TCTeng-Hu Cheng

Teng-Hu Cheng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Teng-Hu Cheng has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Concurrent Learning for Cooperative UAV Transportation of Unknown Payloads

    by Chi-An Lee, Teng-Hu Cheng

    In this work, the transportation problem is addressed by directly attaching the payload to a team of unmanned aerial vehicles (UAVs). The proposed flight controller for cooperative transportation offers a solution by eliminating the need for prior knowledge of payload details, such as the center of gravity (CoG), mass, and moment of inertia (MoI). Typically, the formation for transporting the payload is evenly distributed along the payload boundary. However, this formation can lead to inefficiencies, especially when the CoG of the system is not aligned with the geometric center of the system. In such circumstances, it can result in steady-state error and shorter endurance. The developed controller incorporates a concurrent learning estimator to estimate the mass and CoG simultaneously during flight. This estimation is leveraged to balance power consumption among all UAV agents, resulting in a significant extension of flight time. The system's stability is mathematically proven through the Lyapunov theorem, ensuring a reliable combination of the estimator and adaptive controller. To validate the performance and effectiveness of the proposed approach, simulations and real-world experiments have been conducted, demonstrating the controller's capability to enhance cooperative transportation operations. The results highlight its potential to improve the field of UAV-based payload transportation and provide more efficient and cost-effective transport solutions.


  • Open Access

    F-LVINS: Flexible Lidar-Visual-Inertial Odometry Systems

    by Xiang-Shi Tang, Teng-Hu Cheng

    The development of a new system called Flexible Lidar-Visual-Inertial Odometry (F-LVINS) offers improved localization accuracy even in challenging environments. This system employs a multi-sensor fusion approach that is flexible and adapts to changes in the environment by utilizing a switching mechanism based on the trace values of the Fisher information matrix (FIM). With this mechanism, the F-LVINS system can automatically switch between different modes, such as Lidar-Visual-Inertial Odometry, Lidar Odometry, and Visual-Inertial Odometry, in order to provide the best possible estimate. The system assesses the reliability of each mode based on the FIM’s trace values, which are calculated from the estimation uncertainty obtained from the Lidar and Visual-Inertial Odometry modules. Experimental evaluations demonstrate that the F-LVINS system outperforms other existing methods in open data sequences.

  • Optimal Sensing for Tracking Task by Heterogeneous Multi-UAV Systems

    by Hsin-Ai Hung, Hao-Huan Hsu, Teng-Hu Cheng

    A heterogeneous sensing multiunmanned aerial vehicle (UAV) system is developed to track a moving target undergoing unknown motion. Using heterogeneous sensors for tracking can increase robustness and reduce costs. However, the formation configuration of the multi-UAV system needs to be designed to ensure the best estimation performance. A metric based on the Fisher information matrix is used to determine the best formation configuration since the state covariance matrix was proven to be lower bounded by the Cramer–Rao lower bound. In other words, the determinant value of the Fisher information matrix is designed to be the cost function, and limitation of the field of view (FOV), limitation of the tracking distance, and avoiding inter-UAV collisions are considered as constraints. Finally, the generated optimal formation configuration is converted to the relative position for the distributed controller of the UAVs to achieve tracking. Controllers for UAVs are designed to ensure that tracking of the target is achieved in the optimal configuration with the constraints satisfied. In addition to performing the theoretical analysis, experiments and simulations were conducted to verify the efficacy of the developed heterogeneous sensing system.


  • Open Access

    Motor-Efficiency Estimation and Control of Multirotors Comprising a Cooperative Transportation System

    by Chia-Cheng Chang, Teng-Hu Cheng

    A cooperative transportation system (CTS) composed of two multirotors has been developed to facilitate the cooperative transportation of a payload, even in the presence of defective motors. The reduced thrust generated by the faulty motors may cause greater tracking errors, making it challenging to control and estimate the system. Moreover, the reduced thrust can also act as a disturbance to the other UAV, further exacerbating the problem. To address these issues, the motor thrust is reconfigured using an efficiency estimator based on an unscented Kalman filter (UKF). This estimator increases the thrust of the defective motors, thus improving the system’s performance. The CTS achieves trajectory tracking despite the defective motors by using a geometric controller that incorporates the motor-efficiency estimator. A stability analysis has been conducted to prove the stability of the tracking errors. The estimation and control performances have been verified through simulations.


  • Cooperative Transportation of UAVs Without Inter-UAV Communication

    by Pin-Xian Wu, Cheng-Cheng Yang, Teng-Hu Cheng

    In this article, a leader–follower system is developed for cooperative transportation. To the best of our knowledge, this is the first work in which interunmanned aerial vehicle communication is not required and the reference trajectory of the payload can be modified in real time, so that it can be applied to a dynamically changing environment. To track the modified reference trajectory in real time under the communication-free condition, the leader–follower system is considered as a nonholonomic system in which a controller is developed for the leader to achieve an asymptotic tracking of the payload. To eliminate the need to install force sensors, unscented Kalman filters (UKFs) are developed to estimate the forces applied by the leader and the follower. Stability analysis is conducted to prove that the tracking error of the closed-loop system is asymptotically stable; however, the dynamics of the UKF estimators is not considered in the closed-loop system, which is assumed to be a deterministic system for the controller. The experiments show that the controllers of the leader and the follower can work in the real world, but the tracking errors are affected by the disturbance of airflow in a restricted space.


