Anita Lakhani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anita Lakhani has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Kandikonda Maharaj Kumari
Department of Chemistry, Faculty of Science, Dayalbagh Educational Institute, Agra, India
11 shared publications Puneet Kumar Verma
Department of Chemistry, Dayalbagh Educational Institute, Agra, India
11 shared publicationsDinesh Sah
Department of Chemistry, Dayalbagh Educational Institute, Agra, 282005, India
6 shared publicationsIsha Goyal
Department of Chemistry, Dayalbagh Educational Institute, Dayalbagh, India
6 shared publicationsSimran Bamola
Department of Chemistry, Dayalbagh Educational Institute, Dayalbagh, Agra 282005, India
5 shared publicationsK. Maharaj Kumari
Department of Chemistry, Dayalbagh Educational Institute, Agra-282005, India
4 shared publications
Latest Publications
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Unveiling the chemical composition and sources in PM2.5 at an urban and sub-urban site in Indo-Gangetic Plain: Insights from Biomass Markers
Anthropogenic biomass burning (ABB) is a major yet least understood source of atmospheric pollution, with significant implications for air quality, visibility, atmospheric chemistry, the Earth’s radiation budget and biogeochemical cycling. This study examines the chemical composition of aerosols during biomass burning (BB) and non-biomass burning (NBB) periods to assess their impact on aerosol composition and their contribution in generating oxidative stress. Sampling of PM₂.₅ and PM₁₀ was carried out at two contrasting sites one of the highly polluted cities of Indo-Gangetic Plain (IGP), Agra: Dayalbagh (suburban) and Rambagh (urban), from December, 2022 to November, 2024. The samples were analyzed for dicarboxylic acids (DCAs), sugars, organic and elemental carbon (OC/EC), water-soluble inorganic ions (WSIIs), metals and polycyclic aromatic hydrocarbons (PAHs). Moderate Resolution Imaging Spectroradiometer (MODIS) and Fire Information for Resource Management System (FIRMS) data identified intense fire hotspots over northwestern India (Punjab–Haryana) during BB, coinciding with elevated particulate concentrations. The mean concentration of PM₂.₅ and PM₁₀ increased considerably during BB (PM₂.₅: 101.1 ± 74.4 µg m⁻³ at Dayalbagh, 120.0 ± 57.5 µg m⁻³ at Rambagh; PM₁₀: 161.2 ± 67.3 and 184.4 ± 61.7 µg m⁻³, respectively) compared to NBB. The Pearson correlation analysis showed that carbonaceous species and biomass tracers (DCAs, K⁺, levoglucosan) showed strong positive correlations (r > 0.8), confirming the influence of agricultural residue and biofuel combustion. Secondary ions (SO₄²⁻, NO₃⁻, NH₄⁺) displayed enhanced interrelationships (r = 0.75–0.77) during NBB, indicating increased secondary aerosol formation. The oxidative potential, assessed using the dithiothreitol (DTT) assay, exhibited markedly higher activity in fine particles (r2 = 0.70 and 0.79) and during BB (DTTv: 18.2 ± 10.1 pmol min⁻¹ m⁻³ at Dayalbagh, 17.1 ± 15.0 pmol min⁻¹ m⁻³ at Rambagh) compared to NBB (7.0 ± 4.0 and 10.0 ± 2.4 pmol min⁻¹ m⁻³, respectively). The correlation between DTTv and biomass tracers (oxalic acid (C2), malonic acid (C3), adipic acid (C6), levoglucosan (Lev), arabitol (Arab); r = 0.50-0.83), OC/EC (r = 0.52-0.70), metals (Fe, Mn, K, Na, Ni, Mn, Cr; r = 0.52-0.64) during BB period suggest higher redox activity during this period. Positive Matrix Factorization (PMF) identified four dominant sources: biomass burning (31–35%), vehicular emissions (26–30%), industrial activities (18–22%), and crustal dust (10–13%). Thus, BB emissions significantly enhanced PM loadings and oxidative potential, posing elevated health risks. The findings highlight the synergistic role of biomass combustion and urban emissions in amplifying aerosol toxicity and degrading air quality over the IGP.