Laurent Jolivet
Research Subjects
Laurent Jolivet has a total of 176 co-authors. Here are the top co-authors by number of shared publications:
- Armel Menant
Université Côte d’Azur, CNRS, Observatoire de la Côte d’Azur, IRD, Géoazur, Valbonne, France
11 shared publications Romain Augier
11 shared publications- Eloïse Bessière
ISTEP
8 shared publications - Laurent Arbaret
Université d’Orléans, ISTO, UMR 7327, 45071, Orléans, France
8 shared publications - Romain Augier
ISTO
7 shared publications - Taylor F. Schildgen
GFZ Helmholtz Center for Geosciences, 14473 Potsdam, Germany
7 shared publications
Latest Publications
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Spatial extent of deep slab slicing events: Insights from the Phyllite-Quartzite paleo-accretionary wedge (Hellenic subduction zone)
The transfer of material from the downgoing plate to the overriding plate at depth exerts a first-order control on the mechanical and thermal evolution of subduction zones. However, the geometry, size, and temporal organization of deep tectonic slices formed during basal accretion remain poorly constrained, due to the limited resolution of geophysical imaging and the rarity of geological analogues preserving deep accretionary architectures formed during continental subduction.Here, we investigate the spatial extent and stacking dynamics of tectonic slices by reconstructing the architecture of the deep paleo-accretionary wedge through the study of the exhumed Phyllite-Quartzite (PQ) nappe, derived from microcontinental protoliths, which was formed by basal accretion during the Oligo-Miocene along the Hellenic subduction zone. We carried out a multidisciplinary study of this now-exhumed PQ nappe, which crops out discontinuously from Crete to the Peloponnese (Greece). Preserved in a fore-arc position and weakly overprinted by later tectonic events, this natural laboratory provides direct access to deep accretionary processes.An integrated petro-structural study conducted across southeastern Peloponnese and Kythira combines detailed mapping, structural analysis, petrological observations, Raman spectroscopy of carbonaceous material, and thermobarometric modeling. This approach allows us to distinguish several tectono-metamorphic sub-units within the PQ nappe stack, each recording a distinct P-T evolution that constrains the depth of basal accretion for successive episodes. Hypotheses of lateral continuity between these sub-units provide first-order constraints on their present-day spatial extent and on the minimum size of individual accretionary slices.In southeastern Peloponnese, two HP-LT sub-units are identified within the PQ nappe stack, while at least two equivalent sub-units are recognized on Kythira. These sub-units record a systematic increase in peak temperature from the base to the top of the HP-LT nappe stack, consistent with successive episodes of basal accretion. Reconstructed P-T conditions indicate that basal accretion occurred at depths of ~50-60 km along the subduction interface. Based on spatial correlations between structurally equivalent HP–LT sub-units exposed in neighboring regions along strike, we infer a minimum present-day lateral continuity of individual accretionary slices. On this basis, deep tectonic slices formed during basal accretion are inferred to currently extend over several tens of kilometers in the trench-perpendicular direction and up to a hundred kilometers along strike.This study provides new quantitative constraints on the depth, lateral extent, and dynamics of tectonic underplating, with direct relevance for the Hellenic margin, where such processes may still be active, and for active subduction zones worldwide.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessSpatial extent of deep slab slicing events: Insights from the Phyllite-Quartzite paleo-accretionary wedge (Hellenic subduction zone)
The transfer of material from the downgoing plate to the overriding plate at depth exerts a first-order control on the mechanical and thermal evolution of subduction zones. However, the geometry, size, and temporal organization of deep tectonic slices formed during basal accretion remain poorly constrained, due to the limited resolution of geophysical imaging and the rarity of geological analogues preserving deep accretionary architectures formed during continental subduction.Here, we investigate the spatial extent and stacking dynamics of tectonic slices by reconstructing the architecture of the deep paleo-accretionary wedge through the study of the exhumed Phyllite-Quartzite (PQ) nappe, derived from microcontinental protoliths, which was formed by basal accretion during the Oligo-Miocene along the Hellenic subduction zone. We carried out a multidisciplinary study of this now-exhumed PQ nappe, which crops out discontinuously from Crete to the Peloponnese (Greece). Preserved in a fore-arc position and weakly overprinted by later tectonic events, this natural laboratory provides direct access to deep accretionary processes.An integrated petro-structural study conducted across southeastern Peloponnese and Kythira combines detailed mapping, structural analysis, petrological observations, Raman spectroscopy of carbonaceous material, and thermobarometric modeling. This approach allows us to distinguish several tectono-metamorphic sub-units within the PQ nappe stack, each recording a distinct P-T evolution that constrains the depth of basal accretion for successive episodes. Hypotheses of lateral continuity between these sub-units provide first-order constraints on their present-day spatial extent and on the minimum size of individual accretionary slices.In southeastern Peloponnese, two HP-LT sub-units are identified within the PQ nappe stack, while at least two equivalent sub-units are recognized on Kythira. These sub-units record a systematic increase in peak temperature from the base to the top of the HP-LT nappe stack, consistent with successive episodes of basal accretion. Reconstructed P-T conditions indicate that basal accretion occurred at depths of ~50-60 km along the subduction interface. Based on spatial correlations between structurally equivalent HP–LT sub-units exposed in neighboring regions along strike, we infer a minimum present-day lateral continuity of individual accretionary slices. On this basis, deep tectonic slices formed during basal accretion are inferred to currently extend over several tens of kilometers in the trench-perpendicular direction and up to a hundred kilometers along strike.This study provides new quantitative constraints on the depth, lateral extent, and dynamics of tectonic underplating, with direct relevance for the Hellenic margin, where such processes may still be active, and for active subduction zones worldwide.
