Gang Luo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gang Luo has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
Peng Zou
Department of Geological Engineering, Faculty of Geosciences and Environmental Engineering, Southwest Jiaotong University, Chengdu 611756, China
6 shared publicationsHanhua Xu
Kunming Prospecting Design Institute of China Nonferrous Metals Industry Co., Ltd, Yunnan 650051, China
5 shared publicationsYuzhang Bi
College of Resources and Environment, Fujian Agriculture and Forestry University, Fuzhou 350002, China
5 shared publications- Weigang Shen
Faculty of Geosciences and Engineering, Southwest Jiaotong University, Chengdu, China
4 shared publications Kun He
Faculty of Geosciences and Engineering, Southwest Jiaotong University, Chengdu, China
3 shared publicationsQian Zhang
Southwest Electric Power Design Institute Co., Ltd. of China Power Engineering Consulting Group 3 Chengdu 610066
3 shared publications
Latest Publications
- Open Access
- 3 August 2026
- Published by GeoScienceWorld in Lithosphere
- Vol. 2026 (3)
A Comparison Study on the Dynamic Response of Rectangular and Circular Pile–Slab Retaining Walls Against Rockfall Impact
Pile–slab retaining wall (PSRW), as an innovative passive protection structure for mitigating rockfalls, has been extensively utilized in the western mountainous regions of China. A typical PSRW is composed of reinforced concrete piles, concrete slabs, and a soil cushion paved in front of piles and slabs. In this study, by using the LS-DYNA, a numerical model is established to evaluate the influence of the cross-sectional shape of piles on the dynamic response of the PSRW against a rockfall impact. In the numerical model, a spherical rock block of various velocities is used to impact two PSRWs of rectangular piles and circular piles. The impact force, the interaction force, the concrete stress, the concrete damage, and the displacement of piles and slabs are summarized and analyzed. The numerical results indicate that the PSRW of rectangular piles demonstrates superior impact resistance capabilities, thereby advocating for the prioritization of rectangular piles in rockfall protection endeavors. The findings of this study can give some new insights for the design of pile–slab retaining wall, especially for the choosing of pile cross-sectional shape.
- 3 August 2026
- Published by GeoScienceWorld in Lithosphere
- Vol. 2026 (3)
Open AccessA Comparison Study on the Dynamic Response of Rectangular and Circular Pile–Slab Retaining Walls Against Rockfall Impact
Pile–slab retaining wall (PSRW), as an innovative passive protection structure for mitigating rockfalls, has been extensively utilized in the western mountainous regions of China. A typical PSRW is composed of reinforced concrete piles, concrete slabs, and a soil cushion paved in front of piles and slabs. In this study, by using the LS-DYNA, a numerical model is established to evaluate the influence of the cross-sectional shape of piles on the dynamic response of the PSRW against a rockfall impact. In the numerical model, a spherical rock block of various velocities is used to impact two PSRWs of rectangular piles and circular piles. The impact force, the interaction force, the concrete stress, the concrete damage, and the displacement of piles and slabs are summarized and analyzed. The numerical results indicate that the PSRW of rectangular piles demonstrates superior impact resistance capabilities, thereby advocating for the prioritization of rectangular piles in rockfall protection endeavors. The findings of this study can give some new insights for the design of pile–slab retaining wall, especially for the choosing of pile cross-sectional shape.
