SMSupriyo Mitra

Supriyo Mitra

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Supriyo Mitra has a total of 70 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Crustal Structure of the Jammu-Kashmir-Kishtwar Himalaya

    by Swati Sharma, Supriyo Mitra, Keith Priestley, Sunil Kumar Wanchoo

    Summary: The Jammu-Kashmir-Kishtwar Himalaya, at the western end of the Himalayan arc, lies within a major seismic gap between the 1905 Kangra and 2005 Kashmir earthquakes; the last great earthquake in the region occurred in 1555. The region is geologically distinctive, encompassing the intermontane Kashmir Valley and the Kishtwar Window, yet its subsurface structure remains poorly constrained. We investigate its crustal structure and implications for seismotectonics using data from 12 broadband seismographs deployed across the Sub-, Lesser and Higher Himalaya to the Kishtwar Window. Our analysis combines P-wave receiver-function common-conversion-point (CCP) stacking, crustal-thickness (H-$\rm V_{p}/V_{s}$) stacking, and joint inversion of receiver functions and Rayleigh-wave group-velocity dispersion. The CCP images show that Indian continental crust underthrusting the Jammu-Kishtwar Himalaya. The top of the underthrust Indian crust deepens from ~47 km beneath the Siwalik Sub-Himalaya to ~54 km beneath the Kishtwar Window, dipping northeastward by ~2-3o with undulations and possible imbrication beneath the Lesser Himalaya. In several cases, these variations exceed the formal ±3 km uncertainty, suggesting genuine lateral heterogeneity in the crust. A negative impedance contrast marks the top of the underthrust Indian crust and is interpreted as the Main Himalayan Thrust (MHT). The MHT dips gently (~2-3o beneath the Sub-Himalaya but steepens to ~13-17o beneath the Higher Himalaya, indicating a mid-crustal ramp. Additional steeply dipping negative impedance contrasts up-dip of the MHT may represent thrust splays. The H-$\rm V_{p}/V_{s}$stacks indicate predominantly felsic crust, with an average $\rm V_{p}/V_{s}$of 1.74 ± 0.03. Jointly inverted shear-wave velocity ($\rm V_s$) models reveal four principal features: (1) a shallow sedimentary layer with $\rm V_s$1 km in the hinterland; (2) a low-velocity layer interpreted as the MHT, deepening from 8-10 km beneath the Sub-Himalaya to ~18-20 km beneath the Kishtwar Window; (3) increasing $\rm V_s$with depth in the underthrust Indian crust, which maintains an approximately uniform thickness of ~40 km; and (4) a Moho expressed as a velocity-gradient boundary, with $\rm V_s$>4.3 $\rm km \; s^{-1}$) below it. Nearby, well-located small-to-moderate earthquakes projected on this profile highlights the transition from frictional locking to creep along the MHT and identifies the active Lesser Himalayan Duplex beneath the Kishtwar Window. The earthquake depth distribution further indicates that the underthrust Indian crust remains seismogenic beneath the Jammu-Kishtwar Himalaya.

  • Open Access

    3D Absorption and 2D Scattering Attenuation of the Kashmir “Seismic Gap” in NW Himalaya

    by Dibyajyoti Chaudhuri, Amarjeet Kumar, Supriyo Mitra, Sunil Kumar Wanchoo, Keith Priestley

    The Kashmir “seismic gap” in NW Himalaya has accumulated sufficient elastic strain to cause a great earthquake. Constraining the lateral and depth‐dependent variations in seismic attenuation across this region is essential for ground‐shaking estimation from earthquakes. Recently acquired waveform data from precisely‐located‐local earthquakes are used to compute: (a) 3D S‐wave attenuation using coda‐normalization; (b) 3D intrinsic absorption using coda quality‐factor; and (c) 2D scattering from peak delay‐time measurements. Our results, interpreted in light of the structure and seismicity, reveal frequency‐dependent variations in attenuation, controlled by the crustal structure, lithology, geometry of major thrusts and active faults. High attenuation/absorption characterize the sedimentary/meta‐sedimentary rocks of the Sub‐Himalaya and the Lesser Himalayan Duplex in the Kishtwar Window (KW). Enhanced attenuation and scattering within the KW and its surroundings are attributed to concentrated seismicity associated with the frontal ramp of the Main Himalayan Thrust (MHT). In contrast, the reentrants of the Main Frontal Thrust and Reasi Thrust, representing surface expressions of MHT lateral‐ramp, exhibit relatively low attenuation/absorption. This is possibly due to shallowing of the underthrust Indian crust across the lateral ramp. The Higher Himalayan crystallines show low attenuation and weak scattering. The Kashmir Valley shows lateral contrasts in attenuation/absorption, indicating varying sedimentary thicknesses. The MHT demarcates the contrast between the high absorption/attenuation Himalayan Wedge above and the low absorption/attenuation underthrusting Indian crust below. The Indian upper‐crust shows high attenuation in patches, possibly related to fluids from metamorphic dehydration reactions or inherited heterogeneity.

