Peter Timmerman
Research Subjects
Peter Timmerman has a total of 86 co-authors. Here are the top co-authors by number of shared publications:
- Jan Herman Van Maarseveen
University of Amsterdam Science Park 904
7 shared publications Dominik Bernhagen
Pepscan Therapeutics
6 shared publications- Gaston J. J. Richelle
Van ‘t Hoff Institute for Molecular Sciences (HIMS) Science Park 904 1098 XH Amsterdam The Netherlands
6 shared publications - Henk Hiemstra
Bioinspired Organic Synthesis Van't Hoff Institute for Molecular Sciences (HIMS) Science Park 904 1098 XH Amsterdam The Netherlands
4 shared publications - Tilman Mathias Hackeng
Department of Biochemistry, Cardiovascular Research Institute Maastricht (CARIM), University Maastricht, Maastricht, The Netherlands
4 shared publications - Jakub Dostalek
LiST-Life Sciences Technology, Danube Private University
3 shared publications
Latest Publications
- Open Access
Chemokine-binding all-D-CLIPS™ peptides identified using mirror-image phage display
Chemokines are secreted blood proteins, which steer leukocyte migration in the inflammatory response. Neutralization of chemokines is believed to be a beneficial therapeutic strategy for the treatment of inflammation-associated diseases. Proteolytically stable chemokine-binding peptides could be suitable candidates for the development of chemokine-neutralizing agents. Here, we report mirror-image phage display selection of cyclic all-D-peptides against the C-X-C motif chemokine ligand 8 (CXCL8). Selection yielded structurally diverse all-D-peptides with sub-micromolar affinity to the target CXCL8 chemokine and different selectivity to related chemokines. Binding of these all-D-peptides caused dissociation of the native CXCL8 dimer and disruption of its binding to GAGs, without effect on in vitro cell migration. This work demonstrates the example of mirror-image phage display selection of cyclized all-D-peptides and its utility for the development of chemokine-binding agents.
Open AccessChemokine-binding all-D-CLIPS™ peptides identified using mirror-image phage display
Chemokines are secreted blood proteins, which steer leukocyte migration in the inflammatory response. Neutralization of chemokines is believed to be a beneficial therapeutic strategy for the treatment of inflammation-associated diseases. Proteolytically stable chemokine-binding peptides could be suitable candidates for the development of chemokine-neutralizing agents. Here, we report mirror-image phage display selection of cyclic all-D-peptides against the C-X-C motif chemokine ligand 8 (CXCL8). Selection yielded structurally diverse all-D-peptides with sub-micromolar affinity to the target CXCL8 chemokine and different selectivity to related chemokines. Binding of these all-D-peptides caused dissociation of the native CXCL8 dimer and disruption of its binding to GAGs, without effect on in vitro cell migration. This work demonstrates the example of mirror-image phage display selection of cyclized all-D-peptides and its utility for the development of chemokine-binding agents.
