DYDan Yang

Dan Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dan Yang has a total of 49 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • In SituStudy of Order Formation in Mesoporous Titania Thin Films Templated by a Diblock Copolymer during Slot-Die Printing

    by Nian Li, Wei Chen, Lin Song, Renjun Guo, Manuel A. Scheel, Dan Yang, Volker Körstgens, Matthias Schwartzkopf, Stephan V. Roth, Peter Müller-Buschbaum

    Slot-die printing, a large-scale deposition technique, is applied to fabricate mesoporous titania films. Printing is interesting, for example, for scaling up solar cells where titania films with an interconnected mesoporous network and a large surface-to-volume ratio are desired as photoanodes. A fundamental understanding of the structure evolution during printing is of high significance in tailoring these films. In this work, we provide important insights into the self-assembly of the slot-die-printed titania/polystyrene-block-poly(ethylene oxide) (PS-b-PEO) micelles into ordered hybrid structures in real time via in situ grazing-incidence small-angle X-ray scattering (GISAXS). GISAXS allows for tracking both vertical and lateral structure development of the film formation process. In the hybrid film, a face-centered cubic (FCC) structure is preferentially formed at the interfaces with air and with the substrate, while a defect-rich mixed FCC and body-centered cubic (BCC) structure forms in the bulk. After calcination, the surface and inner morphologies of the obtained nanostructured titania films are compared with the spin-coated analogues. In the printed films, the initially formed nanoscale structure of the hybrid film is preserved, and the resulting mesoporous titania film shows a superior order as compared with the spin-coated thin films which can be beneficial for future applications.


  • Internal nanoscale architecture and charge carrier dynamics of wide bandgap non-fullerene bulk heterojunction active layers in organic solar cells

    by Xinyu Jiang, Hongwon Kim, Peter S. Deimel, Wei Chen, Wei Cao, Dan Yang, Shanshan Yin, Roy Schaffrinna, Francesco Allegretti, Johannes V. Barth, et al.

    The nanoscale architecture of active layer based on wide bandgap non-fullerene solar cells exhibits pronounced influence by the solvent additive.


  • Tailoring Morphology Compatibility and Device Stability by Adding PBDTTPD-COOH as Third Component to Fullerene-Based Polymer Solar Cells

    by Dan Yang, Bing Cao, Volker Körstgens, Nitin Saxena, Nian Li, Christoph Bilko, Sebastian Grott, Wei Chen, Xinyu Jiang, Julian Eliah Heger, et al.


  • Structure and Charge Carrier Dynamics in Colloidal PbS Quantum Dot Solids

    by Wei Chen, Jialin Zhong, Junzi Li, Nitin Saxena, Lucas P. Kreuzer, Haochen Liu, Lin Song, Bo Su, Dan Yang, Kun Wang, et al.

    The ligand exchange process is a key step in fabrications of quantum dot (QD) optoelectronic devices. In this work, based on grazing incidence X-ray scattering techniques, we find that the ligand exchange process with halide ions changes the PbS QD superlattice from a face-centered cubic to body-centered cubic stacking, while the QD crystal lattice orientation also changes from preferentially “edge-up” to “corner-up”. Thus, the QDs’ shape is supposed to be the main factor for the alignment of QDs in close packed solids. Moreover, we tailor the alignment of the close packed solids by thermal treatments, and further investigate their inner charge carrier dynamics by pump-probe transient absorption experiments. An overall better structure alignment optimizes the charge carrier-hopping rate, as confirmed by the time dependence of the photon bleaching peak-shift. The QD solid treated at 100 °C shows the best inner structure alignment with the best charge carrier-hopping rate.


  • Ionic Liquids as Post-Treatment Agents for Simultaneous Improvement of Seebeck Coefficient and Electrical Conductivity in PEDOT:PSS Films

    by Nitin Saxena, Benjamin Pretzl, Xaver Lamprecht, Lorenz Bießmann, Dan Yang, Nian Li, Christoph Bilko, Sigrid Bernstorff, Peter Müller-Buschbaum

