Mirza Mohammed Shah
Research Subjects
Research Interests
Latest Publications
- 23 September 2026
- Published by Wiley in Heat Transfer
Prediction of Heat Transfer During Condensation of Zeotropic Mixtures in Channels
Mixtures of two or more components are used in many industries, including refrigeration, chemical, and petroleum. In recent years, the use of mixtures as refrigerants has increased drastically to replace refrigerants that harm the environment. It is therefore important to be able to accurately predict heat transfer during their condensation. Many correlations have been published, which showed good agreement with data for condensation of pure fluids from many sources, but were verified only with a limited amount of data for mixtures. The present study was undertaken to evaluate them for mixtures. Efforts were made to collect a wide range of data in round tubes and rectangular channels. The data included 43 mixtures from 26 studies, with glide up to 34.6 K. The mixture components included refrigerants, chemicals, and carbon dioxide. Flow orientations were horizontal, vertical down, and vertical upflows. The data were compared to 14 correlations. Their predictions were corrected for mass transfer effects using the Bell and Ghaly correction factor. Results with the correlations are presented and discussed. Recommendations are made about the choice of correlations in design. The effectiveness of the Bell–Ghaly method is evaluated. The effects of the surface tension and the boundary between mini and macro channels are investigated.
- 23 September 2026
- Published by Wiley in Heat Transfer
Prediction of Heat Transfer During Condensation of Zeotropic Mixtures in Channels
Mixtures of two or more components are used in many industries, including refrigeration, chemical, and petroleum. In recent years, the use of mixtures as refrigerants has increased drastically to replace refrigerants that harm the environment. It is therefore important to be able to accurately predict heat transfer during their condensation. Many correlations have been published, which showed good agreement with data for condensation of pure fluids from many sources, but were verified only with a limited amount of data for mixtures. The present study was undertaken to evaluate them for mixtures. Efforts were made to collect a wide range of data in round tubes and rectangular channels. The data included 43 mixtures from 26 studies, with glide up to 34.6 K. The mixture components included refrigerants, chemicals, and carbon dioxide. Flow orientations were horizontal, vertical down, and vertical upflows. The data were compared to 14 correlations. Their predictions were corrected for mass transfer effects using the Bell and Ghaly correction factor. Results with the correlations are presented and discussed. Recommendations are made about the choice of correlations in design. The effectiveness of the Bell–Ghaly method is evaluated. The effects of the surface tension and the boundary between mini and macro channels are investigated.
- 16 September 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 234, 740-752
Unified model for evaporation of liquids into air from horizontal surfaces
- 16 September 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 234, 740-752
Unified model for evaporation of liquids into air from horizontal surfaces
- 12 April 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 229, 435-446
Calculation of evaporation of chemicals into air: Further development
- 12 April 2026
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 229, 435-446
Calculation of evaporation of chemicals into air: Further development
- 27 May 2025
- Published by Elsevier in Chemical Engineering Science
- Vol. 316
Calculation of evaporation of chemicals into air
- 27 May 2025
- Published by Elsevier in Chemical Engineering Science
- Vol. 316
Calculation of evaporation of chemicals into air
- Open Access
- 3 December 2024
- Published by MDPI AG in Journal of Experimental and Theoretical Analyses
- Vol. 2 (4) , 134-151
Prediction of Heat Transfer During Condensation in Annuli
Many applications involve condensation in annuli; therefore, accurate prediction of heat transfer is important. While there have been a large number of experimental studies on condensation in tubes and several well-verified correlations are available for them, there have been very few experimental studies on annuli, and no well-verified correlation is available for prediction of heat transfer during condensation in annuli. This research was done to identify reliable correlations for this purpose and to develop a new one if needed. Literature was surveyed to identify experimental studies, test data, and predictive methods. Test data was compared to general correlations which have had considerable verification with data for condensation in channels. None of them was found fully satisfactory. A new correlation was developed by modifying the present author’s published correlation for condensation in tubes. It gives a MAD of 19.2% with available data from eight sources. Deviations of other correlations were much higher. The occurrence of surface tension effects and mini/macro channel boundary are investigated. The results of this research are presented and discussed.
