Kyle E. Broaders
Kyle E. Broaders has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Jean M. J. Frechet
Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States
10 shared publications Tristan T. Beaudette
College of Chemistry, University of California, Berkeley, California 94720-1460, United States and
8 shared publicationsEric M. Bachelder
College of Chemistry, University of California, Berkeley, CA 94720‐1460 (USA)
7 shared publicationsJoel A. Cohen
College of Chemistry, University of California, Berkeley, California 94720-1460, United States and
5 shared publications- Zev Jordan Gartner
Department of Pharmaceutical Chemistry, University of California, San Francisco, San Francisco, California, USA
4 shared publications Alec E. Cerchiari
University of California at Berkeley-University of California at San Francisco Graduate Program in Bioengineering, University of California, Berkeley, CA 94720; Departments of Bioengineering and Therapeutic Sciences and Pharmaceutical Chemistry, and
2 shared publications
Latest Publications
- Open Access
- 14 November 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (46) , 56025-56031
Ketal-Modified Cellulose as a Biodegradable Bioplastic
Polymeric plastic materials pervade every part of modern society. The vast majority of these plastics are petroleum-based; their production generates over 2 gigatons of CO2 equivalent annually, and their waste biodegrades extraordinarily slowly. Thus, there is an urgent need to transition away from nonrenewable nonbiodegradable plastics. Biologically derived polymers hold potential to produce plastics with drastically reduced environmental impact, during both their production and waste remediation. Cellulose esters and ethers are among the oldest successful renewable plastics, but they can suffer limitations related to their processability and degradability. We report on the homogeneous phase chemical modification of cellulose to form methoxy isopropylidine acetal-modified cellulose, MiP-Cel. Chemical and materials characterization reveals a high degree of substitution and excellent solution processability. MiP-Cel forms transparent, smooth, freestanding films, which are measured for optical clarity and hydrophobicity. Finally, the pH-dependent degradation of MiP-Cel-derived materials is assessed.
- 14 November 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (46) , 56025-56031
Open AccessKetal-Modified Cellulose as a Biodegradable Bioplastic
Polymeric plastic materials pervade every part of modern society. The vast majority of these plastics are petroleum-based; their production generates over 2 gigatons of CO2 equivalent annually, and their waste biodegrades extraordinarily slowly. Thus, there is an urgent need to transition away from nonrenewable nonbiodegradable plastics. Biologically derived polymers hold potential to produce plastics with drastically reduced environmental impact, during both their production and waste remediation. Cellulose esters and ethers are among the oldest successful renewable plastics, but they can suffer limitations related to their processability and degradability. We report on the homogeneous phase chemical modification of cellulose to form methoxy isopropylidine acetal-modified cellulose, MiP-Cel. Chemical and materials characterization reveals a high degree of substitution and excellent solution processability. MiP-Cel forms transparent, smooth, freestanding films, which are measured for optical clarity and hydrophobicity. Finally, the pH-dependent degradation of MiP-Cel-derived materials is assessed.
- 30 July 2019
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 2 (9) , 3755-3762
Oxidation-Sensitive Dextran-Based Polymer with Improved Processability through Stable Boronic Ester Groups
Particulate immunotherapy holds promise to vaccinate or treat a broad array of illnesses, including cancer, infectious diseases, and autoimmune disorders. The rate of antigen release from nano/microparticles (MPs) can impact both the type and quality of the immune response they elicit. The lysosomes of antigen-presenting cells are highly oxidizing. Thus, an oxidation-sensitive vehicle could enable a significant advancement in effective MP immunotherapy. One promising class of materials being developed toward this end is aryl-boronate-modified dextran polymers. The boronic esters used for oxidation-sensitive materials and sensors are typically made using pinacol (Pin) as a diol. However, Pin-based aryl-boronate-modified polymers are capable of transesterifying with biogenic diols, which can lead to undesirable interactions and poor material properties. To solve this, pinanediol (PD) was used in place of Pin in the synthesis of an aryl-boronate-modified dextran polymer (PDB-Dex), yielding a highly stable boronic ester. This modified dextran reverses its water solubility as desired, and improves on Pin-based materials by maintaining its solubility in organic solvents. MPs could be prepared by emulsion, nanoprecipitation, and electrospray techniques. The hydrogen peroxide-triggered degradation of microparticles was quantified colorimetrically, and the mechanism was probed using 1H NMR. Preliminary in vitro studies show low cytotoxicity and the ability to deliver an immunostimulatory agent.
