Francisco Duarte
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Francisco Duarte has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Adelino Ferreira
University of Coimbra
6 shared publications - Paulo Fael
C-MAST—Center for Mechanical and Aerospace Science and Technologies, Calçada Fonte do Lameiro, 6201-001 Covilha, Portugal
4 shared publications João Paulo Champalimaud
Director, Waydip, Parkurbis – Parque de Ciência e Tecnologia da Covilhã, Covilhã, Portugal
1 shared publication- João Paulo Champalimaud
Waydip, Parkurbis – Parque de Ciência e Tecnologia da Covilhã, Covilhã, Portugal
1 shared publication
Latest Publications
- 1 June 2019
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Municipal Engineer
- Vol. 172 (2) , 106-113
Waynergy vehicles: system prototype demonstration in an operational environment
This paper describes an electromechanical road pavement energy harvest system, called Waynergy Vehicles, which has been developed in Portugal by the Waydip Company in collaboration with the Pavement Mechanics Laboratory of the University of Coimbra. After testing a prototype on a road pavement on the University campus, a ten-module pilot plant was implemented on a road in Covilhã, Portugal, for demonstration in an operational environment. In 1 d, the ten-module pilot plant was able to generate a maximum of 547 230·0 J, or 152·0 Wh, with an average energy generation of 145·0 J per vehicle passing over the system.
- 1 June 2019
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Municipal Engineer
- Vol. 172 (2) , 106-113
Waynergy vehicles: system prototype demonstration in an operational environment
This paper describes an electromechanical road pavement energy harvest system, called Waynergy Vehicles, which has been developed in Portugal by the Waydip Company in collaboration with the Pavement Mechanics Laboratory of the University of Coimbra. After testing a prototype on a road pavement on the University campus, a ten-module pilot plant was implemented on a road in Covilhã, Portugal, for demonstration in an operational environment. In 1 d, the ten-module pilot plant was able to generate a maximum of 547 230·0 J, or 152·0 Wh, with an average energy generation of 145·0 J per vehicle passing over the system.
- 1 May 2018
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Energy
- Vol. 171 (2) , 82-89
Waynergy People – application in an operational environment
A new pavement energy harvest system was developed in Portugal by the Waydip Company in collaboration with the Pavement Mechanics Laboratory of the University of Coimbra. Recently, the system has been optimised and a significant improvement in energy generation has been achieved. Moreover, a 25-module pilot plant has been installed in the entrance to a shopping mall and tested. During a 4-month period it generated more than 10·7 MJ (3·0 kWh). This paper updates the earlier reports on this topic.
- 1 May 2018
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Energy
- Vol. 171 (2) , 82-89
Waynergy People – application in an operational environment
A new pavement energy harvest system was developed in Portugal by the Waydip Company in collaboration with the Pavement Mechanics Laboratory of the University of Coimbra. Recently, the system has been optimised and a significant improvement in energy generation has been achieved. Moreover, a 25-module pilot plant has been installed in the entrance to a shopping mall and tested. During a 4-month period it generated more than 10·7 MJ (3·0 kWh). This paper updates the earlier reports on this topic.
- 1 April 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Energy Engineering
- Vol. 144 (2)
Road Pavement Energy–Harvesting Device to Convert Vehicles’ Mechanical Energy into Electrical Energy
With the growing need for alternative energy sources, research into energy-harvesting technologies has increased considerably in recent years. The particular case of energy harvesting on road pavements is a very recent area of research, with different technologies having been developed in recent years. However, none of them have presented high conversion efficiencies nor technical or economic viability. This paper deals with the technical study of existing road pavement energy–harvesting solutions using electromechanical systems to transmit energy from the device surface to an electrical generator and the development of a new mechanical system to implement on such devices. The main goal is to quantify the energy harvesting, transmission, and conversion efficiency of the new system and compare it with the existing systems. Conclusions about each system’s efficiency and the maximum theoretical efficiency of the proposed system are presented.
- 1 April 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Energy Engineering
- Vol. 144 (2)
Road Pavement Energy–Harvesting Device to Convert Vehicles’ Mechanical Energy into Electrical Energy
With the growing need for alternative energy sources, research into energy-harvesting technologies has increased considerably in recent years. The particular case of energy harvesting on road pavements is a very recent area of research, with different technologies having been developed in recent years. However, none of them have presented high conversion efficiencies nor technical or economic viability. This paper deals with the technical study of existing road pavement energy–harvesting solutions using electromechanical systems to transmit energy from the device surface to an electrical generator and the development of a new mechanical system to implement on such devices. The main goal is to quantify the energy harvesting, transmission, and conversion efficiency of the new system and compare it with the existing systems. Conclusions about each system’s efficiency and the maximum theoretical efficiency of the proposed system are presented.
- 3 July 2017
- Published by Emerald Publishing in Engineering Computations
- Vol. 34 (5) , 1501-1526
Software tool for simulation of vehicle – road interaction
Purpose: This paper aims to deal with the development of a software tool to simulate and study vehicle – road interaction (VRI) to quantify the forces induced and energy released from vehicles to the road pavement, in different vehicle motion scenarios, and the energy absorbed by the road surface, speed reducers or a specific energy harvester surface or device. The software tool also enables users to quantify the energetic efficiency of the process. Design/methodology/approach: Existing software tools were analysed and its limitations were identified in terms of performing energetic analysis on the interaction between the vehicle and the road pavement elements, such as speed reducers or energy harvest devices. The software tool presented in this paper intends to overcome those limitations and precisely quantify the energy transfer. Findings: Different vehicle models and VRI models were evaluated, allowing to conclude about each model precision: bicycle car model has a 60 per cent higher precision when compared with quarter-car model, and contact patch analysis model has a 67 per cent higher precision than single force analysis model. Also, a technical study was performed for different equipment surface shapes and displacements, concluding that these variables have a great influence on the energy released by the vehicle and on the energy harvested by the equipment surface. Originality/value: The developed software tool allows to study VRI with a higher precision than existing tools, especially when energetic analyses are performed and when speed reduction or energy harvesting devices are applied on the pavement.