  • Open Access

    Finite-Time Geometric Tracking Controller for Multirotor Systems

    by Han-Hsuan An, Teng-Hu Cheng

    A continuous nonsingular terminal sliding-mode controller (N-TSMC) has been developed that ensures finite time convergence of the attitude of a multirotor subject to disturbance. A newly designed disturbance compensator is incorporated in the developed controller to guarantee that the disturbance compensation error exhibits finite-time convergence. A stability analysis showed that the developed controller can ensure that the closed-loop system achieves homogeneous finitetime stability. Simulations were performed to verify the efficacy of the developed controller. Compared with the traditional NTSMC, the simulation results indicate that the continuous NTSMC can still achieve finite-time convergence without causing high-frequency chattering since the control input is continuous. To the best of our knowledge, this is the first time that a continuous N-TSMC has been applied to multirotor systems to ensure finite-time stability.


  • Parameter Estimation and Control of Multirotors

    by Cheng-Cheng Yang, Teng-Hu Cheng

    A controller based on integral concurrent learning (ICL) has been developed for controlling a multirotor unmanned aerial vehicle with unknown mass and moment of inertia, and it guarantees that the tracking errors and the estimation errors of the parameters asymptotically converge to zero. The condition for convergence of the estimated parameters in the developed ICL controller can be verified online or offline by utilizing the data recorded during normal operation over a period, and satisfying the condition does not require persistence of excitation. Since the dynamics of a multirotor is globally defined, the developed ICL controller ensures almost global tracking and parameter estimation. The developed control architecture can be generalized to control any multirotor of unknown mass and moment of inertia with guaranteed system stability. A stability analysis is conducted to ensure that both the tracking errors and the estimation errors of the parameters asymptotically converge to zero. The performance and efficacy of the ICL controller have been verified in experiments.


  • Image-Based Multi-UAV Tracking System in a Cluttered Environment

    by Hsin-Ai Hung, Hao-Huan Hsu, Teng-Hu Cheng

    A tracking controller for unmanned aerial vehicles (UAVs) is developed to track moving targets undergoing unknown translational and rotational motions. The main challenges are to control both the relative positions and angles between the target and the UAVs to within desired values, and to guarantee that the generated control inputs to the UAVs are feasible (i.e., within their motion capabilities). Moreover, the UAVs are controlled to ensure that the target always remains within the fields of view of their onboard cameras. To the best of our knowledge, this is the first work to apply multiple UAVs to cooperatively track a dynamic target while ensuring that the UAVs remain connected and that both occlusion and collisions are avoided. To achieve these control objectives, a designed controller solved based on the aforementioned tracking controller using quadratic programming can generate minimally invasive control actions to achieve occlusion avoidance and collision avoidance. Furthermore, control barrier functions (CBFs) with a distributed design are developed in order to reduce the amount of inter-UAV communication. Simulations were performed to assess the efficacy and performance of the developed CBF-based controller for the multi-UAV system in tracking a target.


  • Open Access

    Visual Servoing of a Moving Target by an Unmanned Aerial Vehicle

    by Ching-Wen Chen, Hsin-Ai Hung, Po-Hung Yang, Teng-Hu Cheng

    To track moving targets undergoing unknown translational and rotational motions, a tracking controller is developed for unmanned aerial vehicles (UAVs). The main challenges are to control both the relative position and orientation between the target and the UAV to within desired values, and to guarantee that the generated control input to the UAV is feasible (i.e., below its motion capability). Moreover, the UAV is controlled to ensure that the target always remains within the field of view of the onboard camera. These control objectives were achieved by developing a nonlinear-model predictive controller, in which the future motion of the target is predicted by quadratic programming (QP). Since constraints of the feature vector and the control input are considered when solving the optimal control problem, the control inputs can be bounded and the target can remain inside the image. Three simulations were performed to compare the efficacy and performance of the developed controller with a traditional image-based visual servoing controller.


  • Open Access

    RTLIO: Real-Time LiDAR-Inertial Odometry and Mapping for UAVs

    by Jung-Cheng Yang, Chun-Jung Lin, Bing-Yuan You, Yin-Long Yan, Teng-Hu Cheng

    Most UAVs rely on GPS for localization in an outdoor environment. However, in GPS-denied environment, other sources of localization are required for UAVs to conduct feedback control and navigation. LiDAR has been used for indoor localization, but the sampling rate is usually too low for feedback control of UAVs. To compensate this drawback, IMU sensors are usually fused to generate high-frequency odometry, with only few extra computation resources. To achieve this goal, a real-time LiDAR inertial odometer system (RTLIO) is developed in this work to generate high-precision and high-frequency odometry for the feedback control of UAVs in an indoor environment, and this is achieved by solving cost functions that consist of the LiDAR and IMU residuals. Compared to the traditional LIO approach, the initialization process of the developed RTLIO can be achieved, even when the device is stationary. To further reduce the accumulated pose errors, loop closure and pose-graph optimization are also developed in RTLIO. To demonstrate the efficacy of the developed RTLIO, experiments with long-range trajectory are conducted, and the results indicate that the RTLIO can outperform LIO with a smaller drift. Experiments with odometry benchmark dataset (i.e., KITTI) are also conducted to compare the performance with other methods, and the results show that the RTLIO can outperform ALOAM and LOAM in terms of exhibiting a smaller time delay and greater position accuracy.