Yong Guo

This work aims to investigate the interfacial tension characteristics of alkyl carboxymethyl betaines dispersed at the crude oil/formation water interface. Four alkyl dimethyl carboxymethyl betaines and one alkyl diethyl carboxymethyl betaine were synthesized, then the effects of surfactant molecular structure, crude oil component, and inorganic salt composition of formation water on interfacial tensions were studied systematically. The results show that the synthesized octadecyl diethyl carboxymethyl betaine has the highest interfacial activity and exhibits superior anti-dilution performance. In the presence of polyacrylamide, this betaine also displays good anti-adsorption capability. With respect to crude oil components, the resin component, especially the petroleum acid and alkali components, play important roles in tension reduction. For formation water, its alkaline inorganic salts are crucial to obtain an ultra-low interfacial tension by its saponification effect on petroleum acid. The octadecyl diethyl carboxymethyl betaine also exhibits good temperature and salt resistance, but poor tolerance toward divalent cations owing to the consumption of alkaline inorganic salts. Moreover, it is found that there exists synergism between octadecyl diethyl carboxymethyl betaine and dodecylbenzene sulfonate which can further reduce the interfacial tension. The above findings are conducive to the selection of betaine surfactants in chemical flooding.

This study investigates coke formation, structure, and combustion behaviors in paraffin-based Menggulin and naphthenic-based Xinjiang heavy oils under simulated in-situ combustion (ISC) conditions (350 °C, 450 °C), utilizing GC-MS, SEM, ¹³C ss-NMR, and TG-DSC. The results indicate that the crude oil composition determines the coking mechanisms: Xinjiang oil, rich in cyclic hydrocarbons and O/N/S heteroatoms, forms high-yield, compact, sheet- or block-like coke at 350 °C via π–π stacking. In contrast, Menggulin oil, composed primarily of long-chain alkanes, yields loose coke at 350 °C but produces dense, highly aromatized coke at 450 °C, which corresponds to the critical alkane cracking temperature, through intense cracking–polymerization. Temperature differentially regulates oxidative processes, thereby shaping the divergent functional group distributions. Correlations between coke structure and combustion properties reveal that oxygenated/aliphatic-rich cokes exhibit high reactivity, whereas aromatized cokes release more heat. These findings provide guidance for ISC optimization, suggesting that sufficient high-temperature energy is required for paraffinic oils while medium-temperature oxidation regulation is suitable for naphthenic oils. This work advances the theory of ISC coke formation and supports enhanced recovery of heavy oils.

This study conducted in situ combustion oxidation experiments on crude oil from Block D within the Liaohe Oilfield, utilizing a kettle furnace low-pressure oxidation reaction method at various temperatures. The molecular composition of oxidation products was analyzed using gas chromatography–mass spectrometry (GC–MS) and high-resolution mass spectrometry. The results reveal that the molecular composition of the products remains relatively stable up to 300 °C, exhibiting a slight increase in C₁₃-C₃₀ alkanes. The ratio of the peak area for C₂₁ to bisnorhopane is 0.082. From 300 °C to 450 °C, compounds with long alkyl chains gradually undergo thermal cracking, resulting in a significant increase in the production of alkanes within the C₁₀–C₃₀ range. The concentration of saturated hydrocarbons produced through thermal cracking reaches its maximum at a temperature of 400 °C. The most abundant peak of n-alkane is observed at C₂₁, with a quantified ratio of peak area for C₂₁ to bisnorhopane at 6.5, indicating a two-order magnitude increase compared to crude oil. From 500 °C to 600 °C, compounds undergo more profound thermal cracking and condensation processes. The predominant hydrocarbons consist of aromatic molecules containing two to six rings substituted with short side chains. The double bond equivalent (DBE) values of carbazoles and carboxylic acids are determined as 30 and 25, respectively. At 600 °C, the peak area ratio of naphthalene to biodecane is 300, indicating a remarkable increase of five orders of magnitude compared to the crude oil. The present study elucidates the correlation between the characteristics of combustion components in crude oil and the corresponding combustion temperature. Primary cracking reactions within crude oil are promoted effectively when keeping the combustion zone at 350 °C and 450 °C. This process significantly reduces the viscosity of heavy oil and enhances its fluidity.

A novel mosaic structure Silica@C/Co@ZIF-67 composite was synthesized by successfully embedding Co nanoparticles on the surface of silica spheres with the help of thermoplastic polyethyleneimine by carbon-reduction. The ZIF-67 half-shell layer structure was synthesized by the in-situ growth of ZIF-67 on the surface of silica spheres through the coordination of 2-methylimidazole with Co metal nodes. The composite was used as a magnetic solid-phase extraction adsorbent combined with high performance liquid chromatography-ultraviolet detector (HPLC–UV) for the extraction and determination of benzoylurea insecticides (BUs) in vegetables and tea. Based on the presence of π-π, hydrophobic and hydrogen bonding interactions between Silica@C/Co@ZIF-67 and BUs, the BUs were rapidly captured by the composites resulting in high adsorption performance. Under the optimal extraction parameters, the linear ranges were 0.3–200 µg L⁻¹ for diflubenzuron, 0.6–200 µg L⁻¹ for chlorbenzuron, and 1.0–200 µg L⁻¹ for triflumuron, teflubenzuron, and flufenoxuron, with correlation coefficients (R²) greater than 0.9991. The limits of detection (LODs) of the method were 0.1–0.3 μg L⁻¹, and the relative standard deviations (RSDs) were 1.2–3.0% for intra-day and 2.6–4.6% for inter-day. In the spiked recovery experiments of vegetables and tea, the recoveries of the five kinds of BUs ranged from 75.8 to 112.9%. In addition, after 10 repetitions using Silica@C/Co@ZIF-67, the recoveries of the five kinds of BUs were still as high as 78.4 to 83.9%. Graphical abstract