Alessandro Saccon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alessandro Saccon has a total of 98 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Pedro Aguiar
Research Center for Systems and Technologies (SYSTEC-ARISE), Faculty of Engineering, University of Porto, Porto, Portugal
14 shared publications John Hauser
University of Colorado
14 shared publications- Antonio Pascoal
Laboratory of Robotics and Systems in Engineering and Science (LARSyS), ISR/IST, University of Lisbon, Lisbon, Portugal
6 shared publications - Henk Nijmeijer
Eindhoven University of Technology
6 shared publications - John Hauser
Department of Electrical, Computer, and Energy Engineering, University of Colorado, Boulder, CO, USA
6 shared publications Alessandro Beghi
5 shared publications
Latest Publications
- 20 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics & Automation Magazine
- Vol. PP (10709932) , 2-14
Impact-Aware Dual-Arm Manipulation: A Framework for Fast Package Handling
This article presents an impact-aware manipulation framework and its application to logistics, where the challenges related to the booming of e-commerce have increased the need for faster and more flexible package handling solutions. Particularly, the proposed impact-aware framework addresses the problem of swiftly grabbing and placing objects in depalletizing tasks with dual-arm robotic systems. Impact-aware robotics leverages intentional collisions to achieve dynamic interactions and thus has the potential to be faster and more energy efficient than the state of the art based on quasi-static interactions with objects or environments. The generation of desired impacts (contacts at a nonzero relative speed), generally avoided in classical robotics, brings multiple challenges encompassing the generation of robust motions, managing the impact with the object, dealing with the physical constraints of the robotic systems, contact state sensing, and simulation of contact behavior. To tackle these challenges, we developed, within the European Union (EU)-funded project Impact-Aware Manipulation (I.AM.), impact-aware technologies that yield an integrated impact-aware solution. The proposed framework exploits nonsmooth mechanics to provide robot‒object‒environment impact models; it uses dynamical systems (DSs) to generate nominal and contingency motions with intentional impacts; it leverages quadratic programming (QP)-based control to provide motion execution with the ability to enforce hardware and safety constraints; it employs internal state sensing that does not require an external force transducer; and, finally, it develops an impact simulation environment that can handle batch simulations. This article highlights the benefits of the proposed approach in terms of speed (a 29% decrease in average task time) and energy efficiency (a 35% decrease) through a systematic comparison between classical grabbing and impact-aware swift grabbing and tossing. In summary, our article underscores the transformative potential of impact-aware technologies in revolutionizing robotic logistics operations. An accompanying video is available at https://youtu.be/0Tv-MxO0rG0.
- 20 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics & Automation Magazine
- Vol. PP (10709932) , 2-14
Impact-Aware Dual-Arm Manipulation: A Framework for Fast Package Handling
This article presents an impact-aware manipulation framework and its application to logistics, where the challenges related to the booming of e-commerce have increased the need for faster and more flexible package handling solutions. Particularly, the proposed impact-aware framework addresses the problem of swiftly grabbing and placing objects in depalletizing tasks with dual-arm robotic systems. Impact-aware robotics leverages intentional collisions to achieve dynamic interactions and thus has the potential to be faster and more energy efficient than the state of the art based on quasi-static interactions with objects or environments. The generation of desired impacts (contacts at a nonzero relative speed), generally avoided in classical robotics, brings multiple challenges encompassing the generation of robust motions, managing the impact with the object, dealing with the physical constraints of the robotic systems, contact state sensing, and simulation of contact behavior. To tackle these challenges, we developed, within the European Union (EU)-funded project Impact-Aware Manipulation (I.AM.), impact-aware technologies that yield an integrated impact-aware solution. The proposed framework exploits nonsmooth mechanics to provide robot‒object‒environment impact models; it uses dynamical systems (DSs) to generate nominal and contingency motions with intentional impacts; it leverages quadratic programming (QP)-based control to provide motion execution with the ability to enforce hardware and safety constraints; it employs internal state sensing that does not require an external force transducer; and, finally, it develops an impact simulation environment that can handle batch simulations. This article highlights the benefits of the proposed approach in terms of speed (a 29% decrease in average task time) and energy efficiency (a 35% decrease) through a systematic comparison between classical grabbing and impact-aware swift grabbing and tossing. In summary, our article underscores the transformative potential of impact-aware technologies in revolutionizing robotic logistics operations. An accompanying video is available at https://youtu.be/0Tv-MxO0rG0.
