José Jimmy Jaime-Rodríguez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
José Jimmy Jaime-Rodríguez has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Jose Martin Luna Rivera
Universidad Autónoma de San Luis Potosí
6 shared publications C. A. Gutierrez
Universidad Autonoma de San Luis Potosi, San Luis Potosi, 78290, Mexico
4 shared publications- Carlos Adrian Gutierrez Diaz de Leon
Faculty of Science, Universidad Autnoma de San Luis Potos, San Luis Potos, Mexico
4 shared publications - Daniel Ulises Campos Delgado
Universidad Autónoma de San Luis Potosí
4 shared publications - Javier Vázquez-Castillo
Department of Electrical Engineering, University of Quintana Roo, Chetumal 77019, Mexico
3 shared publications - Ramiro Velázquez
Facultad de Ingeniería, Universidad Panamericana, Aguascalientes 20296, Mexico
3 shared publications
Latest Publications
- Open Access
- 12 October 2024
- Published by Tecnológico Nacional de México / Instituto Tecnológico de Chihuahua in Revista ELECTRO
- Vol. 46 (1) , 302-308
Diseño y Construcción de un Cilindro Neumático para Prácticas de Automatización Industrial en el Marco de la Educación STEM
Los actuadores neumáticos son cruciales en proyectos de automatización industrial que emplean PLCs (Controladores Lógicos Programables) y HMI (Interfaz Humano-Máquina), destacándose por sus ventajas sobre otros tipos de actuadores. Es esencial que los estudiantes no solo comprendan su funcionamiento, sino que también adquieran la habilidad de diseñar y construir estos dispositivos. Este trabajo se enfoca en crear un cilindro neumático de doble efecto mediante tecnologías como impresión 3D y maquinado CNC. Dicho cilindro servirá como modelo para prácticas referentes a espacios de formación relacionados con automatización industrial, diseño de máquinas, PLCs, circuitos hidráulicos y neumáticos, y procesos de manufactura. El objetivo es abarcar diversas áreas de formación bajo la metodología STEM (Ciencia, Tecnología, Ingeniería y Matemáticas), buscando fortalecer la asimilación de conocimientos teórico-prácticos. Este enfoque pretende generar resultados que enriquezcan la educación en automatización industrial, preparando a los estudiantes para enfrentar los desafíos del mundo laboral actual.
- 12 October 2024
- Published by Tecnológico Nacional de México / Instituto Tecnológico de Chihuahua in Revista ELECTRO
- Vol. 46 (1) , 302-308
Open AccessDiseño y Construcción de un Cilindro Neumático para Prácticas de Automatización Industrial en el Marco de la Educación STEM
Los actuadores neumáticos son cruciales en proyectos de automatización industrial que emplean PLCs (Controladores Lógicos Programables) y HMI (Interfaz Humano-Máquina), destacándose por sus ventajas sobre otros tipos de actuadores. Es esencial que los estudiantes no solo comprendan su funcionamiento, sino que también adquieran la habilidad de diseñar y construir estos dispositivos. Este trabajo se enfoca en crear un cilindro neumático de doble efecto mediante tecnologías como impresión 3D y maquinado CNC. Dicho cilindro servirá como modelo para prácticas referentes a espacios de formación relacionados con automatización industrial, diseño de máquinas, PLCs, circuitos hidráulicos y neumáticos, y procesos de manufactura. El objetivo es abarcar diversas áreas de formación bajo la metodología STEM (Ciencia, Tecnología, Ingeniería y Matemáticas), buscando fortalecer la asimilación de conocimientos teórico-prácticos. Este enfoque pretende generar resultados que enriquezcan la educación en automatización industrial, preparando a los estudiantes para enfrentar los desafíos del mundo laboral actual.
