YCYuanjing Cai

Yuanjing Cai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuanjing Cai has a total of 130 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Phenazine‐Based Thermally Activated Delayed Fluorescence Red Emitter With Negligible Efficiency Roll‐Off in Organic Light‐Emitting Diode

    by Xiangchao Peng, Kerim Samedov, Xiaoping Wang, Yanfei Lu, Mingxing Chen, Bingfei Wang, Xinying Wang, Wei Ling, Dongcheng Chen, Yuanjing Cai

    Red emitters with thermally activated delayed fluorescence (TADF) often suffer from low electroluminescence efficiency and poor device stability, primarily due to their small energy gap, fast nonradiative decay, and aggregation‐caused quenching. Although such emitters exhibit an efficient reverse intersystem crossing (RISC) process, their long excited‐state lifetimes and low radiative transition rates (k r ) can lead to severe efficiency roll‐off in devices. In this study, we designed and synthesized two highly twisted donor–acceptor‐donor (D‐A‐D) type red TADF emitters ( DPhOz‐BPPZ and DPhTz‐BPPZ ) using dibenzo[a, c]dipyrido[3,2‐h:2′, 3′‐j]phenazine ( BPPZ ) as the electron acceptor. These compounds show emission peaks at around 660 nm with short photoluminescence lifetimes (RISC rates (5.21 × 10 4 s −1 and 4.19 × 10 4 s −1 ), in which the DPhOz‐BPPZ doped film (10.17 wt% in CBP) achieves a higher k RISC rate of 1.68 × 10 6 s −1 . Notably, DPhOz‐BPPZ demonstrates a high thermal stability and a typical TADF character. When it was applied as a dopant in the emitting layer, a red organic light‐emitting diode (OLED) was obtained with a high maximum external quantum efficiency (EQE max ) of 10.8% and a significantly negligible efficiency roll‐off of only 0.19% at 100 cd m −2 , manifesting an excellent device stability among all reported phenazine‐based red TADF OLEDs.

  • Phenyl Spacer Modulation of 2,5-Substituted D–A-Type Siloles for Efficient Nondoped OLEDs

    by Guoqing Peng, Kerim Samedov, Mingxing Chen, Yuanjing Cai

    Organic fluorophores with planar structures applied in organic light-emitting diodes (OLEDs) favor π-π stacking in aggregates, resulting in low photoluminescence quantum yields (PLQYs). Incorporation of molecular rotors such as phenyls on the periphery of fluorophores such as silole can prevent π-π stacking in aggregates to minimize fluorescence quenching. In this study, we introduced electron-donor (D) units (9,9-dimethylacridine and phenoxazine) at the positions 2 and 5 of tetraphenylsilole to form D-A-type molecules, in which the tetraphenylsilole unit acts as an electron acceptor (A). Compared to the molecular design of D-A-type siloles, further modification via the addition of a phenyl spacer group between D and A units leads to the resulting D-Ph-A-type silole molecules (Silole-Ph-AC and Silole-Ph-PXZ, where Ph-AC is 10-biphenyl-9,9-dimethylacridine and Ph-PXZ is N-biphenylphenoxazine) being more twisted and less prone to π-π stacking molecular structures, resulting in improved photophysical properties such as a blue-shifted emission, a higher fluorescence efficiency, and a better external quantum efficiency (EQE) when they are applied in nondoped OLEDs. Among them, the Silole-Ph-AC-based OLED exhibits the best EQEmax of 5.52%.


  • Hybridized local and charge-transfer excitation in 2,5-substituted D–A type siloles for efficient OLEDs

    by Liang Zhang, Linzhong Wang, Kerim Samedov, Mingxing Chen, Dongcheng Chen, Yuanjing Cai

    Hybridized local and charge-transfer (HLCT) excitation in molecules can utilize triplet excitons efficiently via the high-energy reverse intersystem crossing (hRISC) process. The molecular design to realize HLCT is usually based on the structural arrangement of the constituent electron donor (D) and acceptor (A) units to form D–A or D–π–A structures. A motif that enables local excitation, good carrier transport and efficient emission – silole, specifically its 2,5-substituted derivatives – can be structurally modified to tune the optoelectronic properties. Here, we designed two derivatives, Silole-2,5DPA-TRZ and Silole-2,5Cz-TRZ, in which the electron acceptor triazine (TRZ) and the electron donor diphenylamine (DPA) or carbazole (Cz) modified at the 2,5-positions of a silole core form silole-D–A structures. This structural design, for the first time, allowed us to realize the HLCT character in 2,5-substituted silole derivatives. Experimental and theoretical studies revealed that Silole-2,5DPA-TRZ exhibits more balanced contributions of local excitation and charge transfer components to the HLCT state compared to the stronger charge transfer state in Silole-2,5Cz-TRZ. The organic light-emitting diode (OLED) based on the Silole-2,5DPA-TRZ emitter displays a high maximum external quantum efficiency (EQEmax) of 6.13% with a maximum emission peak wavelength at 532 nm, which is the hitherto highest reported EQEmax for OLEDs based on 2,5-substituted silole derivatives.