- Open Access
- 20 October 2025
- Published by Springer Nature in Research Square
DYNAMO: Vision-Initialized Physics-Based Dynamic Motion Prediction for Object Manipulation
This paper presents DYNAMO, a pipeline combining a novel training-free vision-based 6D pose estimation with nonsmooth physics simulation to enable manipulation of a cluster of rigid objects. We assess the possibility to predict the physical outcomes of dynamic actions using approximate object inertia, friction, and geometry, derived from visual and potentially tactile inspection. To allow the onboarding of unseen objects, the training-free 6D pose estimation and shape reconstruction framework leverages foundation models for object detection, adaptive retrieval of clustered templates, image feature matching, and nonlinear optimization. Experimental results validate the accuracy of the pose estimates on the YCB-V dataset and the predictive capabilities of the vision-initialized physics engine in a dual-arm manipulation scenario. DYNAMO is envisioned to complement simulation-based plan-and-control frameworks and is seen as a first step towards robust and explainable real2simsim2real approaches for the manipulation of a cluster of objects in dynamic settings. Our source code is available at https://gitlab.tue.nl/20220548/dynamo.
- 20 October 2025
- Published by Springer Nature in Research Square
Open AccessDYNAMO: Vision-Initialized Physics-Based Dynamic Motion Prediction for Object Manipulation
This paper presents DYNAMO, a pipeline combining a novel training-free vision-based 6D pose estimation with nonsmooth physics simulation to enable manipulation of a cluster of rigid objects. We assess the possibility to predict the physical outcomes of dynamic actions using approximate object inertia, friction, and geometry, derived from visual and potentially tactile inspection. To allow the onboarding of unseen objects, the training-free 6D pose estimation and shape reconstruction framework leverages foundation models for object detection, adaptive retrieval of clustered templates, image feature matching, and nonlinear optimization. Experimental results validate the accuracy of the pose estimates on the YCB-V dataset and the predictive capabilities of the vision-initialized physics engine in a dual-arm manipulation scenario. DYNAMO is envisioned to complement simulation-based plan-and-control frameworks and is seen as a first step towards robust and explainable real2simsim2real approaches for the manipulation of a cluster of objects in dynamic settings. Our source code is available at https://gitlab.tue.nl/20220548/dynamo.
- 14 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 41 (15523098) , 2285-2300
A Compact 6D Suction Cup Model for Robotic Manipulation via Symmetry Reduction
Active suction cups are widely adopted in industrial and logistics automation. Despite that, validated dynamic models describing their 6D force/torque interaction with objects are rare. This work aims at filling this gap by showing that it is possible to employ a compact model for suction cups, providing good accuracy also for large deformations. Its potential use is for advanced manipulation, planning and control. We model the interconnected object-suction cup system as a lumped 6D massspring-damper systems, employing a potential energy function on SE(3), parametrized by a 6 × 6 stiffness matrix. By exploiting geometric symmetries of the suction cup, we reduce the parameter identification problem, from 6(6 + 1)/2 = 21 to only 5 independent parameters, greatly simplifying the parameter identification procedure, that is otherwise ill-conditioned. Experimental validation is provided and data is shared openly to further stimulate research. As an indication of the achievable pose prediction in steady state, for an object of about 1.75 kg, we obtain a pose error in the order of 5 mm and 3 deg, with a gripper inclination of 60 deg.
