Nibal Fadel Farman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nibal Fadel Farman has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
Bdoor Majed Ahmed
University of Baghdad, Energy Engineering Department, Baghdad, Iraq
2 shared publications- Zeina Ali Abdul Redha
Energy Engineering Department, University of Baghdad, Baghdad 10011, Iraq
2 shared publications - Mena Safaa Mohammed
Department of Energy, Engineering College, University of Baghdad, Iraq
1 shared publication Nadia H Al-Maamory
University of Baghdad
1 shared publicationShaymaa A. Mahdi
Energy Engineering Dept., University of Baghdad, Baghdad, Iraq
1 shared publicationShaymaa Alasadi
Baghdad
1 shared publication
Latest Publications
- Open Access
- 27 June 2024
- Published by International Information and Engineering Technology Association in International Journal of Heat and Technology
- Vol. 42 (3) , 832-850
Dimensioning of a Solar Adsorption-Powered Cooling Bed for Generating Relief Cooling
- 27 June 2024
- Published by International Information and Engineering Technology Association in International Journal of Heat and Technology
- Vol. 42 (3) , 832-850
Open AccessDimensioning of a Solar Adsorption-Powered Cooling Bed for Generating Relief Cooling
- Open Access
- 14 March 2024
- Published by Center of Biomass and Renewable Energy Scientia Academy in International Journal of Renewable Energy Development
- Vol. 13 (3) , 430-447
Solar adsorption cooling system operating by activated–carbon–ethanol bed
Solar adsorption cooling system operating by activated–carbon–ethanol bed
- 14 March 2024
- Published by Center of Biomass and Renewable Energy Scientia Academy in International Journal of Renewable Energy Development
- Vol. 13 (3) , 430-447
Open AccessSolar adsorption cooling system operating by activated–carbon–ethanol bed
Solar adsorption cooling system operating by activated–carbon–ethanol bed
- Open Access
- 31 December 2023
- Published by International Information and Engineering Technology Association in International Journal of Heat and Technology
- Vol. 41 (6) , 1645-1654
Sizing the Nuclear Reactor by Critical Mass Calculation for a Spherical Reactor Case Study
- 31 December 2023
- Published by International Information and Engineering Technology Association in International Journal of Heat and Technology
- Vol. 41 (6) , 1645-1654
Open AccessSizing the Nuclear Reactor by Critical Mass Calculation for a Spherical Reactor Case Study
- Open Access
- 1 July 2023
- Published by Journal of Engineering in Journal of Engineering
- Vol. 29 (7) , 71-85
Performance of Solar Adsorption Cooling System Using Methanol and Activated Carbon as a Working Pair
The need for renewable energy sources is higher than ever due to rising global warming, climate change, and ozone depletion. For refrigeration and air conditioning applications, adsorption refrigeration systems are viable alternatives cooling techniques. This study is a topic and part of the M.Sc. thesis. A field solar-powered ice maker unit was created, studied, tested, and evaluated on the 13th and 30th of May, 2022. Activated carbon and methanol pair was used to set up a refrigeration system in Baghdad (Al Dora). Experimental tests were carried out outdoors to determine the coefficient of performance COP and specific cooling power SCP of the system. The results showed that the lowest temperature obtained at the evaporative surface was (4 oC) and (3 oC) for the 13th and 30th of May, respectively, at the opening time of the valve between the evaporator and the generator at 9 pm. In addition, the amounts of methanol condensate were (0.340 kg) and (0.344 kg) for the 13th and 30th of May, respectively, while the maximum cycle coefficient of performance (COP) and specific cooling power SCP are about 0.57 and 0.14 kW/kga.c , respectively
- 1 July 2023
- Published by Journal of Engineering in Journal of Engineering
- Vol. 29 (7) , 71-85
Open AccessPerformance of Solar Adsorption Cooling System Using Methanol and Activated Carbon as a Working Pair
The need for renewable energy sources is higher than ever due to rising global warming, climate change, and ozone depletion. For refrigeration and air conditioning applications, adsorption refrigeration systems are viable alternatives cooling techniques. This study is a topic and part of the M.Sc. thesis. A field solar-powered ice maker unit was created, studied, tested, and evaluated on the 13th and 30th of May, 2022. Activated carbon and methanol pair was used to set up a refrigeration system in Baghdad (Al Dora). Experimental tests were carried out outdoors to determine the coefficient of performance COP and specific cooling power SCP of the system. The results showed that the lowest temperature obtained at the evaporative surface was (4 oC) and (3 oC) for the 13th and 30th of May, respectively, at the opening time of the valve between the evaporator and the generator at 9 pm. In addition, the amounts of methanol condensate were (0.340 kg) and (0.344 kg) for the 13th and 30th of May, respectively, while the maximum cycle coefficient of performance (COP) and specific cooling power SCP are about 0.57 and 0.14 kW/kga.c , respectively