- Open Access
- 12 October 2024
- Published by Tecnológico Nacional de México / Instituto Tecnológico de Chihuahua in Revista ELECTRO
- Vol. 46 (1) , 110-114
Sintonización de Ganancias de Controladores PID: Métodos Experimentales y Analíticos
Los controladores PID (Proporcional, Integral, Derivativo), son ampliamente utilizados en la industria por su versatilidad y fácil implementación en diversos sistemas basados en PLC’s. microcontroladores, computadoras, etc. Para su correcto funcionamiento, es necesario sintonizar de manera apropiada las ganancias del controlador, teniendo para esto desde métodos heurísticos, hasta métodos por cómputo evolutivo. En este trabajo se muestra la sintonización de un controlador PID mediante dos métodos experimentales y un método analítico para propósitos de docencia. Los controladores son probados mediante simulaciones y método experimental en una planta de segundo orden construida con amplificadores operacionales. De esta manera los alumnos pueden complementar los conocimientos teóricos aprendidos en clase.
- 12 October 2024
- Published by Tecnológico Nacional de México / Instituto Tecnológico de Chihuahua in Revista ELECTRO
- Vol. 46 (1) , 110-114
Open AccessSintonización de Ganancias de Controladores PID: Métodos Experimentales y Analíticos
Los controladores PID (Proporcional, Integral, Derivativo), son ampliamente utilizados en la industria por su versatilidad y fácil implementación en diversos sistemas basados en PLC’s. microcontroladores, computadoras, etc. Para su correcto funcionamiento, es necesario sintonizar de manera apropiada las ganancias del controlador, teniendo para esto desde métodos heurísticos, hasta métodos por cómputo evolutivo. En este trabajo se muestra la sintonización de un controlador PID mediante dos métodos experimentales y un método analítico para propósitos de docencia. Los controladores son probados mediante simulaciones y método experimental en una planta de segundo orden construida con amplificadores operacionales. De esta manera los alumnos pueden complementar los conocimientos teóricos aprendidos en clase.
- Open Access
- 24 July 2020
- Published by MDPI AG in Electronics
- Vol. 9 (8) , 1190
A Non-WSSUS Channel Simulator for V2X Communication Systems
This paper presents a simulator of non-wide sense stationary uncorrelated scattering (non-WSSUS) multipath fading channels for the performance analysis of vehicle-to-everything (V2X) communication systems. The proposed simulator is constructed with the combination of the Monte Carlo and sum-of-cisoids (SOC) principles, and it is suitable for multicarrier transmission schemes such as those defined for dedicated short-range communications (DSRC) and cellular-based V2X (C-V2X) communications. The channel simulator provides an accurate and flexible solution to reproduce the time and frequency (TF) correlation properties of non-WSSUS vehicular channels under arbitrary isotropic and non-isotropic scattering conditions. Furthermore, the proposed simulator allows velocity variations and non-linear trajectories of the mobile stations (MSs). To demonstrate the practical value of the presented simulator, we evaluate the bit error rate (BER) performance of two channel estimation techniques that are considered for IEEE 802.11p transceivers, namely the least squares (LS) estimator and the spectral temporal averaging (STA) technique. The BER performance of both channel estimators was analyzed by considering three propagating scenarios for road safety applications. Our results show that the non-stationary characteristics of the vehicular multipath fading channel have nearly no effects on the LS estimator’s BER performance. In contrast, the performance of the STA estimator is significantly affected by the channel’s non-stationary characteristics. A variation of the original STA technique that applies only a temporal averaging is introduced in this work to improve the system’s BER in non-WSSUS channels.
- 24 July 2020
- Published by MDPI AG in Electronics
- Vol. 9 (8) , 1190
Open AccessA Non-WSSUS Channel Simulator for V2X Communication Systems
This paper presents a simulator of non-wide sense stationary uncorrelated scattering (non-WSSUS) multipath fading channels for the performance analysis of vehicle-to-everything (V2X) communication systems. The proposed simulator is constructed with the combination of the Monte Carlo and sum-of-cisoids (SOC) principles, and it is suitable for multicarrier transmission schemes such as those defined for dedicated short-range communications (DSRC) and cellular-based V2X (C-V2X) communications. The channel simulator provides an accurate and flexible solution to reproduce the time and frequency (TF) correlation properties of non-WSSUS vehicular channels under arbitrary isotropic and non-isotropic scattering conditions. Furthermore, the proposed simulator allows velocity variations and non-linear trajectories of the mobile stations (MSs). To demonstrate the practical value of the presented simulator, we evaluate the bit error rate (BER) performance of two channel estimation techniques that are considered for IEEE 802.11p transceivers, namely the least squares (LS) estimator and the spectral temporal averaging (STA) technique. The BER performance of both channel estimators was analyzed by considering three propagating scenarios for road safety applications. Our results show that the non-stationary characteristics of the vehicular multipath fading channel have nearly no effects on the LS estimator’s BER performance. In contrast, the performance of the STA estimator is significantly affected by the channel’s non-stationary characteristics. A variation of the original STA technique that applies only a temporal averaging is introduced in this work to improve the system’s BER in non-WSSUS channels.