- 18 October 2025
- Published by Elsevier in Computers and Geotechnics
- Vol. 190
Wake evolution and vacuum length in granular flows impacting obstacles: DEM simulations and analytical solutions
- 18 October 2025
- Published by Elsevier in Computers and Geotechnics
- Vol. 190
Wake evolution and vacuum length in granular flows impacting obstacles: DEM simulations and analytical solutions
- 6 August 2025
- Published by Springer Nature in Journal of Mountain Science
- Vol. 22 (8) , 2765-2792
Unveiling dominant factors for gully distribution in wildfire-affected areas using explainable AI: A case study of Xiangjiao catchment, Southwest China
- 6 August 2025
- Published by Springer Nature in Journal of Mountain Science
- Vol. 22 (8) , 2765-2792
Unveiling dominant factors for gully distribution in wildfire-affected areas using explainable AI: A case study of Xiangjiao catchment, Southwest China
- 7 May 2025
- Published by Springer Nature in Natural Hazards
- Vol. 121 (10) , 12353-12369
Discrete element analyses of the dynamic response of granular soil cushion against rockfall inclined impact
- 7 May 2025
- Published by Springer Nature in Natural Hazards
- Vol. 121 (10) , 12353-12369
Discrete element analyses of the dynamic response of granular soil cushion against rockfall inclined impact
- Open Access
- 18 January 2025
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 17 (7) , 4109-4123
Dynamic fragmentation analysis of potential rockfall hazards at Zixia hydropower dam, Qinghai-Tibet Plateau
- 18 January 2025
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 17 (7) , 4109-4123
Open AccessDynamic fragmentation analysis of potential rockfall hazards at Zixia hydropower dam, Qinghai-Tibet Plateau
- Open Access
- 14 October 2024
- Published by Copernicus GmbH in Natural Hazards and Earth System Sciences
- Vol. 24 (10) , 3497-3517
Dynamic response of pile–slab retaining wall structure under rockfall impact
Pile–slab retaining walls, as innovative rockfall protection structures, have been extensively utilized in the western mountainous regions of China. With their characteristics of a small footprint, high interception height, and ease of construction, these structures demonstrate promising potential for application in mountainous regions worldwide, such as the Himalayas, Andes, and Alps. However, their dynamic response upon impact and impact resistance energy remain ambiguous due to the intricate composite nature of the structures. To elucidate this, an exhaustive dynamic analysis of a four-span pile–slab retaining wall with a cantilever section of 6 m under various impact scenarios was conducted utilizing the finite-element numerical simulation method. The rationality of the selected material constitutive models and the numerical algorithm was validated by reproducing two physical model tests. The simulation results reveal the following. (1) The lateral displacement of the pile at the ground surface and the concrete damage under the pile at the impact center are greater than those under the slab at the impact center, implying that the impact location has a significant influence on the stability of the structure. (2) There is a positive correlation between the response indexes (impact force, interaction force, lateral deformation of pile and slab, concrete damage) and the impact velocities. (3) The rockfall peak impact force, the ratio of the peak impact force to the peak interaction force, and lateral displacement of the pile at the ground surface had strong linear relationships with rockfall energy. (4) Relative to the bending moment, shear force, and damage degree, the lateral displacement of the pile at the ground surface is the first to reach its limit value. Taking the lateral displacement of the pile at the ground surface as the controlling factor, the estimated maximum impact energy that the pile–slab retaining wall can withstand is 905 kJ in this study when the structure top is taken as the impact point. In cases where the impact energy of falling rocks exceeds 905 kJ, it is recommended to optimize the mechanical properties of the cushion layer, improve the elastic modulus of concrete, increase the reinforcement ratio of longitudinal tension bars, enlarge the section size of piles at ground level, or add anchoring measures to enhance the bending resistance of the retaining structure.
- 14 October 2024
- Published by Copernicus GmbH in Natural Hazards and Earth System Sciences
- Vol. 24 (10) , 3497-3517
Open AccessDynamic response of pile–slab retaining wall structure under rockfall impact
Pile–slab retaining walls, as innovative rockfall protection structures, have been extensively utilized in the western mountainous regions of China. With their characteristics of a small footprint, high interception height, and ease of construction, these structures demonstrate promising potential for application in mountainous regions worldwide, such as the Himalayas, Andes, and Alps. However, their dynamic response upon impact and impact resistance energy remain ambiguous due to the intricate composite nature of the structures. To elucidate this, an exhaustive dynamic analysis of a four-span pile–slab retaining wall with a cantilever section of 6 m under various impact scenarios was conducted utilizing the finite-element numerical simulation method. The rationality of the selected material constitutive models and the numerical algorithm was validated by reproducing two physical model tests. The simulation results reveal the following. (1) The lateral displacement of the pile at the ground surface and the concrete damage under the pile at the impact center are greater than those under the slab at the impact center, implying that the impact location has a significant influence on the stability of the structure. (2) There is a positive correlation between the response indexes (impact force, interaction force, lateral deformation of pile and slab, concrete damage) and the impact velocities. (3) The rockfall peak impact force, the ratio of the peak impact force to the peak interaction force, and lateral displacement of the pile at the ground surface had strong linear relationships with rockfall energy. (4) Relative to the bending moment, shear force, and damage degree, the lateral displacement of the pile at the ground surface is the first to reach its limit value. Taking the lateral displacement of the pile at the ground surface as the controlling factor, the estimated maximum impact energy that the pile–slab retaining wall can withstand is 905 kJ in this study when the structure top is taken as the impact point. In cases where the impact energy of falling rocks exceeds 905 kJ, it is recommended to optimize the mechanical properties of the cushion layer, improve the elastic modulus of concrete, increase the reinforcement ratio of longitudinal tension bars, enlarge the section size of piles at ground level, or add anchoring measures to enhance the bending resistance of the retaining structure.