- Open Access
- 31 March 2020
- Published by Society of Engineering Colleges and Institutes in Association of Arab Universities Journal of Engineering Sciences
- Vol. 27 (1) , 54-64
Experimental and Theoretical Analysis of a Mono PV Cell with Five Parameters, Simulation Model Compatible with Iraqi Climate
The present work included study of the effects of weather conditions such as solar radiation and ambient temperature on solar panels (monocrystalline 30 Watts) via proposed mathematical model, MATLAB_Simulation was used by scripts file to create a special code to solve the mathematical model , The latter is single –diode model (Five parameter) ,Where the effect of ambient temperature and solar radiation on the output of the solar panel was studied, the Newton Raphson method was used to find the output current of the solar panel and plot P-V ,I-V curves, the performance of the PV was determined at Standard Test Condition (STC) (1000W/m2)and a comparison between theoretical and experimental results were done .The best efficiency ranging from 0.15 to 0.16. With a particularly, error about (-0.333) for experimental power (30 Watt) comparing with theoretical power (30.1), through these results it is concluded the validity of the proposed model. This model can be used for all types of photovoltaic panels and also with larger output power.
- 31 March 2020
- Published by Society of Engineering Colleges and Institutes in Association of Arab Universities Journal of Engineering Sciences
- Vol. 27 (1) , 54-64
Open AccessExperimental and Theoretical Analysis of a Mono PV Cell with Five Parameters, Simulation Model Compatible with Iraqi Climate
The present work included study of the effects of weather conditions such as solar radiation and ambient temperature on solar panels (monocrystalline 30 Watts) via proposed mathematical model, MATLAB_Simulation was used by scripts file to create a special code to solve the mathematical model , The latter is single –diode model (Five parameter) ,Where the effect of ambient temperature and solar radiation on the output of the solar panel was studied, the Newton Raphson method was used to find the output current of the solar panel and plot P-V ,I-V curves, the performance of the PV was determined at Standard Test Condition (STC) (1000W/m2)and a comparison between theoretical and experimental results were done .The best efficiency ranging from 0.15 to 0.16. With a particularly, error about (-0.333) for experimental power (30 Watt) comparing with theoretical power (30.1), through these results it is concluded the validity of the proposed model. This model can be used for all types of photovoltaic panels and also with larger output power.
- Open Access
- 21 August 2019
- Published by Ital Publication in Civil Engineering Journal
- Vol. 5 (8) , 1832-1840
Optimum Efficiency of PV Panel Using Genetic Algorithms to Touch Proximate Zero Energy House (NZEH)
By optimizing the efficiency of a modular simulation model of the PV module structure by genetic algorithm, under several weather conditions, as a portion of recognizing the ideal plan of a Near Zero Energy Household (NZEH), an ideal life cycle cost can be performed. The optimum design from combinations of NZEH-variable designs, are construction positioning, window-to-wall proportion, and glazing categories, which will help maximize the energy created by photovoltaic panels. Comprehensive simulation technique and modeling are utilized in the solar module I-V and for P-V output power. Both of them are constructed on the famous five-parameter model. In addition, the efficiency of the PV panel is established by the genetic algorithm under the standard test conditions (STC) and a comparison between the theoretical and experimental results is done to achieve maximum performance ranging from 0.15 to 0.16, particularly with an error of about - 0.333 for an experimental power of 30 Watts compared with the theoretical power of 30.1 Watts. The results obtained by the genetic algorithm give the best value for efficiency at the range of 16% to 17% of solar radiation, from 500–600 W/m2. These values are almost identical to the efficiency obtained from the results of the operation, where the best value for efficiency in the experimental results was seen to be 15.7%.
