Fundagül Bilgiç Zortuk
Research Subjects
Fundagül Bilgiç Zortuk has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Eyüp Burak Küçük
Department of Orthodontics, Faculty of Dentistry, Hatay Mustafa Kemal University, Hatay, Türkiye.
2 shared publications - Hakkı Yılmaz
Department of Orthodontics, Faculty of Dentistry, Hatay Mustafa Kemal University, Antakya 31000, Türkiye
2 shared publications - Yazgı Ay Ünüvar
Adnan Menderes University
2 shared publications Abdullah Kaya
Oral & Dent Hlth Ctr, Hatay, Turkiye
1 shared publication- Abdullah Kaya
Department of Orthodontics, Mustafa Kemal University School of Dentistry, Hatay, Turkey
1 shared publication - Ali Tuncay Ozyilmaz
Mustafa Kemal University
1 shared publication
Latest Publications
- Open Access
- 23 July 2026
- Published by Springer Nature in BMC Oral Health
- Vol. 26 (1) , 1745
Root resorption in Class II malocclusion treatment with various methods
- 23 July 2026
- Published by Springer Nature in BMC Oral Health
- Vol. 26 (1) , 1745
Open AccessRoot resorption in Class II malocclusion treatment with various methods
- Open Access
- 1 July 2026
- Published by Springer Nature in BMC Oral Health
- Vol. 26 (1)
Evaluation of the frequency of dental anomalies in orthodontic patients with various malocclusions
The aim of this retrospective observational study was to evaluate the prevalence and distribution of dental anomalies in orthodontic patients with different malocclusions. Pretreatment diagnostic records of 766 orthodontic patients were retrospectively evaluated in a single-center setting. Dental anomalies were classified according to sex, orthodontic malocclusion type (Class I, n = 122; Class II, n = 568; Class III, n = 76), and jaw localization. Statistical analyses were performed using Fisher's exact test, Yates' correction, and Pearson's chi-square test. No statistically significant association was found between sex and the prevalence of dental anomalies (P = 0.739). At least one dental anomaly was detected in 71.8% of the patients. Root dilaceration was the most frequently observed anomaly (35%). The prevalence rates of numerical, dimensional, shape, eruption, and structural anomalies were 13.97%, 4.04%, 53.91%, 24.15%, and 30.67%, respectively. No significant difference in the prevalence of dental anomalies was observed among different malocclusion groups (P = 0.055). Dental anomalies were frequently observed in this orthodontic population. The prevalence and distribution of anomalies varied according to anomaly type and jaw localization, highlighting the importance of radiographic evaluation in orthodontic patients. These findings may support earlier detection of diagnostic challenges and more individualized treatment planning in routine orthodontic practice. Early identification of dental anomalies may facilitate comprehensive orthodontic treatment planning and help prevent potential functional and structural complications.
- 1 July 2026
- Published by Springer Nature in BMC Oral Health
- Vol. 26 (1)
Open AccessEvaluation of the frequency of dental anomalies in orthodontic patients with various malocclusions
The aim of this retrospective observational study was to evaluate the prevalence and distribution of dental anomalies in orthodontic patients with different malocclusions. Pretreatment diagnostic records of 766 orthodontic patients were retrospectively evaluated in a single-center setting. Dental anomalies were classified according to sex, orthodontic malocclusion type (Class I, n = 122; Class II, n = 568; Class III, n = 76), and jaw localization. Statistical analyses were performed using Fisher's exact test, Yates' correction, and Pearson's chi-square test. No statistically significant association was found between sex and the prevalence of dental anomalies (P = 0.739). At least one dental anomaly was detected in 71.8% of the patients. Root dilaceration was the most frequently observed anomaly (35%). The prevalence rates of numerical, dimensional, shape, eruption, and structural anomalies were 13.97%, 4.04%, 53.91%, 24.15%, and 30.67%, respectively. No significant difference in the prevalence of dental anomalies was observed among different malocclusion groups (P = 0.055). Dental anomalies were frequently observed in this orthodontic population. The prevalence and distribution of anomalies varied according to anomaly type and jaw localization, highlighting the importance of radiographic evaluation in orthodontic patients. These findings may support earlier detection of diagnostic challenges and more individualized treatment planning in routine orthodontic practice. Early identification of dental anomalies may facilitate comprehensive orthodontic treatment planning and help prevent potential functional and structural complications.