- 30 July 2019
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 2 (9) , 3755-3762
Oxidation-Sensitive Dextran-Based Polymer with Improved Processability through Stable Boronic Ester Groups
Particulate immunotherapy holds promise to vaccinate or treat a broad array of illnesses, including cancer, infectious diseases, and autoimmune disorders. The rate of antigen release from nano/microparticles (MPs) can impact both the type and quality of the immune response they elicit. The lysosomes of antigen-presenting cells are highly oxidizing. Thus, an oxidation-sensitive vehicle could enable a significant advancement in effective MP immunotherapy. One promising class of materials being developed toward this end is aryl-boronate-modified dextran polymers. The boronic esters used for oxidation-sensitive materials and sensors are typically made using pinacol (Pin) as a diol. However, Pin-based aryl-boronate-modified polymers are capable of transesterifying with biogenic diols, which can lead to undesirable interactions and poor material properties. To solve this, pinanediol (PD) was used in place of Pin in the synthesis of an aryl-boronate-modified dextran polymer (PDB-Dex), yielding a highly stable boronic ester. This modified dextran reverses its water solubility as desired, and improves on Pin-based materials by maintaining its solubility in organic solvents. MPs could be prepared by emulsion, nanoprecipitation, and electrospray techniques. The hydrogen peroxide-triggered degradation of microparticles was quantified colorimetrically, and the mechanism was probed using 1H NMR. Preliminary in vitro studies show low cytotoxicity and the ability to deliver an immunostimulatory agent.
- Open Access
- 2 April 2019
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 20 (5) , 2008-2014
Spirocyclic Acetal-Modified Dextran as a Flexible pH-Sensitive Solubility-Switching Material
Bioresponsive polymers can enable the development of more effective drug delivery vehicles and medical materials. Acetal-modified polysaccharides allow pH-triggered solubility switching in a versatile and effective manner, but prior work has been limited to a combination of acyclic methoxyisopropyl (MIP) and cyclic isopropylidene acetals. We describe here the preparation and characterization of Spirocyclic Acetal-modified Dextran (SpAc-Dex), which comprises dextran decorated with cyclopentyl, cyclohexyl, or cycloheptyl acetals (SpAc5-, SpAc6-, and SpAc7-Dex respectively). A library of materials with varying acyclic and cyclic acetal content was synthesized, and organic-soluble materials were formed into microparticles and assessed for degradability and cytocompatibility. At high levels of modification SpAc5-Dex degraded most quickly and SpAc7-Dex degraded most slowly. SpAc6-Dex features lower degrees of substitution but spans a wide range of degradability. These materials
- 2 April 2019
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 20 (5) , 2008-2014
Open AccessSpirocyclic Acetal-Modified Dextran as a Flexible pH-Sensitive Solubility-Switching Material
Bioresponsive polymers can enable the development of more effective drug delivery vehicles and medical materials. Acetal-modified polysaccharides allow pH-triggered solubility switching in a versatile and effective manner, but prior work has been limited to a combination of acyclic methoxyisopropyl (MIP) and cyclic isopropylidene acetals. We describe here the preparation and characterization of Spirocyclic Acetal-modified Dextran (SpAc-Dex), which comprises dextran decorated with cyclopentyl, cyclohexyl, or cycloheptyl acetals (SpAc5-, SpAc6-, and SpAc7-Dex respectively). A library of materials with varying acyclic and cyclic acetal content was synthesized, and organic-soluble materials were formed into microparticles and assessed for degradability and cytocompatibility. At high levels of modification SpAc5-Dex degraded most quickly and SpAc7-Dex degraded most slowly. SpAc6-Dex features lower degrees of substitution but spans a wide range of degradability. These materials
- 29 January 2015
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 112 (7) , 2287-2292
A strategy for tissue self-organization that is robust to cellular heterogeneity and plasticity
Significance: Differences in cell–cell interfacial energies can explain how multiple cell types sort into spatially organized tissues. However, this strategy of self-organization is not robust to heterogeneity or changes to the interfacial energies that drive correct cell positioning. Therefore, heterogeneous epithelial tissues such as the human mammary and prostate glands use a different strategy. First, disorganized aggregates form an adhesive interface at the tissue–ECM boundary that provides geometric constraints to self-organization. Second, only one cell type interacts appreciably with this interface. This strategy can explain how self-organization remains robust in vivo, provides generalizable rules for reconstituting tissues in vitro, and suggests how structure might break down during cancer progression.
- 29 January 2015
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 112 (7) , 2287-2292
A strategy for tissue self-organization that is robust to cellular heterogeneity and plasticity
Significance: Differences in cell–cell interfacial energies can explain how multiple cell types sort into spatially organized tissues. However, this strategy of self-organization is not robust to heterogeneity or changes to the interfacial energies that drive correct cell positioning. Therefore, heterogeneous epithelial tissues such as the human mammary and prostate glands use a different strategy. First, disorganized aggregates form an adhesive interface at the tissue–ECM boundary that provides geometric constraints to self-organization. Second, only one cell type interacts appreciably with this interface. This strategy can explain how self-organization remains robust in vivo, provides generalizable rules for reconstituting tissues in vitro, and suggests how structure might break down during cancer progression.
