Ying Yuan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Ying Yuan has a total of 91 co-authors. Here are the top co-authors by number of shared publications:
Enzhu Li
University of Electronic Science and Technology of China
29 shared publicationsBin Tang
26 shared publicationsShuren Zhang
21 shared publicationsHao Wang
University of Electronic Science and Technology of China
9 shared publicationsKang Luo
University of Electronic Science and Technology of China
8 shared publicationsZhengyi Yang
National Engineering Center of Electromagnetic Radiation Control Materials, University of Electronic Science and Technology of China, Chengdu, People’s Republic of China
8 shared publications
Latest Publications
- 31 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (35) , 48273-48285
Sucrose-Assisted Interface Engineering of Boron Nitride for BT-Based High-Frequency Electronic Packaging Substrates with Low Dielectric Loss and Enhanced Thermal Conductivity
The rapid evolution of high-frequency communication, heterogeneous integration, and high-power-density packaging technologies has imposed increasingly stringent requirements for low-loss signal transmission and efficient heat dissipation on polymer-based packaging substrates. Herein, a BN interfacial engineering strategy combining sucrose-assisted mechanochemical activation with silane coupling was developed, and the resulting functionalized BN (f-BN) and SiO2 were incorporated as hybrid fillers into glass fiber fabric-reinforced bismaleimide-triazine (BT) resin composites. The results reveal that sucrose-assisted ball milling generated a hydroxyl-rich active layer on the BN surface, enabling the subsequent grafting of phenylamino silane and thereby improving the dispersion and interfacial bonding of f-BN within the composites. With the partial replacement of SiO2 by thermally conductive f-BN, the f-BN45 composite achieved an extremely low dielectric loss (Df) of 0.003 at 10 GHz and a through-plane thermal conductivity of 1.53 W m–1 K–1, which was 86.9% higher than that of the composite filled only with SiO2. In addition to its low Df and enhanced heat-conduction capability, f-BN45 also exhibited improved dimensional stability of the composites, as reflected by an X-axis CTE of 7.2 ppm/°C, while maintaining stable dielectric performance over a wide temperature range. Practical power device heat-dissipation evaluation and finite element simulations further confirmed the advantage of f-BN45 in chip thermal management. This work highlights sucrose-assisted surface activation combined with silane coupling as an effective route to tailoring the BN/resin interface, offering a feasible paradigm for high-performance BT-based composites in high-frequency electronic packaging and thermal management applications.
- 31 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (35) , 48273-48285
Sucrose-Assisted Interface Engineering of Boron Nitride for BT-Based High-Frequency Electronic Packaging Substrates with Low Dielectric Loss and Enhanced Thermal Conductivity
The rapid evolution of high-frequency communication, heterogeneous integration, and high-power-density packaging technologies has imposed increasingly stringent requirements for low-loss signal transmission and efficient heat dissipation on polymer-based packaging substrates. Herein, a BN interfacial engineering strategy combining sucrose-assisted mechanochemical activation with silane coupling was developed, and the resulting functionalized BN (f-BN) and SiO2 were incorporated as hybrid fillers into glass fiber fabric-reinforced bismaleimide-triazine (BT) resin composites. The results reveal that sucrose-assisted ball milling generated a hydroxyl-rich active layer on the BN surface, enabling the subsequent grafting of phenylamino silane and thereby improving the dispersion and interfacial bonding of f-BN within the composites. With the partial replacement of SiO2 by thermally conductive f-BN, the f-BN45 composite achieved an extremely low dielectric loss (Df) of 0.003 at 10 GHz and a through-plane thermal conductivity of 1.53 W m–1 K–1, which was 86.9% higher than that of the composite filled only with SiO2. In addition to its low Df and enhanced heat-conduction capability, f-BN45 also exhibited improved dimensional stability of the composites, as reflected by an X-axis CTE of 7.2 ppm/°C, while maintaining stable dielectric performance over a wide temperature range. Practical power device heat-dissipation evaluation and finite element simulations further confirmed the advantage of f-BN45 in chip thermal management. This work highlights sucrose-assisted surface activation combined with silane coupling as an effective route to tailoring the BN/resin interface, offering a feasible paradigm for high-performance BT-based composites in high-frequency electronic packaging and thermal management applications.