- 3 December 2024
- Published by MDPI AG in Journal of Experimental and Theoretical Analyses
- Vol. 2 (4) , 134-151
Open AccessPrediction of Heat Transfer During Condensation in Annuli
Many applications involve condensation in annuli; therefore, accurate prediction of heat transfer is important. While there have been a large number of experimental studies on condensation in tubes and several well-verified correlations are available for them, there have been very few experimental studies on annuli, and no well-verified correlation is available for prediction of heat transfer during condensation in annuli. This research was done to identify reliable correlations for this purpose and to develop a new one if needed. Literature was surveyed to identify experimental studies, test data, and predictive methods. Test data was compared to general correlations which have had considerable verification with data for condensation in channels. None of them was found fully satisfactory. A new correlation was developed by modifying the present author’s published correlation for condensation in tubes. It gives a MAD of 19.2% with available data from eight sources. Deviations of other correlations were much higher. The occurrence of surface tension effects and mini/macro channel boundary are investigated. The results of this research are presented and discussed.
- Open Access
Prediction of Heat Transfer during Condensation of Ammonia Inside Tubes and Annuli
Ammonia has been used as a refrigerant since the beginning of the refrigeration industry and it continues to be an important industrial refrigerant. However, there is no well-verified method for predicting heat transfer during condensation in tubes and annuli. Available information is often contradictory, especially about the effect of oil. In this paper, available test data and predictive methods are reviewed. Reliable test data are identified and compared to well-known general correlations. The effect of oil on heat transfer is investigated. The results of this research are presented, and recommendations are made for design calculations.
Open AccessPrediction of Heat Transfer during Condensation of Ammonia Inside Tubes and Annuli
Ammonia has been used as a refrigerant since the beginning of the refrigeration industry and it continues to be an important industrial refrigerant. However, there is no well-verified method for predicting heat transfer during condensation in tubes and annuli. Available information is often contradictory, especially about the effect of oil. In this paper, available test data and predictive methods are reviewed. Reliable test data are identified and compared to well-known general correlations. The effect of oil on heat transfer is investigated. The results of this research are presented, and recommendations are made for design calculations.
- 23 April 2024
- Published by ASME International in Journal of Thermal Science and Engineering Applications
- Vol. 16 (7)
Prediction of Critical Heat Flux in Tube Bundles With Crossflow
Evaporators and boilers with flow across horizontal tube bundles are widely used in industries including refrigeration and chemical processing. As yet there is a lack of a well-verified correlation for predicting local or average CHF (critical heat flux) in such bundles. The available data and correlations are reviewed. The available methods for predicting bundle mean CHF were found to be too conservative. More realistic values of bundle average CHF are proposed based on published test data. The author's well-verified correlations for CHF on a single tube with the subcooled and saturated flow at zero quality across it are compared with test data for tubes in tube bundles together with other correlations. The author's correlations agree well with all data while the others fail for data other than their own. The results of the comparison are presented and discussed. The needs for further research are identified.
- 23 April 2024
- Published by ASME International in Journal of Thermal Science and Engineering Applications
- Vol. 16 (7)
Prediction of Critical Heat Flux in Tube Bundles With Crossflow
Evaporators and boilers with flow across horizontal tube bundles are widely used in industries including refrigeration and chemical processing. As yet there is a lack of a well-verified correlation for predicting local or average CHF (critical heat flux) in such bundles. The available data and correlations are reviewed. The available methods for predicting bundle mean CHF were found to be too conservative. More realistic values of bundle average CHF are proposed based on published test data. The author's well-verified correlations for CHF on a single tube with the subcooled and saturated flow at zero quality across it are compared with test data for tubes in tube bundles together with other correlations. The author's correlations agree well with all data while the others fail for data other than their own. The results of the comparison are presented and discussed. The needs for further research are identified.
- Open Access
An Evaluation of Correlations for Predicting the Heat Transfer Coefficient during the Condensation of Saturated and Superheated Vapors Inside Channels
Condensation heat transfer is involved in many industrial applications. Therefore, it is important to know the relative accuracy of the available methods for predicting heat transfer. Condensation can occur with saturated as well as superheated vapors. Predictive methods for both conditions were evaluated using a wide range of data. Twelve well-known correlations for the condensation of saturated vapor, including the most recent ones, were compared with data for 51 pure fluids and mixtures from 132 sources in horizontal and vertical channels of many shapes. Channel hydraulic diameters were 0.08–49 mm, the mass flux was 1.1–1400 kg/m2s, and the reduced pressure range was 0.0006–0.949. The fluids included water, CO2, ammonia, hydrocarbons, halocarbon refrigerants, various chemicals, and heat transfer fluids. The best predictive technique was identified. The three most commonly used models for heat transfer during the condensation of superheated vapors were studied. They were first compared with test data using measured saturated condensation and forced convection heat transfer coefficients to select the best model. The selected model was then compared with test data using various correlations for heat transfer coefficients needed in the model. The best correlations to use in the model were identified. The results of this research are presented, as are recommendations for use in design.