- Open Access
- 23 June 2025
- Published by Adnan Menderes University in Meandros Medical and Dental Journal
- Vol. 26 (2) , 206-210
A Comparative Analysis of Angular Cephalometric Measurements Using VistaDent and NemoCeph Digital Software
Objective: The aim of this investigation was to compare the reliability of two different software programs, Vista Dent and NemoCeph for digital cephalometric tracing when used for angular measurements on 2D digital cephalometric radiographs. Methods: A total of 300 cephalometric radiographs were chosen for this study. The Vista dent and Nemoceph computerized softwares programs were used to obtain cephalometric measurements from lateral cephalograms. The SNA and SNB angle values obtained by the two methods were evaluated through independent sample T-test and and the Mann-Whitney U Test was done to compare GoGn-SN angle between the two different computerized softwares programs. The Pearson correlation analysis was used to evaluate the consistency between the two measurement method. Results: SNA, SNB, and GoGn-SN angles performed by the Vista dent and Nemoceph software (p > 0.05). It was obtained strong correlations between all the variables. Conclusions: The measurements from the two computer-assisted cephalometric analysis are consistent. Clinicians can confidently use either of these programs.
- 23 June 2025
- Published by Adnan Menderes University in Meandros Medical and Dental Journal
- Vol. 26 (2) , 206-210
Open AccessA Comparative Analysis of Angular Cephalometric Measurements Using VistaDent and NemoCeph Digital Software
Objective: The aim of this investigation was to compare the reliability of two different software programs, Vista Dent and NemoCeph for digital cephalometric tracing when used for angular measurements on 2D digital cephalometric radiographs. Methods: A total of 300 cephalometric radiographs were chosen for this study. The Vista dent and Nemoceph computerized softwares programs were used to obtain cephalometric measurements from lateral cephalograms. The SNA and SNB angle values obtained by the two methods were evaluated through independent sample T-test and and the Mann-Whitney U Test was done to compare GoGn-SN angle between the two different computerized softwares programs. The Pearson correlation analysis was used to evaluate the consistency between the two measurement method. Results: SNA, SNB, and GoGn-SN angles performed by the Vista dent and Nemoceph software (p > 0.05). It was obtained strong correlations between all the variables. Conclusions: The measurements from the two computer-assisted cephalometric analysis are consistent. Clinicians can confidently use either of these programs.
- 10 December 2024
- Published by Elsevier in American Journal of Orthodontics and Dentofacial Orthopedics
- Vol. 167 (3) , 273-281
Comparison of 1-year follow-up results of Forsus, headgear, and extraction treatment in Class II malocclusion
- 10 December 2024
- Published by Elsevier in American Journal of Orthodontics and Dentofacial Orthopedics
- Vol. 167 (3) , 273-281
Comparison of 1-year follow-up results of Forsus, headgear, and extraction treatment in Class II malocclusion
- Open Access
- 25 April 2024
- Published by Springer Nature in Clinical Oral Investigations
- Vol. 28 (5) , 1-10
Effects of different primers and colouring solutions on orthodontic bonding: shear bond strength and colour change
Objectives: This in vitro study evaluated the effect of different colouring solutions and primer systems used in the bonding of brackets on enamel colour change and bond strength. Materials and methods: 120 premolar teeth were divided into four main groups; brackets were bonded with 37% orthophosphoric acid + Transbond XT Primer in Group 1, 3 M Single Bond Universal in Group 2, Transbond Plus SEP in Group 3, and G-Premio Bond in Group 4. Each group was divided into three subgroups, and the teeth were placed in a cup containing coffee and tea mixture, in a cup containing cola and in distilled water. A bond strength test was applied to all teeth. Colour measurements of all teeth were performed at 2 different times: before bonding and after the bond strength test. Results: The average bond strength of the 37% orthophosphoric acid group was higher than that of the other groups. The effect of primer and solution groups on colour change was statistically significant (p = 0.001 and p = 0.023, respectively). Conclusions: In this study, the bond strength was clinically sufficient in all primer groups. The highest colour change was observed when the tea–coffee solution and Transbond Plus SEP primer were used. Clinical relevance: This study has identified enamel discoloration and bond strength from different colouring solutions and primer systems used for bonding braces, which can be used to inform clinicians and patients to achieve better treatment results.