- Open Access
- 14 February 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (2)
Numerical Modeling of Purely Active (Plume‐Produced) Continental Rifting and Break‐Up
In contrast to the traditional mechanism of passive continental rifting (driven by far‐field tectonic forces), the active rifting‐to‐break‐up processes (caused by rising mantle plumes) are still poorly understood. However, most episodes of fragmentation of the last supercontinent Pangea were relatively shortly preceded (within ∼10 Myr) by the emplacement of Large Igneous Provinces, indicating that a link between lithospheric ruptures and mantle plumes is very close and frequent. In this study, we present a systematic numerical modeling of purely active continental rifting and break‐up, that is, without far‐field extension, examining the following parameters: (a) the thermo‐rheological structure of the lithosphere, (b) the buoyancy of the thermo‐chemical mantle plume anomaly, and (c) the duration of the incoming plume flux. Thermo‐mechanical experiments show that a classic active rifting scenario, involving the complete break‐up of the lithosphere within less than 10 Myr following the arrival of a mantle plume, is achievable, though only under specific conditions. These include: (a) a continuously fed plume with an elevated thermal and/or compositional density deficit ( ≤ −30 kg m −3 ) and (b) a relatively warm overlying continental plate, characterized by an above‐average Moho temperature ( = 750°C). Although both prerequisites do not seem entirely unrealistic, their simultaneous occurrence in the Phanerozoic Earth is unlikely. We therefore conclude that for a successful transition to lithospheric break‐up, plume‐activated continental rifting events in the Mesozoic–Cenozoic time must be accompanied by external tectonic stresses.
- 14 February 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (2)
Open AccessNumerical Modeling of Purely Active (Plume‐Produced) Continental Rifting and Break‐Up
In contrast to the traditional mechanism of passive continental rifting (driven by far‐field tectonic forces), the active rifting‐to‐break‐up processes (caused by rising mantle plumes) are still poorly understood. However, most episodes of fragmentation of the last supercontinent Pangea were relatively shortly preceded (within ∼10 Myr) by the emplacement of Large Igneous Provinces, indicating that a link between lithospheric ruptures and mantle plumes is very close and frequent. In this study, we present a systematic numerical modeling of purely active continental rifting and break‐up, that is, without far‐field extension, examining the following parameters: (a) the thermo‐rheological structure of the lithosphere, (b) the buoyancy of the thermo‐chemical mantle plume anomaly, and (c) the duration of the incoming plume flux. Thermo‐mechanical experiments show that a classic active rifting scenario, involving the complete break‐up of the lithosphere within less than 10 Myr following the arrival of a mantle plume, is achievable, though only under specific conditions. These include: (a) a continuously fed plume with an elevated thermal and/or compositional density deficit ( ≤ −30 kg m −3 ) and (b) a relatively warm overlying continental plate, characterized by an above‐average Moho temperature ( = 750°C). Although both prerequisites do not seem entirely unrealistic, their simultaneous occurrence in the Phanerozoic Earth is unlikely. We therefore conclude that for a successful transition to lithospheric break‐up, plume‐activated continental rifting events in the Mesozoic–Cenozoic time must be accompanied by external tectonic stresses.
- Open Access
Setting the Sequence of Slicing Events Along Deep Subduction Interfaces: 1. The Tectonic and Thermal Structure of the High-P Duplex in Western Crete (Hellenic Margin)
Basal accretion at active subduction margins occurs through a series of tectonic slicing events at varying depths along the plate interface, shaping the forearc domain. To assess the spatial and temporal scale of the accretion-controlled forearc dynamics, it is crucial to constrain the sequence of basal-accretion episodes that form deep accretionary duplexes. This requires identifying the successive tectono-metamorphic units constituting paleo-duplexes and dating the accretion and exhumation events that expose high-pressure rocks at the surface. This first contribution of two companion papers (this issue) presents a detailed reconstruction of the tectonic and thermal structure of a high-pressure/low-temperature paleo-accretionary duplex in western Crete (Greece) that formed along the active Hellenic margin during the Oligocene-Miocene. Combining field observations, structural measurements and Raman spectroscopy on carbonaceous material (RSCM), we identify five tectono-metamorphic slices (i) bounded by shear zones often reworked during exhumation and (ii) characterized by a down-stepping of peak metamorphic temperatures towards lower structural levels. Our geological and structural mapping reveals the overall geometry of the nappe stack forming a dome-like structure, exhumed beneath major top-to-the-N and subordinate top-to-the-S detachments that accommodated N-S-directed crustal extension. This trench-perpendicular extension was intermittently rotated into an E-W direction (trench-parallel), as evidenced by a newly recognized top-to-the-W ductile-brittle detachment. Minor compressional events did not significantly alter the 3D architecture of the paleo-duplex. Reported RSCM peak metamorphic temperatures of ~350-450 °C from the nappe stack align with the typical temperature range for the downdip limit of the seismogenic zones, suggesting a first-order thermo-mechanical control on the depth of basal accretion along the subduction interface. These findings provide crucial constraints for interpreting the deep-accretion and exhumation dynamics that shaped the long-term evolution of the Hellenic forearc domain.