- Open Access
- 23 August 2019
- Published by Universidad de Antioquia in Revista Facultad de Ingeniería Universidad de Antioquia
- No. 93,p. 32-40
Doppler spectrum measurements of vehicular radio channels using a narrowband sounder
This paper describes the implementation of a narrowband sounder for Doppler power spectrum (DPS) measurements of vehicular communication channels. The narrowband channel sounder is implemented using general purpose equipment, making such measurement platform easy to replicate for didactic and research purposes. To demonstrate the practical value of this framework, a measurement campaign was conducted to obtain empirical information about the spectral characteristics of vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) multipath radio channels in the 700 MHz band. The collected data were processed to compute the average Doppler shift and the Doppler spread of the measured channels. The obtained results show that the spectral properties of frequency-dispersive vehicular radio channels can be effectively analyzed using narrowband sounding principles.
- 23 August 2019
- Published by Universidad de Antioquia in Revista Facultad de Ingeniería Universidad de Antioquia
- No. 93,p. 32-40
Open AccessDoppler spectrum measurements of vehicular radio channels using a narrowband sounder
This paper describes the implementation of a narrowband sounder for Doppler power spectrum (DPS) measurements of vehicular communication channels. The narrowband channel sounder is implemented using general purpose equipment, making such measurement platform easy to replicate for didactic and research purposes. To demonstrate the practical value of this framework, a measurement campaign was conducted to obtain empirical information about the spectral characteristics of vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) multipath radio channels in the 700 MHz band. The collected data were processed to compute the average Doppler shift and the Doppler spread of the measured channels. The obtained results show that the spectral properties of frequency-dispersive vehicular radio channels can be effectively analyzed using narrowband sounding principles.
- 1 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Monte Carlo Simulator of non-WSSUS Rayleigh Fading Channels for Vehicular Communications
This paper presents a new simulator of non-wide-sense-stationary uncorrelated scattering (non-WSSUS) multipath Rayleigh fading channels for the performance analysis of vehicular communication systems. The proposed simulator is based on the Montecarlo method and the sum-of-cisoids principle. It provides an accurate and flexible solution to reproduce the time and frequency correlation properties of non-WSSUS vehicular channels under arbitrary isotropic and non-isotropic scattering conditions. A performance analysis of two channel estimation techniques, namely the least-squares (LS) and the spectral-temporal-averaging (STA) estimators, is presented to demonstrate the practical value of the proposed simulator. The results show that the vehicular channel's non-stationary characteristics are transparent to the LS estimator, but they significantly degrade the performance of the STA estimator. A variation of the original STA technique is introduced seeking a performance improvement in non-WSSUS channels.
- 1 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Monte Carlo Simulator of non-WSSUS Rayleigh Fading Channels for Vehicular Communications
This paper presents a new simulator of non-wide-sense-stationary uncorrelated scattering (non-WSSUS) multipath Rayleigh fading channels for the performance analysis of vehicular communication systems. The proposed simulator is based on the Montecarlo method and the sum-of-cisoids principle. It provides an accurate and flexible solution to reproduce the time and frequency correlation properties of non-WSSUS vehicular channels under arbitrary isotropic and non-isotropic scattering conditions. A performance analysis of two channel estimation techniques, namely the least-squares (LS) and the spectral-temporal-averaging (STA) estimators, is presented to demonstrate the practical value of the proposed simulator. The results show that the vehicular channel's non-stationary characteristics are transparent to the LS estimator, but they significantly degrade the performance of the STA estimator. A variation of the original STA technique is introduced seeking a performance improvement in non-WSSUS channels.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Doppler Power Spectrum Measurements of Vehicular Channels in the 700 MHz Band
The following topics are dealt with: quality of service; wireless LAN; wireless sensor networks; embedded systems; public domain software; Android (operating system); mobile computing; energy conservation; mobile radio; energy consumption.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Doppler Power Spectrum Measurements of Vehicular Channels in the 700 MHz Band
The following topics are dealt with: quality of service; wireless LAN; wireless sensor networks; embedded systems; public domain software; Android (operating system); mobile computing; energy conservation; mobile radio; energy consumption.
