Anders Abelmann
Research Subjects
Research Interests
Anders Abelmann has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Evan M. Beckett
Benchmark Risk Group, Boston, MA, USA
3 shared publications - Jennifer S. Pierce
Benchmark Risk Group, Chicago, IL, USA
3 shared publications - Benjamin Roberts
Benchmark Risk Group, Grand Rapids, MI, USA
2 shared publications - Drew Cheatham
Benchmark Risk Group, Chicago, IL, USA
2 shared publications - Eric W. Miller
Benchmark Risk Group, Grand Rapids, MI, USA
2 shared publications Aaron M. Chapman
C Cardno ChemRisk , Washington , DC , USA
1 shared publication
Latest Publications
- 14 December 2023
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 196 (1) , 1-24
Assessment of worst-case potential airborne asbestos exposure associated with the use of cosmetic talc: application of an exponential decay model
Talc is used in cosmetic products to confer desirable properties, such as moisture absorption and smooth texture, to the finished products. Concerns have been raised about the potential presence of asbestos in products containing cosmetic talc. Reconstruction of potential asbestos exposure from the use of cosmetic talc products (assuming a trace level of asbestos) requires consideration of consumer use patterns. Although application generally only lasts seconds, exposure theoretically may continue if the consumer remains in the immediate vicinity. Most published exposure measurements have not adequately characterized the potential for continued exposure. In this analysis, estimates and measurements of airborne asbestos fiber concentrations associated with cosmetic talc use from 10 published studies were used as inputs to an exponential decay model to estimate “worst-case” exposure during and following application. The resulting geometric mean 30-min time-weighted average (TWA) concentrations were 0.006 f/cc for both puff and shaker application, for diapering, 0.0001 f/cc (adult applying baby powder) and 0.0002 f/cc (infant), and for makeup application, 0.0005 f/cc. Application of an exponential decay model to measured or estimated asbestos concentrations associated with the use of cosmetic talc products yields a conservative means to comprehensively reconstruct such exposures. Moreover, our results support that, if a cosmetic talc powder product contained a trace level of asbestos fibers, the “worst-case” airborne asbestos exposure associated with its application is low.
- 14 December 2023
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 196 (1) , 1-24
Assessment of worst-case potential airborne asbestos exposure associated with the use of cosmetic talc: application of an exponential decay model
Talc is used in cosmetic products to confer desirable properties, such as moisture absorption and smooth texture, to the finished products. Concerns have been raised about the potential presence of asbestos in products containing cosmetic talc. Reconstruction of potential asbestos exposure from the use of cosmetic talc products (assuming a trace level of asbestos) requires consideration of consumer use patterns. Although application generally only lasts seconds, exposure theoretically may continue if the consumer remains in the immediate vicinity. Most published exposure measurements have not adequately characterized the potential for continued exposure. In this analysis, estimates and measurements of airborne asbestos fiber concentrations associated with cosmetic talc use from 10 published studies were used as inputs to an exponential decay model to estimate “worst-case” exposure during and following application. The resulting geometric mean 30-min time-weighted average (TWA) concentrations were 0.006 f/cc for both puff and shaker application, for diapering, 0.0001 f/cc (adult applying baby powder) and 0.0002 f/cc (infant), and for makeup application, 0.0005 f/cc. Application of an exponential decay model to measured or estimated asbestos concentrations associated with the use of cosmetic talc products yields a conservative means to comprehensively reconstruct such exposures. Moreover, our results support that, if a cosmetic talc powder product contained a trace level of asbestos fibers, the “worst-case” airborne asbestos exposure associated with its application is low.