- Open Access
- 13 June 2022
- Published by MDPI AG in Biomolecules
- Vol. 12 (6) , 829
Molecular Detection of Venous Thrombosis in Mouse Models Using SPECT/CT
The efficacy of thrombolysis is inversely correlated with thrombus age. During early thrombogenesis, activated factor XIII (FXIIIa) cross-links 2-AP to fibrin to protect it from early lysis. This was exploited to develop an 2-AP-based imaging agent to detect early clot formation likely susceptible to thrombolysis treatment. In this study, this imaging probe was improved and validated using In SPECT/CT in a mouse thrombosis model. In vitro fluorescent- and In-labelled imaging probe-to-fibrin cross-linking assays were performed. Thrombus formation was induced in C57Bl/6 mice by endothelial damage (FeCl) or by ligation (stenosis) of the infrarenal vena cava (IVC). Two or six hours post-surgery, mice were injected with In-DTPA-A16 and ExiTron Nano 12000, and binding of the imaging tracer to thrombi was assessed by SPECT/CT. Subsequently, ex vivo IVCs were subjected to autoradiography and histochemical analysis for platelets and fibrin. Efficient in vitro cross-linking of A16 imaging probe to fibrin was obtained. In vivo IVC thrombosis models yielded stable platelet-rich thrombi with FeCl and fibrin and red cell-rich thrombi with stenosis. In the stenosis model, clot formation in the vena cava corresponded with a SPECT hotspot using an A16 imaging probe as a molecular tracer. The fibrin-targeting A16 probe showed specific binding to mouse thrombi in in vitro assays and the in vivo DVT model. The use of specific and covalent fibrin-binding probes might enable the clinical non-invasive imaging of early and active thrombosis.- 13 June 2022
- Published by MDPI AG in Biomolecules
- Vol. 12 (6) , 829
Open AccessMolecular Detection of Venous Thrombosis in Mouse Models Using SPECT/CT
The efficacy of thrombolysis is inversely correlated with thrombus age. During early thrombogenesis, activated factor XIII (FXIIIa) cross-links 2-AP to fibrin to protect it from early lysis. This was exploited to develop an 2-AP-based imaging agent to detect early clot formation likely susceptible to thrombolysis treatment. In this study, this imaging probe was improved and validated using In SPECT/CT in a mouse thrombosis model. In vitro fluorescent- and In-labelled imaging probe-to-fibrin cross-linking assays were performed. Thrombus formation was induced in C57Bl/6 mice by endothelial damage (FeCl) or by ligation (stenosis) of the infrarenal vena cava (IVC). Two or six hours post-surgery, mice were injected with In-DTPA-A16 and ExiTron Nano 12000, and binding of the imaging tracer to thrombi was assessed by SPECT/CT. Subsequently, ex vivo IVCs were subjected to autoradiography and histochemical analysis for platelets and fibrin. Efficient in vitro cross-linking of A16 imaging probe to fibrin was obtained. In vivo IVC thrombosis models yielded stable platelet-rich thrombi with FeCl and fibrin and red cell-rich thrombi with stenosis. In the stenosis model, clot formation in the vena cava corresponded with a SPECT hotspot using an A16 imaging probe as a molecular tracer. The fibrin-targeting A16 probe showed specific binding to mouse thrombi in in vitro assays and the in vivo DVT model. The use of specific and covalent fibrin-binding probes might enable the clinical non-invasive imaging of early and active thrombosis. - Open Access
Rapid stem cell spreading induced by high affinity α 5 β 1 integrin-selective bicyclic RGD peptide in biomimetic hydrogels
Cell-matrix interactions form a crucial parameter for the design of a synthetic extracellular matrix (ECM), as they ultimately dictate cell fate and functions. Universally, synthetic biomaterials are conjugated with a linear or cyclic Arg-Gly-Asp (RGD) peptide to establish a direct link of the ECM with the cell. These peptides, however, present low binding affinities and lack selectivity towards integrin subtypes presented on the cell membrane. Here, a highly biomimetic synthetic ECM based on polyisocyanides (PIC) that has been decorated with bicyclic peptides that show a high affinity towards specific integrin subtypes is presented. 3D cell studies show that human adipose-derived stem cells (hASCs) in matrices carrying the optimized bicyclic α 5 β 1 -integrin binder, spread within 24 hours, which is much faster than in other PIC gels, including the default RGD-decorated gel, but also much faster than in the positive Matrigel control. YAP/TAZ staining shows that the rapid morphological change in the 3D microenvironments is YAP independent. The data highlights that the design of synthetic matrices with appropriate, optimized guiding signals is key to guide cells towards a predetermined outcome.