- Open Access
- 1 January 2015
- Published by Oxford University Press (OUP) in Integrative Biology
- Vol. 7 (12) , 1611-1621
Coupling between apical tension and basal adhesion allow epithelia to collectively sense and respond to substrate topography over long distances
Epithelia have the capacity to sense and respond to substrate topography through the coupling of tensions at the cell–cell, cell–substrate, and cell–medium interfaces.
- 1 January 2015
- Published by Oxford University Press (OUP) in Integrative Biology
- Vol. 7 (12) , 1611-1621
Open AccessCoupling between apical tension and basal adhesion allow epithelia to collectively sense and respond to substrate topography over long distances
Epithelia have the capacity to sense and respond to substrate topography through the coupling of tensions at the cell–cell, cell–substrate, and cell–medium interfaces.
- Open Access
- 13 October 2013
- Published by Springer Nature in Nature Methods
- Vol. 10 (12) , 1203-1205
Formation of targeted monovalent quantum dots by steric exclusion
A simple method for preparing entirely monovalent quantum dots is described. These reagents can be targeted to protein and lipid tags and used as imaging probes in live cells. Precise control over interfacial chemistry between nanoparticles and other materials remains a major challenge that limits broad application of nanotechnology in biology. To address this challenge, we used 'steric exclusion' to completely convert commercial quantum dots (QDs) into monovalent imaging probes by wrapping each QD with a functionalized oligonucleotide. We demonstrated the utility of these QDs as modular and nonperturbing imaging probes by tracking individual Notch receptors on live cells.
- 13 October 2013
- Published by Springer Nature in Nature Methods
- Vol. 10 (12) , 1203-1205
Open AccessFormation of targeted monovalent quantum dots by steric exclusion
A simple method for preparing entirely monovalent quantum dots is described. These reagents can be targeted to protein and lipid tags and used as imaging probes in live cells. Precise control over interfacial chemistry between nanoparticles and other materials remains a major challenge that limits broad application of nanotechnology in biology. To address this challenge, we used 'steric exclusion' to completely convert commercial quantum dots (QDs) into monovalent imaging probes by wrapping each QD with a functionalized oligonucleotide. We demonstrated the utility of these QDs as modular and nonperturbing imaging probes by tracking individual Notch receptors on live cells.
- 16 December 2011
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 134 (2) , 765-768
Chemically Programmed Cell Adhesion with Membrane-Anchored Oligonucleotides
Cell adhesion organizes the structures of tissues and mediates their mechanical, chemical, and electrical integration with their surroundings. Here, we describe a strategy for chemically controlling cell adhesion using membrane-anchored single-stranded DNA oligonucleotides. The reagents are pure chemical species prepared from phosphoramidites synthesized in a single chemical step from commercially available starting materials. The approach enables rapid, efficient, and tunable cell adhesion, independent of proteins or glycans, by facilitating interactions with complementary labeled surfaces or other cells. We demonstrate the utility of this approach by imaging drug-induced changes in the membrane dynamics of non-adherent human cells that are chemically immobilized on a passivated glass surface.
- 16 December 2011
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 134 (2) , 765-768
Chemically Programmed Cell Adhesion with Membrane-Anchored Oligonucleotides
Cell adhesion organizes the structures of tissues and mediates their mechanical, chemical, and electrical integration with their surroundings. Here, we describe a strategy for chemically controlling cell adhesion using membrane-anchored single-stranded DNA oligonucleotides. The reagents are pure chemical species prepared from phosphoramidites synthesized in a single chemical step from commercially available starting materials. The approach enables rapid, efficient, and tunable cell adhesion, independent of proteins or glycans, by facilitating interactions with complementary labeled surfaces or other cells. We demonstrate the utility of this approach by imaging drug-induced changes in the membrane dynamics of non-adherent human cells that are chemically immobilized on a passivated glass surface.