    In this study, ionic liquid (IL) post-treatment for thin films of poly(3,4-ethylene dioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) is employed for the simultaneous enhancement of Seebeck coefficients and electrical conductivities. Through systematic variation of the ILs, by changing the anions while keeping the cation unchanged, changes in thermoelectric, spectroscopic and morphological properties are investigated by means of UV-Vis-spectroscopy and grazing-incidence wide-angle x-ray scattering (GIWAXS) as function of the IL concentration. The simultaneous enhancement in the two important thermoelectric properties is ascribed to the binary nature of the ILs, which complements that of PEDOT:PSS. The anions of the ILs primarily interact with the positively-charged, conducting PEDOT, while the cations interact with negatively-charged insulating PSS. Therefore, post-treatment with ILs allows for primary and secondary doping of PEDOT:PSS at the same time. Differences in the obtained Seebeck coefficients for the investigated ILs are ascribed to the chemical properties of the anions. Additionally, the choice of the latter has implications on the morphology of the treated PEDOT:PSS films regarding average π-π-stacking distances of PEDOT chains, PEDOT-to-PSS ratios and edge-on-to-face-on ratios, influencing charge transport properties macroscopically. A morphological model is presented, highlighting the influence of each IL in comparison with pristine PEDOT:PSS films.


  • In-Operando Study of the Effects of Solvent Additives on the Stability of Organic Solar Cells Based on PTB7-Th:PC71BM

    by Dan Yang, Franziska Carina Löhrer, Volker Körstgens, Armin Schreiber, Sigrid Bernstorff, Jillian M. Buriak, Peter Müller-Buschbaum


  • Composition–Morphology Correlation in PTB7-Th/PC71BM Blend Films for Organic Solar Cells

    by Lin Song, Weijia Wang, Edoardo Barabino, Dan Yang, Volker Körstgens, Peng Zhang, Stephan V. Roth, Peter Müller-Buschbaum

    From a morphological perspective, the understanding of the influence of the [6,6]-phenyl C71-butyric acid methyl ester (PC71BM) content on the morphology of the active layer is not complete in organic solar cells (OSCs) with bulk heterojunction (BHJ) configuration based on the low-bandgap polymer poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2- b;4,5- b']dithiophene-2,6-diyl- alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4- b]thiophene-)-2-carboxylate-2-6-diyl] (PTB7-Th). In this work, we obtain the highest power conversion efficiency (PCE) of 10.5% for BHJ organic solar cells (OSCs) with a PTB7-Th/PC71BM weight ratio of 1:1.5. To understand the differences in PCEs caused by the PC71BM content, we investigate the morphology of PTB7-Th/PC71BM blend films in detail by determining the domain sizes, the polymer crystal structure, optical properties, and vertical composition as a function of the PC71BM concentration. The surface morphology is examined with atomic force microscopy, and the inner film morphology is probed with grazing incidence small-angle X-ray scattering. The PTB7-Th crystal structure is characterized with grazing incidence wide-angle X-ray scattering and UV/vis spectroscopy. X-ray reflectivity is employed to yield information about the film vertical composition. The results show that in PTB7-Th/PC71BM blend films, the increase of PC71BM content leads to an enhanced microphase separation and a decreased polymer crystallinity. Moreover, a high PC71BM concentration is found to decrease the polymer domain sizes and crystal sizes and to promote polymer conjugation length and formation of fullerene-rich and/or polymer-rich layers. The differences in photovoltaic performance are well explained by these findings.


  • Open Access

    Low-voltage pentacene photodetector based on a vertical transistor configuration

    by Yang Dan, Zhang Li, Yang Sheng-Yi, Zou Bing-Suo

    Due to the excellent characteristics of field-effect transistor and its high absorption coefficient in the visible region, pentacene has been widely used in phototransistors. The channel length of the vertical transistor could be designed to be very short (on the order of nanometers). In this way, the device performances and its working frequency can be effectively improved, and the energy consumption can be reduced simultaneously. In this paper, we fabricate a kind of low-voltage pentacene photodetector ITO(S)/Pentacene/Al(G)/Pentacene/Au(D), based on the vertical transistor configuration. The threshold voltage and “on/off” current ratio are -0.9 V and 104 at a low working-voltage of -3 V, respectively. The pentacene photodetector ITO/Pentacene(80 nm)/Al(15 nm)/Pentacene (80 nm)/Au exhibits a good p-type transistor behavior and low-voltage-controlling performance. The photosensitivity and responsivity vary with incident monochromatic light from 350 nm to 750 nm, and the photosensitivity peak of 308 is obtained at 350 nm with a responsivity of 219 mA·W-1, which is even higher than that of the standard Si-based photodetector under 350 nm incident light. Therefore, this work provides an easy way to fabricate a high sensitivity all-organic photodetector working at low voltages.