- 26 November 2023
- Published by Taylor & Francis in Critical Reviews in Toxicology
- Vol. 53 (10) , 611-657
An updated evaluation of reported no-observed adverse effect levels for chrysotile, amosite, and crocidolite asbestos for lung cancer and mesothelioma
This analysis updates two previous analyses that evaluated the exposure-response relationships for lung cancer and mesothelioma in chrysotile-exposed cohorts. We reviewed recently published studies, as well as updated information from previous studies. Based on the 16 studies considered for chrysotile (<10% amphibole), we identified the "no-observed adverse effect level" (NOAEL) for lung cancer and/or mesothelioma; it should be noted that smoking or previous or concurrent occupational exposure to amphiboles (if it existed) was not controlled for. NOAEL values ranged from 2.3-<11.5 f/cc-years to 1600-3200 f/cc-years for lung cancer and from 100-<400 f/cc-years to 800-1599 f/cc-years for mesothelioma. The range of best-estimate NOAELs was estimated to be 97-175 f/cc-years for lung cancer and 250-379 f/cc-years for mesothelioma. None of the six cohorts of cement or friction product manufacturing workers exhibited an increased risk at any exposure level, while all but one of the six studies of textile workers reported an increased risk at one or more exposure levels. This is likely because friction and cement workers were exposed to much shorter chrysotile fibers. Only eight cases of peritoneal mesothelioma were reported in all studies on predominantly chrysotile-exposed cohorts combined. This analysis also proposed best-estimate amosite and crocidolite NOAELs for mesothelioma derived by the application of relative potency estimates to the best-estimate chrysotile NOAELs for mesothelioma and validated by epidemiology studies with exposure-response information. The best-estimate amosite and crocidolite NOAELs for mesothelioma were 2-5 f/cc-years and 0.6-1 f/cc-years, respectively. The rate of peritoneal mesothelioma in amosite- and crocidolite-exposed cohorts was between approximately 70- to 100-fold and several-hundred-fold higher than in chrysotile-exposed cohorts, respectively. These findings will help characterize potential worker and consumer health risks associated with historical and current chrysotile, amosite, and crocidolite exposures.
- 26 November 2023
- Published by Taylor & Francis in Critical Reviews in Toxicology
- Vol. 53 (10) , 611-657
An updated evaluation of reported no-observed adverse effect levels for chrysotile, amosite, and crocidolite asbestos for lung cancer and mesothelioma
This analysis updates two previous analyses that evaluated the exposure-response relationships for lung cancer and mesothelioma in chrysotile-exposed cohorts. We reviewed recently published studies, as well as updated information from previous studies. Based on the 16 studies considered for chrysotile (<10% amphibole), we identified the "no-observed adverse effect level" (NOAEL) for lung cancer and/or mesothelioma; it should be noted that smoking or previous or concurrent occupational exposure to amphiboles (if it existed) was not controlled for. NOAEL values ranged from 2.3-<11.5 f/cc-years to 1600-3200 f/cc-years for lung cancer and from 100-<400 f/cc-years to 800-1599 f/cc-years for mesothelioma. The range of best-estimate NOAELs was estimated to be 97-175 f/cc-years for lung cancer and 250-379 f/cc-years for mesothelioma. None of the six cohorts of cement or friction product manufacturing workers exhibited an increased risk at any exposure level, while all but one of the six studies of textile workers reported an increased risk at one or more exposure levels. This is likely because friction and cement workers were exposed to much shorter chrysotile fibers. Only eight cases of peritoneal mesothelioma were reported in all studies on predominantly chrysotile-exposed cohorts combined. This analysis also proposed best-estimate amosite and crocidolite NOAELs for mesothelioma derived by the application of relative potency estimates to the best-estimate chrysotile NOAELs for mesothelioma and validated by epidemiology studies with exposure-response information. The best-estimate amosite and crocidolite NOAELs for mesothelioma were 2-5 f/cc-years and 0.6-1 f/cc-years, respectively. The rate of peritoneal mesothelioma in amosite- and crocidolite-exposed cohorts was between approximately 70- to 100-fold and several-hundred-fold higher than in chrysotile-exposed cohorts, respectively. These findings will help characterize potential worker and consumer health risks associated with historical and current chrysotile, amosite, and crocidolite exposures.
- 9 March 2020
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 27 (14) , 17250-17257
Survey of 24-h personal formaldehyde exposures in geographically distributed urban office workers in the USA
An air sampling study was conducted to evaluate personal formaldehyde exposures in a group of office workers spread across five geographical locations in the USA. Passive badge samples for formaldehyde were collected on three participants in each location, as well as in the office and home indoor microenvironments of each participant over 3 individual days. Median personal 24-h formaldehyde concentrations ranged from 9.9 to 18 μg/m3. Personal 24-h formaldehyde concentrations in one location were significantly higher than concentrations measured in the other four locations; no significant differences existed between any of the other locations. The participants in this study spent an average of 53% of their daily time in their homes, 36% at their office, and 11% in other indoor and outdoor locations. A comparison of measured 24-h personal formaldehyde concentrations and a model of average exposure based upon measured concentrations in the indoor microenvironments suggested that both the home and office formaldehyde concentrations were a strong predictor (R2 = 0.88) of overall personal exposure. The data from this study are representative of office workers in urban environments and can be used as background formaldehyde exposure levels (in the absence of specific sources) for both occupational and nonoccupational exposure assessments.
