses. The obtained data were consistent with the proposed structures and supported the formation of the fused pyrimidine–selenophene framework. This catalyst‐free and operationally simple procedure highlights a practical synthetic pathway to selenium‐containing fused pyrimidines, which have been previously difficult to access. Furthermore, preliminary antibacterial evaluation indicates promising biological potential for the obtained compounds.
- 20 May 2026
- Published by Wiley in Journal of Heterocyclic Chemistry
- Vol. 63 (8) , 1268-1277
Regioselective Base‐Induced Intramolecular Synthesis of Novel Pyrimido[1,6‐ a ]Selenopheno[3,2‐ d ]Pyrimidines
In this study, we present an efficient and regioselective synthetic approach for the preparation of novel pyrimido[1,6‐ a ]selenopheno[3,2‐ d ]pyrimidine derivatives. The sequence involves the initial condensation of 3‐amino‐2,4‐dicyano‐5‐(pyrrolidin‐1‐yl)selenophene (1) with 5‐bromo‐2,4‐dichloro‐6‐methylpyrimidine (2) , followed by nucleophilic substitution with selected secondary amines. Subsequently, a base‐induced intramolecular cyclization occurring on the nitrile group using NaNH 2 afforded the fused products (6a–f) . Although only a limited number of derivatives were obtained, this sequence offers a straightforward and modular route to fused heterocyclic systems. The structural features, including the disappearance of one nitrile group and the formation of the fused ring system, were characterized by FT‐IR, 1 H NMR, 13 C NMR, HMBC, and 2D NOESY analyses. The obtained data were consistent with the proposed structures and supported the formation of the fused pyrimidine–selenophene framework. This catalyst‐free and operationally simple procedure highlights a practical synthetic pathway to selenium‐containing fused pyrimidines, which have been previously difficult to access. Furthermore, preliminary antibacterial evaluation indicates promising biological potential for the obtained compounds.
- Open Access
- 24 April 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (24) , 22261-22268
Metal-free Minisci C–H alkylation of hydrazones using aldehydes: an unexpected route to hydrazone-containing pyrimidine derivatives
In this research, a novel method for synthesizing various heterocyclic derivatives via the Minisci radical substitution reaction has been presented. The Minisci reaction offers a very efficient and valuable approach for directly functionalizing heteroarenes with an electron-deficient group, allowing the formation of carbon–carbon bonds straightforwardly and efficiently. We have developed a metal-free, light-independent Minisci-type strategy for the direct C–H functionalization of pyrimidines, thereby facilitating the design of heteroaromatic derivatives containing hydrazone groups. The target derivatives were successfully synthesized in good yields using aromatic aldehydes as alkyl radical precursors. The reaction proceeds through a sequence of hydrogen atom abstraction (HAA) from the aldehyde, followed by decarbonylation under oxidative conditions using K2S2O8 and trifluoroacetic acid (TFA). This method provides a practical and scalable approach to accessing structurally heterocyclic compounds of various classes.
- 24 April 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (24) , 22261-22268
Open AccessMetal-free Minisci C–H alkylation of hydrazones using aldehydes: an unexpected route to hydrazone-containing pyrimidine derivatives
In this research, a novel method for synthesizing various heterocyclic derivatives via the Minisci radical substitution reaction has been presented. The Minisci reaction offers a very efficient and valuable approach for directly functionalizing heteroarenes with an electron-deficient group, allowing the formation of carbon–carbon bonds straightforwardly and efficiently. We have developed a metal-free, light-independent Minisci-type strategy for the direct C–H functionalization of pyrimidines, thereby facilitating the design of heteroaromatic derivatives containing hydrazone groups. The target derivatives were successfully synthesized in good yields using aromatic aldehydes as alkyl radical precursors. The reaction proceeds through a sequence of hydrogen atom abstraction (HAA) from the aldehyde, followed by decarbonylation under oxidative conditions using K2S2O8 and trifluoroacetic acid (TFA). This method provides a practical and scalable approach to accessing structurally heterocyclic compounds of various classes.
- 28 January 2026
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 23 (3) , 1434-1462
Structural Design and Modification of Porphyrin-Based Nanovesicles for Enhanced Biomedical Functionality
Porphyrin-based nanovesicles have emerged as promising platforms for pharmaceutical applications due to their inherent biocompatibility and unique photosensitive properties. Their vesicular architecture facilitates both photodynamic and photothermal therapies while enabling targeted drug delivery through photoactivation. Incorporation of porphyrins into nanovesicle bilayers enhances therapeutic efficacy, stability, and cellular uptake. Moreover, porphyrins' ability to chelate metal ions extends their use to diagnostic imaging and theranostics. Specifically, cobalt-chelated porphyrin vesicles have demonstrated potential for the targeted delivery of macromolecules, including peptides and vaccines. This review highlights recent advances in the design, modification, and biomedical application of porphyrin-based nanovesicles, with a focus on their chemical versatility and multifunctionality.
