DKDinh Quang Khieu

Dinh Quang Khieu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Dinh Quang Khieu has a total of 355 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synthesis and application of ZnO/chitosan oligosaccharide/humic acid derived from natural peat

    by Nguyen Mau Thanh, Nguyen Giang Nam, Nguyen Thanh Binh, Pham Khac Lieu, Le Lam Son, Dinh Quang Khieu

    This study reports the synthesis of a ZnO/chitosan oligosaccharide/humic acid-rich fraction (ZnO/COS/HA) bioformulation based on zinc oxide particles consisted of nanosized crystallites (11.4–23.7 nm) assembled into larger submicron rod-like particles stabilized by chitosan oligosaccharides and humic acid derived from natural peat. The material was characterized using x-ray diffraction, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, Fourier-transform infrared spectroscopy, and energy-dispersive x-ray analysis, confirming the formation of an organic–inorganic hybrid system. The ZnO/COS/HA bioformulation exhibited measurable antibacterial activity against five bacterial strains, including S. aureus, Bacillus subtilis, E. coli, P. aeruginosa , and Enterobacter , with minimum inhibitory concentration values ranging from 75–100 mg l −1 . The material also enhanced seed germination and early root development of chestnut (Castanea mollissima), with the most favorable performance observed at 1000 ppm. Higher concentrations resulted in reduced germination and root growth, suggesting concentration-dependent phytotoxic effects. In a field trial conducted from January–April 2025, foliar application of ZnO/COS/HA improved several growth and yield-related parameters of peanut (Arachis hypogaea) compared with the untreated control, resulting in an increase in yield of approximately 14.9%. Although the mechanisms underlying the antibacterial and plant-growth-promoting effects were not directly investigated, the results demonstrate the multifunctional characteristics of the ZnO/COS/HA bioformulation and suggest its potential utility as a combined antibacterial and plant-growth-promoting material.

  • Open Access

    Elucidating Visible‐Light Photocatalytic Degradation of Organophosphorus Residues Over Reduced Graphene Oxide/Iron‐Manganese Mixed Oxides Composite

    by Ngoc Chuc Pham, Ha Chi Nguyen, Vu Ngoc Mai Nguyen, Quang Khieu Dinh, Minh Phuong Nguyen, Quang Bac Nguyen, Thi Ha Chi Nguyen, Minh Tri Truong, Ngoc Nhiem Dao, Trung Kien Nguyen

    In this work, a ternary Fe 2 O 3 /Mn 2 O 3 /reduced graphene oxide (FM/rGO) composite was prepared via a rapid microwave‐assisted coprecipitation method. The engineered composite exhibited exceptional visible‐light‐driven photocatalytic activity as compared to both single Fe 2 O 3 and Fe 2 O 3 /Mn 2 O 3 (FM) heterojunction, achieving nearly complete degradation of parathion, a resistant organophosphorus pollutant, within 60 min accompanied by a remarkable mineralization (∼86% TOC removal). Kinetic analysis confirmed that the degradation complies with a pseudo‐first‐order model with a significant rate of 0.0597 min −1 . Comprehensive photoelectrochemical measurements revealed that the Type‐I FM heterojunction and the highly conductive rGO network facilitate efficient charge transfer. Interestingly, the coexistence of mixed‐valence transition metals (Fe 3+ /Fe 2+ and Mn 3+ /Mn 2+ ) alongside a high density of π bonds in rGO carriers served as dynamic electron traps, effectively accelerating spatial charge separation and suppressing electron‐hole recombination. Radical scavenging and GC‐MS analyses identified critical roles of hydroxyl radicals (•OH) for the P─O–aryl bond cleavage. Furthermore, the FM/rGO composite demonstrated practical magnetic recoverability and outstanding cyclic stability, providing a robust and highly efficient photocatalytic platform for hazardous pollutant remediation.

  • Open Access

    Simultaneous electrochemical determination of acetaminophen and ciprofloxacin in pharmaceutical formulations using a holmium-modified UiO-66 metal-organic framework electrode

    by Nguyen Quang Man, Pham Thi Huyen Thoa, Phan Tu Quy, Truong Thi Phuong Nga, Cao Van Hoang, Le Van Thanh Son, Le Thi Hong Phong, Pham Khac Lieu, Le Lam Son, Dinh Quang Khieu