  • Open Access

    Autocorrelation‐Based Imaging of Crustal Discontinuities Including the Main Himalayan Thrust and Vp/Vs Ratio in the Jammu and Kashmir Himalaya

    by Hari Ram Thapa, Supriyo Mitra, Abdelkrim Aoudia, Gordana Vlahovic, Keith Priestley, Sunil Kumar Wanchoo

    The Jammu and Kashmir Himalaya, located between the rupture zones of the 1905 Kangra and 2005 Kashmir earthquakes, represent a prominent “seismic gap” where understanding the subsurface structure is critical for seismic hazard assessment. This study presents new insights into the crustal structure of this region using teleseismic P‐wave coda autocorrelation, applied for the first time in this region. We observe sediment thicknesses reaching ∼7 km in the foreland basin, thinning progressively to the north. Moho depths reveal a flat structure in the south, localized shallowing between the MBT and MCT, and deepening north of the MCT, consistent with crustal thickening from continental collision and underthrusting. Zones of Moho thinning correlate with elevated Vp/Vs ratios (up to 1.85), suggesting higher temperatures or partial melts. These findings align with regional topography and are consistent with isostatic compensation. The MHT exhibits lateral ramps beneath the Riasi Thrust (RT) and Mandli‐Kishanpur Thrust (MKT), which may act as rupture‐segment boundaries. We image a ramp–flat–ramp geometry of the MHT, improving earlier models of a single frontal ramp deepening toward the MCT. The first ramp lies within the locked MHT segment, introducing internal segmentation in the seismogenic‐zone. This geometry may concentrate strain, enhance stress buildup, and limit rupture propagation, supporting the 1555 earthquake as a deep blind thrust. It also promotes slip deficit accumulation, explaining persistence of the seismic gap despite ∼11 mm/yr arc‐normal convergence. This revised MHT geometry implies potential for future large blind earthquakes and calls for reassessing regional seismic hazard models.

  • The 28 March 2025 Mw 7.7 Myanmar earthquake: spatio-temporal rupture evolution and source characteristics

    by Ajay Kumar, Dibyajyoti Chaudhuri, Rupak Banerjee, Sankarshan Mondal, Sk. Shamim, Tarak Yadav, Supriyo Mitra

  • Open Access

    Autocorrelation-Based Imaging of Crustal Discontinuities including the Main Himalayan Thrust and Vp/Vs ratio in the Jammu and Kashmir Himalaya

    by Hari Ram Thapa, Supriyo Mitra, Abdelkrim Aoudia, Gordana Vlahovic, Keith F. Priestley, Sunil Kumar Wanchoo

    The Jammu and Kashmir Himalaya, located between the rupture zones of the 1905 Kangra and 2005 Kashmir earthquakes, represent a prominent ‘seismic gap’ where understanding the subsurface structure is critical for seismic hazard assessment. This study presents new insights into the crustal structure of this region using teleseismic P-wave coda autocorrelation, applied for the first time in this region. We observe sediment thicknesses reaching ~7 km in the foreland basin, thinning progressively to the north. Moho depths reveal a flat structure in the south, localized shallowing between the MBT and MCT, and deepening north of the MCT, consistent with crustal thickening from continental collision and underplating. Zones of Moho thinning correlate with elevated Vp/Vs ratios (up to 1.85), suggesting higher temperatures or partial melts. These findings align with regional topography and are consistent with isostatic compensation. The MHT exhibits lateral ramps beneath the Riasi Thrust (RT) and Mandli-Kishanpur Thrust (MKT), which may act as rupture-segment boundaries. We image a ramp–flat–ramp geometry of the MHT, improving earlier models of a single frontal ramp deepening toward the MCT. The first ramp lies within the locked MHT segment, introducing internal segmentation in the seismogenic-zone. This geometry may concentrate strain, enhance stress buildup, and limit rupture propagation, supporting the 1555 earthquake as a deep blind thrust. It also promotes slip deficit accumulation, explaining persistence of the seismic gap despite ~11 mm/yr convergence. This revised MHT geometry implies potential for future large blind earthquakes and calls for reassessing regional seismic hazard models.