Open AccessRapid stem cell spreading induced by high affinity α 5 β 1 integrin-selective bicyclic RGD peptide in biomimetic hydrogels
Cell-matrix interactions form a crucial parameter for the design of a synthetic extracellular matrix (ECM), as they ultimately dictate cell fate and functions. Universally, synthetic biomaterials are conjugated with a linear or cyclic Arg-Gly-Asp (RGD) peptide to establish a direct link of the ECM with the cell. These peptides, however, present low binding affinities and lack selectivity towards integrin subtypes presented on the cell membrane. Here, a highly biomimetic synthetic ECM based on polyisocyanides (PIC) that has been decorated with bicyclic peptides that show a high affinity towards specific integrin subtypes is presented. 3D cell studies show that human adipose-derived stem cells (hASCs) in matrices carrying the optimized bicyclic α 5 β 1 -integrin binder, spread within 24 hours, which is much faster than in other PIC gels, including the default RGD-decorated gel, but also much faster than in the positive Matrigel control. YAP/TAZ staining shows that the rapid morphological change in the 3D microenvironments is YAP independent. The data highlights that the design of synthetic matrices with appropriate, optimized guiding signals is key to guide cells towards a predetermined outcome.
- Open Access
- 3 June 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 125 (23) , 12960-12967
Thin-Film Polyisocyanide-Based Hydrogels for Affinity Biosensors
- 3 June 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 125 (23) , 12960-12967
Open AccessThin-Film Polyisocyanide-Based Hydrogels for Affinity Biosensors
- Open Access
- 16 March 2021
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 9 (12) , 4329-4342
Bicyclic RGD peptides enhance nerve growth in synthetic PEG-based Anisogels
AECMs imparting integrin selectivity (α5β1 and αvβ3) and directional guidance cues are developed using MMP degradable PEG hydrogels, functionalized with bicyclic RGD peptides, and including aligned magnetic, short fibers for 3D oriented nerve growth.
- 16 March 2021
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 9 (12) , 4329-4342
Open AccessBicyclic RGD peptides enhance nerve growth in synthetic PEG-based Anisogels
AECMs imparting integrin selectivity (α5β1 and αvβ3) and directional guidance cues are developed using MMP degradable PEG hydrogels, functionalized with bicyclic RGD peptides, and including aligned magnetic, short fibers for 3D oriented nerve growth.
- 3 July 2019
- Published by American Chemical Society (ACS) in ACS Combinatorial Science
- Vol. 21 (8) , 598-607
High-Affinity α5β1-Integrin-Selective Bicyclic RGD Peptides Identified via Screening of Designed Random Libraries
We report the identification of high-affinity and selectivity integrin α5β1-binding bicyclic peptides via “random design”, i.e. the screening of libraries comprising the universal integrin-binding sequence Arg-Gly-Asp (RGD) in the first loop in combina-tion with a randomized sequence (XXX) in the second loop. Screening of 1st generation libraries for α5β1-binding peptides yielded a triple-digit nanomolar bicyclic α5β1-binder (CT3RGDcT3AYGCT3, IC50: 406 nM). Next generation libraries were de-signed by partially varying the structure of the strongest 1st generation lead inhibitor and screened for improved affinities and selectivities for this receptor. In this way, we identified three high-affinity α5β1-binders (CT3RGDcT3AYJCT3, J: D-Leu, IC50: 90 nM; CT3RGDcT3AYaCT3, IC50: 156 nM; CT3RGDcT3AWGCT3, IC50: 173 nM), of which one even showed a higher α5β1-affinity than the 32 amino acid benchmark peptide knottin-RGD (IC50: 114 nM). Affinity for integrin α5β1 was con-firmed by SPFS analysis showing a Kd of 4.1 nM for Cy5-labeled RGD-bicycle CT3RGDcT3AYJCT3 (J: D-Leu), and a some-what higher Kd (9.0 nM) for Cy5-labeled knottin-RGD. The α5β1-bicycles, e.g. CT3RGDcT3AYJCT3 (J: D-Leu), showed excel-lent selectivities over αvβ5 (IC50 ratio α5β1/αvβ5 between <0.009 and 0.039) and acceptable selectivities over αvβ3 (IC50 ratios α5β1/αvβ3 between 0.090 and 0.157). In vitro staining of adipose-derived stem cells with Cy5-labeled peptides using confocal microscopy revealed strong binding of the α5β1-selective bicycle CT3RGDcT3AWGCT3 to integrins in their natural environ-ment, illustrating the high potential of these RGD-bicycles as markers for α5β1-integrin expression.