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessUnveiling the chemical composition and sources in PM2.5 at an urban and sub-urban site in Indo-Gangetic Plain: Insights from Biomass Markers
Anthropogenic biomass burning (ABB) is a major yet least understood source of atmospheric pollution, with significant implications for air quality, visibility, atmospheric chemistry, the Earth’s radiation budget and biogeochemical cycling. This study examines the chemical composition of aerosols during biomass burning (BB) and non-biomass burning (NBB) periods to assess their impact on aerosol composition and their contribution in generating oxidative stress. Sampling of PM₂.₅ and PM₁₀ was carried out at two contrasting sites one of the highly polluted cities of Indo-Gangetic Plain (IGP), Agra: Dayalbagh (suburban) and Rambagh (urban), from December, 2022 to November, 2024. The samples were analyzed for dicarboxylic acids (DCAs), sugars, organic and elemental carbon (OC/EC), water-soluble inorganic ions (WSIIs), metals and polycyclic aromatic hydrocarbons (PAHs). Moderate Resolution Imaging Spectroradiometer (MODIS) and Fire Information for Resource Management System (FIRMS) data identified intense fire hotspots over northwestern India (Punjab–Haryana) during BB, coinciding with elevated particulate concentrations. The mean concentration of PM₂.₅ and PM₁₀ increased considerably during BB (PM₂.₅: 101.1 ± 74.4 µg m⁻³ at Dayalbagh, 120.0 ± 57.5 µg m⁻³ at Rambagh; PM₁₀: 161.2 ± 67.3 and 184.4 ± 61.7 µg m⁻³, respectively) compared to NBB. The Pearson correlation analysis showed that carbonaceous species and biomass tracers (DCAs, K⁺, levoglucosan) showed strong positive correlations (r > 0.8), confirming the influence of agricultural residue and biofuel combustion. Secondary ions (SO₄²⁻, NO₃⁻, NH₄⁺) displayed enhanced interrelationships (r = 0.75–0.77) during NBB, indicating increased secondary aerosol formation. The oxidative potential, assessed using the dithiothreitol (DTT) assay, exhibited markedly higher activity in fine particles (r2 = 0.70 and 0.79) and during BB (DTTv: 18.2 ± 10.1 pmol min⁻¹ m⁻³ at Dayalbagh, 17.1 ± 15.0 pmol min⁻¹ m⁻³ at Rambagh) compared to NBB (7.0 ± 4.0 and 10.0 ± 2.4 pmol min⁻¹ m⁻³, respectively). The correlation between DTTv and biomass tracers (oxalic acid (C2), malonic acid (C3), adipic acid (C6), levoglucosan (Lev), arabitol (Arab); r = 0.50-0.83), OC/EC (r = 0.52-0.70), metals (Fe, Mn, K, Na, Ni, Mn, Cr; r = 0.52-0.64) during BB period suggest higher redox activity during this period. Positive Matrix Factorization (PMF) identified four dominant sources: biomass burning (31–35%), vehicular emissions (26–30%), industrial activities (18–22%), and crustal dust (10–13%). Thus, BB emissions significantly enhanced PM loadings and oxidative potential, posing elevated health risks. The findings highlight the synergistic role of biomass combustion and urban emissions in amplifying aerosol toxicity and degrading air quality over the IGP.