Open AccessAn Evaluation of Correlations for Predicting the Heat Transfer Coefficient during the Condensation of Saturated and Superheated Vapors Inside Channels
Condensation heat transfer is involved in many industrial applications. Therefore, it is important to know the relative accuracy of the available methods for predicting heat transfer. Condensation can occur with saturated as well as superheated vapors. Predictive methods for both conditions were evaluated using a wide range of data. Twelve well-known correlations for the condensation of saturated vapor, including the most recent ones, were compared with data for 51 pure fluids and mixtures from 132 sources in horizontal and vertical channels of many shapes. Channel hydraulic diameters were 0.08–49 mm, the mass flux was 1.1–1400 kg/m2s, and the reduced pressure range was 0.0006–0.949. The fluids included water, CO2, ammonia, hydrocarbons, halocarbon refrigerants, various chemicals, and heat transfer fluids. The best predictive technique was identified. The three most commonly used models for heat transfer during the condensation of superheated vapors were studied. They were first compared with test data using measured saturated condensation and forced convection heat transfer coefficients to select the best model. The selected model was then compared with test data using various correlations for heat transfer coefficients needed in the model. The best correlations to use in the model were identified. The results of this research are presented, as are recommendations for use in design.
- 29 March 2024
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 226
Improved correlation for CHF in partially and fully heated channels
- 29 March 2024
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 226
Improved correlation for CHF in partially and fully heated channels
- Open Access
Prediction of Critical Heat Flux during Downflow in Fully Heated Vertical Channels
Boiling with downflow in vertical channels is involved in many applications such as boilers, nuclear reactors, chemical processing, etc. Accurate prediction of CHF (Critical Heat Flux) is important to ensure their safe design. While numerous experimental studies have been done on CHF during upflow and reliable methods for predicting it have been developed, there have been only a few experimental studies on CHF during downflow. Some researchers have reported no difference in CHF between up- and downflow, while some have reported that CHF in downflow is lower or higher than that in upflow. Only a few correlations have been published that are stated to be applicable to CHF during downflow. No comprehensive comparison of correlations with test data has been published. In the present research, literature on CHF during downflow in fully heated channels was reviewed. A database for CHF in downflow was compiled. The data included round tubes and rectangular channels, hydraulic diameters 2.4 mm to 15.9 mm, reduced pressure 0.0045 to 0.6251, flow rates from 15 to 21,761 kg/m2s, and several fluids with diverse properties (water, nitrogen, refrigerants). This database was compared to a number of correlations for upflow and downflow CHF. The results of this comparison are presented and discussed. Design recommendations are provided.
Open AccessPrediction of Critical Heat Flux during Downflow in Fully Heated Vertical Channels
Boiling with downflow in vertical channels is involved in many applications such as boilers, nuclear reactors, chemical processing, etc. Accurate prediction of CHF (Critical Heat Flux) is important to ensure their safe design. While numerous experimental studies have been done on CHF during upflow and reliable methods for predicting it have been developed, there have been only a few experimental studies on CHF during downflow. Some researchers have reported no difference in CHF between up- and downflow, while some have reported that CHF in downflow is lower or higher than that in upflow. Only a few correlations have been published that are stated to be applicable to CHF during downflow. No comprehensive comparison of correlations with test data has been published. In the present research, literature on CHF during downflow in fully heated channels was reviewed. A database for CHF in downflow was compiled. The data included round tubes and rectangular channels, hydraulic diameters 2.4 mm to 15.9 mm, reduced pressure 0.0045 to 0.6251, flow rates from 15 to 21,761 kg/m2s, and several fluids with diverse properties (water, nitrogen, refrigerants). This database was compared to a number of correlations for upflow and downflow CHF. The results of this comparison are presented and discussed. Design recommendations are provided.