- 25 April 2024
- Published by Springer Nature in Clinical Oral Investigations
- Vol. 28 (5) , 1-10
Open AccessEffects of different primers and colouring solutions on orthodontic bonding: shear bond strength and colour change
Objectives: This in vitro study evaluated the effect of different colouring solutions and primer systems used in the bonding of brackets on enamel colour change and bond strength. Materials and methods: 120 premolar teeth were divided into four main groups; brackets were bonded with 37% orthophosphoric acid + Transbond XT Primer in Group 1, 3 M Single Bond Universal in Group 2, Transbond Plus SEP in Group 3, and G-Premio Bond in Group 4. Each group was divided into three subgroups, and the teeth were placed in a cup containing coffee and tea mixture, in a cup containing cola and in distilled water. A bond strength test was applied to all teeth. Colour measurements of all teeth were performed at 2 different times: before bonding and after the bond strength test. Results: The average bond strength of the 37% orthophosphoric acid group was higher than that of the other groups. The effect of primer and solution groups on colour change was statistically significant (p = 0.001 and p = 0.023, respectively). Conclusions: In this study, the bond strength was clinically sufficient in all primer groups. The highest colour change was observed when the tea–coffee solution and Transbond Plus SEP primer were used. Clinical relevance: This study has identified enamel discoloration and bond strength from different colouring solutions and primer systems used for bonding braces, which can be used to inform clinicians and patients to achieve better treatment results.
- Open Access
- 30 December 2023
- Published by Hatay Mustafa Kemal University Faculty of Medicine in Interdisciplinary Medical Journal
- Vol. 14 (50) , 190-196
Assessment of relationship between different communication methods and treatment compliance in orthodontic patients during Covid-19 pandemics
Objective: The aim of this study was to minimize impairment in oral hygiene and failure of brackets; therefore, effects of pandemic on treatment duration, by communicating our patients using 4 different methods during Covid-19 pandemic. Methods: In the study, 227 patients undergoing fixed orthodontic treatment were included. Five groups were designed: WhatsApp group, short message service (SMS) group, Teledentistry group, e-mail group and control group. During quarantine period, patients were contacted for 4 times and same text was sent to patients. After pandemics, the patients were assessed using mucogingival index (MGI), orthodontic plaque index (OPI) and failure of brackets was determined. Results: In MGI, percentage of patients with healthy result were as follows: WhatsApp group, 83.7%; SMS group, 87.8%; Teledentistry group, 83.7%; E-mail group, 77.5%; control group, 72.2% and no significant difference was found (p>0.05). The OPI scores were as follows: 1.12±1.24 in WhatsApp group; 1.27±1.28 in SMS group; 1.24±1.38 in Teledentistry group; 1.00±1.22 in E-mail group; and 1.61±1.25 in the control group and no significant difference was found (p>0.05). The mean number of brackets broken was 0.47±0.88 in WhatsApp group, 0.39±0.83 in SMS group, 0.51±1.00 in Teledentistry group, 0.40±0.67 in E-mail group and 0.44±0.86 in the control group and no significant difference was found (p>0.05). Conclusion: It was determined that communicating with patients in different ways did not make any difference in terms of the subjects investigated in the study. It was concluded that it would be more appropriate to conduct new studies including social and psychological evaluations.