Open AccessSetting the Sequence of Slicing Events Along Deep Subduction Interfaces: 1. The Tectonic and Thermal Structure of the High-P Duplex in Western Crete (Hellenic Margin)
Basal accretion at active subduction margins occurs through a series of tectonic slicing events at varying depths along the plate interface, shaping the forearc domain. To assess the spatial and temporal scale of the accretion-controlled forearc dynamics, it is crucial to constrain the sequence of basal-accretion episodes that form deep accretionary duplexes. This requires identifying the successive tectono-metamorphic units constituting paleo-duplexes and dating the accretion and exhumation events that expose high-pressure rocks at the surface. This first contribution of two companion papers (this issue) presents a detailed reconstruction of the tectonic and thermal structure of a high-pressure/low-temperature paleo-accretionary duplex in western Crete (Greece) that formed along the active Hellenic margin during the Oligocene-Miocene. Combining field observations, structural measurements and Raman spectroscopy on carbonaceous material (RSCM), we identify five tectono-metamorphic slices (i) bounded by shear zones often reworked during exhumation and (ii) characterized by a down-stepping of peak metamorphic temperatures towards lower structural levels. Our geological and structural mapping reveals the overall geometry of the nappe stack forming a dome-like structure, exhumed beneath major top-to-the-N and subordinate top-to-the-S detachments that accommodated N-S-directed crustal extension. This trench-perpendicular extension was intermittently rotated into an E-W direction (trench-parallel), as evidenced by a newly recognized top-to-the-W ductile-brittle detachment. Minor compressional events did not significantly alter the 3D architecture of the paleo-duplex. Reported RSCM peak metamorphic temperatures of ~350-450 °C from the nappe stack align with the typical temperature range for the downdip limit of the seismogenic zones, suggesting a first-order thermo-mechanical control on the depth of basal accretion along the subduction interface. These findings provide crucial constraints for interpreting the deep-accretion and exhumation dynamics that shaped the long-term evolution of the Hellenic forearc domain.
Setting the Sequence of Slicing Events Along Deep Subduction Interfaces: 2. P-T Conditions and Timing of Accretion and Exhumation in Western Crete (Hellenic Margin)
To understand basal-accretion dynamics in subduction zones and forearc crustal response, it is crucial to constrain the timing of slicing events forming high pressure-low temperature accretionary duplexes. This second contribution investigates the pressure-temperature-time history of tectono-metamorphic units in the paleo-duplex of western Crete, accreted along the Hellenic subduction zone during the late Oligocene-Miocene. Petrological characterization, thermodynamic modeling and a data review reveal peak metamorphic conditions evolving from 17-18 kbar and 410-430 °C to 7-8.5 kbar and 310-360 °C from top to base of the nappe stack. These results suggest a decrease in basal-accretion depth from 55-60 km to 25-30 km, likely linked to an increase in the subduction-related geothermal gradient. New Rb/Sr multi-mineral ages show a consistent decrease toward the base of the duplex, except for the lowermost Plattenkalk Unit. These ages, along with the down-stepping of peak conditions, reveal two slicing episodes between ~26 Ma and ~15 Ma, and likely three additional events from the late Oligocene to middle Miocene. (U-Th-Sm)/He thermochronology on zircon indicates rapid exhumation during the middle Miocene, with rates of ~3-11 mm/yr, decreasing to ~2-4 mm/yr at shallow levels. This dynamics was driven by the accelerating southward retreat of the Hellenic subduction, enhanced by slab tearing from ~15 Ma, contributing to the geothermal gradient increase. This study further suggests a sequence of ~2-3-Myr-long deep slicing events, providing a critical timescale for monitoring the tectonic and topographic signatures of deep mass fluxes along active margins worldwide. It also supports ongoing basal-accretion events beneath Crete, contributing to the island’s emergence.