- 3 August 2026
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (22) , 1716
Charge compensation route dependent optimization of energy storage performance in CaTiO3-based ceramics
- 3 August 2026
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 37 (22) , 1716
Charge compensation route dependent optimization of energy storage performance in CaTiO3-based ceramics
- Open Access
- 24 March 2026
- Published by Elsevier in SSRN Electronic Journal
Functional Glass Fiber Fabric-Reinforced Bismaleimide-Triazine Composites with Enhanced Dimensional Stability and Superior High-Frequency Dielectric Performance for Advanced Electronic Packaging
The development of advanced electronic packaging substrates featuring a low coefficient of thermal expansion (CTE), low dielectric loss (Df), and excellent thermal stability is essential for meeting the escalating demands of high-frequency communication and ultra-high-density interconnections in modern integrated circuits. Herein, a facile and effective interfacial engineering strategy is reported, in which continuous glass fiber fabric (GFF) is surface-modified with an amino silane coupling agent and subsequently incorporated into a SiO2/bismaleimide-triazine (BT-C) matrix. Precise control of the silane concentration effectively suppressed the formation of micro-voids and interfacial polarization, establishing a dense covalently bonded network that enhanced the interfacial compatibility between the inorganic GFF and the BT-C matrix. This optimized interface facilitates efficient stress transfer and severely restricts the thermal expansion of surrounding polymer chains. The fabricated BT-based composites exhibit outstanding dimensional stability and high-frequency dielectric properties, with the in-plane CTE lowered to 9.4 ppm/°C, the Df at 10 GHz reduced to 0.0037, and a glass transition temperature exceeding 278 °C. Moreover, the composite demonstrates superior moisture resistance and enhanced through-plane thermal conductivity (0.79 W/m·K). This work provides a highly scalable and robust strategy for fabricating high-performance substrates tailored for next-generation high-frequency integrated circuit packaging.
- 24 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessFunctional Glass Fiber Fabric-Reinforced Bismaleimide-Triazine Composites with Enhanced Dimensional Stability and Superior High-Frequency Dielectric Performance for Advanced Electronic Packaging
The development of advanced electronic packaging substrates featuring a low coefficient of thermal expansion (CTE), low dielectric loss (Df), and excellent thermal stability is essential for meeting the escalating demands of high-frequency communication and ultra-high-density interconnections in modern integrated circuits. Herein, a facile and effective interfacial engineering strategy is reported, in which continuous glass fiber fabric (GFF) is surface-modified with an amino silane coupling agent and subsequently incorporated into a SiO2/bismaleimide-triazine (BT-C) matrix. Precise control of the silane concentration effectively suppressed the formation of micro-voids and interfacial polarization, establishing a dense covalently bonded network that enhanced the interfacial compatibility between the inorganic GFF and the BT-C matrix. This optimized interface facilitates efficient stress transfer and severely restricts the thermal expansion of surrounding polymer chains. The fabricated BT-based composites exhibit outstanding dimensional stability and high-frequency dielectric properties, with the in-plane CTE lowered to 9.4 ppm/°C, the Df at 10 GHz reduced to 0.0037, and a glass transition temperature exceeding 278 °C. Moreover, the composite demonstrates superior moisture resistance and enhanced through-plane thermal conductivity (0.79 W/m·K). This work provides a highly scalable and robust strategy for fabricating high-performance substrates tailored for next-generation high-frequency integrated circuit packaging.