- 5 March 2026
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Processes & Impacts
- Vol. 28 (5) , 1243-1261
Seasonal variability and source diagnostics of ambient PAHs in Agra, India, using the CBPF and their health risk evaluation
This study addresses the critical issue of polycyclic aromatic hydrocarbons (PAHs) bound to total suspended particulate (TSP) in urban-industrial environments, focusing on an understudied residential area in Agra, India—a city within the heavily polluted Indo-Gangetic Plain (IGP). The research aimed to investigate seasonal variations in PAH concentrations, identify their emission sources, and assess the associated health risks. TSP samples were collected during cold weather months (CWM; January and February 2023) and hot weather months (HWM; March–May 2023) and analysed for 16 priority PAHs. The results showed notably higher TSP (349.4 ± 56.2 µg m−3) and PAH (1857.3 ng m−3) levels in CWM compared to HWM (266.5 ± 33.1 µg m−3 and 721.7 ng m−3), with high-molecular-weight PAHs dominating in CWM and 3-ring PAHs prevailing in HWM. Source apportionment using diagnostic ratios and Positive Matrix Factorization (PMF) indicated vehicular emissions, fossil fuel combustion, and industrial activities as primary contributors. Conditional Bivariate Probability Function (CBPF) analysis revealed seasonal shifts in dominant source regions—southwest in HWM and northeast in CWM—correlating with local wind patterns. Health risk assessments based on benzo(a)pyrene toxicity equivalent (BaPeq-TEQ), benzo(a)pyrene mutagenic equivalent (BaPeq-MEQ), and Incremental Lifetime Cancer Risk (ILCR) highlighted carcinogenic and mutagenic risks from BaP, BbF, and DbA via dermal and ingestion pathways. These findings underscore the need for season-specific air pollution mitigation strategies, cleaner fuels, and stricter emissions controls. The study contributes to environmental chemistry by enhancing the understanding of TSP-bound PAH behaviour, exposure pathways, and health risks in urban residential zones, thereby supporting evidence-based policymaking aligned with Sustainable Development Goals 3 and 11.
- 5 March 2026
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Processes & Impacts
- Vol. 28 (5) , 1243-1261
Seasonal variability and source diagnostics of ambient PAHs in Agra, India, using the CBPF and their health risk evaluation
This study addresses the critical issue of polycyclic aromatic hydrocarbons (PAHs) bound to total suspended particulate (TSP) in urban-industrial environments, focusing on an understudied residential area in Agra, India—a city within the heavily polluted Indo-Gangetic Plain (IGP). The research aimed to investigate seasonal variations in PAH concentrations, identify their emission sources, and assess the associated health risks. TSP samples were collected during cold weather months (CWM; January and February 2023) and hot weather months (HWM; March–May 2023) and analysed for 16 priority PAHs. The results showed notably higher TSP (349.4 ± 56.2 µg m−3) and PAH (1857.3 ng m−3) levels in CWM compared to HWM (266.5 ± 33.1 µg m−3 and 721.7 ng m−3), with high-molecular-weight PAHs dominating in CWM and 3-ring PAHs prevailing in HWM. Source apportionment using diagnostic ratios and Positive Matrix Factorization (PMF) indicated vehicular emissions, fossil fuel combustion, and industrial activities as primary contributors. Conditional Bivariate Probability Function (CBPF) analysis revealed seasonal shifts in dominant source regions—southwest in HWM and northeast in CWM—correlating with local wind patterns. Health risk assessments based on benzo(a)pyrene toxicity equivalent (BaPeq-TEQ), benzo(a)pyrene mutagenic equivalent (BaPeq-MEQ), and Incremental Lifetime Cancer Risk (ILCR) highlighted carcinogenic and mutagenic risks from BaP, BbF, and DbA via dermal and ingestion pathways. These findings underscore the need for season-specific air pollution mitigation strategies, cleaner fuels, and stricter emissions controls. The study contributes to environmental chemistry by enhancing the understanding of TSP-bound PAH behaviour, exposure pathways, and health risks in urban residential zones, thereby supporting evidence-based policymaking aligned with Sustainable Development Goals 3 and 11.