Setting the Sequence of Slicing Events Along Deep Subduction Interfaces: 2. P-T Conditions and Timing of Accretion and Exhumation in Western Crete (Hellenic Margin)
To understand basal-accretion dynamics in subduction zones and forearc crustal response, it is crucial to constrain the timing of slicing events forming high pressure-low temperature accretionary duplexes. This second contribution investigates the pressure-temperature-time history of tectono-metamorphic units in the paleo-duplex of western Crete, accreted along the Hellenic subduction zone during the late Oligocene-Miocene. Petrological characterization, thermodynamic modeling and a data review reveal peak metamorphic conditions evolving from 17-18 kbar and 410-430 °C to 7-8.5 kbar and 310-360 °C from top to base of the nappe stack. These results suggest a decrease in basal-accretion depth from 55-60 km to 25-30 km, likely linked to an increase in the subduction-related geothermal gradient. New Rb/Sr multi-mineral ages show a consistent decrease toward the base of the duplex, except for the lowermost Plattenkalk Unit. These ages, along with the down-stepping of peak conditions, reveal two slicing episodes between ~26 Ma and ~15 Ma, and likely three additional events from the late Oligocene to middle Miocene. (U-Th-Sm)/He thermochronology on zircon indicates rapid exhumation during the middle Miocene, with rates of ~3-11 mm/yr, decreasing to ~2-4 mm/yr at shallow levels. This dynamics was driven by the accelerating southward retreat of the Hellenic subduction, enhanced by slab tearing from ~15 Ma, contributing to the geothermal gradient increase. This study further suggests a sequence of ~2-3-Myr-long deep slicing events, providing a critical timescale for monitoring the tectonic and topographic signatures of deep mass fluxes along active margins worldwide. It also supports ongoing basal-accretion events beneath Crete, contributing to the island’s emergence.
- Open Access
- 28 November 2025
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 44 (12)
3D Petro‐Structural Evolution of the High Pressure‐Low Temperature Phyllite‐Quartzite Nappe Pile in Southern Peloponnese, Greece
Tectonic underplating of high‐pressure/low‐temperature (HP‐LT) tectonic slices is a key mechanism in crustal growth at convergent margins. Yet, the processes controlling the geometry, depth and sequence of underplating events remain poorly constrained. We investigate the 3D petro‐structural architecture of the Phyllite‐Quartzite (PQ) nappe stack in southeastern Peloponnese (Greece), a well‐preserved segment of an Oligo‐Miocene accretionary complex within the Hellenic subduction zone, to constrain how successive pluri‐kilometric slices were formed and exhumed. Detailed structural mapping, petrology, Raman thermometry and thermobarometric modeling reveal two distinct sub‐units: Velanidhia and Pandanassa, interpreted as individual tectonic slices underplated at ∼50–60 km depth. Their pressure peak conditions (Velanidhia: 16 ± 1 kbar, 480 ± 10°C; Pandanassa: 15–18 kbar, 435 ± 21°C) and contrasted retrograde pressure‐temperature paths, witnessing post‐peak heating in Velanidhia and isothermal decompression in Pandanassa, reflect discrete underplating events under evolving thermal regimes. Geological cross‐sections and structural analysis reveal a deep paleo‐accretionary wedge geometry, involving a top‐to‐the‐E ductile‐brittle detachment that accommodated syn‐orogenic exhumation of a dome‐shaped HP‐LT nappe stack later crosscut by steep normal faults. Thanks to the detailed characterization and structural architecture of the PQ series, it is possible to constrain the trench‐parallel (≥115 km) and trench‐perpendicular (≥50 km) dimensions of each tectono‐metamorphic unit, confirming their pluri‐kilometric lateral extent. This work provides new insights into how episodic underplating at the subduction interface, witnessed by stacked tectono‐metamorphic units with contrasted P‐T evolution, governs the architecture of paleo‐accretionary wedges at active margins.
- 28 November 2025
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 44 (12)
Open Access3D Petro‐Structural Evolution of the High Pressure‐Low Temperature Phyllite‐Quartzite Nappe Pile in Southern Peloponnese, Greece
Tectonic underplating of high‐pressure/low‐temperature (HP‐LT) tectonic slices is a key mechanism in crustal growth at convergent margins. Yet, the processes controlling the geometry, depth and sequence of underplating events remain poorly constrained. We investigate the 3D petro‐structural architecture of the Phyllite‐Quartzite (PQ) nappe stack in southeastern Peloponnese (Greece), a well‐preserved segment of an Oligo‐Miocene accretionary complex within the Hellenic subduction zone, to constrain how successive pluri‐kilometric slices were formed and exhumed. Detailed structural mapping, petrology, Raman thermometry and thermobarometric modeling reveal two distinct sub‐units: Velanidhia and Pandanassa, interpreted as individual tectonic slices underplated at ∼50–60 km depth. Their pressure peak conditions (Velanidhia: 16 ± 1 kbar, 480 ± 10°C; Pandanassa: 15–18 kbar, 435 ± 21°C) and contrasted retrograde pressure‐temperature paths, witnessing post‐peak heating in Velanidhia and isothermal decompression in Pandanassa, reflect discrete underplating events under evolving thermal regimes. Geological cross‐sections and structural analysis reveal a deep paleo‐accretionary wedge geometry, involving a top‐to‐the‐E ductile‐brittle detachment that accommodated syn‐orogenic exhumation of a dome‐shaped HP‐LT nappe stack later crosscut by steep normal faults. Thanks to the detailed characterization and structural architecture of the PQ series, it is possible to constrain the trench‐parallel (≥115 km) and trench‐perpendicular (≥50 km) dimensions of each tectono‐metamorphic unit, confirming their pluri‐kilometric lateral extent. This work provides new insights into how episodic underplating at the subduction interface, witnessed by stacked tectono‐metamorphic units with contrasted P‐T evolution, governs the architecture of paleo‐accretionary wedges at active margins.