- 28 January 2026
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 23 (3) , 1434-1462
Structural Design and Modification of Porphyrin-Based Nanovesicles for Enhanced Biomedical Functionality
Porphyrin-based nanovesicles have emerged as promising platforms for pharmaceutical applications due to their inherent biocompatibility and unique photosensitive properties. Their vesicular architecture facilitates both photodynamic and photothermal therapies while enabling targeted drug delivery through photoactivation. Incorporation of porphyrins into nanovesicle bilayers enhances therapeutic efficacy, stability, and cellular uptake. Moreover, porphyrins' ability to chelate metal ions extends their use to diagnostic imaging and theranostics. Specifically, cobalt-chelated porphyrin vesicles have demonstrated potential for the targeted delivery of macromolecules, including peptides and vaccines. This review highlights recent advances in the design, modification, and biomedical application of porphyrin-based nanovesicles, with a focus on their chemical versatility and multifunctionality.
- Open Access
- 28 October 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (49) , 42121-42175
Comprehensive perspectives of metal and metal-free C–H activation approaches in pyrimidines and related heteroarenes: scope, mechanistic insights, and synthetic utility
Pyrimidine C–H activation can be efficiently achieved through three complementary strategies: metal-catalyzed, metal-free, and photochemical approaches enabling direct functionalization and structural diversification of heteroaromatic frameworks.
- 28 October 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (49) , 42121-42175
Open AccessComprehensive perspectives of metal and metal-free C–H activation approaches in pyrimidines and related heteroarenes: scope, mechanistic insights, and synthetic utility
Pyrimidine C–H activation can be efficiently achieved through three complementary strategies: metal-catalyzed, metal-free, and photochemical approaches enabling direct functionalization and structural diversification of heteroaromatic frameworks.
- 12 August 2025
- Published by Wiley in Journal of Heterocyclic Chemistry
- Vol. 62 (10) , 1111-1118
Synthesis of New [1,3]Selenazolo[5,4‐d]Pyrimidine Derivatives as Purine‐Like Selenium‐Containing Heterocycles
In the research, we presented a method for synthesizing selenium‐containing heterocyclic compounds. One of the key structures in this project is the derivative of 7‐methyl‐2‐(alkylthio)‐5‐(amino‐1‐yl)‐[1,3]selenazolo[5,4‐d]pyrimidine (3a‐i). These are synthesized in one step using the treatment of precursor 2,4‐dichloro‐6‐methylpyrimidin‐5‐amine (1) with selenium and sodium borohydride in ethanol to obtain the compound, which subsequently reacts with carbon disulfide in pyridine to form 5‐chloro‐7‐methyl‐[1,3]selenazolo[5,4‐d]pyrimidine‐2(1H)‐thione (2). This is then treated with various alkyl halides under reflux conditions in ethanol to yield various derivatives (3a‐i). A mixture of 5‐chloro‐7‐methyl‐2‐(alkylthio)‐[1,3]selenazolo[5,4‐d]pyrimidine (3a‐i) and various primary and secondary amines is refluxed in ethanol to prepare the corresponding nucleophilic substituted products, 2‐(alkylsulfanyl)‐7‐methyl‐5‐(morpholin‐4‐yl)‐[1,3]selenazolo[5,4‐d]pyrimidines (4a‐i) in good yields.
- 12 August 2025
- Published by Wiley in Journal of Heterocyclic Chemistry
- Vol. 62 (10) , 1111-1118
Synthesis of New [1,3]Selenazolo[5,4‐d]Pyrimidine Derivatives as Purine‐Like Selenium‐Containing Heterocycles
In the research, we presented a method for synthesizing selenium‐containing heterocyclic compounds. One of the key structures in this project is the derivative of 7‐methyl‐2‐(alkylthio)‐5‐(amino‐1‐yl)‐[1,3]selenazolo[5,4‐d]pyrimidine (3a‐i). These are synthesized in one step using the treatment of precursor 2,4‐dichloro‐6‐methylpyrimidin‐5‐amine (1) with selenium and sodium borohydride in ethanol to obtain the compound, which subsequently reacts with carbon disulfide in pyridine to form 5‐chloro‐7‐methyl‐[1,3]selenazolo[5,4‐d]pyrimidine‐2(1H)‐thione (2). This is then treated with various alkyl halides under reflux conditions in ethanol to yield various derivatives (3a‐i). A mixture of 5‐chloro‐7‐methyl‐2‐(alkylthio)‐[1,3]selenazolo[5,4‐d]pyrimidine (3a‐i) and various primary and secondary amines is refluxed in ethanol to prepare the corresponding nucleophilic substituted products, 2‐(alkylsulfanyl)‐7‐methyl‐5‐(morpholin‐4‐yl)‐[1,3]selenazolo[5,4‐d]pyrimidines (4a‐i) in good yields.
