ALAe Ran Lim

Ae Ran Lim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ae Ran Lim has a total of 87 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation on crystal structure, phase transition behavior, and structural geometries of organic-inorganic hybrid [N(C3H7)4]2ZnBr4

    by Huiyeong Ju, Ae Ran Lim

    Organic-inorganic hybrid compounds have attracted significant attention as a versatile class of functional materials owing to their unique structural characteristics and tunable physicochemical properties. In this study, colorless and transparent single crystals of [N(C3H7)4]2ZnBr4 were grown from an aqueous solution. Thermal analyses (differential scanning calorimetry, differential thermal analysis), powder X-ray diffraction (XRD), and optical microscopy revealed a phase transition (TC) at 395 K, followed by decomposition and melting at 529 and 540 K, respectively. From the single-crystal XRD experiment, crystallographic analysis indicates a monoclinic symmetry (space group C2/c), with the unit cell dimensions a = 33.1977 Å, b = 14.2615 Å, c = 15.1130 Å, and β = 110.3840°, and remains thermally stable up to approximately 521 K. Solid-state nuclear magnetic resonance (NMR) results further support these findings: the 1H and 14N magic angle spinning (MAS) NMR chemical shifts show discontinuous changes near the TC, while the 13C MAS NMR spectra exhibit variations in peak multiplicity, indicating a reduction in symmetry below the transition point. Moreover, the progressive line narrowing observed in the 1H, 13C, and 14N spectra with increasing temperature reflects enhanced molecular motion, particularly reorientational dynamics associated with the TC.

  • Open Access

    A comprehensive study of the crystal structure and dynamics of [N(C3H7)4]2Cd2Cl6

    by Huiyeong Ju, Yun Sang Shin, Ae Ran Lim

    Single crystals of the organic–inorganic hybrid compound [N(C3H7)4]2Cd2Cl6 were synthesized by an aqueous solution method, and their structural and dynamic properties were systematically investigated. Thermal analyses revealed phase transitions at 321 K (TC1) and 445 K (TC2), followed by melting at 476 K. Single-crystal X-ray diffraction indicated that the compound crystallizes in a triclinic system with space group P\(\:\stackrel{-}{1}\), showing variations in lattice parameters across TC1 while maintaining the same symmetry. On the other hand, whereas the 1H, 13C, and 14N MAS NMR chemical shifts of the [N(C3H7)4] cations showed little variation near TC1, the 113Cd MAS NMR spectra of the Cd2Cl6 anions revealed a clear change, with two Cd sites (Cd(1) and Cd(2)) merging into a single site. This agrees well with the SCXRD results, indicating that the phase transition at TC1 arises primarily from an order–disorder transition of the Cd2Cl6 anions rather than the [N(C3H7)4] cations. In addition, temperature-dependent line narrowing in the1H, 13C, 14N, and 113Cd NMR spectra reflects enhanced molecular dynamics at elevated temperatures. These results provide insights into the phase behavior and stability of [N(C3H7)4]2Cd2Cl6, highlighting its potential relevance for future functional applications.


  • Open Access

    Effect of sulfone linkage on chain architecture and structure–property relationships of colorless and transparent polyimides

    by Yun Sang Shin, Ae Ran Lim, Jin-Hae Chang

    CPI films were synthesized using two dianhydrides—BPAand DSDA—in combination with three diamines to investigate the effect of backbone structure on material properties.


  • Open Access

    Organoclay/functionalized-graphene dual-filler complex for high-performance polyimide nanocomposites

    by Jun Yeon Hwang, Ae Ran Lim, Jin-Hae Chang

    Aromatic polyimides (PIs) are super engineering polymers with excellent mechanical properties and thermal stability, making them suitable for applications in semiconductor devices, displays, and electronic materials. In this study, a poly(amic acid) (PAA) was synthesized from dianhydride 4,4′-biphthalic anhydride and diamine N,N′-[2,2′-bis(trifluoromethyl)-4,4′-biphenylene]bis(4-aminobenzamide) monomers, and a hybrid PAA was prepared by dispersing a complex filler using a solution intercalation method. The PAA hybrid solution was thermally imidized under various heat treatment conditions to obtain PI nanocomposite films. A novel complex filler containing both clay and graphene was synthesized through organic surface modification to improve compatibility and miscibility with the PI matrix. This dual-filler system was designed to enhance the overall performance of the PI hybrid films by exploiting the synergistic effects of both fillers. In this study, a C8-complex filler composed of octyl-modified montmorillonite and octyl-functionalized graphene was utilized. PI hybrid films were fabricated by dispersing the C8-complex filler into the PI matrix at various loadings ranging from 0 to 2.0 wt%. The effects of C8-complex filler content on the dispersion morphology, thermomechanical properties, and optical transparency of the resulting PI hybrid films were systematically investigated.