  • Aggregation-enhanced TADF in deep-red emitters for high-performance OLEDs

    by Chengrui Huang, Jianping Zhou, Kerim Samedov, Liang Zhang, Guoqing Peng, Xiangchao Peng, Mingxing Chen, Dongdong Zhang, Yuanjing Cai

    Significant aggregation-enhanced TADF is observed in the D 2 –A structure based on quinoxaline-6,7-dicarbonitrile, realizing a high performance deep-red OLED.


  • 1,5-Disila-s-indacene-based emitters: a molecular design towards efficient blue OLEDs

    by Jianbin Feng, Kerim Samedov, Yanfei Lu, Dongcheng Chen, Yuanjing Cai

    The π-extended bisilole molecular design strategy enables the tetra-substituted 1,5-disila-s-indacene-based device with the hitherto highest efficiency of a silole-based blue OLED.

  • Design of Efficient Benzosilole Derivatives for Tuning High‐Performance HLCT OLEDs

    by Guoqing Peng, Linzhong Wang, Liang Zhang, Kerim Samedov, Han Li, Mingxing Chen, Yanfei Lu, Dongcheng Chen, Yuanjing Cai

    Properties of hybridized local and charge‐transfer (HLCT) materials can be tuned by adjusting locally excited (LE) and charge‐transfer (CT) components, resulting in either quasi‐equivalent hybridization or non‐equivalent hybridization. These HLCT materials are easily designed on the molecular level to be applied in organic light‐emitting diodes (OLEDs), which have advantages in the aspects of external quantum efficiency (EQE), efficiency roll‐off, and color purity. In previous work, an HLCT silole derivative with an electron donor (D) – acceptor (A) structure modified at 1‐position achieved a breakthrough in the external quantum efficiency (EQE) of 9.1%. Whereas such molecular design generally leads to low PLQYs, limiting the further improvement of EQE. Thinking a more rigid structure design strategy, in this work, silole is replaced with a more rigid benzosilole structure that is selectively modified by a carbazole (Cz) or 9,9‐dimethyl‐9,10‐dihydroacridine (Ac) unit as donor and triazine (TRZ) unit as the acceptor, leading to higher PLQYs of the CT‐like HLCT molecule DCz‐BS‐TRZ, and quasi‐equivalent HLCT molecule DAc‐BS‐TRZ. Among these two molecules, the DCz‐BS‐TRZ‐based OLED device has shown a remarkable 13% EQEmax, which is the highest EQE for silole‐based OLEDs.


  • Multi‐Functional Silole Hole Transport Layer for Efficient and Stable Lead–Tin Perovskite and Tandem Solar Cells

    by Yuanjing Cai, Aidan Maxwell, Chongwen Li, Eui Dae Jung, Lewei Zeng, Boran Kumral, Peter Serles, Zhan'AO Tan, Runnan Yu, Salvatore Boccia, et al.

    Despite high theoretical efficiencies and rapid improvements in performance, high‐efficiency ≈1.2 eV mixed Sn–Pb perovskite solar cells (PSCs) generally rely on poly(3,4‐ethylenedioxythiophene) polystyrenesulfonate (PEDOT: PSS) as the hole transport layer (HTL); a material that is considered to be a bottleneck for long‐term stability due to its acidity and hygroscopic nature. Seeking to replace PEDOT: PSS with an alternative HTL with improved atmospheric and thermal stability, herein, a silole derivative (Silole‐COOH) tuned with optimal electronic properties and efficient carrier transport by incorporating a carboxyl functional group is designed, which results in an optimal band alignment for hole extraction from Sn–Pb perovskites and robust air and thermal stability. Thin films composed of the Silole‐COOH exhibit superior conductivity and carrier mobility compared to PEDOT: PSS, in addition to reduced nonradiative quasi‐Fermi‐level splitting losses at the HTL/perovskite interface and improved quality of Sn–Pb perovskite. Replacement of PEDOT: PSS with Silole‐COOH leads to 23.2%‐efficient single‐junction Sn–Pb PSCs, 25.8%‐efficient all‐perovskite tandems, and long operating stability in ambient air.