- 9 June 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (29) , 14943-14952
Optimized dielectric performance in bismaleimide–triazine resin via a dual-modification strategy for high-frequency electronic packaging
High-speed and high-quality signal transmission in the fifth-generation mobile communication system poses significant challenges for the dielectric properties and operational reliability of existing electronic packaging materials. In this study, a synergistic modification of bismaleimide–triazine (BT) resin was conducted using diallyl bisphenol A (DBA) and polyphenylene oxide (PPO) to optimize the comprehensive performance of the polymer composite, particularly in terms of dielectric, mechanical, and thermal performance. Specifically, the dielectric constant (Dk) and dielectric loss were reduced from 2.75 and 0.0084 to 2.72 and 0.0041 at 10 GHz, respectively, while maintaining excellent Dk stability across a broad temperature range of −40 to 140 °C. Moreover, the glass transition temperature (Tg) of the modified BT resin reached 279.1 °C (an increase of 16.7 °C compared to pristine BT resin), and the bending strength was as high as 225.8 MPa. This work provides a promising strategy for developing high-performance BT-based electronic packaging materials.
- 9 June 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 13 (29) , 14943-14952
Optimized dielectric performance in bismaleimide–triazine resin via a dual-modification strategy for high-frequency electronic packaging
High-speed and high-quality signal transmission in the fifth-generation mobile communication system poses significant challenges for the dielectric properties and operational reliability of existing electronic packaging materials. In this study, a synergistic modification of bismaleimide–triazine (BT) resin was conducted using diallyl bisphenol A (DBA) and polyphenylene oxide (PPO) to optimize the comprehensive performance of the polymer composite, particularly in terms of dielectric, mechanical, and thermal performance. Specifically, the dielectric constant (Dk) and dielectric loss were reduced from 2.75 and 0.0084 to 2.72 and 0.0041 at 10 GHz, respectively, while maintaining excellent Dk stability across a broad temperature range of −40 to 140 °C. Moreover, the glass transition temperature (Tg) of the modified BT resin reached 279.1 °C (an increase of 16.7 °C compared to pristine BT resin), and the bending strength was as high as 225.8 MPa. This work provides a promising strategy for developing high-performance BT-based electronic packaging materials.
- 6 June 2025
- Published by Elsevier in Ceramics International
- Vol. 51 (23) , 38277-38285
Functional core-shell fillers reinforced polyolefin composites with synergistically enhanced thermal and dielectric properties for advanced microwave substrate applications
- 6 June 2025
- Published by Elsevier in Ceramics International
- Vol. 51 (23) , 38277-38285
Functional core-shell fillers reinforced polyolefin composites with synergistically enhanced thermal and dielectric properties for advanced microwave substrate applications
- 3 May 2025
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 54 (7) , 4965-4980
Recent Advances of Polyphenylene Oxide-Based Composite in Manufacturing and Properties for Microwave Substrate Applications: A Review
- 3 May 2025
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 54 (7) , 4965-4980
Recent Advances of Polyphenylene Oxide-Based Composite in Manufacturing and Properties for Microwave Substrate Applications: A Review
- 3 May 2025
- Published by Springer Nature in Journal of Materials Science
- Vol. 60 (18) , 7627-7640
Design of polyphenylene oxide-based covalent cross-linking network: a microwave dielectric substrate with low dielectric constant and high thermal stability
- 3 May 2025
- Published by Springer Nature in Journal of Materials Science
- Vol. 60 (18) , 7627-7640
Design of polyphenylene oxide-based covalent cross-linking network: a microwave dielectric substrate with low dielectric constant and high thermal stability
- 16 April 2025
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 12 (15) , 4629-4644
A superparaelectric design with structure optimization enables superior energy-storage performances and stabilities in (Na 0.5 Bi 0.5 )TiO 3 -based ceramics
Boosting the energy-storage performances of (Na 0.5 Bi 0.5 )TiO 3 -based ceramics by a superparaelectric design with structure optimization.
- 16 April 2025
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 12 (15) , 4629-4644
A superparaelectric design with structure optimization enables superior energy-storage performances and stabilities in (Na 0.5 Bi 0.5 )TiO 3 -based ceramics
Boosting the energy-storage performances of (Na 0.5 Bi 0.5 )TiO 3 -based ceramics by a superparaelectric design with structure optimization.