- 30 December 2023
- Published by Hatay Mustafa Kemal University Faculty of Medicine in Interdisciplinary Medical Journal
- Vol. 14 (50) , 190-196
Open AccessAssessment of relationship between different communication methods and treatment compliance in orthodontic patients during Covid-19 pandemics
Objective: The aim of this study was to minimize impairment in oral hygiene and failure of brackets; therefore, effects of pandemic on treatment duration, by communicating our patients using 4 different methods during Covid-19 pandemic. Methods: In the study, 227 patients undergoing fixed orthodontic treatment were included. Five groups were designed: WhatsApp group, short message service (SMS) group, Teledentistry group, e-mail group and control group. During quarantine period, patients were contacted for 4 times and same text was sent to patients. After pandemics, the patients were assessed using mucogingival index (MGI), orthodontic plaque index (OPI) and failure of brackets was determined. Results: In MGI, percentage of patients with healthy result were as follows: WhatsApp group, 83.7%; SMS group, 87.8%; Teledentistry group, 83.7%; E-mail group, 77.5%; control group, 72.2% and no significant difference was found (p>0.05). The OPI scores were as follows: 1.12±1.24 in WhatsApp group; 1.27±1.28 in SMS group; 1.24±1.38 in Teledentistry group; 1.00±1.22 in E-mail group; and 1.61±1.25 in the control group and no significant difference was found (p>0.05). The mean number of brackets broken was 0.47±0.88 in WhatsApp group, 0.39±0.83 in SMS group, 0.51±1.00 in Teledentistry group, 0.40±0.67 in E-mail group and 0.44±0.86 in the control group and no significant difference was found (p>0.05). Conclusion: It was determined that communicating with patients in different ways did not make any difference in terms of the subjects investigated in the study. It was concluded that it would be more appropriate to conduct new studies including social and psychological evaluations.
- Open Access
- 1 December 2023
- Published by Galenos Yayinevi in Turkish Journal of Orthodontics
- Vol. 36 (4) , 248-253
Comparison of Enamel Discoloration using Flash-Free and Conventional Adhesive Brackets with Different Finishing Protocols
Objective: The aim of this study was to compare the effects of flash-free and conventional adhesive brackets and different finishing techniques on enamel discoloration. Methods: Forty human premolar teeth were utilized and randomly divided into four groups based on the type of brackets and finishing technique: (1) Gemini((R)) brackets were used for orthodontic bonding. After debanding, adhesive remnants were cleaned using a 12-blade tungsten carbide bur. (2) Gemini((R)) suspenders were used for orthodontic bonding. After debanding the brackets, adhesive remnants were cleaned using12-blade APC(TM) Flash-Free brackets were used for orthodontic bonding. After debanding, adhesive remnants were cleaned a 12-blade tungsten carbide bur and polished with Sof-Lex disks. (4) APC(TM) Flash-Free brackets were used for orthodontic bonding. After debanding, the adhesive remnants were cleaned using a 12-blade tungsten carbide bur. A Vita Easyshade spectrophotometer was used to measure the color change values of the 40 teeth. Results: The color change of the enamel surface in the Flash Free bracket group was significantly less than that in the conventional groups (p=0.003 p < 0.05). The mean.E values obtained from the Sof-Lex groups were lower than those obtained from the groups without Sof-Lex, but these results were not statistically significant (p=0.280 p > 0.05). Conclusion: It is recommended to use Flash-Free brackets and polish with Sof-Lex disk following the clean-up procedures to minimize the possibility of discoloration of the teeth during orthodontic treatment.
- 1 December 2023
- Published by Galenos Yayinevi in Turkish Journal of Orthodontics
- Vol. 36 (4) , 248-253
Open AccessComparison of Enamel Discoloration using Flash-Free and Conventional Adhesive Brackets with Different Finishing Protocols
Objective: The aim of this study was to compare the effects of flash-free and conventional adhesive brackets and different finishing techniques on enamel discoloration. Methods: Forty human premolar teeth were utilized and randomly divided into four groups based on the type of brackets and finishing technique: (1) Gemini((R)) brackets were used for orthodontic bonding. After debanding, adhesive remnants were cleaned using a 12-blade tungsten carbide bur. (2) Gemini((R)) suspenders were used for orthodontic bonding. After debanding the brackets, adhesive remnants were cleaned using12-blade APC(TM) Flash-Free brackets were used for orthodontic bonding. After debanding, adhesive remnants were cleaned a 12-blade tungsten carbide bur and polished with Sof-Lex disks. (4) APC(TM) Flash-Free brackets were used for orthodontic bonding. After debanding, the adhesive remnants were cleaned using a 12-blade tungsten carbide bur. A Vita Easyshade spectrophotometer was used to measure the color change values of the 40 teeth. Results: The color change of the enamel surface in the Flash Free bracket group was significantly less than that in the conventional groups (p=0.003 p < 0.05). The mean.E values obtained from the Sof-Lex groups were lower than those obtained from the groups without Sof-Lex, but these results were not statistically significant (p=0.280 p > 0.05). Conclusion: It is recommended to use Flash-Free brackets and polish with Sof-Lex disk following the clean-up procedures to minimize the possibility of discoloration of the teeth during orthodontic treatment.