- 3 July 2019
- Published by American Chemical Society (ACS) in ACS Combinatorial Science
- Vol. 21 (8) , 598-607
High-Affinity α5β1-Integrin-Selective Bicyclic RGD Peptides Identified via Screening of Designed Random Libraries
We report the identification of high-affinity and selectivity integrin α5β1-binding bicyclic peptides via “random design”, i.e. the screening of libraries comprising the universal integrin-binding sequence Arg-Gly-Asp (RGD) in the first loop in combina-tion with a randomized sequence (XXX) in the second loop. Screening of 1st generation libraries for α5β1-binding peptides yielded a triple-digit nanomolar bicyclic α5β1-binder (CT3RGDcT3AYGCT3, IC50: 406 nM). Next generation libraries were de-signed by partially varying the structure of the strongest 1st generation lead inhibitor and screened for improved affinities and selectivities for this receptor. In this way, we identified three high-affinity α5β1-binders (CT3RGDcT3AYJCT3, J: D-Leu, IC50: 90 nM; CT3RGDcT3AYaCT3, IC50: 156 nM; CT3RGDcT3AWGCT3, IC50: 173 nM), of which one even showed a higher α5β1-affinity than the 32 amino acid benchmark peptide knottin-RGD (IC50: 114 nM). Affinity for integrin α5β1 was con-firmed by SPFS analysis showing a Kd of 4.1 nM for Cy5-labeled RGD-bicycle CT3RGDcT3AYJCT3 (J: D-Leu), and a some-what higher Kd (9.0 nM) for Cy5-labeled knottin-RGD. The α5β1-bicycles, e.g. CT3RGDcT3AYJCT3 (J: D-Leu), showed excel-lent selectivities over αvβ5 (IC50 ratio α5β1/αvβ5 between <0.009 and 0.039) and acceptable selectivities over αvβ3 (IC50 ratios α5β1/αvβ3 between 0.090 and 0.157). In vitro staining of adipose-derived stem cells with Cy5-labeled peptides using confocal microscopy revealed strong binding of the α5β1-selective bicycle CT3RGDcT3AWGCT3 to integrins in their natural environ-ment, illustrating the high potential of these RGD-bicycles as markers for α5β1-integrin expression.
- Open Access
- 26 March 2019
- Published by American Chemical Society (ACS) in Organic Letters
- Vol. 21 (7) , 2095-2100
Synthesis of Constrained Tetracyclic Peptides by Consecutive CEPS, CLIPS, and Oxime Ligation
In Nature, multicyclic peptides constitute a versatile molecule class with various biological functions. For their pharmaceutical exploitation, chemical methodologies that enable selective consecutive macrocyclizations are required. We disclose a combination of enzymatic macrocyclization, CLIPS alkylation, and oxime ligation to prepare tetracyclic peptides. Five new small molecular scaffolds and differently sized model peptides featuring noncanonical amino acids were synthesized. Enzymatic macrocyclization, followed by one-pot scaffold-assisted cyclizations, yielded 21 tetracyclic peptides in a facile and robust manner.
- 26 March 2019
- Published by American Chemical Society (ACS) in Organic Letters
- Vol. 21 (7) , 2095-2100
Open AccessSynthesis of Constrained Tetracyclic Peptides by Consecutive CEPS, CLIPS, and Oxime Ligation
In Nature, multicyclic peptides constitute a versatile molecule class with various biological functions. For their pharmaceutical exploitation, chemical methodologies that enable selective consecutive macrocyclizations are required. We disclose a combination of enzymatic macrocyclization, CLIPS alkylation, and oxime ligation to prepare tetracyclic peptides. Five new small molecular scaffolds and differently sized model peptides featuring noncanonical amino acids were synthesized. Enzymatic macrocyclization, followed by one-pot scaffold-assisted cyclizations, yielded 21 tetracyclic peptides in a facile and robust manner.
