Patrik Vagovic
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Patrik Vagovic has a total of 171 co-authors. Here are the top co-authors by number of shared publications:
- Jayanath C. P. Koliyadu
European XFEL, Holzkoppel 4, 22869 Schenefeld, Germany
6 shared publications - Tokushi Sato
European XFEL, Holzkoppel 4, 22869 Schenefeld, Germany
6 shared publications D. Korytár
Institute for Electrical Engineering, Slovak Academy of Sciences, Bratislava, Slovakia
4 shared publications- Zdenko Zápražný
Institute of Electrical Engineering, Slovak Academy of Sciences
4 shared publications A. Cecilia
ANKA Light Source, Karlsruhe Institute of Technology, Karlsruhe, Germany
3 shared publicationsAdrian P. Mancuso
European XFEL
3 shared publications
Latest Publications
- 1 July 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (7)
High resolution x-ray radiography of pulsed power-driven foil explosions
We present x-ray radiographs of underwater electrically driven exploding copper foils of different thickness, captured at the European X-ray Free-Electron Laser (EuXFEL) using 20 keV (∼30 eV bandwidth) self-amplified spontaneous emission photon beams. The foils were exploded by a ∼30 kA amplitude, ∼1.1 μs rise time current pulse produced by a compact pulsed-power generator. The radiographs reveal rapid frontal expansion of foils accompanied by lateral compression. This occurs due to strong magnetic pressure at the foil edges where, due to lateral skin-effect, the temperature reaches ∼1000 K leading to a fivefold decrease in the yield strength. Furthermore, the explosion begins with the foil edges, consistent with enhanced edge heating due to lateral skin-effect. With relatively thick foils, the bulk of the foil material remains in the liquid phase, and initial longitudinal density non-uniformities, coinciding with the current direction, transform into longitudinal striations. For thinner foils which experience explosion into a plasma, spatially non-uniform density structures appear at the edges of the foil and transverse the current direction. These density modulations, which can be estimated by x-ray attenuation, may be associated with the electrothermal instability (ETI); however, the linear theory of ETI growth does not appear to be applicable at the time of observation.
- 1 July 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (7)
High resolution x-ray radiography of pulsed power-driven foil explosions
We present x-ray radiographs of underwater electrically driven exploding copper foils of different thickness, captured at the European X-ray Free-Electron Laser (EuXFEL) using 20 keV (∼30 eV bandwidth) self-amplified spontaneous emission photon beams. The foils were exploded by a ∼30 kA amplitude, ∼1.1 μs rise time current pulse produced by a compact pulsed-power generator. The radiographs reveal rapid frontal expansion of foils accompanied by lateral compression. This occurs due to strong magnetic pressure at the foil edges where, due to lateral skin-effect, the temperature reaches ∼1000 K leading to a fivefold decrease in the yield strength. Furthermore, the explosion begins with the foil edges, consistent with enhanced edge heating due to lateral skin-effect. With relatively thick foils, the bulk of the foil material remains in the liquid phase, and initial longitudinal density non-uniformities, coinciding with the current direction, transform into longitudinal striations. For thinner foils which experience explosion into a plasma, spatially non-uniform density structures appear at the edges of the foil and transverse the current direction. These density modulations, which can be estimated by x-ray attenuation, may be associated with the electrothermal instability (ETI); however, the linear theory of ETI growth does not appear to be applicable at the time of observation.
- Open Access
- 1 July 2026
- Published by Springer Nature in Research Square
Gaussian splatting for sparse-view X-ray phase-contrast reconstruction in MHz tomoscopy
MHz tomoscopy images fast dynamics from a few simultaneous X-ray projections, making 3D reconstruction severely underdetermined. We adapted 3D Gaussian Splatting to X-ray phase-contrast imaging by assigning each primitive absorption (β) and phase-shift (δ) values and embedding Fresnel propagation in a differentiable rendering pipeline. On physically simulated red blood cell holograms, the framework reconstructs phase-dominant volumes from 12 projections in 15 minutes on a single GPU.
- 1 July 2026
- Published by Springer Nature in Research Square
Open AccessGaussian splatting for sparse-view X-ray phase-contrast reconstruction in MHz tomoscopy
MHz tomoscopy images fast dynamics from a few simultaneous X-ray projections, making 3D reconstruction severely underdetermined. We adapted 3D Gaussian Splatting to X-ray phase-contrast imaging by assigning each primitive absorption (β) and phase-shift (δ) values and embedding Fresnel propagation in a differentiable rendering pipeline. On physically simulated red blood cell holograms, the framework reconstructs phase-dominant volumes from 12 projections in 15 minutes on a single GPU.