- 1 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Bit error rate performance analysis of vehicular communication systems considering velocity variations of the mobile stations
This paper presents a bit error rate (BER) performance analysis of vehicular communication systems (VCS) based on the IEEE 802.11p standard assuming velocity variations of the mobile stations (MSs). To that end, we propose a novel Monte Carlo vehicle-to-vehicle (V2V) fading channel simulator that takes into account the accelerated motion and trajectory variations of the MSs. On the grounds of the proposed channel simulator, we assess the impact of the MSs' velocity variations on the system's BER performance. We assume that the channel state information is obtained following the least-squares (LS) channel estimation techniques that are commonly implemented in commercial off-the-shelf WiFi devices. The results show that the velocity variations have in general a slight impact on the system's BER performance. However, the performance is aggravated as the data frame length or the relative speed increases. The simulation framework presented in this paper can be used as a benchmark to evaluate the performance of the emerging VCS in safety critical scenarios.
- 1 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Bit error rate performance analysis of vehicular communication systems considering velocity variations of the mobile stations
This paper presents a bit error rate (BER) performance analysis of vehicular communication systems (VCS) based on the IEEE 802.11p standard assuming velocity variations of the mobile stations (MSs). To that end, we propose a novel Monte Carlo vehicle-to-vehicle (V2V) fading channel simulator that takes into account the accelerated motion and trajectory variations of the MSs. On the grounds of the proposed channel simulator, we assess the impact of the MSs' velocity variations on the system's BER performance. We assume that the channel state information is obtained following the least-squares (LS) channel estimation techniques that are commonly implemented in commercial off-the-shelf WiFi devices. The results show that the velocity variations have in general a slight impact on the system's BER performance. However, the performance is aggravated as the data frame length or the relative speed increases. The simulation framework presented in this paper can be used as a benchmark to evaluate the performance of the emerging VCS in safety critical scenarios.
- Open Access
- 3 October 2017
- Published by Wiley in Wireless Communications and Mobile Computing
- Vol. 2017, 1-15
Modeling of Non-WSSUS Double-Rayleigh Fading Channels for Vehicular Communications
This paper deals with the modeling of nonstationary time-frequency (TF) dispersive multipath fading channels for vehicle-to-vehicle (V2V) communication systems. As a main contribution, the paper presents a novel geometry-based statistical channel model that facilitates the analysis of the nonstationarities of V2V fading channels arising at a small-scale level due to the time-varying nature of the propagation delays. This new geometrical channel model has been formulated following the principles of plane wave propagation (PWP) and assuming that the transmitted signal reaches the receiver antenna through double interactions with multiple interfering objects (IOs) randomly located in the propagation area. As a consequence of such interactions, the first-order statistics of the channel model’s envelope are shown to follow a worse-than-Rayleigh distribution; specifically, they follow a double-Rayleigh distribution. General expressions are derived for the envelope and phase distributions, four-dimensional (4D) TF correlation function (TF-CF), and TF-dependent delay and Doppler profiles of the proposed channel model. Such expressions are valid regardless of the underlying geometry of the propagation area. Furthermore, a closed-form solution of the 4D TF-CF is presented for the particular case of the geometrical two-ring scattering model. The obtained results provide new theoretical insights into the correlation and spectral properties of small-scale nonstationary V2V double-Rayleigh fading channels.
