Tauheed Mohammad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tauheed Mohammad has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
Viresh Dutta
Department of Energy Science and Engineering, Indian Institute of Technology Delhi, New Delhi 110016, India
12 shared publications- Vinod Kumar
Dambi Dollo University
6 shared publications Charu Dwivedi
3 shared publications- Aditya Sadhanala
Centre for Nano Science and Engineering (CeNSE
2 shared publications - Vishal Bharti
CSIR-National Physical Laboratory
2 shared publications - Anil Kanwat
Nanyang Technological University X-Frontier Block, Level 5, 50 Nanyang Drive
1 shared publication
Latest Publications
- Open Access
- 12 August 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (33) , 30428-30440
A Versatile Top-Down Patterning Technique for Perovskite On-Chip Integration
Metal-halide perovskites (MHPs) have exciting optoelectronic properties and are under investigation for various applications, such as photovoltaics, light-emitting diodes, and lasers. An essential step toward exploiting the full potential of this class of materials is their large-scale, on-chip integration with high-resolution, top-down patterning. The development of such patterning methods for perovskite films is challenging because of their intrinsic ionic nature and adverse reactions with the solvents used in standard lithography processes. Here, we introduce a versatile and precise method comprising photolithography and reactive ion etching (RIE) processes that can be tuned to accommodate different perovskite compositions and morphologies. Our method utilizes conventional photoresists at reduced temperatures to create micron-sized features down to 1 μm, providing high reproducibility from chip to chip. The patterning technique is validated through atomic force microscopy (AFM), X-ray diffraction (XRD), optical spectroscopy, and scanning electron microscopy (SEM). It enables the scalable and high-throughput on-chip monolithic integration of MHPs.
- 12 August 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (33) , 30428-30440
Open AccessA Versatile Top-Down Patterning Technique for Perovskite On-Chip Integration
Metal-halide perovskites (MHPs) have exciting optoelectronic properties and are under investigation for various applications, such as photovoltaics, light-emitting diodes, and lasers. An essential step toward exploiting the full potential of this class of materials is their large-scale, on-chip integration with high-resolution, top-down patterning. The development of such patterning methods for perovskite films is challenging because of their intrinsic ionic nature and adverse reactions with the solvents used in standard lithography processes. Here, we introduce a versatile and precise method comprising photolithography and reactive ion etching (RIE) processes that can be tuned to accommodate different perovskite compositions and morphologies. Our method utilizes conventional photoresists at reduced temperatures to create micron-sized features down to 1 μm, providing high reproducibility from chip to chip. The patterning technique is validated through atomic force microscopy (AFM), X-ray diffraction (XRD), optical spectroscopy, and scanning electron microscopy (SEM). It enables the scalable and high-throughput on-chip monolithic integration of MHPs.
- 7 April 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (5) , 2193-2202
Lead-Free Cs3Bi2I9 Perovskite Memristors for Energy-Efficient Neuromorphic Computing
- 7 April 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (5) , 2193-2202
Lead-Free Cs3Bi2I9 Perovskite Memristors for Energy-Efficient Neuromorphic Computing
- Open Access
- 27 October 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (44) , 39690-39696
Tin Sulfide (SnS) Films Deposited by an Electric Field-Assisted Continuous Spray Pyrolysis Technique with Application as Counter Electrodes in Dye-Sensitized Solar Cells
The deposition of tin sulfide (SnS) nanostructured films using a continuous spray pyrolysis technique is reported with an electric field present at the nozzle for influencing the atomization and the subsequent film deposition. In the absence of the electric field, the X-ray diffraction pattern shows the orthorhombic phase of SnS with a crystallographic preferred orientation along the (040) plane. The application of the electric field results in significant improvement in the morphology and a reduction in surface roughness (28 nm from 37 nm). The direct optical band gap of the films deposited with and without the electric field is estimated to be 1.5 and 1.7 eV, respectively. The photothermal deflection spectroscopy studies show a lower energetic disorder (no Urbach tail), which indicates an annealing effect in the SnS films deposited under the electric field. The improvement in the film properties is reflected in the expected improvement in the power conversion efficiency (PCE) of dye-sensitized solar cells fabricated using the SnS film as a counter electrode. An enhancement of PCE from 2.07% for the film deposited without the electric field to 2.89% for the film deposited with the electric field shows the role of the electric field in the fabrication of improved SnS films.