- 9 April 2025
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 39 (5)
Highly Efficient CO₂ Fixation Into Cyclic Carbonates Catalyzed by Imidazolium‐Functionalized Zn‐Based MOFs
The coupling between epoxide and carbon dioxide into cyclic carbonates in the absence of co‐catalyst and solvents is a feasible strategy for removing CO2 from the atmosphere and achieving a carbon‐neutral cycle. In this context, two new bifunctional catalytic systems prepared by modification metal–organic frameworks (MOFs) with ionic liquids (ILs) and catalytic activities have been compared in converting CO2 into cyclic carbonates. IL methylimidazolium bromide (MI‐Br) is grafted into both Zn‐MOF‐NH2 and Zn3(L)3(H2L) MOF to produce the dual‐functional one‐component systems with a high density of Lewis acidic Zn(II) metal sites and IL functional sites to carry out co‐catalyst/solvent‐free cycloaddition of CO2 to epoxides. The characteristics of the MI‐Br IL@MOFs were revealed via different techniques, including FE‐SEM, EDX, FT‐IR, XRD, N2 adsorption, NH3‐TPD, and ICP‐OES. Further, two efficient catalysts act as excellent recyclable catalysts for 4 successive cycles without substantial loss in catalytic activity cycloaddition of CO2 to epoxides to cyclic carbonates. Herein, a synergistic catalytic mechanism between Lewis acidic sites and Br− ions is proposed to carry out the cycloaddition of CO2 to epoxides under co‐catalyst/solvent‐free conditions.
- 9 April 2025
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 39 (5)
Highly Efficient CO₂ Fixation Into Cyclic Carbonates Catalyzed by Imidazolium‐Functionalized Zn‐Based MOFs
The coupling between epoxide and carbon dioxide into cyclic carbonates in the absence of co‐catalyst and solvents is a feasible strategy for removing CO2 from the atmosphere and achieving a carbon‐neutral cycle. In this context, two new bifunctional catalytic systems prepared by modification metal–organic frameworks (MOFs) with ionic liquids (ILs) and catalytic activities have been compared in converting CO2 into cyclic carbonates. IL methylimidazolium bromide (MI‐Br) is grafted into both Zn‐MOF‐NH2 and Zn3(L)3(H2L) MOF to produce the dual‐functional one‐component systems with a high density of Lewis acidic Zn(II) metal sites and IL functional sites to carry out co‐catalyst/solvent‐free cycloaddition of CO2 to epoxides. The characteristics of the MI‐Br IL@MOFs were revealed via different techniques, including FE‐SEM, EDX, FT‐IR, XRD, N2 adsorption, NH3‐TPD, and ICP‐OES. Further, two efficient catalysts act as excellent recyclable catalysts for 4 successive cycles without substantial loss in catalytic activity cycloaddition of CO2 to epoxides to cyclic carbonates. Herein, a synergistic catalytic mechanism between Lewis acidic sites and Br− ions is proposed to carry out the cycloaddition of CO2 to epoxides under co‐catalyst/solvent‐free conditions.
- Open Access
- 6 March 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (10) , 7236-7247
Nitrogen-rich metal–organic framework of nickel(ii) as a highly efficient and reusable catalyst for the synthesis of cyclic carbonates at ambient pressure of CO2
Nitrogen-rich metal organic frameworks (MOFs) structures have a great potential for the chemical fixation of CO2.
- 6 March 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (10) , 7236-7247
Open AccessNitrogen-rich metal–organic framework of nickel(ii) as a highly efficient and reusable catalyst for the synthesis of cyclic carbonates at ambient pressure of CO2
Nitrogen-rich metal organic frameworks (MOFs) structures have a great potential for the chemical fixation of CO2.