- 19 March 2025
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 44 (3)
Thank You to Our 2024 Reviewers
The editors of Tectonics would like to offer our sincere thanks to those who reviewed manuscripts for us in 2024. The time reviewers spend reading and commenting on manuscripts helps to ensure that our science is well communicated, clearly documented, appropriately placed in the context of prior work, and effectively archived for future usage. We understand that as one of the AGU journals hosting long format articles, reviewing a manuscript for Tectonics is a considerable time commitment. For this reason, we are particularly grateful to our reviewers for their diligence in helping to provide high‐quality, timely reviews. We also appreciate the efforts many reviewers contribute toward advancing open science by evaluating the availability and accessibility of data, which are key objectives of the AGU's FAIR data policy. The papers published in Tectonics in 2024 benefitted from the careful scrutiny and constructive critique drawn from the expertise of 493 reviewers, who provided a total of 706 reviews. We are grateful for this contribution toward producing the high‐quality output that has helped Tectonics maintain a prominent position in scientific publishing for decades, and for the spirit of teamwork that makes the peer review process an asset in our community.
- 19 March 2025
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 44 (3)
Thank You to Our 2024 Reviewers
The editors of Tectonics would like to offer our sincere thanks to those who reviewed manuscripts for us in 2024. The time reviewers spend reading and commenting on manuscripts helps to ensure that our science is well communicated, clearly documented, appropriately placed in the context of prior work, and effectively archived for future usage. We understand that as one of the AGU journals hosting long format articles, reviewing a manuscript for Tectonics is a considerable time commitment. For this reason, we are particularly grateful to our reviewers for their diligence in helping to provide high‐quality, timely reviews. We also appreciate the efforts many reviewers contribute toward advancing open science by evaluating the availability and accessibility of data, which are key objectives of the AGU's FAIR data policy. The papers published in Tectonics in 2024 benefitted from the careful scrutiny and constructive critique drawn from the expertise of 493 reviewers, who provided a total of 706 reviews. We are grateful for this contribution toward producing the high‐quality output that has helped Tectonics maintain a prominent position in scientific publishing for decades, and for the spirit of teamwork that makes the peer review process an asset in our community.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Spatial extent of deep slab slicing events: Insights from the Phyllite-Quartzite paleo-accretionary complex (SE-Peloponnese and Kythira, Greece)
The massive transfer of material at depth significantly influences the long-term morphology of active subduction zones. However, the process of basal accretion (or tectonic underplating), when active, remains challenging to observe directly, due to the low resolution of geophysical imaging at high depth and the lack of spatial and temporal constraints on its tectonic and topographic signature in fore-arc domains. To tackle this issue, we aim at constraining the size of accreted tectonic slices that were stacked at high pressure/low temperature (HP/LT) conditions to build an accretionary complex.To provide such constraints, we carried out a multidisciplinary study on the now-exhumed Phyllite Quartzite paleo-accretionary complex dated to the Oligo-Miocene, which crops out discontinuously along the active Hellenic subduction zone (Greece). This natural laboratory represents a key site for studying deep accretion processes as it remains in a fore-arc position and has not undergone a strong overprinting by later tectonic events.A petro-structural study was therefore undertaken to identify the different sub-units of the Phyllite Quartzite complex. Detailed mapping of Kythira and southeastern Peloponnese, combined with structural measurements, petrological observations, Raman spectroscopy of carbonaceous material, and thermobarometric modeling, revealed several tectono-metamorphic sub-units forming this nappe stack. These units are distinguished by their petrological characteristics, the orientation of finite deformation markers, and their pressure-temperature history.The results highlight two HP/LT sub-units in southeastern Peloponnese, which are also likely present on the island of Kythira, where one or two additional sub-units have been identified. These sub-units exhibit a distinct metamorphic evolution characterized by an increasing peak temperature from the base to the top of the HP/LT nappe stack. These observations suggest that the Phyllite-Quartzite paleo-accretionary complex was formed through a minimum of three successive episodes of basal accretion in this area. To better constrain the geometry of these units, spatial correlations with the neighboring regions where the nappe stack crops out are proposed, providing a minimum estimate of the size of the HP/LT units. The slices are estimated to measure tens of kilometers by hundreds of kilometers in the trench-perpendicular and trench-parallel directions, respectively. This study thus represents a first key step for constraining the characteristic size and the dynamics of tectonic underplating, which may still be active along the Hellenic margin and is observed in many active subduction zones worldwide.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessSpatial extent of deep slab slicing events: Insights from the Phyllite-Quartzite paleo-accretionary complex (SE-Peloponnese and Kythira, Greece)