- 27 October 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (44) , 39690-39696
Open AccessTin Sulfide (SnS) Films Deposited by an Electric Field-Assisted Continuous Spray Pyrolysis Technique with Application as Counter Electrodes in Dye-Sensitized Solar Cells
The deposition of tin sulfide (SnS) nanostructured films using a continuous spray pyrolysis technique is reported with an electric field present at the nozzle for influencing the atomization and the subsequent film deposition. In the absence of the electric field, the X-ray diffraction pattern shows the orthorhombic phase of SnS with a crystallographic preferred orientation along the (040) plane. The application of the electric field results in significant improvement in the morphology and a reduction in surface roughness (28 nm from 37 nm). The direct optical band gap of the films deposited with and without the electric field is estimated to be 1.5 and 1.7 eV, respectively. The photothermal deflection spectroscopy studies show a lower energetic disorder (no Urbach tail), which indicates an annealing effect in the SnS films deposited under the electric field. The improvement in the film properties is reflected in the expected improvement in the power conversion efficiency (PCE) of dye-sensitized solar cells fabricated using the SnS film as a counter electrode. An enhancement of PCE from 2.07% for the film deposited without the electric field to 2.89% for the film deposited with the electric field shows the role of the electric field in the fabrication of improved SnS films.
- 1 October 2020
- Published by Elsevier in Solar Energy
- Vol. 209, 379-386
Förster resonance energy transfer in organic photovoltaics devices fabricated by electric field assisted spray technique
- 1 October 2020
- Published by Elsevier in Solar Energy
- Vol. 209, 379-386
Förster resonance energy transfer in organic photovoltaics devices fabricated by electric field assisted spray technique
- 1 March 2020
- Published by Elsevier in Physica E: Low-dimensional Systems and Nanostructures
- Vol. 117
Spray deposited indium doped tin oxide thin films for organic solar cell application
- 1 March 2020
- Published by Elsevier in Physica E: Low-dimensional Systems and Nanostructures
- Vol. 117
Spray deposited indium doped tin oxide thin films for organic solar cell application
- 5 July 2019
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 30 (14) , 13567-13575
Electric-field assisted spray technique for controlled pore filling of nanostructured films: device applications
- 5 July 2019
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 30 (14) , 13567-13575
Electric-field assisted spray technique for controlled pore filling of nanostructured films: device applications
- 1 April 2019
- Published by Elsevier in Solar Energy
- Vol. 182, 72-79
Electric field assisted spray coated lead free bismuth iodide perovskite thin film for solar cell application
- 1 April 2019
- Published by Elsevier in Solar Energy
- Vol. 182, 72-79
Electric field assisted spray coated lead free bismuth iodide perovskite thin film for solar cell application
- 22 March 2019
- Published by AIP Publishing
- Vol. 2082 (1) , 050012
Effect of substrate temperature on spray coated PEDOT:PSS thin film morphology for organic solar cell
The effect of substrate temperature on the spray coated poly (3,4ethylenedioxythiophene): poly (styrenesulfonic acid) (PEDOT: PSS) hole transport layer (HTL) is explored in terms of morphological, electrical and photovoltaic characterization. The substrate temperature is varied in three steps 100, 150 and 200°C during the spray deposition of PEDOT: PSS thin film layer. Scanning electron microscopy (SEM) and optical microscopy images reveal that for the substrate temperatures of 100°C and 150°C, the morphology of PEDOT: PSS layer is improved and further increasing the temperature to 200°C, voids and cracks are formed in the films. These voids and cracks influence the conductivity of PEDOT: PSS layer which reduces from 4.7 for 150°C to 3.9 S/cm for 200°C. Organic solar cells (OSCs) using PTB7:PC71BM absorber layer on the spray coated PEDOT:PSS HTL show an efficiency increase from 2.34 for 100°C to 2.88% for 150°C and then decrease to 1.88% for 200°C.
- 22 March 2019
- Published by AIP Publishing
- Vol. 2082 (1) , 050012
Effect of substrate temperature on spray coated PEDOT:PSS thin film morphology for organic solar cell
The effect of substrate temperature on the spray coated poly (3,4ethylenedioxythiophene): poly (styrenesulfonic acid) (PEDOT: PSS) hole transport layer (HTL) is explored in terms of morphological, electrical and photovoltaic characterization. The substrate temperature is varied in three steps 100, 150 and 200°C during the spray deposition of PEDOT: PSS thin film layer. Scanning electron microscopy (SEM) and optical microscopy images reveal that for the substrate temperatures of 100°C and 150°C, the morphology of PEDOT: PSS layer is improved and further increasing the temperature to 200°C, voids and cracks are formed in the films. These voids and cracks influence the conductivity of PEDOT: PSS layer which reduces from 4.7 for 150°C to 3.9 S/cm for 200°C. Organic solar cells (OSCs) using PTB7:PC71BM absorber layer on the spray coated PEDOT:PSS HTL show an efficiency increase from 2.34 for 100°C to 2.88% for 150°C and then decrease to 1.88% for 200°C.
- 1 March 2019
- Published by Elsevier in Organic Electronics
- Vol. 66, 242-248
Spray coated europium doped PEDOT:PSS anode buffer layer for organic solar cell: The role of electric field during deposition
- 1 March 2019
- Published by Elsevier in Organic Electronics
- Vol. 66, 242-248
Spray coated europium doped PEDOT:PSS anode buffer layer for organic solar cell: The role of electric field during deposition