SCSantiago Jose Cartamil-Bueno

Santiago Jose Cartamil-Bueno

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Santiago Jose Cartamil-Bueno has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Graphene mechanical pixels for Interferometric Modulator Displays

    by Santiago J. Cartamil-Bueno, Dejan Davidovikj, Alba Centeno, Amaia Zurutuza, Herre S. J. van der Zant, Peter G. Steeneken, Samer Houri

    Electro-optic modulators based on micro-electromechanical systems have found success as elements for optical projectors, for simplified optical spectrometers, and as reflective-type screens that make use of light interference (Interferometric Modulator Display technology). The latter concept offers an exciting avenue for graphene nanomechanical structures to replace classical micro-electromechanical devices and bring about enhancement in performance, especially switching speed and voltage. In this work we study the optical response of electrically actuated graphene drumheads by means of spectrometric and stroboscopic experiments. The color reproducibility and speed of these membranes in producing the desired electro-optic modulation makes them suitable as pixels for high refresh rate displays. As a proof of concept, we demonstrate a Graphene Interferometric Modulator Display prototype with 5 μm-in-diameter pixels that compose a high resolution image (2500 pixels per inch)—equivalent to a 5″ display of 12K—whose color can be changed at frame rates of at least 400 Hz.


  • Open Access

    On-chip Heaters for Tension Tuning of Graphene Nanodrums

    by Dejan Davidovikj, Menno Poot, Santiago Jose Cartamil-Bueno, Herre S. J. van der Zant, Peter Gerard Steeneken

    For the study and application of graphene membranes, it is essential to have means to control their tension, resonance frequency and temperature. Here, we present an on-chip heater platform for local tuning of in-plane tension in graphene mechanical resonators. By Joule heating of a metallic suspension ring we show thermomechanical resonance frequency tuning in a graphene nanodrum, which is accompanied by an increase in its quality factor, which we attribute to an increase of the in-plane tension. The in-situ control of temperature, in-plane tension, resonance frequency and quality factor of suspended two-dimensional (2D) nanodrums makes this device a unique platform for investigating the origin of dissipation in these ultra-thin structures and can be of fundamental importance for studying the thermal properties of 2D materials. Moreover, by simultaneously controlling the heater and the backgate voltage, we can independently control the resonance frequency and quality factor, which is of great importance for applications in sensors and resonant mechanical filters.


  • Open Access

    Nonlinear dynamic characterization of two-dimensional materials

    by D. Davidovikj, F. Alijani, S. J. Cartamil-Bueno, H. S. J. van der Zant, M. Amabili, P. G. Steeneken

    Owing to their atomic-scale thickness, the resonances of two-dimensional (2D) material membranes show signatures of nonlinearities at forces of only a few picoNewtons. Although the linear dynamics of membranes is well understood, the exact relation between the nonlinear response and the resonator’s material properties has remained elusive. Here we show a method for determining the Young’s modulus of suspended 2D material membranes from their nonlinear dynamic response. To demonstrate the method, we perform measurements on graphene and MoS2 nanodrums electrostatically driven into the nonlinear regime at multiple driving forces. We show that a set of frequency response curves can be fitted using only the cubic spring constant as a fit parameter, which we then relate to the Young’s modulus of the material using membrane theory. The presented method is fast, contactless, and provides a platform for high-frequency characterization of the mechanical properties of 2D materials.


  • Optomechanics for thermal characterization of suspended graphene

    by Robin J. Dolleman, Samer Houri, Dejan Davidovikj, Santiago J. Cartamil-Bueno, Yaroslav M. Blanter, Herre S. J. van der Zant, Peter G. Steeneken

    The thermal response of graphene is expected to be extremely fast due to its low heat capacity and high thermal conductivity. In this work, the thermal response of suspended single-layer graphene membranes is investigated by characterization of their mechanical motion in response to a high-frequency modulated laser. A characteristic delay time τ between the optical intensity and mechanical motion is observed, which is attributed to the time required to raise the temperature of the membrane. We find, however, that the measured time constants are significantly larger than the predicted ones based on values of the specific heat and thermal conductivity. In order to explain the discrepancy between measured and modeled τ, a model is proposed that takes a thermal boundary resistance at the edge of the graphene drum into account. The measurements provide a noninvasive way to characterize thermal properties of suspended atomically thin membranes, providing information that can be hard to obtain by other means.