  • High‐Lying Triplet Excitons Utilization of Silole Derivatives Enables their Efficiency Breakthrough in OLEDs

    by Liang Zhang, Linzhong Wang, Kerim Samedov, Mingxing Chen, Dongcheng Chen, Yuanjing Cai

    Siloles are routinely studied in the application of organic light‐emitting diodes (OLEDs) due to their high performances of solid‐state fluorescence property and carrier mobility. The structures of siloles used in electroluminescence device reported so far can only utilize singlet excitons, limiting the device efficiency and commercialization. Seeking to build appliable molecular structures to achieve triplet excitons utilization in silole‐core emitters, two derivatives are designed, Silole‐1DPA‐TRZ and Silole‐1Cz‐TRZ, in which electron acceptor of triazine (TRZ) together with electron donors of diphenylamine (DPA) and carbazole (Cz) modified at 1‐position of silole unit form silole‐D‐A structures. This special molecular design, for the first time, enables triplet excitons harvest via high‐lying reverse intersystem crossing (hRISC) process in silole derivatives with hybridized local and charge‐transfer (HLCT) characteristics. Experimental and theoretical studies show that relative to a stronger charge transfer state of Silole‐1Cz‐TRZ, a more equal local excitation/charge transfer distribution in the HLCT state of Silole‐1DPA‐TRZ is realized, making its application in silole‐based OLED with an efficiency breakthrough of ≈9.1% maximum external quantum efficiency (EQEmax).


  • Open Access

    Simultaneously boosting the conjugation, brightness and solubility of organic fluorophores by using AIEgens

    by Ji Qi, Xingchen Duan, Yuanjing Cai, Shaorui Jia, Chao Chen, Zheng Zhao, Ying Li, Hui-Qing Peng, Ryan T. K. Kwok, Jacky W. Y. Lam, et al.

    Organic near-infrared (NIR) emitters hold great promise for biomedical applications. Yet, most organic NIR fluorophores face the limitations of short emission wavelengths, low brightness, unsatisfactory processability, and the aggregation-caused quenching effect. Therefore, development of effective molecular design strategies to improve these important properties at the same time is a highly pursued topic, but very challenging. Herein, aggregation-induced emission luminogens (AIEgens) are employed as substituents to simultaneously extend the conjugation length, boost the fluorescence quantum yield, and increase the solubility of organic NIR fluorophores, being favourable for biological applications. A series of donor–acceptor type compounds with different substituent groups (i.e., hydrogen, phenyl, and tetraphenylethene (TPE)) are synthesized and investigated. Compared to the other two analogs, MTPE-TP3 with TPE substituents exhibits the reddest fluorescence, highest brightness, and best solubility. Both the conjugated structure and twisted conformation of TPE groups endow the resulting compounds with improved fluorescence properties and processability for biomedical applications. The in vitro and in vivo applications reveal that the NIR nanoparticles function as a potent probe for tumour imaging. This study would provide new insights into the development of efficient building blocks for improving the performance of organic NIR emitters.


  • Open Access

    Free Radical Chemistry of Phosphasilenes

    by Kerim Samedov, Yannic Heider, Yuanjing Cai, Philipp Willmes, Daniel Mühlhausen, Volker Huch, Robert West, David Scheschkewitz, Paul Walter Percival

    Understanding the characteristics of radicals formed from silicon‐containing heavy analogues of alkenes is of great importance for their application in radical polymerization. Steric and electronic substituent effects in compounds such as phosphasilenes not only stabilize the Si=P double bond, but also influence the structure and species of the formed radicals. Herein we report our first investigations of radicals derived from phosphasilenes with Mes, Tip, Dur, and NMe2 substituents on the P atom, using muon spin spectroscopy and DFT calculations. Adding muonium (a light isotope of hydrogen) to phosphasilenes reveals that: a) the electron‐donor NMe2 and the bulkiest Tip‐substituted phosphasilenes form several muoniated radicals with different rotamer conformations; b) bulky Dur‐substituted phosphasilene forms two radicals (Si‐ and P‐centred); and c) Mes‐substituted phosphasilene mainly forms one species of radical, at the P centre. These significant differences result from intramolecular substituent effects.