Unnikrishnan Gopalakrishna Panicker
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Unnikrishnan Gopalakrishna Panicker has a total of 147 co-authors. Here are the top co-authors by number of shared publications:
A. Sujith
National Institute of Technology
9 shared publicationsMekha Mariam Mathew
Department of Chemistry, NIT, Calicut 673601, India
7 shared publicationsPrajitha Kumari
Polymer Science and Technology Laboratory, Department of Chemistry, National Institute of Technology Calicut, Calicut 673601, Kerala, India
7 shared publicationsAmina Hamnas
Department of chemistry National institute of technology Calicut India
5 shared publicationsC. K. Radhakrishnan
Mohammed Abdurahiman Memorial Orphanage College, Manassery, Mokkam
5 shared publications- Sabu Thomas
School of Energy Materials Mahatma Gandhi University Kottayam Kerala India
5 shared publications
Latest Publications
- 18 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 14 (44) , 13914-13931
Glyco-engineered mannose–graphene oxide/PVA/CD hybrid coatings: a smart surface functionalization strategy for antibacterial catheter applications
Schematic illustration of the fabrication of MAN-GO/PVA/carbon dot hybrid coatings on urinary catheters for enhanced antibacterial and antibiofilm activity against bacteria.
- 18 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 14 (44) , 13914-13931
Glyco-engineered mannose–graphene oxide/PVA/CD hybrid coatings: a smart surface functionalization strategy for antibacterial catheter applications
Schematic illustration of the fabrication of MAN-GO/PVA/carbon dot hybrid coatings on urinary catheters for enhanced antibacterial and antibiofilm activity against bacteria.
- 15 October 2026
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 18 (39) , 8958-8976
Red fluorescent europium metal–organic framework (Eu-MOF) integrated sensor strip on a 3D-printed device for smartphone-assisted in situ detection of picric acid
This work focuses on the development of a portable ratiometric luminescent sensor device for the detection of picric acid (PA) in aqueous medium.
- 15 October 2026
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 18 (39) , 8958-8976
Red fluorescent europium metal–organic framework (Eu-MOF) integrated sensor strip on a 3D-printed device for smartphone-assisted in situ detection of picric acid
This work focuses on the development of a portable ratiometric luminescent sensor device for the detection of picric acid (PA) in aqueous medium.
- 30 May 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (32) , e70931
Eco‐Friendly PLA / EVA – SA ‐ ZnO Nanocomposite Packaging Films With Enhanced UV ‐Shielding, Antimicrobial, and Mechanical Properties
High‐performance and eco‐friendly packaging materials are essential for replacing conventional plastics. In this study, polylactic acid (PLA) and ethylene‐vinyl acetate (EVA) were blended to develop flexible and biodegradable films, functionally enhanced with stearic acid modified zinc oxide (ZnO) nanoparticles. The surface modification has been found to improve ZnO dispersion and interfacial compatibility within the PLA/EVA matrix, yielding a relatively uniform morphology and superior mechanical performance. The resulting composite films exhibited excellent UV‐shielding efficiency, antimicrobial activity, and thermal stability while maintaining high transparency and flexibility. Comprehensive characterization using FTIR, SEM, XRD, UV–Vis spectroscopy, and tensile testing confirmed the functional improvement being induced by the nanodimension of stearic acid modified ZnO incorporation of nanoparticles and the enhanced functional behavior. Antibacterial assays against Staphylococcus aureus and antifungal assays against Rhizopus stolonifer highlighted strong inhibition zones, confirming the films' bio‐protective potential. These findings highlight the synergistic role of EVA and surface‐modified ZnO in reinforcing PLA matrices, enabling the successful development of UV‐safe, antimicrobial, and biodegradable packaging films. The developed PLA/EVA–ZnO composites provide a sustainable alternative for active food and healthcare packaging, offering environmental compatibility combined with advanced protective functionality.