- 3 October 2017
- Published by Wiley in Wireless Communications and Mobile Computing
- Vol. 2017, 1-15
Open AccessModeling of Non-WSSUS Double-Rayleigh Fading Channels for Vehicular Communications
This paper deals with the modeling of nonstationary time-frequency (TF) dispersive multipath fading channels for vehicle-to-vehicle (V2V) communication systems. As a main contribution, the paper presents a novel geometry-based statistical channel model that facilitates the analysis of the nonstationarities of V2V fading channels arising at a small-scale level due to the time-varying nature of the propagation delays. This new geometrical channel model has been formulated following the principles of plane wave propagation (PWP) and assuming that the transmitted signal reaches the receiver antenna through double interactions with multiple interfering objects (IOs) randomly located in the propagation area. As a consequence of such interactions, the first-order statistics of the channel model’s envelope are shown to follow a worse-than-Rayleigh distribution; specifically, they follow a double-Rayleigh distribution. General expressions are derived for the envelope and phase distributions, four-dimensional (4D) TF correlation function (TF-CF), and TF-dependent delay and Doppler profiles of the proposed channel model. Such expressions are valid regardless of the underlying geometry of the propagation area. Furthermore, a closed-form solution of the 4D TF-CF is presented for the particular case of the geometrical two-ring scattering model. The obtained results provide new theoretical insights into the correlation and spectral properties of small-scale nonstationary V2V double-Rayleigh fading channels.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
On the spectral moments of non-WSSUS mobile-to mobile double-Rayleigh fading channels
This paper deals with the mathematical analysis of the spectral moments of non-wide-sensestationary uncorrelated-scattering (non-WSSUS) mobile-to-mobile (M2M) double-Rayleigh fading channels. The point of departure is a recently proposed geometry-based statistical model (GBSM) for M2M double-Rayleigh fading channels from which general analytical expressions are derived for the average Doppler shift, Doppler spread, average delay, and delay spread. Closed-form solutions of such expressions are presented for the particular case of the geometrical two-rings scattering model. The obtained results indicate that the average Doppler shift and Doppler spread are directly influenced by not only the carrier frequency, but also the bandwidth of the communication system. A consistency analysis is carried out to assess the physical soundness of the reference channel model. The results show that the channel model fulfills all the consistency criteria pertaining to the spectral moments. The analysis presented here can be used as a guideline for the statistical characterization of non-WSSUS time- and frequency-selective M2M fading channels.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
On the spectral moments of non-WSSUS mobile-to mobile double-Rayleigh fading channels
This paper deals with the mathematical analysis of the spectral moments of non-wide-sensestationary uncorrelated-scattering (non-WSSUS) mobile-to-mobile (M2M) double-Rayleigh fading channels. The point of departure is a recently proposed geometry-based statistical model (GBSM) for M2M double-Rayleigh fading channels from which general analytical expressions are derived for the average Doppler shift, Doppler spread, average delay, and delay spread. Closed-form solutions of such expressions are presented for the particular case of the geometrical two-rings scattering model. The obtained results indicate that the average Doppler shift and Doppler spread are directly influenced by not only the carrier frequency, but also the bandwidth of the communication system. A consistency analysis is carried out to assess the physical soundness of the reference channel model. The results show that the channel model fulfills all the consistency criteria pertaining to the spectral moments. The analysis presented here can be used as a guideline for the statistical characterization of non-WSSUS time- and frequency-selective M2M fading channels.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
First-order statistics analysis of two new geometrical models for non-WSSUS mobile-to-mobile channels
In this paper, we analyze the first-order (FO) statistics of two new geometry-based statistical models for small-scale nonstationary time-frequency (TF) dispersive mobile-to-mobile (M2M) fading channels. We derive exact analytic expressions for the joint and marginal probability density functions (PDFs) of the envelope and phase of both models. In addition, we analyze the asymptotic behavior of these PDFs as the number of multipath components of the received signal approaches infinity. The obtained results are of practical relevance, as they can be used as a benchmark to investigate the influence of the small-scale fading statistics of nonstationary channels on the M2M communication systems' performance.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
First-order statistics analysis of two new geometrical models for non-WSSUS mobile-to-mobile channels
In this paper, we analyze the first-order (FO) statistics of two new geometry-based statistical models for small-scale nonstationary time-frequency (TF) dispersive mobile-to-mobile (M2M) fading channels. We derive exact analytic expressions for the joint and marginal probability density functions (PDFs) of the envelope and phase of both models. In addition, we analyze the asymptotic behavior of these PDFs as the number of multipath components of the received signal approaches infinity. The obtained results are of practical relevance, as they can be used as a benchmark to investigate the influence of the small-scale fading statistics of nonstationary channels on the M2M communication systems' performance.