- Open Access
- 9 March 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (10)
Current shunting and plasma instabilities during electrical explosions of copper and aluminum wires in water and air
We present the first x-ray images of electrically exploding wires in air and water, captured at the European X-ray Free-Electron Laser (EuXFEL). These images reveal current shunting in a copper wire during its explosion in air, and the development of electrothermal (and possibly magnetohydrodynamic) instabilities in copper and aluminum wires exploding in water. The experiments were conducted at the Single Particles, Clusters, and Biomolecules and Serial Femtosecond Crystallography instrument (SPB/SFX) at EuXFEL, where fine metallic wires were driven by a pulsed-power generator with a current rise time of ∼1.1 μs and a peak amplitude of ∼28 kA. EuXFEL enabled MHz x-ray radiography of the wires using 20 keV photons and a narrow bandwidth of ∼40 eV. Using the specific current action integral for a copper wire explosion, we provide the first quantitative estimate of the fraction of current that is shunted through the surrounding medium of an exploding wire. Fourier analysis of the electrothermal instability spectrum shows that its wavelength remains mostly independent of the wire diameter once it has exploded, and that the temperature perturbation is similar in magnitude to the average temperature in the wire.
- 9 March 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (10)
Open AccessCurrent shunting and plasma instabilities during electrical explosions of copper and aluminum wires in water and air
We present the first x-ray images of electrically exploding wires in air and water, captured at the European X-ray Free-Electron Laser (EuXFEL). These images reveal current shunting in a copper wire during its explosion in air, and the development of electrothermal (and possibly magnetohydrodynamic) instabilities in copper and aluminum wires exploding in water. The experiments were conducted at the Single Particles, Clusters, and Biomolecules and Serial Femtosecond Crystallography instrument (SPB/SFX) at EuXFEL, where fine metallic wires were driven by a pulsed-power generator with a current rise time of ∼1.1 μs and a peak amplitude of ∼28 kA. EuXFEL enabled MHz x-ray radiography of the wires using 20 keV photons and a narrow bandwidth of ∼40 eV. Using the specific current action integral for a copper wire explosion, we provide the first quantitative estimate of the fraction of current that is shunted through the surrounding medium of an exploding wire. Fourier analysis of the electrothermal instability spectrum shows that its wavelength remains mostly independent of the wire diameter once it has exploded, and that the temperature perturbation is similar in magnitude to the average temperature in the wire.
- Open Access
- 6 March 2026
- Published by Oxford University Press (OUP) in Insect Systematics and Diversity
- Vol. 10 (2)
When mayflies have an erection: functional morphology of the genitalia in Ecdyonurus (Ephemeroptera: Heptageniidae)
The aerial copulation of the mayfly Ecdyonurus venosus (Fabricius, 1775) and Ecdyonurus submontanus Landa, 1969 is described based on SEM, dissections, histological serial sections, and µ-CT. The abdomina of a pair in copula and a resting male specimen are reconstructed, with emphasis on sclerites, musculature and associated muscles of the genitalia and the male gonopods. The resulting models reveal a change in penis configuration while the penis is located inside the female vestibulum. This change is facilitated by a pair of intrinsic penis muscles. Its action leads to a depression of the penis shaft sclerite, which is associated with an upward rotation of the penis lobes and the eversion of a pair of spike-like titillators. Once exposed inside the female vestibulum, the penes are slightly moved dorsally. This movement is facilitated by a pair of extrinsic penis muscles. Thereby, the everted titillators are pricking into the female intersegmental membrane between sternites VII and VIII. In this way, the titillators act as an anchoring device, fixing the penes within the female vestibulum and enlarging the latter during copulation. The evolutionary implications of these findings are discussed, and a new nomenclature for the copulatory organs is proposed.
- 6 March 2026
- Published by Oxford University Press (OUP) in Insect Systematics and Diversity
- Vol. 10 (2)
Open AccessWhen mayflies have an erection: functional morphology of the genitalia in Ecdyonurus (Ephemeroptera: Heptageniidae)
The aerial copulation of the mayfly Ecdyonurus venosus (Fabricius, 1775) and Ecdyonurus submontanus Landa, 1969 is described based on SEM, dissections, histological serial sections, and µ-CT. The abdomina of a pair in copula and a resting male specimen are reconstructed, with emphasis on sclerites, musculature and associated muscles of the genitalia and the male gonopods. The resulting models reveal a change in penis configuration while the penis is located inside the female vestibulum. This change is facilitated by a pair of intrinsic penis muscles. Its action leads to a depression of the penis shaft sclerite, which is associated with an upward rotation of the penis lobes and the eversion of a pair of spike-like titillators. Once exposed inside the female vestibulum, the penes are slightly moved dorsally. This movement is facilitated by a pair of extrinsic penis muscles. Thereby, the everted titillators are pricking into the female intersegmental membrane between sternites VII and VIII. In this way, the titillators act as an anchoring device, fixing the penes within the female vestibulum and enlarging the latter during copulation. The evolutionary implications of these findings are discussed, and a new nomenclature for the copulatory organs is proposed.