- 9 March 2020
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 27 (14) , 17250-17257
Survey of 24-h personal formaldehyde exposures in geographically distributed urban office workers in the USA
An air sampling study was conducted to evaluate personal formaldehyde exposures in a group of office workers spread across five geographical locations in the USA. Passive badge samples for formaldehyde were collected on three participants in each location, as well as in the office and home indoor microenvironments of each participant over 3 individual days. Median personal 24-h formaldehyde concentrations ranged from 9.9 to 18 μg/m3. Personal 24-h formaldehyde concentrations in one location were significantly higher than concentrations measured in the other four locations; no significant differences existed between any of the other locations. The participants in this study spent an average of 53% of their daily time in their homes, 36% at their office, and 11% in other indoor and outdoor locations. A comparison of measured 24-h personal formaldehyde concentrations and a model of average exposure based upon measured concentrations in the indoor microenvironments suggested that both the home and office formaldehyde concentrations were a strong predictor (R2 = 0.88) of overall personal exposure. The data from this study are representative of office workers in urban environments and can be used as background formaldehyde exposure levels (in the absence of specific sources) for both occupational and nonoccupational exposure assessments.
- 8 January 2019
- Published by Wiley in Journal of Applied Toxicology
- Vol. 39 (5) , 688-701
Derivation of an occupational exposure limit for diacetyl using dose‐response data from a chronic animal inhalation exposure study
Occupational exposure limits (OELs) have been previously proposed for diacetyl; however, most of these values are based on worker cohort studies that are known to have several limitations and confounders. In this analysis, an 8 hour time‐weighted average (TWA) OEL for diacetyl was derived based on data from a chronic, 2 year animal inhalation study recently released by the US National Toxicology Program. In that study, complete histopathology was conducted on male and female mice and rats exposed to 0, 12.5, 25 or 50 ppm diacetyl. Several responses in the lower respiratory tract of rats (the more sensitive species) were chosen as the critical endpoints of interest. Benchmark concentration (BMC) modeling of these endpoints was used to estimate BMC values associated with a 10% extra risk (BMC10) and the associated 95% lower confidence bound (BMCL10), which were subsequently converted to human equivalent concentrations (HECs) using a computational fluid dynamics‐physiologically based pharmacokinetic (CFD‐PBPK) model to account for interspecies dosimetry differences. A composite uncertainty factor of 8.0 was applied to the human equivalent concentration values to yield 8 hour TWA OEL values with a range of 0.16‐0.70 ppm. The recommended 8 hour TWA OEL for diacetyl vapor of 0.2 ppm, based on minimal severity of bronchiolar epithelial hyperplasia in the rat, is practical and health‐protective.
- 8 January 2019
- Published by Wiley in Journal of Applied Toxicology
- Vol. 39 (5) , 688-701
Derivation of an occupational exposure limit for diacetyl using dose‐response data from a chronic animal inhalation exposure study
Occupational exposure limits (OELs) have been previously proposed for diacetyl; however, most of these values are based on worker cohort studies that are known to have several limitations and confounders. In this analysis, an 8 hour time‐weighted average (TWA) OEL for diacetyl was derived based on data from a chronic, 2 year animal inhalation study recently released by the US National Toxicology Program. In that study, complete histopathology was conducted on male and female mice and rats exposed to 0, 12.5, 25 or 50 ppm diacetyl. Several responses in the lower respiratory tract of rats (the more sensitive species) were chosen as the critical endpoints of interest. Benchmark concentration (BMC) modeling of these endpoints was used to estimate BMC values associated with a 10% extra risk (BMC10) and the associated 95% lower confidence bound (BMCL10), which were subsequently converted to human equivalent concentrations (HECs) using a computational fluid dynamics‐physiologically based pharmacokinetic (CFD‐PBPK) model to account for interspecies dosimetry differences. A composite uncertainty factor of 8.0 was applied to the human equivalent concentration values to yield 8 hour TWA OEL values with a range of 0.16‐0.70 ppm. The recommended 8 hour TWA OEL for diacetyl vapor of 0.2 ppm, based on minimal severity of bronchiolar epithelial hyperplasia in the rat, is practical and health‐protective.