- Open Access
- 9 January 2019
- Published by American Chemical Society (ACS) in ACS Combinatorial Science
- Vol. 21 (3) , 198-206
Bicyclic RGD Peptides with Exquisite Selectivity for the Integrin αvβ3 Receptor Using a “Random Design” Approach
We describe the identification of bicyclic RGD-peptides with high affinity and selectivity for integrin αvβ3 via high-throughput screening of partly randomized libraries. Peptide libraries (~700 different compounds) comprising the universal integrin-binding sequence Arg-Gly-Asp (RGD) in the first loop and a randomized sequence XXX (X being one of 18 canoni-cal L-amino acids) in the second loop, both enclosed by either an L- or D-Cys residue, were converted to bicyclic peptides via reaction with 1,3,5-tris(bromomethyl)benzene (T3). Screening of 1st generation libraries yielded lead bicyclic inhibitors dis-playing submicromolar affinities for integrin αvβ3 (e.g. CT3HEQcT3RGDcT3, IC50: 195 nM). Next generation (2nd and 3rd) librar-ies were obtained by partially varying the structure of the strongest lead inhibitors and screening for improved affinities and selectivities. In this way, we identified the highly selective bicyclic αvβ3-binders CT3HPQcT3RGDcT3 (IC50=30 nM), CT3HPQCT3RGDcT3 (IC50=31 nM), and CT3HSQCT3RGDcT3 (IC50=42 nM) with affinities comparable to that of a knottin-RGD-type peptide (32 amino acids, IC50=38 nM) and outstanding selectivities over integrins αvβ5 (IC50 >10,000 nM) and α5β1 (IC50 >10,000 nM). Affinity measurements using Surface Plasmon-enhanced Fluorescence Spectroscopy (SPFS) yielded Kd values of 0.4 and 0.6 nM for Cy5-labeled bicycle CT3HPQcT3RGDcT3 and RGD ‘knottin’ peptide, respectively. In vitro stain-ing of HT29 cells with Cy5-labeled bicycles using confocal microscopy revealed strong binding to integrins in their natural environment, which highlights the high potential of these peptides as markers of integrin-expression.
- 9 January 2019
- Published by American Chemical Society (ACS) in ACS Combinatorial Science
- Vol. 21 (3) , 198-206
Open AccessBicyclic RGD Peptides with Exquisite Selectivity for the Integrin αvβ3 Receptor Using a “Random Design” Approach
We describe the identification of bicyclic RGD-peptides with high affinity and selectivity for integrin αvβ3 via high-throughput screening of partly randomized libraries. Peptide libraries (~700 different compounds) comprising the universal integrin-binding sequence Arg-Gly-Asp (RGD) in the first loop and a randomized sequence XXX (X being one of 18 canoni-cal L-amino acids) in the second loop, both enclosed by either an L- or D-Cys residue, were converted to bicyclic peptides via reaction with 1,3,5-tris(bromomethyl)benzene (T3). Screening of 1st generation libraries yielded lead bicyclic inhibitors dis-playing submicromolar affinities for integrin αvβ3 (e.g. CT3HEQcT3RGDcT3, IC50: 195 nM). Next generation (2nd and 3rd) librar-ies were obtained by partially varying the structure of the strongest lead inhibitors and screening for improved affinities and selectivities. In this way, we identified the highly selective bicyclic αvβ3-binders CT3HPQcT3RGDcT3 (IC50=30 nM), CT3HPQCT3RGDcT3 (IC50=31 nM), and CT3HSQCT3RGDcT3 (IC50=42 nM) with affinities comparable to that of a knottin-RGD-type peptide (32 amino acids, IC50=38 nM) and outstanding selectivities over integrins αvβ5 (IC50 >10,000 nM) and α5β1 (IC50 >10,000 nM). Affinity measurements using Surface Plasmon-enhanced Fluorescence Spectroscopy (SPFS) yielded Kd values of 0.4 and 0.6 nM for Cy5-labeled bicycle CT3HPQcT3RGDcT3 and RGD ‘knottin’ peptide, respectively. In vitro stain-ing of HT29 cells with Cy5-labeled bicycles using confocal microscopy revealed strong binding to integrins in their natural environment, which highlights the high potential of these peptides as markers of integrin-expression.