  • Open Access

    3D Scattering and Absorption Imaging of the Jammu and Kashmir Himalaya

    by Dibyajyoti Chaudhuri, Amarjeet Kumar, Supriyo Mitra, Sunil Wanchoo, Keith Priestley

    The NW Himalayan "seismic gap" spanning the meisoseismal zone of the 1555-Kashmir earthquake, is located between the rupture zones of the 1905 and 2005 earthquakes. Knowledge of the lateral variation in seismic attenuation across this orogenic belt is crucial to estimate ground shaking from future earthquakes. To this end, we use recordings from the Jammu and Kashmir Seismological NETwork to compute the 3D S-wave attenuation (through coda-normalization) and, jointly separate and map the frequency dependent seismic absorption (from coda quality factors) and scattering (from peak delay times) contributions. Our findings reveal strong variations in these parameters throughout the region which are controlled by the differences in crustal structure and rheology. Maps at shallow depths show patches of both high and low attenuation throughout the Sub-Himalaya and the Lesser Himalaya relating to differences in sediment thicknesses or rheology. The regions adjoining the reentrants of MFT south of the Reasi Thrust, and those of the MBT and MCT, SW and SE of the Kishtwar Window display high absorption characteristics, conspicuous across all frequencies and this pattern does alter significantly as depth increases (~20 km). The Kishtwar window, hosting crystalline rocks, is marked by lower attenuation overall but higher attenuation in patches to the south and north, as we go deeper. Surprisingly, high absorption of energy is visible throughout the window across all frequencies. SW of the window, near the MCT reentrant, a broad patch of high absorption coincides with the lateral ramp of the MHT and continues all through in the SE direction. The Kashmir Valley, where sedimentary rocks overlie the crystalline basement shows lateral variations of low and high Q and Qc (absorption), with the Pir Panjal Ranges to its south showing high S-wave attenuation, low absorption and high scattering. At greater depths however this entire zone is marked by high attenuation, high absorption but low scattering which may be a signature of the structure of the top of the underthrusting Indian Plate and/or the frontal-lateral ramps on the MHT.

  • Open Access

    Super-adiabatic asthenosphere in southeast Asia - its tectonic and magmatic implications

    by Rupak Banerjee, Chujie Liu, Stephen P. Grand, Eric Sandvol, Supriyo Mitra, Xiaofeng Liang, Shengji Wei

    Southeast Asia is surrounded by active subduction zones and has a complex tectonic history. It hosts the Indo China block in the west and the South China Sea in the east. Cenozoic intraplate volcanic activity widely spans the Indo China block and the South China sea. These volcanics are not related to any arc volcanism or the opening of the South China Sea during the Miocene. Here, we present an interpretation of a new high resolution seismic tomography model FWEA23, in southeast Asia. We observe extensive slow shear velocity (Vs) anomalies in FWEA23 across most of southeast Asia, extending from the surface down to ~660 km, resembling one or more plumes. We observe the evidence for a strong upwelling beneath Hainan island and the Leizhou peninsula and a weaker one beneath eastern Vietnam, Thailand and Laos. These upwellings spread laterally in all directions beneath southeast Asia at shallow depths (less than ~220 km). We address the tectonic implications of the plume head at shallow depths as well as the deeper origins of the Hainan plume. At depths < 220 km, the slow anomaly extends westward to the Sagaing fault, eastward to the active subduction zones, and northward to ~26°N latitude. We also observe that the asthenospheric mantle (100 - 220 km) beneath southeast Asia is slower than the global average shear velocity of oceanic asthenosphere, implying that the mantle beneath Southeast Asia is warmer than the global adiabat. Additionally, our model indicates a shallow Lithosphere-Asthenosphere boundary (LAB) in the region. We infer that the lateral spreading of the plume at shallow depths is thermally eroding the base of the lithospheric mantle. Also, this lateral spreading could explain the consistency in timing and geochemical features between the Cenozoic intraplate volcanism and the Hainan volcano. We also observe flat, isolated high Vs anomalies in the mantle transition zone, that we interpret as the remnants of subducted slabs. We observe low Vs anomalies in the gaps between the high Vs anomalies. We suggest that these stagnant slabs create a thermal boundary layer on top of the lower mantle by trapping the heat beneath. The built-up heat increases the temperature of the ambient mantle and triggers thermal upwellings that ascend through the slab-gaps.