    Background and purpose: The simultaneous determination of acetaminophen (ACE) and ciprofloxacin (CIP) is of considerable importance for pharmaceutical quality control, necessitating the development of sensitive and reliable electrochemical sensors. In this study, a holmium-modified UiO-66 metal-organic framework (Ho/UiO-66) was synthesized and evaluated as an electrode modifier for the simultaneous electrochemical determination of ACE and CIP. Experimental approach: Ho/UiO-66 was synthesized via a solvothermal method and characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, Raman spectroscopy, nitrogen adsorption-desorption analysis, scanning electron microscopy, transmission electron microscopy and energy-dispersive X-ray mapping. The electrochemical behaviour of ACE and CIP at the Ho/UiO-66-modified glassy carbon electrode (Ho/UiO-66/GCE) was investigated using cyclic voltammetry and differential pulse vol­tam­metry. The effects of solution pH, scan rate, accumulation potential, and accumulation time were syste­matically optimized. Key results: The characterization results demonstrated the successful incorporation of Ho species while preserving the crystalline structure of UiO-66. Among the investigated materials, Ho/UiO-66 (3/100 molar ratio) exhibited the most favourable combination of crystallinity, porosity and electrochemical performance, and was therefore selected for sensor fabrication. Under the optimized conditions, well-resolved oxidation peaks for ACE and CIP were obtained, enabling their simultaneous determination without mutual interference. The oxidation processes were found to be predominantly diffusion-controlled. The developed sensor exhibited satisfactory analytical performance with wide linear concentration ranges, low detection limits, satisfactory repeatability, reproducibility, and long-term stability. The sensor was applied to the determination of ACE and CIP in real pharmaceutical samples with satisfactory recoveries. The analytical results showed good agreement with those obtained using the reference high-performance liquid chromatography method. Conclusion: The proposed Ho/UiO-66/GCE sensor provides a reliable and practical platform for the simultaneous electro­chemical determination of ACE and CIP, demonstrating its potential applicability for pharmaceutical analysis.

  • Open Access

    Electrochemical sensing of sildenafil in pharmaceutical formulations using an (S,N)-doped reduced graphene oxide-modified electrode

    by Nguyen Quang Man, Ngo Thi Thanh Xuan, Vo Thi Khanh Ly, Le Van Thanh Son, Le Duc Anh, Le Thi Hong Phong, Nguyen Hai Phong, Pham Khac Lieu, Le Lam Son, Dinh Quang Khieu

    In this work, (S,N)-co-doped reduced graphene oxide ((S,N)-rGO) was successfully synthesized via thermal treatment and thoroughly characterized by X-ray diffraction, high-resolution transmission electron microscopy, elemental mapping, photoluminescence, and Raman spectroscopy, confirming the successful incorporation of nitrogen and sulfur into the graphene framework. The obtained (S,N)-rGO was used to modify a glassy carbon electrode for the electrochemical determination of sildenafil (SDN). The modified electrode exhibited enhanced electrocatalytic activity toward SDN oxidation, providing a well-defined current response. Under optimized conditions, the sensor showed a good linear relationship between peak current and SDN concentration in the range of 0.25–4.98 µM, with a low limit of detection of 0.24 µM and a limit of quantification of 0.78 µM. The proposed sensor demonstrated satisfactory repeatability, reproducibility, and stability, as well as good selectivity in the presence of potential interfering substances. The applicability of the method was validated by the determination of SDN in pharmaceutical samples. The results were in good agreement with those from high-performance liquid chromatography, indicating that the proposed electrochemical method is reliable and suitable for practical analysis.

  • Electrochemical determination of ranitidine and ornidazole in pharmaceutical formulations using a Fe2O3/rGO nanocomposite-modified electrode

    by Dang Thi Ngoc Hoa, Nguyen Duc Hong, Hoang Ho Thuy Duong, Nguyen Hai Phong, Nguyen Duc Vu Quyen, Pham Thang Long, Vo Chau Ngoc Anh, Le Thi Hong Phong, Dinh Quang Khieu

  • Open Access

    Electrochemical detection of illicit sibutramine adulteration in herbal weight-loss products using an AgNPs-ErGO modified electrode

    by Nguyen Dang Thuy Anh, Vo Thi Cam Le, Huynh Van Chung, Ngo Thi Thanh Xuan, Hoang Thi Minh Nguyet, Pham Thi Thanh Ha, Ha Thuy Trang, Le Hoang Hao, Dao Thi Cam Minh, Nguyen Hai Phong, et al.