The massive transfer of material at depth significantly influences the long-term morphology of active subduction zones. However, the process of basal accretion (or tectonic underplating), when active, remains challenging to observe directly, due to the low resolution of geophysical imaging at high depth and the lack of spatial and temporal constraints on its tectonic and topographic signature in fore-arc domains. To tackle this issue, we aim at constraining the size of accreted tectonic slices that were stacked at high pressure/low temperature (HP/LT) conditions to build an accretionary complex.To provide such constraints, we carried out a multidisciplinary study on the now-exhumed Phyllite Quartzite paleo-accretionary complex dated to the Oligo-Miocene, which crops out discontinuously along the active Hellenic subduction zone (Greece). This natural laboratory represents a key site for studying deep accretion processes as it remains in a fore-arc position and has not undergone a strong overprinting by later tectonic events.A petro-structural study was therefore undertaken to identify the different sub-units of the Phyllite Quartzite complex. Detailed mapping of Kythira and southeastern Peloponnese, combined with structural measurements, petrological observations, Raman spectroscopy of carbonaceous material, and thermobarometric modeling, revealed several tectono-metamorphic sub-units forming this nappe stack. These units are distinguished by their petrological characteristics, the orientation of finite deformation markers, and their pressure-temperature history.The results highlight two HP/LT sub-units in southeastern Peloponnese, which are also likely present on the island of Kythira, where one or two additional sub-units have been identified. These sub-units exhibit a distinct metamorphic evolution characterized by an increasing peak temperature from the base to the top of the HP/LT nappe stack. These observations suggest that the Phyllite-Quartzite paleo-accretionary complex was formed through a minimum of three successive episodes of basal accretion in this area. To better constrain the geometry of these units, spatial correlations with the neighboring regions where the nappe stack crops out are proposed, providing a minimum estimate of the size of the HP/LT units. The slices are estimated to measure tens of kilometers by hundreds of kilometers in the trench-perpendicular and trench-parallel directions, respectively. This study thus represents a first key step for constraining the characteristic size and the dynamics of tectonic underplating, which may still be active along the Hellenic margin and is observed in many active subduction zones worldwide.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Continental back-arc extension, molten lower crust and syn-kinematic granites: insights from Cycladic MCCs
Rifting in back-arc basins is characterized by large extension rates, low-angle normal faults and metamorphic core complexes (MCC) displaying partially molten cores and granitic intrusions. The Aegean metamorphic core complexes (MCC) were exhumed underneath crustal-scale detachments accommodating large displacements of the order of 50-100 km and were intruded by Miocene syn-kinematic granites. A common finite geometry and kinematics of all these detachment/pluton systems is recognized with asymmetric intrusive bodies extracted from anatectic lower crust, whose internal structure is controlled by the large-scale dynamics, from the magmatic stage to mylonitization and final exhumation in brittle conditions. Detachments are organized in sets of structures working sequentially evolving from ductile to brittle, the successive branches of the detachment being progressively inactivated by emplacing plutonic batches. The Mykonos-Delos-Rheneia (MDR) MCC shows these interactions between lower crustal migmatites and different syn-kinematic plutons. Our new detailed map of Delos (1/5000) shows geometrical and kinematic relationships between the different magmatic venues during deformation. A strong internal orientation of granites is observed from the magmatic stage until the last ultramylonites below the upper detachments. The deepest magmatic batches are rich in high-grade rocks septae and mafic enclaves, also oriented parallel to regional stretching. Evidence for magma mixing and mingling further indicates interactions with mafic venues at the base of the crust from the mantle. Large high-grade rocks septae are intensely