- 30 May 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (32) , e70931
Eco‐Friendly PLA / EVA – SA ‐ ZnO Nanocomposite Packaging Films With Enhanced UV ‐Shielding, Antimicrobial, and Mechanical Properties
High‐performance and eco‐friendly packaging materials are essential for replacing conventional plastics. In this study, polylactic acid (PLA) and ethylene‐vinyl acetate (EVA) were blended to develop flexible and biodegradable films, functionally enhanced with stearic acid modified zinc oxide (ZnO) nanoparticles. The surface modification has been found to improve ZnO dispersion and interfacial compatibility within the PLA/EVA matrix, yielding a relatively uniform morphology and superior mechanical performance. The resulting composite films exhibited excellent UV‐shielding efficiency, antimicrobial activity, and thermal stability while maintaining high transparency and flexibility. Comprehensive characterization using FTIR, SEM, XRD, UV–Vis spectroscopy, and tensile testing confirmed the functional improvement being induced by the nanodimension of stearic acid modified ZnO incorporation of nanoparticles and the enhanced functional behavior. Antibacterial assays against Staphylococcus aureus and antifungal assays against Rhizopus stolonifer highlighted strong inhibition zones, confirming the films' bio‐protective potential. These findings highlight the synergistic role of EVA and surface‐modified ZnO in reinforcing PLA matrices, enabling the successful development of UV‐safe, antimicrobial, and biodegradable packaging films. The developed PLA/EVA–ZnO composites provide a sustainable alternative for active food and healthcare packaging, offering environmental compatibility combined with advanced protective functionality.
- 24 May 2026
- Published by Wiley in Journal of the American Oil Chemists' Society
Chemical Modifications of Mustard Oil for Industrial Bio‐Lubricant Production: Comprehensive Characterization and Analysis
This study presents a comprehensive approach for enhancing the oxidative stability of mustard oil‐derived bio‐lubricants through chemical modifications viz.; epoxidation and transesterification. The significance of this research lies in addressing the imperative need for sustainable alternatives to conventional lubricants, particularly in the automotive industry, where environmental concerns and regulatory pressures are escalating. The modifications were confirmed via IR analysis, showcasing distinct chemical changes indicative of epoxide and ester functional groups. The acid, iodine, and peroxide values were assessed to validate the alterations in the chemical compositions. Rheological, tribological, and thermal analyses were conducted to evaluate the performance of the modified bio‐lubricant. The rheological examinations demonstrated the favorable viscosity characteristics of mustard oil after chemical modifications, crucial for efficient lubrication in engine systems. Tribological analysis revealed the friction reduction and wear protection properties, essential for prolonging engine life and enhancing efficiency. The thermal analysis highlighted the improved thermal stability, a vital attribute for maintaining lubricant integrity under high‐temperature operating conditions. The synthesized bio‐lubricant was systematically compared with a commercial engine oil, SAE 20W40, elucidating the competitive performance of the former and its potential for substitution in automotive applications. This research represents a significant contribution to the field of sustainable lubricant development, offering a viable alternative to petroleum‐based counterparts while addressing environmental concerns, and enhancing engine performance and longevity.
