Igor Konokh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Igor Konokh has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Nataliia Mykolaivna Istomina
Kremenchuk Mykhailo Ostrohradskyi National University, Kremenchuk, Ukraine
5 shared publications - Iryna Oksanych
Kremenchuk Mykhailo Ostrohradskyi National University
2 shared publications - Vitalii Naida
Kremenchuk Mykhailo Ostrohradskyi National University,Department of Automation and Information Systems,Kremenchuk,Ukraine
2 shared publications - Andrii Lomonos1 shared publication
- Anton Yuriiovych Halenko1 shared publication
- Artur Romanovych Zhulia1 shared publication
Latest Publications
- 1 January 2025
- Published by Publishing House Helvetica (Publications) in Transactions of Kremenchuk Mykhailo Ostrohradskyi National University
- No. 6,p. 197-204
DECENTRALIZED LAST-MILE DELIVERY REPLANNING UPON COURIER FAILURE
- 1 January 2025
- Published by Publishing House Helvetica (Publications) in Transactions of Kremenchuk Mykhailo Ostrohradskyi National University
- No. 6,p. 197-204
DECENTRALIZED LAST-MILE DELIVERY REPLANNING UPON COURIER FAILURE
- 1 January 2025
- Published by Publishing House Helvetica (Publications) in Engineering and Educational Technologies
- Vol. 13 (4) , 44
Development of a practical case for studying ballistic motion
- 1 January 2025
- Published by Publishing House Helvetica (Publications) in Engineering and Educational Technologies
- Vol. 13 (4) , 44
Development of a practical case for studying ballistic motion
- 30 August 2024
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 4,p. 121-127
Designing the predictive control of a drum dryer using multi-agent technology
Purpose. To increase the efficiency of drying lines for bulk products by automating control using intelligent technology to determine the state of the product and predict its initial moisture content by analyzing a series of control signals and messages in the time domain. Methodology. The author’s model of a drum dryer with axial and furnace burners for drying charge used for the production of iron ore concentrate – pellets – was used. The model was used to generate training and control examples. The performance of the multi-agent technology and the accuracy of predicting the initial moisture content were researched. Findings. The article analyses the factors that complicate the high-quality automatic control of the process of drying bulk products in drum dryers rotating in a furnace with burners. A model of an intelligent predictor is proposed, which identifies the state of the product and predicts its output moisture content on the basis of available control and feedback signals. The operability of the multi-agent system model and of the calculating algorithms for the predicted moisture value was proved. The possibility of using the technology to ensure automatic control of the technological process and high-quality stabilization of the controlled parameter are demonstrated. Originality. The predictor is implemented as a peer-to-peer multi-agent system. This multi-agent system stores and works signal vectors with values placed by the time delays between the change in the corresponding signal and the change in product moisture at the dryer outlet. Each agent contains a description of a specific situation in the dynamics. The technology provides for automatic adjustment of the multi-agent system by analyzing arrays of signals over a long time period and generating new agents in cases where a situation is detected which cannot be described by an array of existing agents. Practical value. The technology provides the initial moisture content calculation by an array of agents and allows the dryer automatic control by levelling the time delay in the feedback channel.
- 30 August 2024
- Published by Dnipro University of Technology in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
- No. 4,p. 121-127
Designing the predictive control of a drum dryer using multi-agent technology
Purpose. To increase the efficiency of drying lines for bulk products by automating control using intelligent technology to determine the state of the product and predict its initial moisture content by analyzing a series of control signals and messages in the time domain. Methodology. The author’s model of a drum dryer with axial and furnace burners for drying charge used for the production of iron ore concentrate – pellets – was used. The model was used to generate training and control examples. The performance of the multi-agent technology and the accuracy of predicting the initial moisture content were researched. Findings. The article analyses the factors that complicate the high-quality automatic control of the process of drying bulk products in drum dryers rotating in a furnace with burners. A model of an intelligent predictor is proposed, which identifies the state of the product and predicts its output moisture content on the basis of available control and feedback signals. The operability of the multi-agent system model and of the calculating algorithms for the predicted moisture value was proved. The possibility of using the technology to ensure automatic control of the technological process and high-quality stabilization of the controlled parameter are demonstrated. Originality. The predictor is implemented as a peer-to-peer multi-agent system. This multi-agent system stores and works signal vectors with values placed by the time delays between the change in the corresponding signal and the change in product moisture at the dryer outlet. Each agent contains a description of a specific situation in the dynamics. The technology provides for automatic adjustment of the multi-agent system by analyzing arrays of signals over a long time period and generating new agents in cases where a situation is detected which cannot be described by an array of existing agents. Practical value. The technology provides the initial moisture content calculation by an array of agents and allows the dryer automatic control by levelling the time delay in the feedback channel.