  • Open Access

    Himachal Pradesh Seismological NETwork (HiPSNET): Structure of the Crust and the geometry of the Main Himalayan Thrust

    by Sk Shamim, Swati Sharma, Dibyajyoti Chaudhuri, Supriyo Mitra, Keith Priestley, Sunil Kumar Wanchoo

    The Himachal Pradesh Seismological NETwork (HiPSNET) was installed in 2019 across the northwestern Himachal Himalaya, comprising seven broadband seismograph systems. Teleseismic data with magnitude greater than 5.5 and in the distance range of 30-90° have been used to compute P-wave receiver functions (P-RFs). These P-RFs have been depth migrated to form a 2D common conversion point (CCP) stack profile across the strike of the Himalaya. The main features on the CCP profile are the positive impedance boundaries of the Moho and the mid-crust, and the negative impedance contrast boundary of the Main Himalayan Thrust (MHT). The Indian crust underthrust the Himachal Himalaya with a gentle dip of ~5-7° in the NE direction. The Moho depth increases from the foreland (SW) to the hinterland (NE). Beneath the Sub-Himalaya, the Moho is at a depth of ~45 km, and gradually deepens to ~60 km beneath the Lesser-Himalaya, and further to ~70 km beneath the Higher-to-Tethyan Himalaya. The MHT, associated with a low-velocity layer, has a flat-ramp geometry, and ranges in depth from ~10 km beneath the Sub-Himalaya to ~20 km beneath the Higher-Tethyan Himalaya. Precisely located small-to-moderate earthquakes, from previous studies, concentrate on or above the MHT frontal ramp structure. This possibly marks the locked-to-creep transition on the MHT, lying below the Higher-Himalaya.

  • Open Access

    Love-wave group-velocity tomography of India–Tibet: insights into radially anisotropic S-wave velocity structure

    by Monumoy Ghosh, Siddharth Dey, Supriyo Mitra

    SUMMARY: Love (LQ) and Rayleigh-wave (LR) dispersion data provide essential constraints on radially anisotropic shear-wave velocity structure. Vertically polarized S-wave velocity ($\rm \mathit{ S}_V$) structure of India–Tibet are available from modelling of LR dispersion data, but reliable LQ dispersion measurements are limited. This is due to poor signal-to-noise (SNR) ratio on horizontal component waveforms, off great-circle-arc propagation and overtone interference. We overcome these limitations by performing systematic SNR tests, polarization analysis and minimization of overtone interference, to compute fundamental-mode LQ group-velocity dispersion and tomography across India, Himalaya and Tibet, for period range of 10–120 s. Fundamental-mode group-velocity dispersion, in this period range, is sensitive to the crust and upper-mantle structure. Lateral resolution of the group-velocity maps vary from 4$\rm ^{\circ }$ (10–40 s) to 9$\rm ^{\circ }$(90–120 s). Group-velocities (absolute and anomaly) and its lateral variations match the regional-scale geologic and tectonic features. Up to 20 s period low-velocity sedimentary layers are observed in the Bengal and Indus delta-fan complexes, Himalaya and Suleiman Mountain foreland basins, Qaidam, Tarim and Eastern Tadjik Basins. The Indian Cratons have higher group-velocities compared to the thickened Tibetan Plateau crust across the entire range of periods. At lower periods the western Tibetan Plateau is underlain by high-velocity anomaly and the central-eastern Plateau has a broad zone of low-velocity anomaly. To test the null hypothesis of isotropy, we use isotropic $\rm \mathit{ S}_V$ models to predict the observed LQ dispersion data. Our test negates the null hypothesis and suggest radially anisotropic structure. Finally, we invert the LQ dispersion data to obtain horizontally polarized shear-wave ($\rm \mathit{ S}_H$) velocity structure beneath India–Tibet. $\rm \mathit{ S}_H$ velocity models have an uncertainty of $\sim$5 per cent. These models reveal high average $\rm \mathit{ S}_H$ velocity (3.7–3.9 $\rm km \,\, s^{-1}$) in the Indian Cratonic crust, which extends beyond its geological outcrops, beneath the Deccan and Marwar Plateau, Southern Indian Granulite Terrane, and the Himalayan foreland basin (HFB). This is underlain by a high $\rm \mathit{ S}_H$ velocity mantle-lid with variable thickness beneath cratons. The thickest mantle lids are beneath the Dharwar ($\sim$150 km) and Bastar ($\sim$180 km) Cratons. The high velocity Indian Cratonic crust and upper-mantle underthrust the Tibetan Plateau entirely in the west, up-to the Altyn–Tagh Fault; and half-way in the centre-east, up-to the Bangong-Nujiang Suture. This has lead to crustal-doubling beneath Tibet and a large-scale mid-crustal low velocity layer, bound by active faults along its edges. We use the $\rm \mathit{ S}_H$ velocity of $\le$3.0 $\rm km \,\, s^{-1}$ to delineate the regional-scale sedimentary basins. These include the Bengal and Indus delta-fan complexes with sedimentary layer thickness $>$15 km; the intra-cratonic HFB, Eastern Tadjik and Qaidam Basins with up-to 10 km sedimentary layer thickness. The Tarim basin has strong E–W variation in sedimentary thickness with the deepest depocentre beneath the eastern basin ($>$15 km), shallowing significantly west of the Mazhar–Tagh Fault to $<$10 km. The HFB is also marked by lateral variations in sedimentary thickness, with the thickest layers beneath the Eastern and Western Gangetic Basins ($\sim$6–8 km) and the thinnest beneath the Indus Basin and Brahmaputra Valley ($<$2 km). These sub-basins are segmented by basement ridges, and the sedimentary thickness variation is controlled by flexural bending of the underthrusting Indian plate beneath the Himalaya.