- Open Access
- 30 September 2021
- Published by Zeus Publishing in International Dental Research
- Vol. 11 (Suppl. 1) , 167-175
Evaluation of the surface properties of modified Ni-Ti arch wires
Aim: Materials used in orthodontic treatment can cause corrosion and metal ion release to the mouth. This study was aimed to examine the changes in the friction coefficients and corrosion resistance of the modified Ni-Ti arch wires. Methodology: Our sample consisted of 16 Ni-Ti arch wires (0.016 × 0.022 inches). Coating bathes involving Ni-Ti, Ni-Ti-Mo, and Ni-Ti-Cr were prepared for arch wires coating. New surfaces were analyzed by SEM, and the crystallographic structure was determined by X-rays. The friction coefficient of the coated wires was determined by nanoindentation. Artificial saliva was prepared as a corrosive condition. Impedance measurements were performed with an electrochemical analyzer. The AC impedance spectroscopy measurements were performed after four hours, seven, 15, 30, 45, and 60 days. Results: All groups were more resistant than the control group (-447 mV) [group 1 (-388 mV), group 2 (-328 mV), group 3 (-327 mV), group 4 (-427 mV), group 5 (-395 mV), group 6 (-366 mV), and group 7 (-380 mV)]. Friction coefficients of group 5 (0.252) and group 6 (0.265) were observed to be lower than those of the control group (0.288). Conclusion: In the results of our study, it was shown that the surface properties of Ni-Ti wires could be electrochemically improved. The coated wires (group 5 and group 6) had a remarkable corrosion resistance and reduced friction. The protocols that we used should help provide better-quality surfaces. How to cite this article: Özyılmaz AT, Bilgiç Zortuk F, Yılmaz H. Evaluation of the surface properties of modified ni-ti arch wires. Int Dent Res 2021;11(Suppl.1):167-176. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.25 Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.
- 30 September 2021
- Published by Zeus Publishing in International Dental Research
- Vol. 11 (Suppl. 1) , 167-175
Open AccessEvaluation of the surface properties of modified Ni-Ti arch wires
Aim: Materials used in orthodontic treatment can cause corrosion and metal ion release to the mouth. This study was aimed to examine the changes in the friction coefficients and corrosion resistance of the modified Ni-Ti arch wires. Methodology: Our sample consisted of 16 Ni-Ti arch wires (0.016 × 0.022 inches). Coating bathes involving Ni-Ti, Ni-Ti-Mo, and Ni-Ti-Cr were prepared for arch wires coating. New surfaces were analyzed by SEM, and the crystallographic structure was determined by X-rays. The friction coefficient of the coated wires was determined by nanoindentation. Artificial saliva was prepared as a corrosive condition. Impedance measurements were performed with an electrochemical analyzer. The AC impedance spectroscopy measurements were performed after four hours, seven, 15, 30, 45, and 60 days. Results: All groups were more resistant than the control group (-447 mV) [group 1 (-388 mV), group 2 (-328 mV), group 3 (-327 mV), group 4 (-427 mV), group 5 (-395 mV), group 6 (-366 mV), and group 7 (-380 mV)]. Friction coefficients of group 5 (0.252) and group 6 (0.265) were observed to be lower than those of the control group (0.288). Conclusion: In the results of our study, it was shown that the surface properties of Ni-Ti wires could be electrochemically improved. The coated wires (group 5 and group 6) had a remarkable corrosion resistance and reduced friction. The protocols that we used should help provide better-quality surfaces. How to cite this article: Özyılmaz AT, Bilgiç Zortuk F, Yılmaz H. Evaluation of the surface properties of modified ni-ti arch wires. Int Dent Res 2021;11(Suppl.1):167-176. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.25 Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.