    Background and purpose: Sibutramine is a synthetic anti-obesity drug that has been banned or restricted in many countries due to serious cardiovascular risks. However, its illegal adulteration in herbal weight-loss products remains a public health concern. This study aimed to develop a simple, sensitive, and reliable electrochemical method for the determination of sibutramine in herbal weight-loss products using a silver-nanoparticle-electrochemically reduced graphene oxide modified glassy carbon electrode. Experimental approach: Graphene oxide, electrochemically reduced graphene oxide, silver nanoparticles and AgNPs-ErGO nanocomposite were synthesized and characterized using X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy combined with energy dispersive X-ray spectroscopy, Raman spectroscopy and high-resolution transmission electron microscopy. The AgNPs-ErGO-modified glassy carbon electrode was fabricated and used for sibutramine detection by linear sweep voltammetry. Experimental parameters affecting the analytical signal were optimized. The method was validated according to AOAC guidelines and compared with an HPLC-DAD reference method. Key results: The AgNPs-ErGO/GCE exhibited improved electrochemical response toward sibutramine compared with bare and other modified electrodes. The developed method showed good selectivity, linearity, precision, accuracy, and sensitivity for sibutramine determination. Application to commercial herbal weight-loss samples demonstrated the suitability of the proposed method for real sample analysis, with results comparable to those obtained by HPLC-DAD. Conclusion: The AgNPs-ErGO/ /GCE-based electrochemical method provides a rapid, cost-effective, and reliable approach for detecting sibutramine adulteration in herbal weight-loss products. This work contributes to the development of practical analytical tools for quality control and consumer safety monitoring.

  • Open Access

    NiFe₂O₄/(S,N)-doped graphene oxide composite as efficient electrochemical sensor for determination of sibutramine in dietary supplements

    by Ngo Thi Thanh Xuan, Le Thi Thanh Nhi, Nguyen Quang Man, Vo Thi Khanh Ly, Le Thi Hong Phong, Nguyen Hai Phong, Pham Khac Lieu, Le Lam Son, Dinh Quang Khieu

    A novel electrochemical sensor based on a NiFe₂O₄/(S,N)-doped graphene oxide compo­site (NiF/GrO(S,N)) was developed to detect sibutramine (SBT). The composite material was successfully synthesized and characterized using X-ray diffraction, Raman spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, nitrogen adsorption/ /desorption isotherms, and vibrating sample magnetometry. Results confirmed the forma­tion of a nanocrystalline NiFe₂O₄ structure uniformly dispersed on S,N-doped graphene sheets, providing a high surface area and numerous active sites. The NiF/GrO(S,N)-modified glassy carbon electrode (GCE) showed improved electrocatalytic activity toward SBT oxidation. Under optimized conditions, differential pulse voltammetry revealed two linear ranges from 0.5 to 8.9 µM and 8.9 to 19.6 µM, with a detection limit of 0.37 µM. The sensor also demonstrated good repeatability, reproducibility, and stability, along with effective anti-interference capabilities against common inorganic and organic substances. The practical applicability of the proposed sensor was successfully demonstrated by determining SBT in seven commercial dietary supplement samples. The obtained recoveries ranged from 96.38 to 104.83 %, and the results showed no statistically significant difference compared with those obtained using the standard HPLC method. These results suggest that the NiF/GrO(S,N)/GCE sensor is a promising platform for the rapid and reliable detection of SBT in real samples.

  • Simultaneous electrochemical determination of isoniazid and ethambutol in pharmaceutical formulations using a UiO-66 modified electrode

    by Pham Thi Huyen Thoa, Phan Tu Quy, Nguyen Quang Man, Ho Sy Linh, Le Thi Hong Phong, Le Van Thanh Son, Pham Khac Lieu, Le Lam Son, Dinh Quang Khieu


  • MoS2/activated carbon-modified electrode for electrochemical sensing of salbutamol

    by Nguyen Quang Man, Nguyen Van Hue, Vo Thi Khanh Ly, Nguyen Chi Bao, Huynh Van Hien, Do Mai Nguyen, Nguyen Hai Phong, Dinh Quang Khieu

  • Open Access

    Electrochemical determination of ciprofloxacin using a MIL-101/reduced graphene oxide-modified electrode

    by Nguyen Quang Man, Nguyen Ngoc Nghia, Nguyen Vinh Phu, Vo Thi Khanh Ly, Le Lam Son, Pham Khac Lieu, Le Thi Hong Phong, Nguyen Dinh Luyen, Dinh Quang Khieu

    An electrochemical sensor for the determination of ciprofloxacin (CPR) was developed using a glassy carbon electrode modified with MIL-101/reduced graphene oxide (MIL-101/rGO). MIL-101/rGO was synthesized via a facile ultrasonic-assisted method and characterized by various physicochemical techniques. The synergistic combination of MIL-101 with rGO significantly enhanced the electrocatalytic activity toward CPR oxidation. The electrochemical behavior of CPR on the MIL-101/rGO-modified electrode was systematically investigated using cyclic voltammetry and differential pulse voltammetry. Under optimized experimental conditions, the proposed sensor exhibited a linear response over 0.25–9.41 µM and a detection limit of 0.11 µM for CPR determination. The sensor also demonstrated good selectivity, satisfactory repeatability, and long-term stability. Furthermore, the method’s practical applicability was validated by the determination of CPR in pharmaceutical samples, yielding acceptable recoveries. These results indicate that the MIL-101/rGO-modified electrode provides a promising and efficient platform for the electrochemical sensing of CPR in pharmaceutical and environmental analysis.