- 24 May 2026
- Published by Wiley in Journal of the American Oil Chemists' Society
Chemical Modifications of Mustard Oil for Industrial Bio‐Lubricant Production: Comprehensive Characterization and Analysis
This study presents a comprehensive approach for enhancing the oxidative stability of mustard oil‐derived bio‐lubricants through chemical modifications viz.; epoxidation and transesterification. The significance of this research lies in addressing the imperative need for sustainable alternatives to conventional lubricants, particularly in the automotive industry, where environmental concerns and regulatory pressures are escalating. The modifications were confirmed via IR analysis, showcasing distinct chemical changes indicative of epoxide and ester functional groups. The acid, iodine, and peroxide values were assessed to validate the alterations in the chemical compositions. Rheological, tribological, and thermal analyses were conducted to evaluate the performance of the modified bio‐lubricant. The rheological examinations demonstrated the favorable viscosity characteristics of mustard oil after chemical modifications, crucial for efficient lubrication in engine systems. Tribological analysis revealed the friction reduction and wear protection properties, essential for prolonging engine life and enhancing efficiency. The thermal analysis highlighted the improved thermal stability, a vital attribute for maintaining lubricant integrity under high‐temperature operating conditions. The synthesized bio‐lubricant was systematically compared with a commercial engine oil, SAE 20W40, elucidating the competitive performance of the former and its potential for substitution in automotive applications. This research represents a significant contribution to the field of sustainable lubricant development, offering a viable alternative to petroleum‐based counterparts while addressing environmental concerns, and enhancing engine performance and longevity.
- 6 May 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (10) , 7236-7251
Isocyanate-Free Hybrid Polyhydroxyurethane-Siloxane-Epoxy Coatings: A Sustainable Route toward High-Performance Anticorrosion Protection
- 6 May 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (10) , 7236-7251
Isocyanate-Free Hybrid Polyhydroxyurethane-Siloxane-Epoxy Coatings: A Sustainable Route toward High-Performance Anticorrosion Protection
- 1 April 2026
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 45 (4)
Performance evaluation of natural rubber‐modified mustard oil as a bio‐lubricant: A sustainable substitute for industrial applications
The environmental impact of conventional petroleum‐based lubricants prompts research into bio‐lubricants, with vegetable oils as promising alternatives due to their technical qualities and biodegradability. This study explores the formulation of bio‐lubricant systems using mustard oil as the base oil and natural rubber as an additive. The bio‐lubricants have been subjected to comprehensive characterization including thermal analysis, rheological assessments, and tribological investigations. The performance of an optimized bio‐lubricant composition has been compared with that of a commercial engine oil (SAE20W40) commonly employed in industrial applications. An optimized bio‐lubricant composition namely: M3(mustard with 5 wt.% natural rubber) demonstrated superior lubricating properties, with a 30% improvement in viscosity index, a 10.7% increase in flash point, a 55% reduction in pour point, and a 22.8% higher onset temperature compared to SAE 20W40. Additionally, the M3 system exhibited a 21% lower coefficient of friction, a 20.8% reduction in wear scar diameter, and a 36.9% increase in flash temperature parameter (FTP) over SAE 20W40. The findings also highlight that the natural rubber‐modified mustard oil system offers efficacy as a sustainable and environment‐friendly alternative to conventional lubricants in various industrial settings. This research contributes to the ongoing efforts to develop eco‐conscious lubrication solutions for a greener and more sustainable future.
- 1 April 2026
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 45 (4)
Performance evaluation of natural rubber‐modified mustard oil as a bio‐lubricant: A sustainable substitute for industrial applications
The environmental impact of conventional petroleum‐based lubricants prompts research into bio‐lubricants, with vegetable oils as promising alternatives due to their technical qualities and biodegradability. This study explores the formulation of bio‐lubricant systems using mustard oil as the base oil and natural rubber as an additive. The bio‐lubricants have been subjected to comprehensive characterization including thermal analysis, rheological assessments, and tribological investigations. The performance of an optimized bio‐lubricant composition has been compared with that of a commercial engine oil (SAE20W40) commonly employed in industrial applications. An optimized bio‐lubricant composition namely: M3(mustard with 5 wt.% natural rubber) demonstrated superior lubricating properties, with a 30% improvement in viscosity index, a 10.7% increase in flash point, a 55% reduction in pour point, and a 22.8% higher onset temperature compared to SAE 20W40. Additionally, the M3 system exhibited a 21% lower coefficient of friction, a 20.8% reduction in wear scar diameter, and a 36.9% increase in flash temperature parameter (FTP) over SAE 20W40. The findings also highlight that the natural rubber‐modified mustard oil system offers efficacy as a sustainable and environment‐friendly alternative to conventional lubricants in various industrial settings. This research contributes to the ongoing efforts to develop eco‐conscious lubrication solutions for a greener and more sustainable future.