- Open Access
- 11 September 2018
- Published by Wiley in ChemBioChem
- Vol. 19 (18) , 1899
Cover Feature: A One‐Pot “Triple‐C” Multicyclization Methodology for the Synthesis of Highly Constrained Isomerically Pure Tetracyclic Peptides (ChemBioChem 18/2018)
- 11 September 2018
- Published by Wiley in ChemBioChem
- Vol. 19 (18) , 1899
Open AccessCover Feature: A One‐Pot “Triple‐C” Multicyclization Methodology for the Synthesis of Highly Constrained Isomerically Pure Tetracyclic Peptides (ChemBioChem 18/2018)
- 26 June 2018
- Published by Wiley in ChemBioChem
- Vol. 19 (18) , 1934-1938
A One‐Pot “Triple‐C” Multicyclization Methodology for the Synthesis of Highly Constrained Isomerically Pure Tetracyclic Peptides
A broadly applicable one‐pot methodology for the facile transformation of linear peptides into tetracyclic peptides through a chemoenzymatic peptide synthesis/chemical ligation of peptides onto scaffolds/copper(I)‐catalyzed reaction (CEPS/CLIPS/CuAAC; “triple‐C”) locking methodology is reported. Linear peptides with varying lengths (≥14 amino acids), comprising two cysteines and two azidohomoalanines (Aha), were efficiently cyclized head‐to‐tail by using the peptiligase variant omniligase‐1 (CEPS). Subsequent ligation–cyclization with tetravalent (T41/2) scaffolds containing two bromomethyl groups (CLIPS) and two alkyne functionalities (CuAAC) yielded isomerically pure tetracyclic peptides. Sixteen different functional tetracycles, derived from bicyclic inhibitors against urokinase plasminogen activator (uPA) and coagulation factor XIIa (FXIIa), were successfully synthesized and their bioactivities evaluated. Two of these (FF‐T41/2) exhibited increased inhibitory activity against FXIIa, compared with a bicyclic control peptide. The corresponding hetero‐bifunctional variants (UF/FU‐T41/2), with a single copy of each inhibitory sequence, exhibited micromolar activities against both uPA and FXIIa; thus illustrating the potential of the “bifunctional tetracyclic peptide” inhibitor concept.
- 26 June 2018
- Published by Wiley in ChemBioChem
- Vol. 19 (18) , 1934-1938
A One‐Pot “Triple‐C” Multicyclization Methodology for the Synthesis of Highly Constrained Isomerically Pure Tetracyclic Peptides
A broadly applicable one‐pot methodology for the facile transformation of linear peptides into tetracyclic peptides through a chemoenzymatic peptide synthesis/chemical ligation of peptides onto scaffolds/copper(I)‐catalyzed reaction (CEPS/CLIPS/CuAAC; “triple‐C”) locking methodology is reported. Linear peptides with varying lengths (≥14 amino acids), comprising two cysteines and two azidohomoalanines (Aha), were efficiently cyclized head‐to‐tail by using the peptiligase variant omniligase‐1 (CEPS). Subsequent ligation–cyclization with tetravalent (T41/2) scaffolds containing two bromomethyl groups (CLIPS) and two alkyne functionalities (CuAAC) yielded isomerically pure tetracyclic peptides. Sixteen different functional tetracycles, derived from bicyclic inhibitors against urokinase plasminogen activator (uPA) and coagulation factor XIIa (FXIIa), were successfully synthesized and their bioactivities evaluated. Two of these (FF‐T41/2) exhibited increased inhibitory activity against FXIIa, compared with a bicyclic control peptide. The corresponding hetero‐bifunctional variants (UF/FU‐T41/2), with a single copy of each inhibitory sequence, exhibited micromolar activities against both uPA and FXIIa; thus illustrating the potential of the “bifunctional tetracyclic peptide” inhibitor concept.