- Open Access
- 1 March 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (3)
Experimental investigation of cavitation dynamics at mesoscale and microscale in swirled and non-swirled venturi tubes
Hydrodynamic cavitation has been widely used in various applications, namely, peening, surface cleaning, and wastewater treatment. Recent studies have demonstrated that introducing swirl in hydrodynamic cavitation can substantially enhance process efficiency. However, a knowledge gap remains regarding the comparative characteristics of hydrodynamic cavitation in swirled and non-swirled flows at the mesoscale and microscale. In this study, we utilize shadowgraph and high-speed phase-contrast x-ray imaging techniques alongside spectral proper orthogonal decomposition to resolve such characteristics in venturi tubes. The analyses show that imposing swirl reduces the hydraulic power delivered by the pump to initiate cavitation by 71.9%. It also makes the cavitating length of the flow less dependent on the operating condition. Investigations indicate that the non-swirled venturi tube is dominated by sheet cavitation followed by cloud cavitation. Introducing swirl shifts the cavitation toward the cloud regime established at the center of the tube while changing the coherent motions of the cavitating flow. In non-swirled flow, coherent motions are dominated by disk-like structures, while in the swirled flow, they include helical and double-helical coherent structures. Both mesoscale and microscale analyses reveal that swirl shifts the cavitation dynamics toward low-frequency coherent motions. Microscale results suggest that microbubbles from cavitation cloud collapse could trigger cavitation when they are involved in high-velocity motions.
- 1 March 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (3)
Open AccessExperimental investigation of cavitation dynamics at mesoscale and microscale in swirled and non-swirled venturi tubes
Hydrodynamic cavitation has been widely used in various applications, namely, peening, surface cleaning, and wastewater treatment. Recent studies have demonstrated that introducing swirl in hydrodynamic cavitation can substantially enhance process efficiency. However, a knowledge gap remains regarding the comparative characteristics of hydrodynamic cavitation in swirled and non-swirled flows at the mesoscale and microscale. In this study, we utilize shadowgraph and high-speed phase-contrast x-ray imaging techniques alongside spectral proper orthogonal decomposition to resolve such characteristics in venturi tubes. The analyses show that imposing swirl reduces the hydraulic power delivered by the pump to initiate cavitation by 71.9%. It also makes the cavitating length of the flow less dependent on the operating condition. Investigations indicate that the non-swirled venturi tube is dominated by sheet cavitation followed by cloud cavitation. Introducing swirl shifts the cavitation toward the cloud regime established at the center of the tube while changing the coherent motions of the cavitating flow. In non-swirled flow, coherent motions are dominated by disk-like structures, while in the swirled flow, they include helical and double-helical coherent structures. Both mesoscale and microscale analyses reveal that swirl shifts the cavitation dynamics toward low-frequency coherent motions. Microscale results suggest that microbubbles from cavitation cloud collapse could trigger cavitation when they are involved in high-velocity motions.