  • Open Access

    Deformation of the Indian Lithosphere from radial anisotropy: Signatures of laterally varying plate geometry beneath Tibet and hotspot volcanism beneath the Deccan Plateau. 

    by Arijit Chakraborty, Monumoy Ghosh, Siddharth Dey, Shubham Sharma, Sankar N. Bhattacharya, Supriyo Mitra

    The Indian Lithosphere has been shaped by multiple tectonic processes, which include break-up from the Gondwana Supercontinent, traversing over the Reunion and Kerguelen hotspots, collision with Eurasia, and underthrusting beneath the Himalaya and Tibetan Plateau. Seismic velocity structure and radial anisotropy of the lithosphere preserves imprints of these tectonic processes and related deformation. We perform joint-modeling of fundamental-mode Rayleigh (LR) and Love (LQ) wave group-velocity dispersion, for periods between 10 and 120s, to obtain radially anisotropic shear-wave velocity structure across India, Himalaya and Tibet. 1D path-average dispersion curves, computed for ~14700 regional earthquake-receiver raypaths, has been passed through systematic quality control of signal-to-noise ratio (>3), elimination of multipathed energy using polarization analysis, and removal of overtone interference, by synthetic tests. These 1D dispersion data are combined through a tomographic formulation to obtain 2D maps. The tomographic parametrization is done using 4906 nodes as apex of triangular elements of side 1°. LR and LQ fundamental-mode group-velocity dispersion data at these nodes are the observation input to the joint inversion. The inversion is done in 2-steps, first by parameterizing the model as isotropic layers and using an isotropic inversion scheme to obtain the best fitting Vs model; second using this output Vs model into an anisotropic inversion scheme, implemented using Genetic Algorithms (GA). GA exhaustively searches the model-space composed of Vsh, Vph and Xi[Vsh^2/Vsv^2] as free parameters. The fit to both LR and LQ datasets significantly improve in the anisotropic inversion. Results are presented as 2D depth-slice maps and cross-sections constructed using bilinear interpolation. The main findings from our models are lateral variation in the voigt-average Vs beneath the Tibetan Plateau at depth between 80-140 km. Western Tibet has high Vs and positive Xi, while Central-Eastern TIbet has Low Vs and negative Xi. From cross-sections across both regions, we infer that the dip and underthrusting of the Indian Plate beneath Tibet has lateral variation. The high Vs and positive anisotropy in Western Tibet indicates a shallow underthrusting of the Indian lithosphere up to the Tarim Basin, with simple-shear deformation. Where as, the lower Vs and negative anisotropy in Central-Eastern Tibet is a result of partial-underthrusting of India at a steeper-angle up to the Bangong-Nujiang Suture, and pure-shear deformation of thickened Tibet Lithosphere beneath North-Central Tibet. A negative anisotropy signature along the Reunion volcanic track is observed between 100 and 160 km depth. We infer this to be the signature of Reunion hotspot volcanism in the Indian lithosphere caused by the vertical ascent of a huge volume of melt arising from the plume-head. Similar observations are also made beneath the track of the Kergulean hotspot.