- 6 December 2017
- Published by Taylor & Francis in Inhalation Toxicology
- Vol. 29 (12-14) , 555-566
Evaluation of take-home exposure to asbestos from handling asbestos-contaminated worker clothing following the abrasive sawing of cement pipe
Although industrial uses of asbestos have declined since the 1970s, in recent years there has been a renewed interest in para-occupational (“take-home”) exposure to these fibers. The aim of this study was to quantify the release of asbestos fibers, if any, during the shaking out of crocidolite- and chrysotile-contaminated clothing in a simulated at-home setting. An exposure study was conducted in which personal and area air samples were collected during the handling (i.e. shake-out) of work clothing (shirt and pants) previously worn by an operator who had cut asbestos-containing cement pipe. During eight “loading” events, the operator cut a historically representative asbestos-containing cement pipe (10% crocidolite and 25% chrysotile) using a powered abrasive saw. Subsequently, 30-minute air samples were collected during four “shake-out” events, each of which consisted of the handling of two complete sets of contaminated work clothes. Samples were analyzed in accordance with NIOSH methods 7400 and 7402. The mean phase contrast microscopy equivalent (PCME) airborne concentrations were 0.52 f/cc (SD = 0.34 f/cc) for total asbestos fibers, 0.36 f/cc (SD = 0.26 f/cc) for chrysotile and 0.17 f/cc (SD = 0.096 f/cc) for crocidolite. Based on likely estimates of the frequency of laundering activities, and assuming that the dusty clothing (1) is not blown off in the occupational setting using compressed air and (2) is not shaken out before entering the home, a family member handling the clothing could potentially have a lifetime cumulative exposure to chrysotile and crocidolite of approximately 0.20 f/cc-year and 0.096 f/cc-year, respectively.
- 6 December 2017
- Published by Taylor & Francis in Inhalation Toxicology
- Vol. 29 (12-14) , 555-566
Evaluation of take-home exposure to asbestos from handling asbestos-contaminated worker clothing following the abrasive sawing of cement pipe
Although industrial uses of asbestos have declined since the 1970s, in recent years there has been a renewed interest in para-occupational (“take-home”) exposure to these fibers. The aim of this study was to quantify the release of asbestos fibers, if any, during the shaking out of crocidolite- and chrysotile-contaminated clothing in a simulated at-home setting. An exposure study was conducted in which personal and area air samples were collected during the handling (i.e. shake-out) of work clothing (shirt and pants) previously worn by an operator who had cut asbestos-containing cement pipe. During eight “loading” events, the operator cut a historically representative asbestos-containing cement pipe (10% crocidolite and 25% chrysotile) using a powered abrasive saw. Subsequently, 30-minute air samples were collected during four “shake-out” events, each of which consisted of the handling of two complete sets of contaminated work clothes. Samples were analyzed in accordance with NIOSH methods 7400 and 7402. The mean phase contrast microscopy equivalent (PCME) airborne concentrations were 0.52 f/cc (SD = 0.34 f/cc) for total asbestos fibers, 0.36 f/cc (SD = 0.26 f/cc) for chrysotile and 0.17 f/cc (SD = 0.096 f/cc) for crocidolite. Based on likely estimates of the frequency of laundering activities, and assuming that the dusty clothing (1) is not blown off in the occupational setting using compressed air and (2) is not shaken out before entering the home, a family member handling the clothing could potentially have a lifetime cumulative exposure to chrysotile and crocidolite of approximately 0.20 f/cc-year and 0.096 f/cc-year, respectively.
- 6 October 2016
- Published by Taylor & Francis in Inhalation Toxicology
- Vol. 28 (13) , 581-582
Authors’ response to Finkelstein’s letter to the editor regarding our recent review of ambient airborne asbestos concentrations (Abelmann et al., 2015)
- 6 October 2016
- Published by Taylor & Francis in Inhalation Toxicology
- Vol. 28 (13) , 581-582
Authors’ response to Finkelstein’s letter to the editor regarding our recent review of ambient airborne asbestos concentrations (Abelmann et al., 2015)