- 3 July 2017
- Published by Emerald Publishing in Engineering Computations
- Vol. 34 (5) , 1501-1526
Software tool for simulation of vehicle – road interaction
Purpose: This paper aims to deal with the development of a software tool to simulate and study vehicle – road interaction (VRI) to quantify the forces induced and energy released from vehicles to the road pavement, in different vehicle motion scenarios, and the energy absorbed by the road surface, speed reducers or a specific energy harvester surface or device. The software tool also enables users to quantify the energetic efficiency of the process. Design/methodology/approach: Existing software tools were analysed and its limitations were identified in terms of performing energetic analysis on the interaction between the vehicle and the road pavement elements, such as speed reducers or energy harvest devices. The software tool presented in this paper intends to overcome those limitations and precisely quantify the energy transfer. Findings: Different vehicle models and VRI models were evaluated, allowing to conclude about each model precision: bicycle car model has a 60 per cent higher precision when compared with quarter-car model, and contact patch analysis model has a 67 per cent higher precision than single force analysis model. Also, a technical study was performed for different equipment surface shapes and displacements, concluding that these variables have a great influence on the energy released by the vehicle and on the energy harvested by the equipment surface. Originality/value: The developed software tool allows to study VRI with a higher precision than existing tools, especially when energetic analyses are performed and when speed reduction or energy harvesting devices are applied on the pavement.
- 1 July 2017
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 9 (4) , 044701
Integration of a mechanical energy storage system in a road pavement energy harvesting hydraulic device with mechanical actuation
With the growing need for alternative energy sources, research into energy harvesting technologies has increased considerably in recent years. The particular case of energy harvesting on road pavements is a very recent area of research, with different technologies having been developed for this purpose. However, none of them have presented high conversion efficiency rates nor technical or economic viability. Looking at other renewable energy technologies, the inclusion of not only electrical but also in some cases mechanical energy storage units has led to an increase in global efficiency and, consequently, economic viability. This paper deals with the technical study of the integration of mechanical energy storage systems in a road pavement energy harvesting hydraulic device with mechanical actuation in order to evaluate the impact on global efficiency. The main goal is to quantify the efficiency of the energy storage and the overall efficiency of the system, including the harvesting, transmission, and conversion efficiency rate, comparing it to scenarios where no storage system is used. Finally, the conclusions on the performance of each system are presented.
- 1 July 2017
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 9 (4) , 044701
Integration of a mechanical energy storage system in a road pavement energy harvesting hydraulic device with mechanical actuation
With the growing need for alternative energy sources, research into energy harvesting technologies has increased considerably in recent years. The particular case of energy harvesting on road pavements is a very recent area of research, with different technologies having been developed for this purpose. However, none of them have presented high conversion efficiency rates nor technical or economic viability. Looking at other renewable energy technologies, the inclusion of not only electrical but also in some cases mechanical energy storage units has led to an increase in global efficiency and, consequently, economic viability. This paper deals with the technical study of the integration of mechanical energy storage systems in a road pavement energy harvesting hydraulic device with mechanical actuation in order to evaluate the impact on global efficiency. The main goal is to quantify the efficiency of the energy storage and the overall efficiency of the system, including the harvesting, transmission, and conversion efficiency rate, comparing it to scenarios where no storage system is used. Finally, the conclusions on the performance of each system are presented.
- 1 May 2017
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 9 (3) , 034701
Road pavement energy harvesting: An evaluation methodology for new and existing vehicle-derived mechanical energy collectors
Research into energy harvesting technologies has increased considerably in recent years, particularly energy harvesting on road pavements is a very recent area of research, with different technologies having been developed in recent years. However, none of these has presented high conversion efficiencies nor technical or economic viability. This paper deals with the technical study of the existing road pavement energy harvesting solutions using hydraulic systems to transmit the energy received from the device surface to an electrical generator and the development of a new system that combines mechanical and hydraulic actuation to be implemented in such devices. The main goal is to develop a systematic model to quantify the energy harvesting, transmission, and conversion efficiency of the new system and compare it to the existing systems. Conclusions about each system's efficiency and the maximum theoretical efficiency of the proposed system are presented.
- 1 May 2017
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 9 (3) , 034701
Road pavement energy harvesting: An evaluation methodology for new and existing vehicle-derived mechanical energy collectors
Research into energy harvesting technologies has increased considerably in recent years, particularly energy harvesting on road pavements is a very recent area of research, with different technologies having been developed in recent years. However, none of these has presented high conversion efficiencies nor technical or economic viability. This paper deals with the technical study of the existing road pavement energy harvesting solutions using hydraulic systems to transmit the energy received from the device surface to an electrical generator and the development of a new system that combines mechanical and hydraulic actuation to be implemented in such devices. The main goal is to develop a systematic model to quantify the energy harvesting, transmission, and conversion efficiency of the new system and compare it to the existing systems. Conclusions about each system's efficiency and the maximum theoretical efficiency of the proposed system are presented.