- 2 September 2025
- Published by Elsevier in Atmospheric Pollution Research
- Vol. 17 (1)
Real time monitoring of VOCs and their OH reactivity: Links with OFP and SOA formation at suburban site of Indo-Gangetic plain
- 2 September 2025
- Published by Elsevier in Atmospheric Pollution Research
- Vol. 17 (1)
Real time monitoring of VOCs and their OH reactivity: Links with OFP and SOA formation at suburban site of Indo-Gangetic plain
- 24 June 2025
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Processes & Impacts
- Vol. 27 (11) , 3440-3456
Interplay between oxidative potential and health risk of PM 2.5 -bound metals at a site of the Indo-Gangetic Plain—exploring the influence of biomass burning
Biomass burning (BB) contributes to deteriorating air quality, particularly elevated haze periods during winter. This study investigates the impact of BB aerosols on PM2.5 composition and toxicity at a suburban site in Agra, India, during both haze and non-haze periods. Satellite and model retrievals alongside meteorological parameters were studied to estimate air mass trajectories and total fire events to assess the contribution of long-range transported BB aerosols. The samples were collected and analyzed for metal composition using ICP-OES and oxidative potential using dithiothreitol (DTT) assay. The total PM2.5 mass was significantly found higher in haze periods (236.6 ± 19.9 μg m−3) compared to non-haze periods (137.1 ± 45.7 μg m−3). Potassium (K), a signature marker of BB, dominated the metal composition along with carcinogenic metals Cd, Cr, Ni, and Pb and was also prominent during haze periods. The DTT assay showed higher ability to generate oxidative stress during haze periods, strongly correlating with metals, Cr (r = 0.81), Cu (r = 0.65), Mn (r = 0.67), Fe (r = 0.66), and Zn (r = 0.50), along with BB-related metals, K (r = 0.90), Na (r = 0.91), and Mg (r = 0.81), indicating their role in ROS generation. The health risk was estimated through health risk assessment (HRA) that aligns with OP measurements, indicating inhalation as the primary exposure pathway and adults as the higher risk group (HI = 2.9, CR = 4.3 × 10−4) due to elevated exposures mainly to Cr, Cd, Mn, Ni, and Pb. This suggests increased non-carcinogenic and carcinogenic risks due to the contribution of BB-derived metals to oxidative stress. Positive matrix factorization identified agricultural dust and BB (46.9%) as the major contributors to PM2.5. Thus, based on these findings, implementing effective mitigation policies to control BB emissions, particularly during winter which contributes to haze periods, is crucial.
- 24 June 2025
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Processes & Impacts
- Vol. 27 (11) , 3440-3456
Interplay between oxidative potential and health risk of PM 2.5 -bound metals at a site of the Indo-Gangetic Plain—exploring the influence of biomass burning
Biomass burning (BB) contributes to deteriorating air quality, particularly elevated haze periods during winter. This study investigates the impact of BB aerosols on PM2.5 composition and toxicity at a suburban site in Agra, India, during both haze and non-haze periods. Satellite and model retrievals alongside meteorological parameters were studied to estimate air mass trajectories and total fire events to assess the contribution of long-range transported BB aerosols. The samples were collected and analyzed for metal composition using ICP-OES and oxidative potential using dithiothreitol (DTT) assay. The total PM2.5 mass was significantly found higher in haze periods (236.6 ± 19.9 μg m−3) compared to non-haze periods (137.1 ± 45.7 μg m−3). Potassium (K), a signature marker of BB, dominated the metal composition along with carcinogenic metals Cd, Cr, Ni, and Pb and was also prominent during haze periods. The DTT assay showed higher ability to generate oxidative stress during haze periods, strongly correlating with metals, Cr (r = 0.81), Cu (r = 0.65), Mn (r = 0.67), Fe (r = 0.66), and Zn (r = 0.50), along with BB-related metals, K (r = 0.90), Na (r = 0.91), and Mg (r = 0.81), indicating their role in ROS generation. The health risk was estimated through health risk assessment (HRA) that aligns with OP measurements, indicating inhalation as the primary exposure pathway and adults as the higher risk group (HI = 2.9, CR = 4.3 × 10−4) due to elevated exposures mainly to Cr, Cd, Mn, Ni, and Pb. This suggests increased non-carcinogenic and carcinogenic risks due to the contribution of BB-derived metals to oxidative stress. Positive matrix factorization identified agricultural dust and BB (46.9%) as the major contributors to PM2.5. Thus, based on these findings, implementing effective mitigation policies to control BB emissions, particularly during winter which contributes to haze periods, is crucial.