molten and the contact zone between host gneiss and plutons shows intense migmatitization with a foliation parallel to the granite magmatic foliation. Characteristic banded facies marking the contacts between the different intrusions result from high-temperature shearing at the magmatic stage. At all scales foliation and lineation in magmatic rocks and surrounding gneisses are parallel, suggesting a similar weak rheology. Delos shows the roots of these intrusions emplaced as a large-scale sheath-fold whose axis is parallel to the regional stretching direction. The quality of outcrops in Delos, Rheneia and Mykonos, as well as the links between magma emplacement and regional tectonics makes the MDR MCC a natural laboratory for studying the interactions between magmatic intrusions and crustal deformation in tectonically active and hot contexts. In such contexts magmatic and tectonic processes in the lower and middle crusts appear closely interconnected, working at a similar pace and interacting with mantle deformation and melting.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessContinental back-arc extension, molten lower crust and syn-kinematic granites: insights from Cycladic MCCs
Rifting in back-arc basins is characterized by large extension rates, low-angle normal faults and metamorphic core complexes (MCC) displaying partially molten cores and granitic intrusions. The Aegean metamorphic core complexes (MCC) were exhumed underneath crustal-scale detachments accommodating large displacements of the order of 50-100 km and were intruded by Miocene syn-kinematic granites. A common finite geometry and kinematics of all these detachment/pluton systems is recognized with asymmetric intrusive bodies extracted from anatectic lower crust, whose internal structure is controlled by the large-scale dynamics, from the magmatic stage to mylonitization and final exhumation in brittle conditions. Detachments are organized in sets of structures working sequentially evolving from ductile to brittle, the successive branches of the detachment being progressively inactivated by emplacing plutonic batches. The Mykonos-Delos-Rheneia (MDR) MCC shows these interactions between lower crustal migmatites and different syn-kinematic plutons. Our new detailed map of Delos (1/5000) shows geometrical and kinematic relationships between the different magmatic venues during deformation. A strong internal orientation of granites is observed from the magmatic stage until the last ultramylonites below the upper detachments. The deepest magmatic batches are rich in high-grade rocks septae and mafic enclaves, also oriented parallel to regional stretching. Evidence for magma mixing and mingling further indicates interactions with mafic venues at the base of the crust from the mantle. Large high-grade rocks septae are intensely molten and the contact zone between host gneiss and plutons shows intense migmatitization with a foliation parallel to the granite magmatic foliation. Characteristic banded facies marking the contacts between the different intrusions result from high-temperature shearing at the magmatic stage. At all scales foliation and lineation in magmatic rocks and surrounding gneisses are parallel, suggesting a similar weak rheology. Delos shows the roots of these intrusions emplaced as a large-scale sheath-fold whose axis is parallel to the regional stretching direction. The quality of outcrops in Delos, Rheneia and Mykonos, as well as the links between magma emplacement and regional tectonics makes the MDR MCC a natural laboratory for studying the interactions between magmatic intrusions and crustal deformation in tectonically active and hot contexts. In such contexts magmatic and tectonic processes in the lower and middle crusts appear closely interconnected, working at a similar pace and interacting with mantle deformation and melting.
- Open Access
- 1 January 2025
- Published by OpenEdition in Bulletin archéologique des Écoles françaises à l’étranger
Géologie et architecture à Délos
Données scientifiques produites : – Versement aux archives manuscrites de l'EFA : Rapport de mission C56‑2024‑R‑01– Versement aux archives photographiques de l’EFA : N1219 et N1222 Chroniques de l’EFA : https://chronique.efa.gr/?r=report&id=19583 Le programme Géologie et architecture à Délos s’est terminé en 2024 par un séminaire doctoral qui a rassemblé du 29 avril au 10 mai douze étudiants de cinq nationalités autour de L. Jolivet, J.‑Ch. Moretti, P. Segault et T. Vettor, et par une mission...
- 1 January 2025
- Published by OpenEdition in Bulletin archéologique des Écoles françaises à l’étranger
Open AccessGéologie et architecture à Délos
Données scientifiques produites : – Versement aux archives manuscrites de l'EFA : Rapport de mission C56‑2024‑R‑01– Versement aux archives photographiques de l’EFA : N1219 et N1222 Chroniques de l’EFA : https://chronique.efa.gr/?r=report&id=19583 Le programme Géologie et architecture à Délos s’est terminé en 2024 par un séminaire doctoral qui a rassemblé du 29 avril au 10 mai douze étudiants de cinq nationalités autour de L. Jolivet, J.‑Ch. Moretti, P. Segault et T. Vettor, et par une mission...