- 1 January 2024
- Published by Publishing House Helvetica (Publications) in Electromechanical and energy saving systems
- Vol. 65 (2) , 21-30
FEATURES OF THE LOAD OF THE AUTOMATED ELECTRIC DRIVE FOR MOVING THE PLATES OF THE FKM-500 FILTER PRESS
- 1 January 2024
- Published by Publishing House Helvetica (Publications) in Electromechanical and energy saving systems
- Vol. 65 (2) , 21-30
FEATURES OF THE LOAD OF THE AUTOMATED ELECTRIC DRIVE FOR MOVING THE PLATES OF THE FKM-500 FILTER PRESS
- 31 December 2022
- Published by Publishing House Helvetica (Publications) in Engineering and Educational Technologies
- Vol. 10 (4) , 20-34
The Skills Formation of Configuring Industrial Controllers of the Siemens Simatic S7 family for students of educational programs in automation
The work is devoted to the development of a lesson that will allow students of automation educational programs to develop the skills of configuring industrial controllers of the Siemens Simatic S7 family. During developing the lesson, it was decided to use the format of laboratory work with the involvement of modern forms of students' work activation. Structurally, the student's work per class consists of independent and classroom work. Independent work includes watching educational videos and studying theoretical material. Auditory work consists of participation in a master class conducted by the teacher and completion of an individual task, where the teacher acts as a consultant. The developed lesson can be conducted both face-to-face and remotely. Under conducting a distance lesson, the teacher needs to pay more attention to the means of receiving feedback from students, as well as limit the number of participants, in order to improve the uniformity of learning the material by students. Methodical and visual support was developed to support the lesson: the list of video materials for viewing; reference book on theoretical material; the presentation to accompany the creation of a sample software project; individual tasks for students. The developed lesson was approved in remote form, considering the current situation in Ukraine. For the first time, an integrated product was created for training students in the skills of configuring industrial controllers of the Siemens Simatic S7 family, which is characterized by an orientation towards familiarity with the TIA Portal environment, development to support each stage of the lesson with methodical and visual support, a complete structure of information presentation, and the use of such modern forms of education, like a master class. The developed lesson allows students of automation educational programs to develop the skill of configuring industrial controllers of the Siemens Simatic S7 family in a fairly short time at a sufficiently high level. Further work of students consists of creating software projects based on real automation tasks. Key words: automatically integrated technologies, professional competences, master class, methodological support, TIA Portal.
- 31 December 2022
- Published by Publishing House Helvetica (Publications) in Engineering and Educational Technologies
- Vol. 10 (4) , 20-34
The Skills Formation of Configuring Industrial Controllers of the Siemens Simatic S7 family for students of educational programs in automation
The work is devoted to the development of a lesson that will allow students of automation educational programs to develop the skills of configuring industrial controllers of the Siemens Simatic S7 family. During developing the lesson, it was decided to use the format of laboratory work with the involvement of modern forms of students' work activation. Structurally, the student's work per class consists of independent and classroom work. Independent work includes watching educational videos and studying theoretical material. Auditory work consists of participation in a master class conducted by the teacher and completion of an individual task, where the teacher acts as a consultant. The developed lesson can be conducted both face-to-face and remotely. Under conducting a distance lesson, the teacher needs to pay more attention to the means of receiving feedback from students, as well as limit the number of participants, in order to improve the uniformity of learning the material by students. Methodical and visual support was developed to support the lesson: the list of video materials for viewing; reference book on theoretical material; the presentation to accompany the creation of a sample software project; individual tasks for students. The developed lesson was approved in remote form, considering the current situation in Ukraine. For the first time, an integrated product was created for training students in the skills of configuring industrial controllers of the Siemens Simatic S7 family, which is characterized by an orientation towards familiarity with the TIA Portal environment, development to support each stage of the lesson with methodical and visual support, a complete structure of information presentation, and the use of such modern forms of education, like a master class. The developed lesson allows students of automation educational programs to develop the skill of configuring industrial controllers of the Siemens Simatic S7 family in a fairly short time at a sufficiently high level. Further work of students consists of creating software projects based on real automation tasks. Key words: automatically integrated technologies, professional competences, master class, methodological support, TIA Portal.
- 20 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Designing the Cybernetic Model of Ore Grinding Technological Operation
The aim of the work is increasing of industrial complexes operation profitability for ore's grinding and classification at mining and beneficiation factories by introducing complex performance factors into the technological regimes process forming. To solve the given problem, the provisions of the efficiency theory, methods of building extreme control systems are used. The model for determining the overall efficiency of technological complex production activity has been created. This model performs calculations based on available technological signals and allows determining the task effects of technological regulators based on profitability requirements. The paper proposes an approach to replacing the quality criterion with an analytically determined global optimum criterion for improving the profitability of the iron ore's grinding and classifying technological process, based on the provisions of the efficiency theory. Synthesized structural diagram of the system for determining the components of the optimality criterion considers all significant parameters of raw materials, energy, resource of equipment and finished product. On the basis of the conducted research, it becomes possible to determine the structure and composition of the hardware and software of the optimal control system for wet grinding area and ensure the maximum possible profitability of the technological complex.