- Open Access
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
Quantification of the effect of ultrasound in a PEM water electrolyser with operando neutron imaging and numerical simulations
This study investigates the effect of ultrasound on the electrochemical performance of a custom polymer electrolyte membrane water electrolyser, through neutron imaging and CFD that reveal a shift from bubbly to slug flow at high current densities.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
Open AccessQuantification of the effect of ultrasound in a PEM water electrolyser with operando neutron imaging and numerical simulations
This study investigates the effect of ultrasound on the electrochemical performance of a custom polymer electrolyte membrane water electrolyser, through neutron imaging and CFD that reveal a shift from bubbly to slug flow at high current densities.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
On the collapse features of cavitation bubbles near a flat wall: Effects of pressure and tandem distribution
The collapse of cavitation bubbles is a promising mechanism for harnessing energy for various applications, namely, cavitation peening and surface cleaning. The effectiveness of this mechanism in such applications depends on the fluid dynamic features of cavitation bubbles near the target. In this paper, we study these features near a flat wall by performing numerical simulations. We developed two numerical solvers, pressure-based isothermal and density-based full thermodynamic, and evaluated their performance in predicting cavitation bubble features. The effects of ambient pressure and bubble-bubble interactions in tandem bubble pairs on cavitation bubble dynamics are assessed to provide insights into configuring cavitation bubbles for the above-mentioned applications. The results highlight that the ambient pressure changes the number of intense impact pressures and their amplitudes. For low ambient pressures, the re-evolved bubble elongating toward the wall extends to the surface and breaks into segments. The impact pressure of the wall-attached part of the re-evolved bubble is up to 70% higher than that of the first bubble collapse. Increasing the ambient pressure shifts the collapse of the re-evolved bubble away from the wall while amplifying the impact pressure by the re-entrant jet. Analyzing the flow energy indicates that raising the ambient pressure reduces the amount of extracted kinetic energy. The simulations show that placing bubbles in tandem significantly reduces the amplitude of the impact pressures. The energetic impact pressure responds non-linearly to the relative distance between bubbles, which is shown to be due to changes in the collapse location and the shock wave superposition.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
On the collapse features of cavitation bubbles near a flat wall: Effects of pressure and tandem distribution
The collapse of cavitation bubbles is a promising mechanism for harnessing energy for various applications, namely, cavitation peening and surface cleaning. The effectiveness of this mechanism in such applications depends on the fluid dynamic features of cavitation bubbles near the target. In this paper, we study these features near a flat wall by performing numerical simulations. We developed two numerical solvers, pressure-based isothermal and density-based full thermodynamic, and evaluated their performance in predicting cavitation bubble features. The effects of ambient pressure and bubble-bubble interactions in tandem bubble pairs on cavitation bubble dynamics are assessed to provide insights into configuring cavitation bubbles for the above-mentioned applications. The results highlight that the ambient pressure changes the number of intense impact pressures and their amplitudes. For low ambient pressures, the re-evolved bubble elongating toward the wall extends to the surface and breaks into segments. The impact pressure of the wall-attached part of the re-evolved bubble is up to 70% higher than that of the first bubble collapse. Increasing the ambient pressure shifts the collapse of the re-evolved bubble away from the wall while amplifying the impact pressure by the re-entrant jet. Analyzing the flow energy indicates that raising the ambient pressure reduces the amount of extracted kinetic energy. The simulations show that placing bubbles in tandem significantly reduces the amplitude of the impact pressures. The energetic impact pressure responds non-linearly to the relative distance between bubbles, which is shown to be due to changes in the collapse location and the shock wave superposition.
- Open Access
- 1 November 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (11)
Laser-induced, single droplet fragmentation dynamics revealed through megahertz x-ray microscopy
The fragmentation dynamics of single water droplets from laser irradiation is studied with megahertz frame rate x-ray microscopy. Owed to the nearly refraction-free and penetrating imaging technique, we could look into the interior of the droplet and reveal that two mechanisms are responsible for the initial explosive fragmentation of the droplet. First, reflection and diffraction of the laser beam at the droplet interface result in the formation of laser ray caustics that lead to non-homogeneous heating of the droplet, locally above the critical temperature. Second, homogeneous cavitation in the droplet that is likely caused from shockwaves reflected as tension waves at the acoustic soft boundaries of the droplet. Further atomization occurs in three stages, first a fine sub-micrometer sized mist forms on the side of the droplet posterior to laser incidence, then micrometer sized droplets are expelled from the rim of an expanding liquid sheet, and finally into droplets of larger size through hole and ligament formation in the thinning liquid sheet where ligaments pinch off.
- 1 November 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (11)
Open AccessLaser-induced, single droplet fragmentation dynamics revealed through megahertz x-ray microscopy
The fragmentation dynamics of single water droplets from laser irradiation is studied with megahertz frame rate x-ray microscopy. Owed to the nearly refraction-free and penetrating imaging technique, we could look into the interior of the droplet and reveal that two mechanisms are responsible for the initial explosive fragmentation of the droplet. First, reflection and diffraction of the laser beam at the droplet interface result in the formation of laser ray caustics that lead to non-homogeneous heating of the droplet, locally above the critical temperature. Second, homogeneous cavitation in the droplet that is likely caused from shockwaves reflected as tension waves at the acoustic soft boundaries of the droplet. Further atomization occurs in three stages, first a fine sub-micrometer sized mist forms on the side of the droplet posterior to laser incidence, then micrometer sized droplets are expelled from the rim of an expanding liquid sheet, and finally into droplets of larger size through hole and ligament formation in the thinning liquid sheet where ligaments pinch off.