- 30 September 2024
- Published by Springer Nature in Air Quality, Atmosphere & Health
- p. 1-20
Echoes of change: dynamics of air quality and health in the new normal
- 30 September 2024
- Published by Springer Nature in Air Quality, Atmosphere & Health
- p. 1-20
Echoes of change: dynamics of air quality and health in the new normal
- 1 January 2024
- Published by RSYN Research
- Vol. 07 (01) , 29-44
Unlocking PM1-Bound Cytotoxicity: Where Do We Stand and What's Next?
Particulate matter (PM) in air stands as a crucial environmental health concern, implicated in various diseases based on extensive epidemiological investigations. Associations between PM exposure and conditions such as acute respiratory infections, lung cancer, and chronic respiratory and cardiovascular diseases have been well-established. Despite incomplete To better understand how these biological processes work, in vitro studies have shown that PM1 causes harmful effects on cells, damage to DNA, and increased production of proinflammatory cytokines. Biomass burning and vehicular emissions contribute to PM emissions, which play pivotal roles in altering ambient environment. This encompasses its chemical, physical, and toxicological characteristics. This comprehensive chapter consolidates findings on the physiochemical features of PM1 particulates, with an aerodynamic diameter of ≤ 1 µm (PM1), that focus on impact on health and the environment. PM1 particulates have a cytotoxic activity that poses a threat to health. Furthermore, the review extensively explores the dynamics of cytotoxicity associated with PM1 in various environmental contexts at national and international levels. The amalgamation of insights provides a nuanced perspective on the intricacies of PM1-bound cytotoxicity, thereby enhancing our understanding of air quality challenges in both Indian and global contexts. To the best of our knowledge, this is the first review article on the cytotoxicity of PM1 particles.
- 1 January 2024
- Published by RSYN Research
- Vol. 07 (01) , 29-44
Unlocking PM1-Bound Cytotoxicity: Where Do We Stand and What's Next?
Particulate matter (PM) in air stands as a crucial environmental health concern, implicated in various diseases based on extensive epidemiological investigations. Associations between PM exposure and conditions such as acute respiratory infections, lung cancer, and chronic respiratory and cardiovascular diseases have been well-established. Despite incomplete To better understand how these biological processes work, in vitro studies have shown that PM1 causes harmful effects on cells, damage to DNA, and increased production of proinflammatory cytokines. Biomass burning and vehicular emissions contribute to PM emissions, which play pivotal roles in altering ambient environment. This encompasses its chemical, physical, and toxicological characteristics. This comprehensive chapter consolidates findings on the physiochemical features of PM1 particulates, with an aerodynamic diameter of ≤ 1 µm (PM1), that focus on impact on health and the environment. PM1 particulates have a cytotoxic activity that poses a threat to health. Furthermore, the review extensively explores the dynamics of cytotoxicity associated with PM1 in various environmental contexts at national and international levels. The amalgamation of insights provides a nuanced perspective on the intricacies of PM1-bound cytotoxicity, thereby enhancing our understanding of air quality challenges in both Indian and global contexts. To the best of our knowledge, this is the first review article on the cytotoxicity of PM1 particles.
- 1 January 2024
- Published by RSYN Research
- Vol. 07 (01) , 65-90
Understanding Polycyclic Aromatic Hydrocarbons (PAHs) and Derivatives: Sources, Properties, and Health Impacts
PAHs, persistent organic pollutants (POPs), composed of 2-7 fused aromatic rings, emerge from processes involving incomplete combustion of organic materials. Released into the ambient air as vapors or adsorbed onto airborne particulate matter, these compounds undergo complex photochemical reactions with atmospheric pollutants such as ozone, NOX, SOX, and OH radicals and result in the formation of its derivatives which possess remarkably higher toxicity and carcinogenicity than its parent PAHs. This chapter delves into the contemporary knowledge surrounding Polycyclic Aromatic Hydrocarbons (PAHs) and their derivatives, shedding light on their sources, formation mechanisms, and inherent properties. It also comprehensively reviews the global status.