- 27 July 2024
- Published by Springer Nature in Journal of Mountain Science
- Vol. 21 (12) , 3971-3985
Influence of barrier shape on impact dynamics of debris flow entraining a boulder onto rigid barriers
- 27 July 2024
- Published by Springer Nature in Journal of Mountain Science
- Vol. 21 (12) , 3971-3985
Influence of barrier shape on impact dynamics of debris flow entraining a boulder onto rigid barriers
- 13 April 2024
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 83 (5) , 1-17
InSAR-derived predisaster spatio-temporal evolution of a reactivated landslide
- 13 April 2024
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 83 (5) , 1-17
InSAR-derived predisaster spatio-temporal evolution of a reactivated landslide
- Open Access
- 13 February 2024
- Published by Copernicus GmbH
- Vol. 2023, 1-24
Reply on RC2
The numerical experiments investigate the dynamic response of a pile-slab retaining wall under the impact of rockfall. Firstly, a full-scale numerical model of a four-span pile-slab retaining wall satisfying specification requirements is established. Secondly, the numerical experiments investigate the dynamic response of a pile-slab retaining wall under different impact centers and velocities. Finally, the maximum impact energy that the structure can resist is predicted. Results reveal that: (1) During the impact process, the stress, strain, and concrete damage of the structure gradually spread from the impact center to the entire structure and ultimately result in permanent deformation; (2) The lateral displacement of pile at ground surface and the number of damage failure units under the pile as the impact center is greater than those under the slab as impact center. It shows that the impact position has a significant effect on the stability of the structure.(3) The impact force, interaction force, lateral displacement of pile at ground surface, and concrete damage is increased with the increase of impact velocity. Under pile as the impact center (slab as the impact center), when the velocity increases from 15 m/s to 30 m/s, the impact force increases by 1.42, 1.91, and 2.41 times (1.41, 1.90, and 2.41 times), the interaction force increases by 1.25, 1.47, and 1.68 times (1.24, 1.47, and 1.68 times), and the maximum lateral displacement of pile at ground surface increases by 1.57, 2.24, and 3 times (1.55, 2.23, and 3 times). (4) Utilizing this relationship between the impact velocity and the maximum lateral displacement of pile at ground surface, the estimated maximum impact energy that the pile-slab retaining wall can withstand is 905 kJ in this study when the structure top is taken as the impact point. Impact resistance of the structure optimized 1.814 times compared to traditional reinforced concrete retaining walls.
- 13 February 2024
- Published by Copernicus GmbH
- Vol. 2023, 1-24
Open AccessReply on RC2
The numerical experiments investigate the dynamic response of a pile-slab retaining wall under the impact of rockfall. Firstly, a full-scale numerical model of a four-span pile-slab retaining wall satisfying specification requirements is established. Secondly, the numerical experiments investigate the dynamic response of a pile-slab retaining wall under different impact centers and velocities. Finally, the maximum impact energy that the structure can resist is predicted. Results reveal that: (1) During the impact process, the stress, strain, and concrete damage of the structure gradually spread from the impact center to the entire structure and ultimately result in permanent deformation; (2) The lateral displacement of pile at ground surface and the number of damage failure units under the pile as the impact center is greater than those under the slab as impact center. It shows that the impact position has a significant effect on the stability of the structure.(3) The impact force, interaction force, lateral displacement of pile at ground surface, and concrete damage is increased with the increase of impact velocity. Under pile as the impact center (slab as the impact center), when the velocity increases from 15 m/s to 30 m/s, the impact force increases by 1.42, 1.91, and 2.41 times (1.41, 1.90, and 2.41 times), the interaction force increases by 1.25, 1.47, and 1.68 times (1.24, 1.47, and 1.68 times), and the maximum lateral displacement of pile at ground surface increases by 1.57, 2.24, and 3 times (1.55, 2.23, and 3 times). (4) Utilizing this relationship between the impact velocity and the maximum lateral displacement of pile at ground surface, the estimated maximum impact energy that the pile-slab retaining wall can withstand is 905 kJ in this study when the structure top is taken as the impact point. Impact resistance of the structure optimized 1.814 times compared to traditional reinforced concrete retaining walls.