- 27 March 2026
- Published by Taylor & Francis in Journal of Biomaterials Science, Polymer Edition
- p. 1-26
Polycarbonate urethane – poly (2-ethyl 2-oxazoline) based electrospun graft material for tympanic membrane perforation therapy
1. The tympanic membrane, a crucial component of the human auditory system for sound perception and reception, is a thin, semi-transparent, trilaminar structure comprising an outer keratinised squa...
- 27 March 2026
- Published by Taylor & Francis in Journal of Biomaterials Science, Polymer Edition
- p. 1-26
Polycarbonate urethane – poly (2-ethyl 2-oxazoline) based electrospun graft material for tympanic membrane perforation therapy
1. The tympanic membrane, a crucial component of the human auditory system for sound perception and reception, is a thin, semi-transparent, trilaminar structure comprising an outer keratinised squa...
- Open Access
- 25 March 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 8 (8) , 2645-2664
A glyco-engineered nanoplatform for fluorescence detection and adsorptive elimination of E. coli from water
Rapid and sensitive detection and removal of Escherichia coli (E. coli) in environmental and clinical settings are crucial to prevent infections and to ensure water safety. In this study, we introduce a multifunctional mannosylated graphene oxide (MAN-GO) composite that enables both fluorescence detection and adsorption of E. coli, leveraging the specific interactions between mannose and E. coli fimbriae. The MAN-GO composite demonstrated a limit of detection (LOD) as low as 1.382 × 104 CFU mL−1 in fluorimetric assays, showcasing high sensitivity and selectivity, even in the presence of interfering species. Adsorption studies reveal that MAN-GO exhibits a maximum adsorption capacity of 448.219 CFU g−1, with a rapid equilibrium time of 120 minutes, following a pseudo-second-order kinetic model and fitting well with the Langmuir adsorption isotherm (in this work, CFU g−1 is defined based on the wet mass of the sample for consistency). The maximum adsorption efficiency of the system was identified to be 88.21%, reflecting a highly effective interaction between the adsorbent and the target analyte. The results underscore the potential of the developed material for efficient adsorption applications and indicate its viability for further optimization in practical scenarios. The highly effective adsorption process, driven by the affinity of mannose-functionalized graphene oxide, facilitates a “green” capture and removal of E. coli from aqueous solutions without the need for additional chemical agents. Together, the fluorescent sensing capability and adsorption performance of MAN-GO highlight its potential as a dual-functional material for both the monitoring and mitigation of microbial contamination in aqueous systems, offering a sustainable approach to microbial detection and remediation.
- 25 March 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 8 (8) , 2645-2664
Open AccessA glyco-engineered nanoplatform for fluorescence detection and adsorptive elimination of E. coli from water
Rapid and sensitive detection and removal of Escherichia coli (E. coli) in environmental and clinical settings are crucial to prevent infections and to ensure water safety. In this study, we introduce a multifunctional mannosylated graphene oxide (MAN-GO) composite that enables both fluorescence detection and adsorption of E. coli, leveraging the specific interactions between mannose and E. coli fimbriae. The MAN-GO composite demonstrated a limit of detection (LOD) as low as 1.382 × 104 CFU mL−1 in fluorimetric assays, showcasing high sensitivity and selectivity, even in the presence of interfering species. Adsorption studies reveal that MAN-GO exhibits a maximum adsorption capacity of 448.219 CFU g−1, with a rapid equilibrium time of 120 minutes, following a pseudo-second-order kinetic model and fitting well with the Langmuir adsorption isotherm (in this work, CFU g−1 is defined based on the wet mass of the sample for consistency). The maximum adsorption efficiency of the system was identified to be 88.21%, reflecting a highly effective interaction between the adsorbent and the target analyte. The results underscore the potential of the developed material for efficient adsorption applications and indicate its viability for further optimization in practical scenarios. The highly effective adsorption process, driven by the affinity of mannose-functionalized graphene oxide, facilitates a “green” capture and removal of E. coli from aqueous solutions without the need for additional chemical agents. Together, the fluorescent sensing capability and adsorption performance of MAN-GO highlight its potential as a dual-functional material for both the monitoring and mitigation of microbial contamination in aqueous systems, offering a sustainable approach to microbial detection and remediation.