- 14 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 41 (15523098) , 2285-2300
A Compact 6D Suction Cup Model for Robotic Manipulation via Symmetry Reduction
Active suction cups are widely adopted in industrial and logistics automation. Despite that, validated dynamic models describing their 6D force/torque interaction with objects are rare. This work aims at filling this gap by showing that it is possible to employ a compact model for suction cups, providing good accuracy also for large deformations. Its potential use is for advanced manipulation, planning and control. We model the interconnected object-suction cup system as a lumped 6D massspring-damper systems, employing a potential energy function on SE(3), parametrized by a 6 × 6 stiffness matrix. By exploiting geometric symmetries of the suction cup, we reduce the parameter identification problem, from 6(6 + 1)/2 = 21 to only 5 independent parameters, greatly simplifying the parameter identification procedure, that is otherwise ill-conditioned. Experimental validation is provided and data is shared openly to further stimulate research. As an indication of the achievable pose prediction in steady state, for an object of about 1.75 kg, we obtain a pose error in the order of 5 mm and 3 deg, with a gripper inclination of 60 deg.
- Open Access
Impact-Aware Control using Time-Invariant Reference Spreading
With the goal of increasing the speed and efficiency in robotic manipulation, a control approach is presented that aims to utilize intentional simultaneous impacts to its advantage. This approach exploits the concept of the time-invariant reference spreading framework, in which partly-overlapping ante- and post-impact reference vector fields are used. These vector fields are coupled via an impact model in proximity of the expected impact area, minimizing the otherwise large impact-induced velocity errors and control efforts. We show how a nonsmooth physics engine can be used to construct this impact model for complex scenarios, which warrants applicability to a large range of possible impact states without requiring contact stiffness and damping parameters. In addition, a novel interim-impact control mode provides robustness in the execution against the inevitable lack of exact impact simultaneity and the corresponding unreliable velocity error during the time when contact is only partially established. This interim mode uses a position feedback signal that is derived from the ante-impact velocity reference to promote contact completion, and smoothly transitions into the post-impact mode. An experimental validation of time-invariant reference spreading control is presented for the first time through a set of 600 robotic hit-and-push and dual-arm grabbing experiments.
Open AccessImpact-Aware Control using Time-Invariant Reference Spreading
With the goal of increasing the speed and efficiency in robotic manipulation, a control approach is presented that aims to utilize intentional simultaneous impacts to its advantage. This approach exploits the concept of the time-invariant reference spreading framework, in which partly-overlapping ante- and post-impact reference vector fields are used. These vector fields are coupled via an impact model in proximity of the expected impact area, minimizing the otherwise large impact-induced velocity errors and control efforts. We show how a nonsmooth physics engine can be used to construct this impact model for complex scenarios, which warrants applicability to a large range of possible impact states without requiring contact stiffness and damping parameters. In addition, a novel interim-impact control mode provides robustness in the execution against the inevitable lack of exact impact simultaneity and the corresponding unreliable velocity error during the time when contact is only partially established. This interim mode uses a position feedback signal that is derived from the ante-impact velocity reference to promote contact completion, and smoothly transitions into the post-impact mode. An experimental validation of time-invariant reference spreading control is presented for the first time through a set of 600 robotic hit-and-push and dual-arm grabbing experiments.
- Open Access
Impact-Aware Robotic Manipulation: Quantifying the Sim-To-Real Gap for Velocity Jumps
Impact-aware robotic manipulation benefits from an accurate map from ante-impact to post-impact velocity signals to support, e.g., motion planning and control. This work proposes an approach to generate and experimentally validate such impact maps from simulations with a physics engine, allowing to model impact scenarios of arbitrarily large complexity. This impact map captures the velocity jump assuming an instantaneous contact transition between rigid objects, neglecting the nearly instantaneous contact transition and impact-induced vibrations. Feedback control, which is required for complex impact scenarios, will affect velocity signals when these vibrations are still active, making an evaluation solely based on velocity signals as in previous works unreliable. Instead, the proposed validation approach uses the reference spreading control framework, which aims to reduce peaks and jumps in the control feedback signals by using a reference consistent with the rigid impact map together with a suitable control scheme. Based on the key idea that selecting the correct rigid impact map in this reference spreading framework will minimize the net feedback signal, the rigid impact map is experimentally determined and compared with the impact map obtained from simulation, resulting in a 3.1% average error between the post-impact velocity identified from simulations and from experiments.