- 20 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Designing the Cybernetic Model of Ore Grinding Technological Operation
The aim of the work is increasing of industrial complexes operation profitability for ore's grinding and classification at mining and beneficiation factories by introducing complex performance factors into the technological regimes process forming. To solve the given problem, the provisions of the efficiency theory, methods of building extreme control systems are used. The model for determining the overall efficiency of technological complex production activity has been created. This model performs calculations based on available technological signals and allows determining the task effects of technological regulators based on profitability requirements. The paper proposes an approach to replacing the quality criterion with an analytically determined global optimum criterion for improving the profitability of the iron ore's grinding and classifying technological process, based on the provisions of the efficiency theory. Synthesized structural diagram of the system for determining the components of the optimality criterion considers all significant parameters of raw materials, energy, resource of equipment and finished product. On the basis of the conducted research, it becomes possible to determine the structure and composition of the hardware and software of the optimal control system for wet grinding area and ensure the maximum possible profitability of the technological complex.
- 11 June 2021
- Published by Kremenchuk Mykhailo Ostohradskyi National University in Transactions of Kremenchuk Mykhailo Ostrohradskyi National University
- No. 3(128)
IMPROVING THE EFFICIENCY OF DIAGNOSTICS OF LAMINATED CORES AND DETERMINING THE CURRENT STATE OF SYNCHRONOUS MOTORS
Topicality. Today a large number of synchronous motors with long mean-time-between-failures operate under the conditions of industrial enterprises. They are mainly characterized by difference from the published electromagnetic parameters and degraded energy and reliability indicators, increased heating of the windings and electromagnetic vibrations, which causes a reduction in power on the shaft. Among other reasons, this is due to changes in the properties of laminated stator cores, which is the main structural element that is not replaced during repairs. Purpose. Determination of the main set of independent diagnostic parameters that would reliably distinguish the main types of defects of stator cores, first of all loosening and shorting, during their local testing using induction method and features of artificial neural networks in problems of video identification of core surface and determination of the state of synchronous motors. Metodology. The research methods of theoretical calculations of nonlinear electric circuits with non-sinusoidal power supply and methods of video identification for determination of diagnostic parameters and defects of laminated cores and the theory of neural networks in determining the current state of cores and synchronous motors in general were used during the research. Results. The obtained results specify the conditions of local testing of laminated cores from the standpoint of determining the required set of diagnostic parameters sensitive to the main types of defects, using a contactless test method, reveal the features of the use of neural network analyzers to determine the defects of the tooth zone by video identification and substantiate the principles of application of artificial neural networks in problems of predicting the states of major structural units and synchronous motors in general, due to changing properties of stator cores. Originality. The obtained results allow determining the state of the stator core and taking into account the influence of its change on the current state of synchronous motors with long or intensive operation. Practical value. The research results make it possible to assess the changes in the main parameters and characteristics of synchronous motors, determined by the actual state of the laminated stator cores and take into account their impact on energy efficiency, reliability and other operating parameters of synchronous motors. References 10, figures 7.
- 11 June 2021
- Published by Kremenchuk Mykhailo Ostohradskyi National University in Transactions of Kremenchuk Mykhailo Ostrohradskyi National University
- No. 3(128)
IMPROVING THE EFFICIENCY OF DIAGNOSTICS OF LAMINATED CORES AND DETERMINING THE CURRENT STATE OF SYNCHRONOUS MOTORS
Topicality. Today a large number of synchronous motors with long mean-time-between-failures operate under the conditions of industrial enterprises. They are mainly characterized by difference from the published electromagnetic parameters and degraded energy and reliability indicators, increased heating of the windings and electromagnetic vibrations, which causes a reduction in power on the shaft. Among other reasons, this is due to changes in the properties of laminated stator cores, which is the main structural element that is not replaced during repairs. Purpose. Determination of the main set of independent diagnostic parameters that would reliably distinguish the main types of defects of stator cores, first of all loosening and shorting, during their local testing using induction method and features of artificial neural networks in problems of video identification of core surface and determination of the state of synchronous motors. Metodology. The research methods of theoretical calculations of nonlinear electric circuits with non-sinusoidal power supply and methods of video identification for determination of diagnostic parameters and defects of laminated cores and the theory of neural networks in determining the current state of cores and synchronous motors in general were used during the research. Results. The obtained results specify the conditions of local testing of laminated cores from the standpoint of determining the required set of diagnostic parameters sensitive to the main types of defects, using a contactless test method, reveal the features of the use of neural network analyzers to determine the defects of the tooth zone by video identification and substantiate the principles of application of artificial neural networks in problems of predicting the states of major structural units and synchronous motors in general, due to changing properties of stator cores. Originality. The obtained results allow determining the state of the stator core and taking into account the influence of its change on the current state of synchronous motors with long or intensive operation. Practical value. The research results make it possible to assess the changes in the main parameters and characteristics of synchronous motors, determined by the actual state of the laminated stator cores and take into account their impact on energy efficiency, reliability and other operating parameters of synchronous motors. References 10, figures 7.