Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Guglielmo Lomonaco has a total of 201 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Preliminary Thermal-hydraulic Analysis of Subcritical Fission Zone for Conceptual Test Blanket Module Driven by Fusion Neutrons

    by Francesco Devia, Fabio Panza, Guglielmo Lomonaco, Seyed Kamal Mousavibalgehshiri

  • Open Access

    Preliminary Thermal-hydraulic Analysis of Proposed Simplified Test Blanket Module (TBM) as a Subcritical Reactor Driven by Fusion Neutrons

    by Francesco Devia, Fabio Panza, Guglielmo Lomonaco, Seyed Kamal Mousavibalgehshiri

    Developing fusion-fission hybrid systems offers a promising pathway to address critical challenges in energy generation and nuclear waste management. This study focuses on the thermal-hydraulic evaluation of a simplified Test Blanket Module (TBM) designed as a subcritical reactor driven by fusion neutrons. The primary objective is to assess the thermal and fluid dynamic performance of the module under steady-state conditions. The TBM is modeled as a subcritical assembly loaded with MOX fuel. Fast neutrons generated by a Reversed Field Pinch (RFP) provide adequate neutron flux to sustain fission reactions within the TBM. In the present study, the fluid dynamics analysis of the molten salt coolant flow, here a mixture of NaF and ZrF 4 , in a fission blanket for the RFX-mod2 tokamak is carried out. Thermophysical properties of the molten salt composition are considered for temperature conditions between 500 and 900°C. The thermophysical properties of the MOX fuel, which changes in the fuel composition during the blanket operation, are used assuming a burnup equal to 40MWday/kg HM . Fuel compatibility is well maintained with AISI-316 steel cladding and coolant. To specify its thermal-hydraulic behavior during normal operational conditions, the simulation has been conducted by the ANSYS-Fluent computational fluid dynamics code. Main assumptions and outcomes of this study are presented and critically discussed. The analysis results indicate that the temperature and power distribution within the module are within acceptable limits, and all components demonstrate good compatibility.

  • Open Access

    MSR Fuel and Thermohydraulic: Modeling of Energy Well Experimental Loop in TRACE Code

    by Giacomo Longhi, Guglielmo Lomonaco, Tomáš Melichar, Guido Mazzini

    The transition toward carbon-neutral energy systems has revived interest in nuclear technologies, particularly small and micro modular reactors (SMRs and MMRs) as flexible, safe and efficient alternatives to conventional large-scale power plans. In the Czech Republic, Centrum výzkumu Řez (CVŘ) is developing Energy Well (EW), a molten salt-cooled micro modular reactor concept employing FLiBe (Fluoride Lithium Beryllium) as primary and secondary coolant and a supercritical CO2 (sCO2) tertiary loop. A dedicated experimental facility was built to reproduce EW operating conditions and provide critical data on thermohydraulic behavior, fuel properties and heat-transfer mechanisms. This paper presents the development and assessment of a TRACE (TRAC/RELAP Advanced Computational Engine) model of the experimental facility, including specific methodologies for the main heater and the heat exchanger. Model accuracy was assessed through comparison with experimental commissioning data. The simulations demonstrated overall model consistency, especially regarding the heat exchanger and the main heater general performances, while some discrepancies were observed inside the main heater graphitic core. Other discrepancies were observed along the loop, mainly resulting from modeling simplifications and lack of information regarding certain experimental loop phenomena. In particular, the pressure calculation showed large inconsistencies mainly connected to the complexity of pressure measurements in molten salt circuits and the lack of specific head loss correlations. This study also helped identify broader issues in both the code (persistent error in generating CO2 property tables and instabilities resulting from FLiBe interactions with non-condensable gases) and the experimental loop (defect in the heat exchanger filling and uncertainties on sensors location), also contributing to resolving sensor-related inconsistencies in the facility. Results confirm TRACE as a reliable tool for modeling molten salt systems, regarding the temperature distribution and the heat transfer. However, depending on the specific experimental case, this paper introduces specific limitations, such as some inconsistencies in the pressure drops distribution, in order to support the future development of TRACE code. Beyond technical advances, this work provides unique experimental data and fosters international collaboration in advancing SMR and molten salt reactor technologies.


  • Nuclear Reactor Physics and Operation

    by Bahman Zohuri, Seyed Kamal Mousavi Balgehshiri, Guglielmo Lomonaco

    This book serves as a thorough reference for students, researchers, and professionals in nuclear engineering and reactor physics, offering a detailed exploration of the core principles behind nuclear reactor theory, neutron transport, neutronic analysis, and reactor core design and calculations. Each chapter includes at least one example to illustrate the topics covered, and the latter half focuses on key areas relevant to operating reactors – reactor kinetics/dynamics and in-core fuel management. Building on the foundational physics presented in the first half, it develops reactivity models using realistic reactor cross-section data and advanced analytic tools. This book is a valuable resource for engineers and scientists in the nuclear industry, as well as senior and graduate students in Nuclear Engineering, Mechanical Engineering, and Physics. Key Features Offers an in-depth examination of reactor physics, encompassing neutron interactions, reactor kinetics, reactor dynamics, fuel cycles, and safety factors, to provide a comprehensive understanding of nuclear reactor operation and design Contains clear explanations of complex theories and mathematical formulations, accompanied by illustrative diagrams, figures, and examples to facilitate comprehension Features structured chapters with learning objectives, summaries, review questions, and problem sets at varying levels of difficulty to reinforce understanding and encourage active engagement with the material

  • Plentiful Tritium generation by a FFHR to feed a fusion power plant with simplified blanket

    by R. Piovan, P. Agostinetti, S. Murgo, G. Palumbo, F. Panza, S.K.M. Balgehshiri, C. Bustreo, R. Cavazzana, M. Ciotti, D.F. Escande, et al.