- 1 January 2024
- Published by RSYN Research
- Vol. 07 (01) , 65-90
Understanding Polycyclic Aromatic Hydrocarbons (PAHs) and Derivatives: Sources, Properties, and Health Impacts
PAHs, persistent organic pollutants (POPs), composed of 2-7 fused aromatic rings, emerge from processes involving incomplete combustion of organic materials. Released into the ambient air as vapors or adsorbed onto airborne particulate matter, these compounds undergo complex photochemical reactions with atmospheric pollutants such as ozone, NOX, SOX, and OH radicals and result in the formation of its derivatives which possess remarkably higher toxicity and carcinogenicity than its parent PAHs. This chapter delves into the contemporary knowledge surrounding Polycyclic Aromatic Hydrocarbons (PAHs) and their derivatives, shedding light on their sources, formation mechanisms, and inherent properties. It also comprehensively reviews the global status.
- 13 November 2023
- Published by Elsevier in Chemosphere
- Vol. 347, 140693
Addressing ozone pollution to promote United Nations sustainable development goal 2: Ensuring global food security
- 13 November 2023
- Published by Elsevier in Chemosphere
- Vol. 347, 140693
Addressing ozone pollution to promote United Nations sustainable development goal 2: Ensuring global food security
- 26 August 2023
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 195 (9) , 1-21
The role of chemical fractionation in risk assessment of toxic metals: a review
The identification of highly toxic metals like Cd, Ni, Pb, Cr, Co or Cu in ambient particulate matter (PM) has garnered a lot of interest recently. Exposure to toxic metals, including carcinogenic ones, at levels above recommended limits, can significantly affect human health. Prolonged exposure to even trace amounts of toxic or essential metals can also have negative health impacts. In order to assess significant risks, it is crucial to govern the concentrations of bioavailable/bio-accessible metals that are available in PM. Estimating the total metal concentrations in PM is only an approximation of metal toxicity. This review provides an overview of various procedures for extracting soluble toxic metals from PM and the importance of chemical fractionation in risk assessment. It is observed that the environmental risk indices such as bioavailability index (BI), contamination factor (CF) and risk assessment code (RAC) are specifically influenced by the concentration of these metals in a particular fraction. Additionally, there is compelling evidence that health risks assessed using total metal concentrations may be overestimated, therefore, the metal toxicity assessment is more accurate and more sensitive to the concentration of the bioavailable/bio-accessible fraction than the total metal concentrations. Hence, chemical fractionation of toxic metals can serve as an effective tool for developing environmental protection laws and improving air quality monitoring programs for public health. Graphical Abstract
- 26 August 2023
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 195 (9) , 1-21
The role of chemical fractionation in risk assessment of toxic metals: a review
The identification of highly toxic metals like Cd, Ni, Pb, Cr, Co or Cu in ambient particulate matter (PM) has garnered a lot of interest recently. Exposure to toxic metals, including carcinogenic ones, at levels above recommended limits, can significantly affect human health. Prolonged exposure to even trace amounts of toxic or essential metals can also have negative health impacts. In order to assess significant risks, it is crucial to govern the concentrations of bioavailable/bio-accessible metals that are available in PM. Estimating the total metal concentrations in PM is only an approximation of metal toxicity. This review provides an overview of various procedures for extracting soluble toxic metals from PM and the importance of chemical fractionation in risk assessment. It is observed that the environmental risk indices such as bioavailability index (BI), contamination factor (CF) and risk assessment code (RAC) are specifically influenced by the concentration of these metals in a particular fraction. Additionally, there is compelling evidence that health risks assessed using total metal concentrations may be overestimated, therefore, the metal toxicity assessment is more accurate and more sensitive to the concentration of the bioavailable/bio-accessible fraction than the total metal concentrations. Hence, chemical fractionation of toxic metals can serve as an effective tool for developing environmental protection laws and improving air quality monitoring programs for public health. Graphical Abstract