- Open Access
- 26 May 2023
- Published by Springer Nature in Research Square
Megahertz X-ray multi-projection imaging
X-ray time-resolved tomography is one of the most popular X-ray techniques to probe dynamics in three dimensions (3D). Recent developments in time-resolved tomography opened the possibility of recording kilohertz-rate 3D movies. However, tomography requires rotating the sample with respect to the X-ray beam, which prevents characterization of faster structural dynamics. Here, we present megahertz (MHz) X-ray multi-projection imaging (MHz-XMPI), a technique capable of recording volumetric information at MHz rates and micrometer resolution without scanning the sample. We achieved this by harnessing the unique megahertz pulse structure and intensity of the European X-ray Free-electron Laser with a combination of novel detection and reconstruction approaches that do not require sample rotations. Our approach enables generating multiple X-ray probes that simultaneously record several angular projections for each pulse in the megahertz pulse burst. We provide a proof-of-concept demonstration of the MHz-XMPI technique's capability to probe 4D (3D+time) information on stochastic phenomena and non-reproducible processes three orders of magnitude faster than state-of-the-art time-resolved X-ray tomography, by generating 3D movies of binary droplet collisions. We anticipate that MHz-XMPI will enable in-situ and operando studies that were impossible before, either due to the lack of temporal resolution or because the systems were opaque (such as for MHz imaging based on optical microscopy)
- 26 May 2023
- Published by Springer Nature in Research Square
Open AccessMegahertz X-ray multi-projection imaging
X-ray time-resolved tomography is one of the most popular X-ray techniques to probe dynamics in three dimensions (3D). Recent developments in time-resolved tomography opened the possibility of recording kilohertz-rate 3D movies. However, tomography requires rotating the sample with respect to the X-ray beam, which prevents characterization of faster structural dynamics. Here, we present megahertz (MHz) X-ray multi-projection imaging (MHz-XMPI), a technique capable of recording volumetric information at MHz rates and micrometer resolution without scanning the sample. We achieved this by harnessing the unique megahertz pulse structure and intensity of the European X-ray Free-electron Laser with a combination of novel detection and reconstruction approaches that do not require sample rotations. Our approach enables generating multiple X-ray probes that simultaneously record several angular projections for each pulse in the megahertz pulse burst. We provide a proof-of-concept demonstration of the MHz-XMPI technique's capability to probe 4D (3D+time) information on stochastic phenomena and non-reproducible processes three orders of magnitude faster than state-of-the-art time-resolved X-ray tomography, by generating 3D movies of binary droplet collisions. We anticipate that MHz-XMPI will enable in-situ and operando studies that were impossible before, either due to the lack of temporal resolution or because the systems were opaque (such as for MHz imaging based on optical microscopy)
- Open Access
- 16 May 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (11) , 18399-18406
Hard X-ray stereographic microscopy for single-shot differential phase imaging
The characterisation of fast phenomena at the microscopic scale is required for the understanding of catastrophic responses of materials to loads and shocks, the processing of materials by optical or mechanical means, the processes involved in many key technologies such as additive manufacturing and microfluidics, and the mixing of fuels in combustion. Such processes are usually stochastic in nature and occur within the opaque interior volumes of materials or samples, with complex dynamics that evolve in all three dimensions at speeds exceeding many meters per second. There is therefore a need for the ability to record three-dimensional X-ray movies of irreversible processes with resolutions of micrometers and frame rates of microseconds. Here we demonstrate a method to achieve this by recording a stereo phase-contrast image pair in a single exposure. The two images are combined computationally to reconstruct a 3D model of the object. The method is extendable to more than two simultaneous views. When combined with megahertz pulse trains of X-ray free-electron lasers (XFELs) it will be possible to create movies able to resolve 3D trajectories with velocities of kilometers per second.
- 16 May 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (11) , 18399-18406
Open AccessHard X-ray stereographic microscopy for single-shot differential phase imaging
The characterisation of fast phenomena at the microscopic scale is required for the understanding of catastrophic responses of materials to loads and shocks, the processing of materials by optical or mechanical means, the processes involved in many key technologies such as additive manufacturing and microfluidics, and the mixing of fuels in combustion. Such processes are usually stochastic in nature and occur within the opaque interior volumes of materials or samples, with complex dynamics that evolve in all three dimensions at speeds exceeding many meters per second. There is therefore a need for the ability to record three-dimensional X-ray movies of irreversible processes with resolutions of micrometers and frame rates of microseconds. Here we demonstrate a method to achieve this by recording a stereo phase-contrast image pair in a single exposure. The two images are combined computationally to reconstruct a 3D model of the object. The method is extendable to more than two simultaneous views. When combined with megahertz pulse trains of X-ray free-electron lasers (XFELs) it will be possible to create movies able to resolve 3D trajectories with velocities of kilometers per second.