Open AccessImpact-Aware Robotic Manipulation: Quantifying the Sim-To-Real Gap for Velocity Jumps
Impact-aware robotic manipulation benefits from an accurate map from ante-impact to post-impact velocity signals to support, e.g., motion planning and control. This work proposes an approach to generate and experimentally validate such impact maps from simulations with a physics engine, allowing to model impact scenarios of arbitrarily large complexity. This impact map captures the velocity jump assuming an instantaneous contact transition between rigid objects, neglecting the nearly instantaneous contact transition and impact-induced vibrations. Feedback control, which is required for complex impact scenarios, will affect velocity signals when these vibrations are still active, making an evaluation solely based on velocity signals as in previous works unreliable. Instead, the proposed validation approach uses the reference spreading control framework, which aims to reduce peaks and jumps in the control feedback signals by using a reference consistent with the rigid impact map together with a suitable control scheme. Based on the key idea that selecting the correct rigid impact map in this reference spreading framework will minimize the net feedback signal, the rigid impact map is experimentally determined and compared with the impact map obtained from simulation, resulting in a 3.1% average error between the post-impact velocity identified from simulations and from experiments.
- 7 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 40 (15523098) , 4650-4669
Editorial Introduction to the IEEE T-RO Special Collection on Impact-Aware Robotics
- 7 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 40 (15523098) , 4650-4669
Editorial Introduction to the IEEE T-RO Special Collection on Impact-Aware Robotics
- 16 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 33 (1) , 343-353
Data-Based Settling-Time Optimization for Linear Feedback Control Systems Using Global Extremum Seeking
High-performance control designs are indispensable in high-end industrial applications. At the same time, tuning a controller for optimal performance only on the basis of model knowledge is generally hampered by model uncertainty, unknown disturbances, and variation in the dynamics between systems of the same make due to manufacturing tolerances. Data-driven control methods facilitate system-specific controller tuning in an automated fashion while taking these aspects into account through measured performance data. This article presents a data-based extremum-seeking approach for the optimization of transient system performance in terms of settling time. A novel cascaded global optimization approach tackles the problem that the settling time depends discontinuously on controller parameters. In addition, it ensures that the resulting controller designs have guaranteed closed-loop stability and robustness margins. The effectiveness of the proposed approach in optimizing transient system behavior is shown experimentally in an industrial case study on a wire bonder system. Herein, it is also shown how to achieve improved performance uniformly over a range of setpoint designs and for position-dependent dynamics.
- 16 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 33 (1) , 343-353
Data-Based Settling-Time Optimization for Linear Feedback Control Systems Using Global Extremum Seeking
High-performance control designs are indispensable in high-end industrial applications. At the same time, tuning a controller for optimal performance only on the basis of model knowledge is generally hampered by model uncertainty, unknown disturbances, and variation in the dynamics between systems of the same make due to manufacturing tolerances. Data-driven control methods facilitate system-specific controller tuning in an automated fashion while taking these aspects into account through measured performance data. This article presents a data-based extremum-seeking approach for the optimization of transient system performance in terms of settling time. A novel cascaded global optimization approach tackles the problem that the settling time depends discontinuously on controller parameters. In addition, it ensures that the resulting controller designs have guaranteed closed-loop stability and robustness margins. The effectiveness of the proposed approach in optimizing transient system behavior is shown experimentally in an industrial case study on a wire bonder system. Herein, it is also shown how to achieve improved performance uniformly over a range of setpoint designs and for position-dependent dynamics.
- Open Access
- 21 September 2024
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 203
Dynamic inversion and optimal tracking control on the ball-plate system based on a linearized nonholonomic multibody model
- 21 September 2024
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 203
Open AccessDynamic inversion and optimal tracking control on the ball-plate system based on a linearized nonholonomic multibody model