- 18 December 2024
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 39 (1)
Copper Acetylacetonate–Immobilized Halloysite Nanotube: An Efficient Natural and Green Catalyst for the Synthesis of 4H‐Chromenes at Room Temperature
A new copper acetylacetonate immobilized on halloysite nanotube (HNT) was synthesized. For this purpose, (3‐aminopropyl)trimethoxysilane (AMPTSi) was covalently bonded to the surface of halloysite nanotubes, and then copper acetylacetonate was immobilized onto the modified support. The chemical and physical structure of Cu(acac)2/AMPTSi/HNTs were characterized via various analyses such as TEM, SEM, EDS, FTIR, XRD, TGA, and N2 adsorption–desorption. The efficiency of this catalyst was studied in a one‐pot three‐component reaction of benzaldehydes, dimedone, and malononitrile/ethyl cyanoacetate for the synthesis of 4H‐chromenes. For all substrates, good to excellent yields of the corresponding 4H‐chromenes were obtained.
- 18 December 2024
- Published by Wiley in Applied Organometallic Chemistry
- Vol. 39 (1)
Copper Acetylacetonate–Immobilized Halloysite Nanotube: An Efficient Natural and Green Catalyst for the Synthesis of 4H‐Chromenes at Room Temperature
A new copper acetylacetonate immobilized on halloysite nanotube (HNT) was synthesized. For this purpose, (3‐aminopropyl)trimethoxysilane (AMPTSi) was covalently bonded to the surface of halloysite nanotubes, and then copper acetylacetonate was immobilized onto the modified support. The chemical and physical structure of Cu(acac)2/AMPTSi/HNTs were characterized via various analyses such as TEM, SEM, EDS, FTIR, XRD, TGA, and N2 adsorption–desorption. The efficiency of this catalyst was studied in a one‐pot three‐component reaction of benzaldehydes, dimedone, and malononitrile/ethyl cyanoacetate for the synthesis of 4H‐chromenes. For all substrates, good to excellent yields of the corresponding 4H‐chromenes were obtained.
- Open Access
- 20 October 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-15
Post-synthetic modification of Zr-based metal organic framework by schiff base zinc complex for catalytic applications in a click reaction
A novel nanocatalyst, denoted as UiO-66/Sal-ZnCl2, has been synthesized and systematically characterized employing a range of analytical techniques, including Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), Brunauer–Emmett–Teller (BET) surface area analysis, and inductively coupled plasma (ICP) analysis. The comprehensive analyses collectively affirm the effective coordination of zinc chloride onto the functionalized UiO-66. Subsequently, the catalytic efficacy of UiO-66/Sal-ZnCl2 was assessed in a one-pot, three-component click reaction involving terminal alkynes, alkyl halides, and sodium azide, conducted in an aqueous medium. The catalyst demonstrated remarkable catalytic activity, showcasing the capability to facilitate the reaction with high yields and exceptional regioselectivity. Noteworthy attributes of this nanocatalyst and the method include its elevated efficiency, recyclability, convenient product workup, and, significantly, the utilization of a sustainable solvent medium. The synthesis, characterization, and catalytic performance of this catalyst collectively contribute to its potential as an innovative and reusable nanocatalyst for diverse synthetic transformations.
- 20 October 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-15
Open AccessPost-synthetic modification of Zr-based metal organic framework by schiff base zinc complex for catalytic applications in a click reaction
A novel nanocatalyst, denoted as UiO-66/Sal-ZnCl2, has been synthesized and systematically characterized employing a range of analytical techniques, including Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), Brunauer–Emmett–Teller (BET) surface area analysis, and inductively coupled plasma (ICP) analysis. The comprehensive analyses collectively affirm the effective coordination of zinc chloride onto the functionalized UiO-66. Subsequently, the catalytic efficacy of UiO-66/Sal-ZnCl2 was assessed in a one-pot, three-component click reaction involving terminal alkynes, alkyl halides, and sodium azide, conducted in an aqueous medium. The catalyst demonstrated remarkable catalytic activity, showcasing the capability to facilitate the reaction with high yields and exceptional regioselectivity. Noteworthy attributes of this nanocatalyst and the method include its elevated efficiency, recyclability, convenient product workup, and, significantly, the utilization of a sustainable solvent medium. The synthesis, characterization, and catalytic performance of this catalyst collectively contribute to its potential as an innovative and reusable nanocatalyst for diverse synthetic transformations.
- Open Access
- 12 September 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (40) , 29122-29133
Design and synthesis of novel main protease inhibitors of COVID-19: quinoxalino[2,1- b ]quinazolin-12-ones
Aiming to discover potent inhibitors targeting 3CL pro , an efficient procedure has been established for the synthesis of novel quinoxalino[2,1- b ]quinazolin-12-ones.
- 12 September 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (40) , 29122-29133
Open AccessDesign and synthesis of novel main protease inhibitors of COVID-19: quinoxalino[2,1- b ]quinazolin-12-ones
Aiming to discover potent inhibitors targeting 3CL pro , an efficient procedure has been established for the synthesis of novel quinoxalino[2,1- b ]quinazolin-12-ones.