  • Open Access

    Colorless and transparent polyimide nanocomposite films containing organically modified fillers comprising an organoclay/functionalized-graphene complex

    by Changyub Na, Ae Ran Lim, Jin-Hae Chang

    Aromatic colorless and transparent polyimides (CPIs) are super engineering polymers with excellent mechanical performance and thermal stability, making them particularly suitable for optical displays and electronic materials. In this study, a complex filler was dispersed into poly(amic acid) (PAA) synthesized from dianhydride 5,5’-sulfonylbis(isobenzo-furan-1,3-dione) and diamine bis[4-(3-aminophenoxy) phenyl]sulfone monomers using a solution intercalation method, resulting in the formation of a PAA hybrid. Solutions of this PAA hybrid were thermally imidized through various heat treatments to synthesize CPI hybrid films. A new complex filler containing both clay and graphene was synthesized through organic surface modification of the clay and graphene, and the synergistic effects of the two fillers were investigated. A C16-complex synthesized from an organoclay (hexadecyl-montmorillonite, C16-MMT) and functionalized graphene sheets (hexadecyl-graphene sheet, C16-GS) was used as the complex filler in this study. CPI hybrid films were fabricated by dispersing various loading (0–2.0 wt%) of the C16-complex filler into a CPI matrix, and their thermomechanical properties, filler dispersion morphology, and optical transparency were analyzed based on their filler content. In the CPI hybrid films, the C16-complex exhibited excellent nanoscale dispersion at a filler content of 1.0 wt%, and the corresponding systems showed excellent thermomechanical properties; however, when the filler content exceeded the critical content, filler aggregation occurred, adversely affecting the properties of the hybrid films. In contrast, the optical properties of the hybrid films gradually deteriorated with increasing filler content.


  • Open Access

    Comprehensive study of organic–inorganic hybrid [N(C2H5)4]2CdBr4: crystal structure, phase transitions, and structural geometry

    by Sun Ha Kim, Daiha Shin, Yoon-Joo Ko, Ae Ran Lim

    The compound [N(C2H5)4]2CdBr4, an organic–inorganic hybrid compound, has garnered attention for its potential applications across various fields.


  • Open Access

    Elucidation of crystal growth, structural characterization, thermal properties, and molecular dynamics using NMR near phase transition temperature of [N(CH3)4]2CoCl4

    by Changyub Na, Ae Ran Lim

    This discussion explores various facets of recently elucidated characteristics of [N(CH3)4]2CoCl4 single crystals. Phase transitions were identified at 196, 276, and 293 K, and thermodynamic stability was observed up to 640 K. With increasing temperature, the crystal structures of phases III, II, and I were monoclinic, orthorhombic, and orthorhombic, respectively. In addition, the nuclear magnetic resonance (NMR) chemical shifts of 1H, 13C, and 14N were analyzed to elucidate the structural geometry near TC. In phases I and II, two 13C NMR signals were observed that may be attributed to the different N(1)(CH3)4 and N(2)(CH3)4 sites, whereas, in phase III, four 13C NMR signals were observed that may be attributed to the six different N(CH3)4 sites. By contrast, because the spin of 14N is I = 1, two signals are generally expected, however, in phase I, four signals were observed owing to the different N(1)(CH3)4 and N(2)(CH3)4 sites. In phase III, 12 signals were observed because six different N sites were present. The results of the 13C and 14N NMR indicate that the transition from phase I to phase III involves a decrease in the symmetry of the crystal structure. The temperature dependences of the relaxation times T1 and T1ρ in the laboratory and rotating frame for1H enabled the estimation of the activation energies for the molecular motion of the N(CH3)4 groups.


  • Open Access

    Organic–Inorganic Hybrid Perovskite [N(C2H5)4]2CoCl4 Crystals: Growth, Phase Transition, Thermodynamic Property, Structural Geometry, and Molecular Motion

    by Ae Ran Lim

    The research has focused on candidates for application in various fields on the organic–inorganic hybrid perovskite-type [N­(C2H5)4]2CoCl4. Here, [N­(C2H5)4]2CoCl4 single crystals were grown, and their phase transition temperature (TC) was about 228 K. Single-crystal X-ray diffraction performed at 300 K revealed that the crystals possess a tetragonal structure belonging to the P42/nmc space group, and their thermal behavior was subsequently analyzed. To investigate the influence of N­(C2H5)4 cations near TC, temperature dependences of the resonance frequency and chemical shifts in the 1H, 13C, and 14N NMR spectra were analyzed. The abrupt change in the 1H NMR resonance frequencies near TC, in contrast to the variations observed in the 13C and 14N chemical shifts, is suggested to be closely related to the change in the Cl ligand of the CoCl4 group nearest to the terminal methyl group. Furthermore, the activation energies for the molecular motions determined from the 1H spin–lattice relaxation time in phases I and II were 4.16 and 1.08 kJ/mol, respectively. It can be inferred that CH2 and CH3 groups move more freely in phase II, in contrast to phase I, where the [N­(C2H5)4]+ cation displays mostly unified overall motion. We compared the results for [N­(C2H5)4]2CoCl4 obtained in this study and [N­(C2H5)4]2BCl4 (B=Cu and Zn) obtained by our previous group. The fundamental mechanism of the phase transition in the [N­(C2H5)4]2CoCl4 crystal of the A2BX4 type indicates that this material may be effectively utilized in diverse application areas.