- Open Access
- 13 February 2024
- Published by Copernicus GmbH
- Vol. 2023, 1-24
Reply on RC1
The numerical experiments investigate the dynamic response of a pile-slab retaining wall under the impact of rockfall. Firstly, a full-scale numerical model of a four-span pile-slab retaining wall satisfying specification requirements is established. Secondly, the numerical experiments investigate the dynamic response of a pile-slab retaining wall under different impact centers and velocities. Finally, the maximum impact energy that the structure can resist is predicted. Results reveal that: (1) During the impact process, the stress, strain, and concrete damage of the structure gradually spread from the impact center to the entire structure and ultimately result in permanent deformation; (2) The lateral displacement of pile at ground surface and the number of damage failure units under the pile as the impact center is greater than those under the slab as impact center. It shows that the impact position has a significant effect on the stability of the structure.(3) The impact force, interaction force, lateral displacement of pile at ground surface, and concrete damage is increased with the increase of impact velocity. Under pile as the impact center (slab as the impact center), when the velocity increases from 15 m/s to 30 m/s, the impact force increases by 1.42, 1.91, and 2.41 times (1.41, 1.90, and 2.41 times), the interaction force increases by 1.25, 1.47, and 1.68 times (1.24, 1.47, and 1.68 times), and the maximum lateral displacement of pile at ground surface increases by 1.57, 2.24, and 3 times (1.55, 2.23, and 3 times). (4) Utilizing this relationship between the impact velocity and the maximum lateral displacement of pile at ground surface, the estimated maximum impact energy that the pile-slab retaining wall can withstand is 905 kJ in this study when the structure top is taken as the impact point. Impact resistance of the structure optimized 1.814 times compared to traditional reinforced concrete retaining walls.
- 13 February 2024
- Published by Copernicus GmbH
- Vol. 2023, 1-24
Open AccessReply on RC1
The numerical experiments investigate the dynamic response of a pile-slab retaining wall under the impact of rockfall. Firstly, a full-scale numerical model of a four-span pile-slab retaining wall satisfying specification requirements is established. Secondly, the numerical experiments investigate the dynamic response of a pile-slab retaining wall under different impact centers and velocities. Finally, the maximum impact energy that the structure can resist is predicted. Results reveal that: (1) During the impact process, the stress, strain, and concrete damage of the structure gradually spread from the impact center to the entire structure and ultimately result in permanent deformation; (2) The lateral displacement of pile at ground surface and the number of damage failure units under the pile as the impact center is greater than those under the slab as impact center. It shows that the impact position has a significant effect on the stability of the structure.(3) The impact force, interaction force, lateral displacement of pile at ground surface, and concrete damage is increased with the increase of impact velocity. Under pile as the impact center (slab as the impact center), when the velocity increases from 15 m/s to 30 m/s, the impact force increases by 1.42, 1.91, and 2.41 times (1.41, 1.90, and 2.41 times), the interaction force increases by 1.25, 1.47, and 1.68 times (1.24, 1.47, and 1.68 times), and the maximum lateral displacement of pile at ground surface increases by 1.57, 2.24, and 3 times (1.55, 2.23, and 3 times). (4) Utilizing this relationship between the impact velocity and the maximum lateral displacement of pile at ground surface, the estimated maximum impact energy that the pile-slab retaining wall can withstand is 905 kJ in this study when the structure top is taken as the impact point. Impact resistance of the structure optimized 1.814 times compared to traditional reinforced concrete retaining walls.