- 10 July 2024
- Published by Wiley in Journal of Metamorphic Geology
- Vol. 42 (8) , 1035-1067
Hydration of mafic crustal rocks at high temperature during brittle‐viscous deformation along a strike‐slip plate boundary
The Poroshiri ophiolite (Hidaka metamorphic belt, Japan) occurs within a crustal‐scale network of high‐temperature, dextral shear zones that accommodated hundreds of kilometres of displacement due to the opening of the Japan Sea in the Neogene. The opholitic rocks comprise ultramafic, mafic and sedimentary protoliths that have been variably hydrated and metamorphosed. This work investigates the mechanisms and timing of fluid influx relative to viscous deformation in metagabbros and amphibolites deformed during exhumation from granulite‐ to amphibolite‐facies conditions. We consider a range of microstructures, from low strain domains and 1–2 mm thick shear bands to mylonites with a thickness of a few meters. Low strain domains of metagabbros exhibit corona textures with symplectites consisting of pargasitic amphibole (Ed0.7) ‐ anorthitic plagioclase (An80–92) ± orthopyroxene ± clinopyroxene forming around olivine and igneous pyroxene and with similar plagioclase–amphibole‐orthopyroxene ± clinopyroxene granoblastic aggregates in micrometric‐thick fractures. These textures result from hydration under low fluid‐rock ratio, with elevated H2O content only occurring locally (H2O > 1–1.2 wt%). Igneous mineral replacement leads to grain size reduction from 1 mm to ~10 μm. Amphibole exhibits a strong core‐rim zonation primarily controlled by the high diffusivity of Fe, Mg and OH and the low diffusivity of Al. Mineral compositional equilibrium is achieved at the scale of 100–200 μm. In mm‐thick localized shear bands and in metric‐scale mylonitic amphibolites, the heterogeneous mineral composition of amphibole (Ed0.2–0.5) and plagioclase (An40−An80) indicates only partial re‐equilibration (at the scale of 200–500 μm) despite higher fluid‐rock ratios and more pervasive fluid percolation than in metagabbros. Plagioclase–amphibole thermometry and equilibrium phase diagrams indicate that the initial fluid infiltration and corona formation occurred at 800–850°C by fracturing and percolation along grain boundaries. This was followed by the main fluid percolation and mylonitization event, which occurred during exhumation and cooling at conditions of 720–580°C, ~4 kbar. Continuous hydration during retrogression was achieved by the influx of dominantly seawater‐derived fluid, as attested by the high chlorine (Cl) contents (>300–400 ppm) of amphiboles in fractures. The heterogeneous distribution of fractures controls the distribution of fluid from the earliest stages of hydration, creating positive feedback where the growth of hydrous minerals as amphibole (up to +300 vol% of amphibole in high strain areas relative to the low‐strain ones) and the formation of fine‐grained mixed domains that led to further localization of viscous strain and mass transfer (variations of ± 30–40% in major elements). The Poroshiri ophiolite therefore represents a good fossil example of a former transpressional plate boundary where coupled metamorphic and deformation processes were triggered by seawater‐derived fluid that percolated to depths of ~15 km.
- 10 July 2024
- Published by Wiley in Journal of Metamorphic Geology
- Vol. 42 (8) , 1035-1067
Hydration of mafic crustal rocks at high temperature during brittle‐viscous deformation along a strike‐slip plate boundary
The Poroshiri ophiolite (Hidaka metamorphic belt, Japan) occurs within a crustal‐scale network of high‐temperature, dextral shear zones that accommodated hundreds of kilometres of displacement due to the opening of the Japan Sea in the Neogene. The opholitic rocks comprise ultramafic, mafic and sedimentary protoliths that have been variably hydrated and metamorphosed. This work investigates the mechanisms and timing of fluid influx relative to viscous deformation in metagabbros and amphibolites deformed during exhumation from granulite‐ to amphibolite‐facies conditions. We consider a range of microstructures, from low strain domains and 1–2 mm thick shear bands to mylonites with a thickness of a few meters. Low strain domains of metagabbros exhibit corona textures with symplectites consisting of pargasitic amphibole (Ed0.7) ‐ anorthitic plagioclase (An80–92) ± orthopyroxene ± clinopyroxene forming around olivine and igneous pyroxene and with similar plagioclase–amphibole‐orthopyroxene ± clinopyroxene granoblastic aggregates in micrometric‐thick fractures. These textures result from hydration under low fluid‐rock ratio, with elevated H2O content only occurring locally (H2O > 1–1.2 wt%). Igneous mineral replacement leads to grain size reduction from 1 mm to ~10 μm. Amphibole exhibits a strong core‐rim zonation primarily controlled by the high diffusivity of Fe, Mg and OH and the low diffusivity of Al. Mineral compositional equilibrium is achieved at the scale of 100–200 μm. In mm‐thick localized shear bands and in metric‐scale mylonitic amphibolites, the heterogeneous mineral composition of amphibole (Ed0.2–0.5) and plagioclase (An40−An80) indicates only partial re‐equilibration (at the scale of 200–500 μm) despite higher fluid‐rock ratios and more pervasive fluid percolation than in metagabbros. Plagioclase–amphibole thermometry and equilibrium phase diagrams indicate that the initial fluid infiltration and corona formation occurred at 800–850°C by fracturing and percolation along grain boundaries. This was followed by the main fluid percolation and mylonitization event, which occurred during exhumation and cooling at conditions of 720–580°C, ~4 kbar. Continuous hydration during retrogression was achieved by the influx of dominantly seawater‐derived fluid, as attested by the high chlorine (Cl) contents (>300–400 ppm) of amphiboles in fractures. The heterogeneous distribution of fractures controls the distribution of fluid from the earliest stages of hydration, creating positive feedback where the growth of hydrous minerals as amphibole (up to +300 vol% of amphibole in high strain areas relative to the low‐strain ones) and the formation of fine‐grained mixed domains that led to further localization of viscous strain and mass transfer (variations of ± 30–40% in major elements). The Poroshiri ophiolite therefore represents a good fossil example of a former transpressional plate boundary where coupled metamorphic and deformation processes were triggered by seawater‐derived fluid that percolated to depths of ~15 km.