- 10 April 2011
- Published by American Chemical Society (ACS) in Bioconjugate Chemistry
- Vol. 22 (5) , 949-957
Mannosylated Dextran Nanoparticles: A pH-Sensitive System Engineered for Immunomodulation through Mannose Targeting
Biotherapeutic delivery is a rapidly growing field in need of new materials that are easy to modify, are biocompatible, and provide for triggered release of their encapsulated cargo. Herein, we report on a particulate system made of a polysaccharide-based pH-sensitive material that can be efficiently modified to display mannose-based ligands of cell-surface receptors. These ligands are beneficial for antigen delivery, as they enhance internalization and activation of APCs, and are thus capable of modulating immune responses. When compared to unmodified particles or particles modified with a nonspecific sugar residue used in the delivery of antigens to dendritic cells (DCs), the mannosylated particles exhibited enhanced antigen presentation in the context of major histocompatibility complex (MHC) class I molecules. This represents the first demonstration of a mannosylated particulate system that enables enhanced MHC I antigen presentation by DCs in vitro. Our readily functionalized pH-sensitive material may also open new avenues in the development of optimally modulated vaccine delivery systems.
- 10 April 2011
- Published by American Chemical Society (ACS) in Bioconjugate Chemistry
- Vol. 22 (5) , 949-957
Mannosylated Dextran Nanoparticles: A pH-Sensitive System Engineered for Immunomodulation through Mannose Targeting
Biotherapeutic delivery is a rapidly growing field in need of new materials that are easy to modify, are biocompatible, and provide for triggered release of their encapsulated cargo. Herein, we report on a particulate system made of a polysaccharide-based pH-sensitive material that can be efficiently modified to display mannose-based ligands of cell-surface receptors. These ligands are beneficial for antigen delivery, as they enhance internalization and activation of APCs, and are thus capable of modulating immune responses. When compared to unmodified particles or particles modified with a nonspecific sugar residue used in the delivery of antigens to dendritic cells (DCs), the mannosylated particles exhibited enhanced antigen presentation in the context of major histocompatibility complex (MHC) class I molecules. This represents the first demonstration of a mannosylated particulate system that enables enhanced MHC I antigen presentation by DCs in vitro. Our readily functionalized pH-sensitive material may also open new avenues in the development of optimally modulated vaccine delivery systems.
- 20 December 2010
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 133 (4) , 756-758
A Biocompatible Oxidation-Triggered Carrier Polymer with Potential in Therapeutics
Dextran, a water-soluble, biocompatible polymer of glucose, was modified at its hydroxyls with arylboronic esters to make it soluble in common organic solvents, allowing for the facile preparation of oxidation-sensitive dextran (Oxi-DEX) carrier microparticles. These particles were found to release their payload with a half-life of 36 min at 1 mM H2O2, which can be compared with a half-life of greater than 1 week in the absence of H2O2. When used in a model vaccine application, Oxi-DEX particles loaded with ovalbumin (OVA) increased the presentation to CD8+ T-cells 27-fold relative to OVA encapsulated in a classical vehicle not sensitive to oxidation. No presentation was observed from cells incubated with unencapsulated OVA. Additionally, Oxi-DEX was found to be nontoxic in preliminary in vitro cytotoxicity assays. Because it is easy to prepare, sensitive to biological oxidation, and biocompatible, this material may represent an attractive new platform for selective delivery applications.
- 20 December 2010
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 133 (4) , 756-758
A Biocompatible Oxidation-Triggered Carrier Polymer with Potential in Therapeutics
Dextran, a water-soluble, biocompatible polymer of glucose, was modified at its hydroxyls with arylboronic esters to make it soluble in common organic solvents, allowing for the facile preparation of oxidation-sensitive dextran (Oxi-DEX) carrier microparticles. These particles were found to release their payload with a half-life of 36 min at 1 mM H2O2, which can be compared with a half-life of greater than 1 week in the absence of H2O2. When used in a model vaccine application, Oxi-DEX particles loaded with ovalbumin (OVA) increased the presentation to CD8+ T-cells 27-fold relative to OVA encapsulated in a classical vehicle not sensitive to oxidation. No presentation was observed from cells incubated with unencapsulated OVA. Additionally, Oxi-DEX was found to be nontoxic in preliminary in vitro cytotoxicity assays. Because it is easy to prepare, sensitive to biological oxidation, and biocompatible, this material may represent an attractive new platform for selective delivery applications.
- 26 November 2010
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 47 (2) , 665-667
Acid-degradable solid-walled microcapsules for pH-responsive burst-release drug delivery
Acid-degradable microcapsules were prepared via an interfacial polymerization. Degradation of the thin wall of the capsules leads to all-or-nothing cargo release. The only byproducts of degradation are acetone, and a non-toxic triamide. Proof-of-concept experiments showed that cargo can be delivered to and released in cells.
- 26 November 2010
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 47 (2) , 665-667
Acid-degradable solid-walled microcapsules for pH-responsive burst-release drug delivery
Acid-degradable microcapsules were prepared via an interfacial polymerization. Degradation of the thin wall of the capsules leads to all-or-nothing cargo release. The only byproducts of degradation are acetone, and a non-toxic triamide. Proof-of-concept experiments showed that cargo can be delivered to and released in cells.