- Top Cited PapersOpen Access
- 17 March 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (17) , 15095-15118
Beyond fossil plastics: next-generation PLA-based bio-packaging for industrial applications – advances, challenges, and data-driven insights
Advances in next-generation PLA-based bio-packaging: materials design, performance enhancement, and industrial scalability.
- 17 March 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (17) , 15095-15118
Top Cited PapersOpen AccessBeyond fossil plastics: next-generation PLA-based bio-packaging for industrial applications – advances, challenges, and data-driven insights
Advances in next-generation PLA-based bio-packaging: materials design, performance enhancement, and industrial scalability.
- 28 January 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (14)
EVA‐Embedded PLA for Biodegradable Packaging: Experimental and Theoretical Insights Into Mechanical Performance
Polylactic acid (PLA) is a promising candidate among them for sustainable packaging applications. However, PLA's brittleness and limited barrier properties pose challenges in flexible packaging. To address these limitations, PLA has been modified with ethylene‐vinyl acetate (EVA) to develop flexible, high‐performance films suitable for sustainable packaging. EVA‐embedded PLA systems with different compositions were prepared using a solution casting technique. The optimized film exhibited a maximum tensile strength of 70.99 MPa, a Young's modulus of 31 MPa, and an elongation at break of 25%. Interestingly, the addition of EVA has been found to significantly enhance the percentage elongation and ductility of PLA without compromising the other required features. Thermogravimetric analysis (TGA) revealed an enhanced thermal stability for the EVA‐containing film, exhibiting the highest degradation onset temperature of approximately 450°C, while PLA alone recorded 360°C. Incorporation of EVA significantly reduced the water permeability by 70% and the solvent permeability by 19%–21% compared to neat PLA, while enhancing film transparency and biodegradability. The addition of EVA has been found to improve the transparency of PLA films by 7%. A comparison of the results with the theoretical models is also presented. A specific composition (PE3) was proposed for developing biodegradable packaging materials.
- 28 January 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (14)
EVA‐Embedded PLA for Biodegradable Packaging: Experimental and Theoretical Insights Into Mechanical Performance
Polylactic acid (PLA) is a promising candidate among them for sustainable packaging applications. However, PLA's brittleness and limited barrier properties pose challenges in flexible packaging. To address these limitations, PLA has been modified with ethylene‐vinyl acetate (EVA) to develop flexible, high‐performance films suitable for sustainable packaging. EVA‐embedded PLA systems with different compositions were prepared using a solution casting technique. The optimized film exhibited a maximum tensile strength of 70.99 MPa, a Young's modulus of 31 MPa, and an elongation at break of 25%. Interestingly, the addition of EVA has been found to significantly enhance the percentage elongation and ductility of PLA without compromising the other required features. Thermogravimetric analysis (TGA) revealed an enhanced thermal stability for the EVA‐containing film, exhibiting the highest degradation onset temperature of approximately 450°C, while PLA alone recorded 360°C. Incorporation of EVA significantly reduced the water permeability by 70% and the solvent permeability by 19%–21% compared to neat PLA, while enhancing film transparency and biodegradability. The addition of EVA has been found to improve the transparency of PLA films by 7%. A comparison of the results with the theoretical models is also presented. A specific composition (PE3) was proposed for developing biodegradable packaging materials.