JZJianyu Zhou

Jianyu Zhou

*This is an algorithmically generated author record based on publicly available information.

Jianyu Zhou has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A smart triboelectric nanogenerator with tunable rheological and electrical performance for self-powered multi-sensors

    by Sheng Wang, Fang Yuan, Shuai Liu, Jianyu Zhou, Shouhu Xuan, Yu Wang, Xinglong Gong

    A smart magnetorheological elastomer (MRE)-based triboelectric nanogenerator (TENG) with tunable electric–mechanical performance has been developed by assembling MREs, Cu foil and metal wires. The MRE polymer, composed of carbonyl iron and a shear stiffening elastomer matrix, shows a high response to a magnetic field, and the MR effect is 114.68% with a maximum storage modulus of 0.77 MPa. The TENG presents a positive triboelectric performance (PTP) with an increase in the loading pressure. It generates a maximum power of 55.07 μW with a voltage of 20.99 V and lights up 39 LEDs, which proves the high mechanical energy-harvesting properties. More interestingly, the TENG shows a negative triboelectric performance (NTP) under the excitation of a magnetic field owing to the high MR effect and saturated magnetization value of 147.51 emu g−1. Therefore, the overall triboelectric properties of the TENG can be precisely manipulated by alternating the external multi-fields. In addition, the intelligent TENG, with a fast response and high flexibility, functions as a portable self-powered sensor to monitor human motion, distinguish various contact materials, and perceive external magnetic fields. To this end, this work opens up a new avenue to develop a smart TENG device with tunable rheological and triboelectric properties and the self-powered wearable sensor could detect complex multi-field circumstances, which proves it has promising applications in smart energy generation systems and wearable multi-sensing electronics.


  • A customized instrument with laser interferometry for measuring electrospun mat thickness

    by Jianyu Zhou, O. Steven Roberts, Samuel M. Goldwasser, Xia Lei, Sreevalli Bokka, George G. Chase

    Thickness is an important characteristic parameter of electrospun submicron of fiber mats and membranes. The thickness of the mats directly influences performance properties such as permeability and is necessary when determining volumetric parameters such as porosity. Typical electrospun mats are very thin (less than 1 mm) and highly compressive due to the small diameter fibers, both of which make accurate measurements difficult when using conventional methods. An accurate measure of the thickness is desired for characterizing and comparing membrane performances. In this work, a thickness measurement instrument using laser interferometry has been designed to measure electrospun fiber mat thickness. A small disk is used to apply a small (reproducible) force applied across a reasonably small area of the fiber mat. A traversing pin moves to contact the disk and completes an electrical circuit to stop movement and determine the location of the disk relative to a reference plane. The fiber mat thickness is determined by measuring the difference in locations of the disk with and without the fiber mat between the disk and the reference plane. The prototype is simple to operate and user-friendly. Precision and accuracy of the prototype are discussed.


  • Open Access

    Thermomechanical Characterization of SiC/SiC Ceramic Matrix Composites in a Combustion Facility

    by Ragav P. Panakarajupally, Michael J. Presby, K. Manigandan, Jianyu Zhou, George G. Chase, Gregory N. Morscher

    A combustion facility which includes uniaxial mechanical loading was implemented that enables environmental conditions more akin to jet engine environments compared to conventional static environment tests. Two types of woven SiC/SiC ceramic matrix composites (CMCs), melt-infiltrated (MI) and chemical vapor infiltrated (CVI), were subjected to fatigue loading in the combustion facility and under isothermal furnace conditions. Some CVI test coupons were coated with a multilayer environmental barrier coating (EBC) of mullite + ytterbium monosilicate using slurry infiltration process to demonstrate the performance with a coating. Combustion conditions were applied using a high velocity oxy fuel gun on the front side of the specimen and mechanical loading was applied using a horizontal hydraulic MTS machine. All the specimens considered were subjected to tension-tension fatigue loading at 100 MPa, stress ratio of 0.1 and specimen front-side surface temperature of 1200 ± 20 °C. Nondestructive evaluation (NDE) methods, such as electrical resistance (ER), was used as an in-situ health monitoring technique. Similar fatigue tests were performed in an isothermal furnace for comparison. A much lower fatigue life was observed for the uncoated specimens tested under combustion conditions in comparison to isothermal furnace condition. This difference in fatigue life was attributed to damage associated with added thermal stress due to the thermal gradient and higher rate of oxidative embrittlement due to the presence of high velocity combustion gases in the combustion environment. EBC coating increased the fatigue life in combustion environment. However, EBC coated specimens experienced spallation in the high-velocity flame due to the presence of micro cracks in the coating surface. Fracture surfaces of the failed specimens were investigated under the scanning electron microscope (SEM) to determine the extent of oxidation and damage.