  • Open Access

    An FMEA Assessment of an HTR-Based Hydrogen Production Plant

    by Lorenzo Damiani, Francesco Novarini, Guglielmo Lomonaco

    The topic of hydrogen as an energy vector is widely discussed in the present literature, being one of the crucial technologies aimed at human carbon footprint reduction. There are different hydrogen production methods. In particular, this paper focuses on Steam Methane Reforming (SMR), which requires a source of high-temperature heat (around 900 °C) to trigger the chemical reaction between steam and CH4. This paper examines a plant in which the reforming heat is supplied through a helium-cooled high-temperature nuclear reactor (HTR). After a review of the recent literature, this paper provides a description of the plant and its main components, with a central focus on the safety and reliability features of the combined nuclear and chemical system. The main aspect emphasized in this paper is the assessment of the hydrogen production reliability, carried out through Failure Modes and Effects Analysis (FMEA) with the aid of simulation software able to determine the quantity and origin of plant stops based on its operational tree. The analysis covers a time span of 20 years, and the results provide a breakdown of all the failures that occurred, together with proposals aimed at improving reliability.


  • Open Access

    A Neutron Source Based on Spherical Tokamak

    by Francesco P. Orsitto, Nunzio Burgio, Marco Ciotti, Guglielmo Lomonaco, Fabio Panza, Alfonso Santagata

    The paper presents a conceptual study of a neutron source based on a spherical tokamak (ST). The plasma scenario chosen for the ST is non-thermal fusion (hot ion mode), which is extensively used on machines like JET and TFTR deuterium–tritium (DT) experiments, which seems suited for low fusion gain reactors. As demonstrated in experiments, this scenario is a robust tool for neutron production. Starting from a new scaling law of energy confinement tested, approximately, on ST40 spherical tokamak, the parameters of a 15 MW ST DT fusion reactor (ST180) are derived, and a preliminary radial build of the machine is established.

  • Open Access

    Parametrical Choice of the Optimized Fusion System for a FFHR

    by Stefano Murgo, Guglielmo Lomonaco, Francesco Paolo Orsitto, Fabio Panza, Nicola Pompeo

    Fusion–fission hybrid reactors are concepts of subcritical reactors based on the coupling of fusion and fission devices. In this case, the fusion reactor would work as an external neutron supplier for the fission core of the machine. Such systems could, in principle, operate as multi-purpose machines, such as energy generators, breeders and waste burners. The large availability of fusion and fission technologies makes the choice of devices to couple quite chaotic. In fact, most of the concepts proposed in the literature are based on attempts without real optimization. The purpose of this paper is to propose a parameter which could provide practical information regarding the choice or the design of the fusion system of an FFHR. An engineering approach based on the estimation of the energy efficiency of FFHRs was used. An evaluation of the parameter and some of its possible practical applications are shown. Obtained results indicate that, from a geometrical point of view, compact machines would need lower Q-values to reach high neutron source performance.


  • Open Access

    RFP-MSR Hybrid Reactor Model for Tritium Breeding and Actinides Transmutation †

    by Stefano Murgo, Chiara Bustreo, Marco Ciotti, Guglielmo Lomonaco, Francesco Paolo Orsitto, Roberto Piovan, Nicola Pompeo, Giovanni Ricco, Marco Ripani, Fabio Panza

    The studies on the development of fusion–fission hybrid reactors (FFHR) have gained consensus in recent years as an intermediate step before fusion energy. This work proposes a possible approach to FFHRs based on the coupling of a Reversed Field Pinch fusion machine and a Molten Salt Subcritical fission test bed. The proposed test bed is characterized by the coexistence of a fast-neutron fission core and a dedicated thermal-neutron zone, allowing the performing of tritium breeding and actinides transmutation studies. The neutronic design solutions and the results obtained by the irradiation of FLiBe salt (inside the thermal-neutron zone) and of an actinide target (inside the core) are shown. The outcomes of the analysis reveal the potential of FFHR systems as breeding/burner systems. In particular, the results regarding tritium breeding are very encouraging as the system is demonstrated to be able to reach a very high Tritium Breeding Ratio.


  • Open Access

    Multi-group analysis of Minor Actinides transmutation in a Fusion Hybrid Reactor

    by Stefano Murgo, Marco Ciotti, Guglielmo Lomonaco, Nicola Pompeo, Fabio Panza

    New nuclear technologies are currently being study to face High Level Waste treatment and disposal issues. Generally, GEN-IV fission Fast Reactors (FR) are considered the waste-burners of the future. In fact, a fast flux turns out to be the best choice for actinides irradiation in critical reactors because of favorable cross section conditions. Differently, Fusion Fission Hybrid Reactors (FFHR) are futuristic devices based on the combination of fusion and fission systems and could represent an alternative to FRs. In such systems, the choice spectrum of the neutron flux that irradiates HLW may be non-obvious due to some operational constraints which have to be considered. To design and optimize these systems as waste-burners, one should fully understand the transmutation dynamics occurring into the fission region. A multi-energy-group analysis by FISPACT-II code has been set to analyze the conversion processes in scenarios characterized by different neutron energy spectra and fluences. The results of this study show that, despite fast fluxes are characterized by better behaviors in terms of radiotoxicity treatment, the difficulties of reaching high reaction yields may require solutions involving moderators or broadened neutron fluxes to increase the reactions probabilities and, consequently, actinides mass conversion yield.