  • Open Access

    Mechanical characterization and cleaning of CVD single-layer h-BN resonators

    by Santiago J. Cartamil-Bueno, Matteo Cavalieri, Ruizhi Wang, Samer Houri, Stephan Hofmann, Herre S. J. van der Zant

    Hexagonal boron nitride is a 2D material whose single-layer allotrope has not been intensively studied despite being the substrate for graphene electronics. Its transparency and stronger interlayer adhesion with respect to graphene makes it difficult to work with, and few applications have been proposed. We have developed a transfer technique for this extra-adhesive material that does not require its visual localization, and fabricated mechanical resonators made out of chemical vapor-deposited single-layer hexagonal boron nitride. The suspended material was initially contaminated with polymer residues from the transfer, and the devices showed an unexpected tensioning when cooling them to 3 K. After cleaning in harsh environments with air at 450 °C and ozone, the temperature dependence changed with f0Q products reaching 2 × 1010 Hz at room temperature. This work paves the way to the realization of highly sensitive mechanical systems based on hexagonal boron nitride, which could be used as an alternative material to SiN for optomechanics experiments at room temperature.


  • Very large scale characterization of graphene mechanical devices using a colorimetry technique

    by Santiago Jose Cartamil-Bueno, Alba Centeno, Amaia Zurutuza, Peter Gerard Steeneken, Herre Sjoerd Jan van der Zant, Samer Houri

    We use a scalable optical technique to characterize more than 21 000 circular nanomechanical devices made of suspended single- and double-layer graphene on cavities with different diameters (D) and depths (g). To maximize the contrast between suspended and broken membranes we used a model for selecting the optimal color filter. The method enables parallel and automatized image processing for yield statistics. We find the survival probability to be correlated with a structural mechanics scaling parameter given by D4/g3. Moreover, we extract a median adhesion energy of Γ = 0.9 J m−2 between the membrane and the native SiO2 at the bottom of the cavities.


  • Direct and parametric synchronization of a graphene self-oscillator

    by S. Houri, S. J. Cartamil-Bueno, M. Poot, P. G. Steeneken, H. S. J. van der Zant, W. J. Venstra

    We explore the dynamics of a graphene nanomechanical oscillator coupled to a reference oscillator. Circular graphene drums are forced into self-oscillation, at a frequency f osc , by means of photothermal feedback induced by illuminating the drum with a continuous-wave red laser beam. Synchronization to a reference signal, at a frequency f sync , is achieved by shining a power-modulated blue laser onto the structure. We investigate two regimes of synchronization as a function of both detuning and signal strength for direct ( f sync ≈ f o s c ) and parametric locking ( f sync ≈ 2 f osc ) . We detect a regime of phase resonance, where the phase of the oscillator behaves as an underdamped second-order system, with the natural frequency of the phase resonance showing a clear power-law dependence on the locking signal strength. The phase resonance is qualitatively reproduced using a forced van der Pol-Duffing-Mathieu equation.


  • Graphene gas osmometers

    by Robin J Dolleman, Santiago J Cartamil-Bueno, Herre S J van der Zant, Peter G Steeneken

    We show that graphene membranes that separate two gases at identical pressure are deflected by osmotic pressure. The osmotic pressure is a consequence of differences in gas permeation rates into a few-layer graphene enclosed cavity. The deflection of the membrane is detected by measuring the tension-induced resonance frequency with an interferometric technique. Using a calibration measurement of the relation between resonance frequency and pressure, the time dependent osmotic pressure on the graphene is extracted. The time dependent osmotic pressure for different combinations of gases shows large differences that can be accounted for by a model based on the different gas permeation rates. In this way, a graphene-membrane based gas osmometer with a responsivity of ∼60 kHz mbar –1 and nanoscale dimensions is demonstrated.


  • Colorimetry Technique for Scalable Characterization of Suspended Graphene

    by Santiago J. Cartamil-Bueno, Peter G. Steeneken, Alba Centeno, Amaia Zurutuza, Herre S. J. van der Zant, Samer Houri

    Previous statistical studies on the mechanical properties of chemical-vapor-deposited (CVD) suspended graphene membranes have been performed by means of measuring individual devices or with techniques that affect the material. Here, we present a colorimetry technique as a parallel, noninvasive, and affordable way of characterizing suspended graphene devices. We exploit Newton’s rings interference patterns to study the deformation of a double-layer graphene drum 13.2 μm in diameter when a pressure step is applied. By studying the time evolution of the deformation, we find that filling the drum cavity with air is 2–5 times slower than when it is purged.


  • Open Access

    Colorimetry technique for scalable characterization of suspended graphene

    by Santiago J. Cartamil-Bueno, Peter G. Steeneken, Alba Centeno, Amaia Zurutuza, Herre S. J. van der Zant, Samer Houri

    Previous statistical studies on the mechanical properties of chemical-vapor-deposited (CVD) suspended graphene membranes have been performed by means of measuring individual devices or with techniques that affect the material. Here, we present a colorimetry technique as a parallel, non-invasive, and affordable way of characterizing suspended graphene devices. We exploit Newton rings interference patterns to study the deformation of a double-layer graphene drum 13.2 micrometer in diameter when a pressure step is applied. By studying the time evolution of the deformation, we find that filling the drum cavity with air is 2-5 times slower than when it is purged.