- 21 August 2019
- Published by Ital Publication in Civil Engineering Journal
- Vol. 5 (8) , 1832-1840
Open AccessOptimum Efficiency of PV Panel Using Genetic Algorithms to Touch Proximate Zero Energy House (NZEH)
By optimizing the efficiency of a modular simulation model of the PV module structure by genetic algorithm, under several weather conditions, as a portion of recognizing the ideal plan of a Near Zero Energy Household (NZEH), an ideal life cycle cost can be performed. The optimum design from combinations of NZEH-variable designs, are construction positioning, window-to-wall proportion, and glazing categories, which will help maximize the energy created by photovoltaic panels. Comprehensive simulation technique and modeling are utilized in the solar module I-V and for P-V output power. Both of them are constructed on the famous five-parameter model. In addition, the efficiency of the PV panel is established by the genetic algorithm under the standard test conditions (STC) and a comparison between the theoretical and experimental results is done to achieve maximum performance ranging from 0.15 to 0.16, particularly with an error of about - 0.333 for an experimental power of 30 Watts compared with the theoretical power of 30.1 Watts. The results obtained by the genetic algorithm give the best value for efficiency at the range of 16% to 17% of solar radiation, from 500–600 W/m2. These values are almost identical to the efficiency obtained from the results of the operation, where the best value for efficiency in the experimental results was seen to be 15.7%.
- 1 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Optimization the efficiency of continuous solar adsorption refrigeration system with genetic algorithm
The optimum performance of the continuous Solar Adsorption Refrigeration System unit with Genetic Algorithms (GA) is performed. The adsorption bed (generator) is the heart of the system and it has the greatest effect on the performance of the system. A good design of the generator leads to smooth operation and better results, so more attention must be paid towards the design influence on the performance of the system, with respect to many factors that have an effect on the performance of adsorptive solar ice maker unit. These factors contain Geometrical factors, Concentration factor Operating factors and Climatic factors. Which play an essential role on the designed, constructed, tests and optimized the solar adsorption refrigeration system in order to confirm and achieve the possibility of the principles of solar adsorption refrigeration system and assess the amount of methanol percentage to the amount of activated carbon (A.C). A field solar powered of ice maker unit designed, analyzed, built and tested, this unit was tested during three months from May till August 2012. The maximum (COP) of the solar adsorption system was 0.49 by ordinary calculation and 0.4883 by Genetic Optimization so there is compatible agreement between the classical method and Genetic Optimization. The concentration ratio X0 kg Methanol/kg (A.C) of the present solar adsorption system was 0.29 as a result of the experimental work and 0.286 by genetic optimization. The maximum mass desorbed is approximately 600 g / 3 kg (A.C) which is a good quality for forming 1 kg of ice, when the average solar radiation in Iraq was 900 W/m2.
- 1 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Optimization the efficiency of continuous solar adsorption refrigeration system with genetic algorithm
The optimum performance of the continuous Solar Adsorption Refrigeration System unit with Genetic Algorithms (GA) is performed. The adsorption bed (generator) is the heart of the system and it has the greatest effect on the performance of the system. A good design of the generator leads to smooth operation and better results, so more attention must be paid towards the design influence on the performance of the system, with respect to many factors that have an effect on the performance of adsorptive solar ice maker unit. These factors contain Geometrical factors, Concentration factor Operating factors and Climatic factors. Which play an essential role on the designed, constructed, tests and optimized the solar adsorption refrigeration system in order to confirm and achieve the possibility of the principles of solar adsorption refrigeration system and assess the amount of methanol percentage to the amount of activated carbon (A.C). A field solar powered of ice maker unit designed, analyzed, built and tested, this unit was tested during three months from May till August 2012. The maximum (COP) of the solar adsorption system was 0.49 by ordinary calculation and 0.4883 by Genetic Optimization so there is compatible agreement between the classical method and Genetic Optimization. The concentration ratio X0 kg Methanol/kg (A.C) of the present solar adsorption system was 0.29 as a result of the experimental work and 0.286 by genetic optimization. The maximum mass desorbed is approximately 600 g / 3 kg (A.C) which is a good quality for forming 1 kg of ice, when the average solar radiation in Iraq was 900 W/m2.
- Open Access
- 22 September 2017
- Published by Foundation of Computer Science in International Journal of Computer Applications
- Vol. 173 (10) , 18-25
Genetic Optimization of the Performance of the Solar Adsorption Refrigeration System for Iraq Climate
- 22 September 2017
- Published by Foundation of Computer Science in International Journal of Computer Applications
- Vol. 173 (10) , 18-25
Open AccessGenetic Optimization of the Performance of the Solar Adsorption Refrigeration System for Iraq Climate