- 27 December 2020
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 7 (3) , 466-470
Ortodontistler arasında dijital model kullanımının değerlendirilmesi
Amaç: Bu anket çalışmasının amacı ülkemizde özel klinik, üniversite ya da devlet kurumunda çalışan ortodonti doktoru/uzmanı ve uzmanlık/doktora öğrencilerinin dijital ortodontik model kullanım yaygınlığını, bilgilerini ve tecrübelerini değerlendirmektir. Gereç ve Yöntemler: Türkiye'de çalışan 740 ortodonti uzmanı, doktora ve uzmanlık öğrencisine 20 sorudan oluşan bir anket gönderilmiştir. Mail yoluyla ve kongre, sempozyum ve toplantılarda 388 kişiye anket uygulanmıştır. Anket, demografik özellikler ve klinik özellikleri, dijital modele yönelik tutumları ve dijital model ile ilgili bölümlerden oluşmaktadır. Bulgular: 388 anketten elde edilen veriler analiz edilmiştir. Yanıt verenlerin yaş ortalaması 30 yıldır (dağılım: 23-55 yıl). Tüm prosedürler için 204 ortodontist (% 52.6) dijital modeli tercih etmiş, % 19.6'sı seminerlerden dijital model hakkında bilgi sahibi olduklarını bildirmiştir. Dijital modellerin kullanımında en sık belirtilen nedenler model kaybının ve model hasarının olmaması (% 44.8), ardından dijital görüntü üzerinde ölçüm yapabilmesidir (% 31.4). 300 ortodontist (% 77.3) dijital model hakkında daha fazla bilgi edinme isteğindedir. Sonuç: Verilerimiz dijital modelin ortodontistler tarafından yaygın olarak kullanıldığını göstermektedir; ortodontik tanı için dijital model tercihi, daha büyük teknik yetkinlik ile orantılı olarak artacaktır.
- 27 December 2020
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 7 (3) , 466-470
Ortodontistler arasında dijital model kullanımının değerlendirilmesi
Amaç: Bu anket çalışmasının amacı ülkemizde özel klinik, üniversite ya da devlet kurumunda çalışan ortodonti doktoru/uzmanı ve uzmanlık/doktora öğrencilerinin dijital ortodontik model kullanım yaygınlığını, bilgilerini ve tecrübelerini değerlendirmektir. Gereç ve Yöntemler: Türkiye'de çalışan 740 ortodonti uzmanı, doktora ve uzmanlık öğrencisine 20 sorudan oluşan bir anket gönderilmiştir. Mail yoluyla ve kongre, sempozyum ve toplantılarda 388 kişiye anket uygulanmıştır. Anket, demografik özellikler ve klinik özellikleri, dijital modele yönelik tutumları ve dijital model ile ilgili bölümlerden oluşmaktadır. Bulgular: 388 anketten elde edilen veriler analiz edilmiştir. Yanıt verenlerin yaş ortalaması 30 yıldır (dağılım: 23-55 yıl). Tüm prosedürler için 204 ortodontist (% 52.6) dijital modeli tercih etmiş, % 19.6'sı seminerlerden dijital model hakkında bilgi sahibi olduklarını bildirmiştir. Dijital modellerin kullanımında en sık belirtilen nedenler model kaybının ve model hasarının olmaması (% 44.8), ardından dijital görüntü üzerinde ölçüm yapabilmesidir (% 31.4). 300 ortodontist (% 77.3) dijital model hakkında daha fazla bilgi edinme isteğindedir. Sonuç: Verilerimiz dijital modelin ortodontistler tarafından yaygın olarak kullanıldığını göstermektedir; ortodontik tanı için dijital model tercihi, daha büyük teknik yetkinlik ile orantılı olarak artacaktır.
- 29 August 2018
- Published by Galenos Yayinevi in Turkish Journal of Orthodontics
- Vol. 31 (3) , 73-78
Analysis of Six Orthodontic Journals in Science Citation Index and Science Citation Index Expanded: A Bibliometric Analysis
Turkish Journal of Orthodontics, turkjorthod
- 29 August 2018
- Published by Galenos Yayinevi in Turkish Journal of Orthodontics
- Vol. 31 (3) , 73-78
Analysis of Six Orthodontic Journals in Science Citation Index and Science Citation Index Expanded: A Bibliometric Analysis
Turkish Journal of Orthodontics, turkjorthod